15 KiB
First you need to modify the heatsink
## Let's Start the build!
Lets put toghether the hotend. Inset the heatbrake Ideal to be bimetalic and screw the Volcano heat bloke
with the 3 hole that we just made put them in V6_holder_back.stl
use 2x M3 x 4 to secure the heatsink but don't titen them yes
Now let's prepare the Part Cooling Fans.
Remove the top cover from the 4010 blower fan
Just pull it gently it will pop right up
This is how is supposed to rout the fan canles for the one that wi will mount in the right poket
Be carefule to don't pinch the cables
This is how it should look
Now let's mount the fan from the right side
remove the lid and pop it in it oun poket
Part Cooling Fan's are mounted.
Now let's put the hotend in the right place. pay atention to the fan cable to dont pinch it, it has a gove
Install the Iddler door, the shutter and the latch accordingly
Put the Extruder Main body
M3x25
M3x25
M3x25
M3x25
Screw the 3 x M3x25
Install the BMG Gear
This is M3x20 wi will use it in the newxt step after installing the Extruder back plate
Install the bearing from the BMG kit in to the Extruder back plate and put it in place
M3x4 countersunk screw
Screw it
M3 x 6
Sceew the M3x6 and also the M3x20 that i showed you before
Insert the Nema 14 Stepper motor in to the stepper motor cover
Alighn the stepper motor with bmg gear
Using 2x M3x8 secure the Stepper Motor in to the back plate
Using 2x M3x5 secure the stepper motor cover to the extruder back plate
Insert the EBB36 Can Toolboard in to the Can Cover
Use an M3x45 screw to secure the Can cover trowgh the stepper motor cover in to the Extruder back plate.
Using 2xM3x16 secure the can cover in to the stepper motor cover
Here at the back i mounted only 2 set insets to secure the 3010 fan to cool down the canboard and the driver for the extruder.
Down at the bottom we have space for 2 round pcb 5050 neopixels I use RGBW
Insert the spring loaded screw to secure the iddler door
we are missing the 3010 hotend fan but you get the idea this is how it supposed to look when its ready.
