37 lines
1.6 KiB
Markdown
37 lines
1.6 KiB
Markdown
# Legacy Firmware Configurations
|
|
|
|
Firmware Configurations for legacy Voron 3D printers, separated by firmware.
|
|
Remember to update this README when uploading new firmware configurations!
|
|
|
|
## Table structure
|
|
|
|
Update the following table with the information about your mod:
|
|
- Your name
|
|
- A link to your sub-folder
|
|
- A short description of your firmware config
|
|
- The printer compatibility. Use `:heavy_check_mark:` for :heavy_check_mark:,`:x:` for :x: and `:grey_question:` for :grey_question:
|
|
|
|
like so:
|
|
`
|
|
| Creator | [Config Title](link) | Description | :x: | :x: | :x: |`
|
|
|
|
---
|
|
|
|
## Klipper
|
|
|
|
| Creator | Config title | Description | V1.6 | V2.1 | V2.2 |
|
|
| --- | --- | --- | --- | --- | --- |
|
|
| bryansj | [SKR 1.3 V2.2 Extra Settings for Reference](./klipper/bryansj) | Voron Design VORON2.2 300mm SKR 1.3 TMC2209 config with Extra Features Enabled for Reference | :x: | :grey_question: | :heavy_check_mark: |
|
|
| Danowar | [FYSETC F6 1.3 Klipper Config](./klipper/Danowar/FYSETC_F6_V1.3_Klipper_Config) | Klipper config for a FYSETC F6 350 build. UPDATED 11/14/19 | :x: | :heavy_check_mark: | :heavy_check_mark: |
|
|
| IamPerrine | [SKR 1.3 2209s V2.2 with Mods and Added Sections](./klipper/IamPerrine) | Both of my Voron 2.2 Configs with added sections. Loosely based on the Universal Config from eddie. -pinouts are different | :x: | :grey_question: | :heavy_check_mark: |
|
|
|
|
---
|
|
|
|
## RepRapFirmware
|
|
|
|
| Creator | Config title | Description | V1.6 | V2.1 | V2.2 |
|
|
| --- | --- | --- | --- | --- | --- |
|
|
| Norbs | [Duet 2 Config](./reprapfirmware/Norbs) | RRF 3.0 example config | :x: | :heavy_check_mark: | :heavy_check_mark: |
|
|
|
|
---
|