11 KiB
11 KiB
Mods
Printer mods for Voron 3D printers Remember to update this README when uploading new mod!
Table structure
Update the following table with the information about your mod:
- Your name
- A link to your sub-folder
- A short description of your mod
- The printer compatibility. Use
:heavy_check_mark:for ✔️,:x:for ❌ and:grey_question:for ❔
like so:
| Creator | [Mod title](link) | Description | :x: | :x: | :x: |
Updating the compatibility matrix
If your mod is lacking a column in the compatibility matrix, feel free to submit a PR to get it updated!
| Creator | Mod title | Description | V1.6 | V2.1 | V2.2 |
|---|---|---|---|---|---|
| 3D_Black | Fan Covers | Different fan covers for 40mm fans | ✔️ | ✔️ | ✔️ |
| Andreq | Mobius Shaft Jig | Tool used for grinding flats on a shaft at specific places | ✔️ | ✔️ | ✔️ |
| Armstr0ng | Led extrusions mount | A mount for aluminium LED extrusions with hidden fasteners | ❔ | ✔️ | ✔️ |
| ArmyAg08 | Logitech C270 Mounts | Different C270 camera mounts, attached to the extrusions | ✔️ | ✔️ | ✔️ |
| Corner Panel Clip | Corner panel clip that fit 3mm or 1/8" panels with foam tape | ❌ | ✔️ | ✔️ | |
| Danowar | Dual Mobius Mount | Mounts two Mobius Extruders to the back of the printer | ✔️ | ✔️ | ✔️ |
| F6 Board Mount | Mounts for FYSETCS F6 controller boards | ✔️ | ✔️ | ✔️ | |
| Humidity Sensor Bracket | Mount for Humidity/Temperature sensor | ✔️ | ✔️ | ✔️ | |
| Load Cell Spool Holder | Spool holder with built in weight scale | ❌ | ✔️ | ✔️ | |
| TL 2-to-1 Mosquito Toolhead Adapter | Mounts the Triangle Labs 2-to-1 adapter directly to the mosquito toolhead | ✔️ | ✔️ | ✔️ | |
| Tablet mount | Detachable mount for tablet using magnets | ✔️ | ✔️ | ✔️ | |
| daveidmx | 30mm Fan Adapter | 30mm Fan Adapter | ❔ | ❔ | ❔ |
| Dunar | Panel Rest | External panel holder | ✔️ | ✔️ | ✔️ |
| etherwalker | Pi Zero Camera Mount | Pi Zero Camera Mount | ❔ | ❔ | ❔ |
| exquyre | Anet 12864 Display | Case for Anet 12864 LCD display | ✔️ | ✔️ | ✔️ |
| LED Bar Mount | Mount for 12V LED bars to the top extrusions | ❔ | ✔️ | ✔️ | |
| Cable Cover Insert | Room for 3-4 20AWG wires | ❔ | ❔ | ❔ | |
| Einsy + RAMPS Combo | Mounting bracket for 1 Einsy and 1 RAMPs | ✔️ | ✔️ | ✔️ | |
| FHeilmann | Voron 2.1 5mm Parts | Parts modified for extrusions with 5mm gap. | ❌ | ✔️ | ❌ |
| Fulg | PanelDue5 LCD Mount | Mount for the PanelDue5 LCD display | ✔️ | ✔️ | ✔️ |
| GSL12 | WAGO 221 Mounts | Wago 221 mounts for the electronics bay | ✔️ | ✔️ | ✔️ |
| Glowtape | MKS GenL 1.0 Mounting Bracket | MKS GenL 1.0 Mounting Bracket | ✔️ | ✔️ | ✔️ |
| GustavTheMighty | 4.3 PanelDue Case | Case/mount for the 4.3 PanelDue LCD Display | ✔️ | ✔️ | ✔️ |
| Hackdoggo | BMGobius | Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears | ✔️ | ✔️ | ✔️ |
| hiemmer | Tool Holders | Tool holder for calipers, screwdriver etc | ❔ | ❔ | ❔ |
| Jass_on | Tempered glass clips/handle | Panel clips and handles for using tempered glass side panels | ❌ | ✔️ | ❔ |
| Rear panel clips | Rear Panel Clips | ❌ | ✔️ | ❔ | |
| SKR 1.3 Cooling bracket | SKR 1.3 mount with built in 40mm fan mount | ✔️ | ✔️ | ✔️ | |
| JeJeff | 2020 Extrusion slot cover | Slot covers for extrusions with 5mm slot width | ✔️ | ✔️ | ✔️ |
| Cable Tie Mount | Cable tie mounts for 4mm cable ties | ✔️ | ✔️ | ✔️ | |
| Main Plug Panel | Main Plug Panel modified to hold a RJ45 ethernet socket | ✔️ | ✔️ | ✔️ | |
| Jink | Coroplast mount | Mount / Bracket supporting the coroplast sheets | ❌ | ✔️ | ❔ |
| Filament runout sensor mount | Filament runout sensor mount | ❌ | ✔️ | ❔ | |
| Left handed RAMPS mount | Mirrored RAMPS bracket | ✔️ | ✔️ | ✔️ | |
| Spool holder with scale | Spool holder with scale | ❌ | ✔️ | ❔ | |
| WAGO Mount | Mount for 3x WAGO connectors | ✔️ | ✔️ | ✔️ | |
| JustinVoelker | Mains Plug Panel with RJ45 | Mains plug panel with ethernet cutout | ✔️ | ✔️ | ✔️ |
| K1JWG | PanelDue 7i Custom Logo | Custom Voron 2 logo for use as a PanelDue 7i startup splash screen | ✔️ | ✔️ | ✔️ |
| Koios | Front Panel Locks | Front panel locks for 6mm tempered glass panels | ❌ | ✔️ | ❔ |
| Logitech C920 Mount | Mount for C920 secured to the top front extrusion | ❔ | ✔️ | ✔️ | |
| LED Mounts | Different mounts for LED light bars | ❔ | ✔️ | ✔️ | |
| nemgrea | Magnetic Split Front Door | Hinges, handles and magnet mounts for creating a split front door panel | ❌ | ✔️ | ❔ |
| OrkusMG | Waveshare 5 Inch LCD Cover | Display Cover for the Waveshare 5 inch HDMI LCD screen | ✔️ | ✔️ | ✔️ |
| pnokel | Cable Zipper | Small mount to secure wires with zip ties | ✔️ | ✔️ | ✔️ |
| Coroplast holders | Different coroplast holders for added support | ❌ | ✔️ | ❔ | |
| Toothed Idler | 14.5mm toothed idler | ❌ | ❌ | ❌ | |
| Railgunner | Dual Direct Drive X Carriage | Dual direct drive using 2x Bondtech BMG | ❔ | ❔ | ❔ |
| Seamen | RAMPS Extender Holder | Mount for RAMPS board with the stepper extender | ✔️ | ✔️ | ✔️ |
| Sparreau | 5V Power Supply Mount | 5V Power Supply Mount | ✔️ | ✔️ | ✔️ |
| FSR Circuit Mount | Bracket for mounting the FSR PCB. | ❌ | ✔️ | ❌ | |
| Z Rail Stop | Z Rail Stop | ❌ | ✔️ | ✔️ | |
| Bed Extrusion Spacer | Bed Extrusion Spacer | ❌ | ✔️ | ✔️ | |
| Dial Indicator Fan Mount | Dial Indicator Fan Mount | ❔ | ❔ | ❔ | |
| Mains Plug Panel Parametric | Scalable mains plug panel with small modifications | ✔️ | ✔️ | ✔️ | |
| Z Idler Frame Extra Tab | An extra tab added to the Z idler to prevent sagging / rotation | ❌ | ✔️ | ❌ | |
| Stephan | M12 Probeholder | Drop in replacement of the stock probe to a M12 | ❔ | ✔️ | ❔ |
| BlTouch Mount | Drop in replacement of the stock probe to a BLTouch | ❔ | ✔️ | ❔ | |
| steve450 | Corner Brackets | Corner brackets preventing rotation of the extrusions, and stiffening the joints. Also covers the Z-belt hole for improved aesthetics | ❔ | ✔️ | ❔ |
| synfinatic | Duet Fan Mount | Duet/Duex fan mount with air vents directly above the steppers to increase airflow | ✔️ | ✔️ | ✔️ |
| E-Stop Switch | Mount for emergency button attached to the top of the printer | ❌ | ✔️ | ❔ | |
| Filament DryBox | Mount for filament drybox attached to the side of the printer | ❌ | ✔️ | ❔ | |
| LED Mount | Mount for LED lightbars | ❔ | ✔️ | ✔️ | |
| PS Extra Bracket | Extra bracket to keep the power supply in place | ❔ | ❔ | ❔ | |
| RJ45 Mount | Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient | ❔ | ❔ | ❔ | |
| warriorofwire | Openbuilds Drag Chain | Collection of models for using an off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck | ❌ | ✔️ | ❌ |
| Direct Drive BMG-m mount | Open toolhead mounting plans for Bondtech BMG-m and Mosquito direct drive combo | ❔ | ✔️ | ❔ | |
| wile.e.coyote | Coroplast Support | Support for the coroplast to prevent sagging | ❌ | ✔️ | ❔ |
| Dual Buck Bracket | Mounting bracket for 2 buck converters | ✔️ | ✔️ | ✔️ | |
| Nozzle Scrubber Mount | Mount for brass brush. Used for cleaning nozzle before printing | ❌ | ✔️ | ✔️ | |
| Wago Mounts | Different mounts for Wago connectors | ✔️ | ✔️ | ✔️ |