42 lines
1.5 KiB
Markdown
42 lines
1.5 KiB
Markdown
# Firmware Configurations
|
|
|
|
Firmware Configurations for Voron 3D printers, separated by firmware.
|
|
Remember to update this README when uploading new firmware configurations!
|
|
|
|
## Legacy printers
|
|
|
|
Configurations for legacy printers can be found [here](../legacy_printers/firmware_configurations).
|
|
If one of your configurations applies to a current generation Voron printer, contact the admins in
|
|
Discord to have your mod moved to this folder.
|
|
|
|
## Table structure
|
|
|
|
Update the following table with the information about your mod:
|
|
- Your name
|
|
- A link to your sub-folder
|
|
- A short description of your firmware config
|
|
- The printer compatibility. Use `:heavy_check_mark:` for :heavy_check_mark:,`:x:` for :x: and `:grey_question:` for :grey_question:
|
|
|
|
like so:
|
|
`
|
|
| Creator | [Config Title](link) | Description | :x: | :x: | :x: | :x: |`
|
|
|
|
---
|
|
|
|
## Klipper
|
|
|
|
| Creator | Config title | Description | V0 | V1.8 | V2.4 | VSW |
|
|
| --- | --- | --- | --- | --- | --- | --- |
|
|
| revnull | [BTT Octopus Board Pins](./klipper/revnull/btt_octopus_pins) | Defines a set of `[board_pins]` aliases for use with the BTT Octopus controller | :grey_question: | :grey_question: | :heavy_check_mark: | :grey_question: |
|
|
|
|
---
|
|
|
|
## RepRapFirmware
|
|
|
|
| Creator | Config title | Description | V0 | V1.8 | V2.4 | VSW |
|
|
| --- | --- | --- | --- | --- | --- | --- |
|
|
| DorjeDorf | [Duet 3 Config](./reprapfirmware/DorjeDorf) | RRF 3.3 example config | :x: | :x: | :heavy_check_mark: | :x: |
|
|
| fulg | [Duet 2 Config](./reprapfirmware/fulg) | RRF 2.05 example config | :x: | :x: | :heavy_check_mark: | :x: |
|
|
|
|
---
|