4.3 KiB
4.3 KiB
Mods
Printer mods for Voron 3D printers Remember to update this README when uploading new mod!
Legacy printers
Mods for legacy printers can be found here. If one of your mods applies to a current generation Voron printer, contact the admins in Discord to have your mod moved to this folder.
Table structure
Update the following table with the information about your mod:
- Your name
- A link to your sub-folder
- A short description of your mod
- The printer compatibility. Use
:heavy_check_mark:for ✔️,:x:for ❌ and:grey_question:for ❔
like so:
| Creator | [Mod title](link) | Description | :x: | :x: | :x: |
| Creator | Mod title | Description | V0 | V1.8 | V2.4 |
|---|---|---|---|---|---|
| Badnoob | Precision AB Drive | Changes the gearing for the AB drives to improve both resolution and torque, with a strenthened frame. | ❔ | ❔ | ✔️ |
| Rail Alignment | Tools and procedure to properly align the rails in 2.4 and Afterburner | ❌ | ❌ | ✔️ | |
| Dan88 | V0 one-part Skirts | One part Skirts for the V0 | ✔️ | ❌ | ❌ |
| FreeformFez | V1.8 Filtered Power Inlet | V1.6 Filtered Inlet and Rocker Switch for V1.8 | ❌ | ✔️ | ❌ |
| hijax_pl_ | Corner panel clip | V2 panel corner frames using 3-way L brackets in the corners | ❌ | ❌ | ✔️ |
| Din Rail mount | Adapter to attach DIN Rail to 2020 extrusion. | ❌ | ❌ | ✔️ | |
| Controler Board adapters | DIN (rotated) and legacy adapters for boards like SKR mini E3. | ❔ | ❌ | ✔️ | |
| Kruppes | V0 Printed Deck with inserts | Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo. | ✔️ | ❌ | ❌ |
| mjoaris | 10x11 Cable Chain Endcaps | Printable Endcaps for 10x11 Cable Chains | ❌ | ✔️ | ✔️ |
| Mini12864 LCD Mount | Swiveling case for the Fysetc Mini12864 LCD | ❌ | ❔ | ✔️ | |
| Nomsplease | 60mm Shaft Jig | Simple jig for cutting and grinding 60mm Z shafts | ❌ | ❌ | ✔️ |
| StvPtrsn | Skirts for a 320mm Build | Skirts for a 320mm build | ❌ | ❌ | ✔️ |
| Keystone Jack for Filtered Mains Panel | Add a keystone jack to your filtered mains plug panel | ❌ | ❌ | ✔️ | |
| Side Fan Support, No Tape | Mount the 60mm side fans and inserts without tape | ❌ | ❌ | ✔️ | |
| tameike | Din Rail SKR 90 deg | SKR V1.3 bracket turned 90 degrees | ❌ | ❔ | ✔️ |
| Din Rail 2020 Holder | Attaching DIN Rails to 2020 | ❌ | ❔ | ✔️ | |
| TacoRaven Mounting Frame | TR V0 mount | ✔️ | ❌ | ❌ | |
| Jetpack V0 base | Attach Jetpack to V0 frame | ✔️ | ❌ | ❌ | |
| xbst_ | PCB LED Holder | Very simple mount for some (?) PCB LED Bars | ❌ | ✔️ | ✔️ |
| DIN Mount Omron Relay | A simple DIN rail mount for the BOM Relay | ❌ | ✔️ | ✔️ | |
| DIN Mount Pi 4x Relay Board | A simple DIN rail mount for the 4 channel relay board for Raspberry Pi | ❌ | ✔️ | ✔️ | |
| DIN Mount Max31865 | A simple DIN rail mount for the Adafruit (or SAME SIZE clone) MAX31865 PT100 Board. | ❌ | ✔️ | ✔️ | |
| Heatbed "Hood" Mod | A way of reaching electronics from the top by having a "car hood" style hing for the heatbed, and rotated electronics mounts. | ❌ | ❌ | ✔️ |