73 lines
3.3 KiB
Markdown
73 lines
3.3 KiB
Markdown
# MarcPot Skirt Mods
|
|
|
|
|
|
**WARNING I HAVE NOT TESTED THE 250 and 350 VERSIONS. PLEASE TELL ME IF YOU DID AND I'LL EDIT THIS WARNING.**
|
|
|
|
**WARNING to give the hour counter enough clearance in the 250 version the hour counter will overlap the plug panel, this should not matter. But again, I haven't tested it.**
|
|
|
|
I have checked them all in my slicer and they sliced correctly.
|
|
|
|
Also, if you think the keystones don't fit, try rotating them.
|
|
## Overview
|
|
These are my mods for the Voron V2.4 Skirts. They are modifications of [the official Voron V2.4 skirts](https://github.com/VoronDesign/Voron-2\STLs\VORON2.4\Skirts).
|
|
|
|
## BOM
|
|
* Keystone inserts.
|
|
|
|
**OR**
|
|
|
|
* M3x8 SHCS.
|
|
* [Hour Counter](https://aliexpress.com/item/33010541388.html?)
|
|
|
|
## Printing instructions
|
|
No special printing instructions. They are skirts.
|
|
|
|
## Assembly instructions
|
|
No special Assembly instructions. They are skirts.
|
|
|
|
## Configuration instructions
|
|
For the keystones there are no special configuration instructions. They are plug & play.
|
|
|
|
For the hour counter there are multiple ways to set it up. The simplest way is to add it to Klipper as a heater_fan.
|
|
|
|
```
|
|
# Heater cooling fans (one may define any number of sections with a
|
|
# "heater_fan" prefix). A "heater fan" is a fan that will be enabled
|
|
# whenever its associated heater is active.
|
|
[heater_fan hour_counter]
|
|
pin: CHANGE THIS TO THE CONNECTED PIN NUMBER
|
|
#heater: extruder
|
|
# Name of the config section defining the heater that this hour counter is
|
|
# associated with. If a comma separated list of heater names is
|
|
# provided here, then the fan will be enabled when any of the given
|
|
# heaters are enabled. The default is "extruder".
|
|
heater_temp: 170
|
|
# A temperature (in Celsius) that the heater must drop below before
|
|
# the hour counter is disabled. The default is 50 Celsius.
|
|
#fan_speed: 1.0
|
|
# This should be kept at 1.0
|
|
shutdown_speed: 0.0
|
|
# The desired fan speed (expressed as a value from 0.0 to 1.0) if
|
|
# the micro-controller software enters an error state. This is set
|
|
# to 0.0 so that the counter won't go on while in error state.
|
|
```
|
|
Thanks to hernsl#8860 for showing there is an easier way than macro's.
|
|
|
|
When using a mains powered counter it should be set up using a relay, these relays can be controlled by the SKR's, then you don't have to change anything.
|
|
But when controlling the relay using the Raspberry Pi you need to setup the Pi as MCU.
|
|
Instructions on how to do this can be found at https://www.klipper3d.org/RPi_microcontroller.html
|
|
|
|
Other options are the [Octoprint Enclosure Plugin](https://plugins.octoprint.org/plugins/enclosure/) for the mains counter, and the enclosure plugin + gcode macro's for SKR controller counters.
|
|
|
|
## CAD
|
|
I uploaded the original 300 cad files I created because I did some really ugly things to get to the 250 and 350. So you're probably better of starting at the 300 if you want to edit them yourself. I did save them ofcourse so contact me if you want the files.
|
|
|
|
## Questions
|
|
Reach me in Voron's [Discord](https://discord.gg/xgXWctB) @MarcPot#3983 if you have any questions.
|
|
|
|
## Images
|
|
|
|
|
|
|
|
|