12 KiB
12 KiB
Mods
Printer mods for Voron 3D printers Remember to update this README when uploading new mod!
Legacy printers
Mods for legacy printers can be found here. If one of your mods applies to a current generation Voron printer, contact the admins in Discord to have your mod moved to this folder.
Table structure
Update the following table with the information about your mod:
- Your name
- A link to your sub-folder
- A short description of your mod
- The printer compatibility. Use
:heavy_check_mark:for ✔️,:x:for ❌ and:grey_question:for ❔
like so:
| Creator | [Mod title](link) | Description | :x: | :x: | :x: |
| Creator | Mod title | Description | V0 | V1.8 | V2.4 |
|---|---|---|---|---|---|
| aeresov | TL filament sensor bracket | A bracket for TL filament sensor to mount near stock spool holder. | ❌ | ❔ | ✔️ |
| MeanWell UHP-xxx DIN mount | A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount it across 2 DIN rails. | ❌ | ❔ | ✔️ | |
| arkeet | Dial test indicator mount | A toolhead mount for a dial test indicator, where the tip is located at the nozzle. | ❌ | ✔️ | ✔️ |
| Badnoob | Precision AB Drive | Changes the gearing for the AB drives to improve both resolution and torque, with a strenthened frame. | ❔ | ❔ | ✔️ |
| Rail Alignment | Tools and procedure to properly align the rails in 2.4 and Afterburner | ❌ | ❌ | ✔️ | |
| BlueBear | Deck Panel Backpack | A mounting alternative if you don't want to drill your deck panel | ✔️ | ❌ | ❌ |
| d3nny | Filtered Power Plug with RND_165-00057 | Filtered Power Plug for RND 165-00057 and CAT6-Plug | ❌ | ❌ | ✔️ |
| Dan88 | V0 one-part Skirts | One part Skirts for the V0 | ✔️ | ❌ | ❌ |
| DorjeDorf | Duet 3 6HC Din Bracket | V2.4 Duet 3 6HC Din Bracket | ❌ | ❌ | ✔️ |
| Duet 3 3HC Din Bracket | V2.4 Duet 3 3HC Din Bracket | ❌ | ❌ | ✔️ | |
| DrGhetto | Ghetto Panels | Printed panels for the Voron Zero | ✔️ | ❌ | ❌ |
| eddie | V1.8 12mm Z Mod | Add V1.8 option for 12mm Z rods | ❌ | ✔️ | ❌ |
| edwardyeeks | Decontaminator Purge Bucket | Removeable purge bucket | ❌ | ✔️ | ✔️ |
| V2.4 Z Drive Motor Tensioner Mod | Braced motor tensioner for z drive | ❌ | ❌ | ✔️ | |
| Ellis | 15x15 Drag Chain Ends | 15x15 drag chain end pieces | ❔ | ❔ | ✔️ |
| Badge Retractor Mount | Extrusion mount for badge retractor to keep bowden tube out of the way. | ❔ | ❔ | ✔️ | |
| Short Z Joints | Shorter Z joints for the v2.4 | ❌ | ❌ | ✔️ | |
| FreeformFez | V1.8 Filtered Power Inlet | V1.6 Filtered Inlet and Rocker Switch for V1.8 | ❌ | ✔️ | ❌ |
| GSL12 | Pocketwatch Nema 17 | Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe for V0 fork with 2020 extrusions, Nema17 and MGN9 or other printers. | ❔ | ❔ | ❔ |
| hartk1213 | Voron0_deck_panel_with_logo_and_VORON0 | Used @Kruppes blank deck panel to add the logo as well as the name VORON0 | ✔️ | ❌ | ❌ |
| Voron0_display_dualcolor | Added a dual color file for the Voron Display Front housing | ✔️ | ❌ | ❌ | |
| Voron0_C14Inlet | Added a new Power inlet that uses a Fused C14 plug and switch that covers the mains contacts | ✔️ | ❌ | ❌ | |
| Voron0_Hinged_Top_Hat | Created a new hinged top hat design for the V0 so it can fold away when you dont want a top hat on | ✔️ | ❌ | ❌ | |
| hernsl | Bottom Panel Mag Clip | v2.4 magnetic clips to retain bottom panel | ❌ | ❌ | ✔️ |
| hijax_pl_ | Corner panel clip | V2 panel corner frames using 3-way L brackets in the corners | ❌ | ❌ | ✔️ |
| Din Rail mount | Adapter to attach DIN Rail to 2020 extrusion. | ❌ | ❌ | ✔️ | |
| Controler Board adapters | DIN (rotated) and legacy adapters for boards like SKR mini E3. | ❔ | ❌ | ✔️ | |
| jasonc | V2.4 Z-Idler Shoulder Bolt Mod | Modification to the idler carriers to accept a 25mm shoulder bolt. Ideal for Gates idlers. | ❌ | ❌ | ✔️ |
| kirby | V0 Sherpa Mini Direct Drive Mod | A direct drive mod for the V0 using the Annex Sherpa Mini extruder | ✔️ | ❌ | ❌ |
| Kruppes | V0 Printed Deck with inserts | Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo. | ✔️ | ❌ | ❌ |
| littleferris | V0 c14 Skirt Inlet | V0 C14 Skirt inlet | ✔️ | ❌ | ❌ |
| madros | V0 OLED-skirt | V0 skirt with 0.96" OLED | ✔️ | ❌ | ❌ |
| MarcPot | UHP PSU Bracket Clip | DIN rail mount for the Mean Well UHP series PSU. | ❔ | ❔ | ✔️ |
| Hour Counter Skirt + Keystone Skirt | Skirt mod for a mechanical hour counter and keystone inserts | ❌ | ❌ | ✔️ | |
| mjoaris | 10x11 Cable Chain Endcaps | Printable Endcaps for 10x11 Cable Chains | ❌ | ✔️ | ✔️ |
| Mini12864 LCD Mount | Swiveling case for the Fysetc Mini12864 LCD | ❌ | ❔ | ✔️ | |
| Mosher | Door hinges with M3 screws shafts | Simple mod of print in place door hinges, which uses m3 screws as shafts. | ❌ | ❌ | ✔️ |
| natewalck | V1.8 Jigs | Jigs for assembling V1.8 | ❌ | ✔️ | ❌ |
| Nomsplease | 60mm Shaft Jig | Simple jig for cutting and grinding 60mm Z shafts | ❌ | ❌ | ✔️ |
| Duet Wifi Mount | Duet wifi mount in pocketwatch location | ✔️ | ❌ | ❌ | |
| LED Mounts | Basic LED mounts for 10 and 12mm strips | ✔️ | ❌ | ❌ | |
| Remixed Panel Mounts | Remixed rear bottom panel mounts with stop | ✔️ | ❌ | ❌ | |
| Pi Cam/ZeroW Mount | Mount for pi camera and ZeroW | ✔️ | ❌ | ❌ | |
| Pocket Watch Rear Reolcation Bracket | Pocket watch rear reolcation bracket | ✔️ | ❌ | ❌ | |
| randell | Door Hinges | Door hinges that use an M3 bolt for a pin and bolts thru the panel | ❌ | ❌ | ✔️ |
| Microswitch Pod for PCB | Modified endstop pod for use of endstop switches mounted on a PCB | ❌ | ❌ | ✔️ | |
| raymondh | Large Spool Holders | Larger spool holders for KVP spools | ❌ | ✔️ | ✔️ |
| Rhastlyn | Wansview 1080p Camera Mount | A camera mount that replaces the OEM part to allow the camera to be mounted to a 2020 extrusion | ❌ | ❔ | ✔️ |
| 60mm Fan Cover | A easy to install cover for spec 60mm fans originally designed for a 2.4 build | ❌ | ❔ | ✔️ | |
| Slidr | PanzerChain 2.4 | Energychain for V2.4 | ❌ | ❌ | ✔️ |
| Spaghetti-Bolognese | Simplified Z Drive Motor Mount | Z drive motor mount bracket mod to improve pulley to belt alignment | ❌ | ❌ | ✔️ |
| LCD Case Mod | Improvements to the V2.4 mini12864 LCD case inc E-stop button cover | ❌ | ❌ | ✔️ | |
| StvPtrsn | Skirts for a 320mm Build | Skirts for a 320mm build | ❌ | ❌ | ✔️ |
| Keystone Jack for Filtered Mains Panel | Add a keystone jack to your filtered mains plug panel | ❌ | ❌ | ✔️ | |
| Side Fan Support, No Tape | Mount the 60mm side fans and inserts without tape | ❌ | ❌ | ✔️ | |
| tameike | Din Rail SKR 90 deg | SKR V1.3 bracket turned 90 degrees | ❌ | ❔ | ✔️ |
| Din Rail 2020 Holder | Attaching DIN Rails to 2020 | ❌ | ❔ | ✔️ | |
| TacoRaven Mounting Frame | TR V0 mount | ✔️ | ❌ | ❌ | |
| Jetpack V0 base | Attach Jetpack to V0 frame | ✔️ | ❌ | ❌ | |
| warriorofwire | Slenderfan for Afterburner | Lighter, quieter, smaller Afterburner | ❌ | ❌ | ✔️ |
| xbst_ | PCB LED Holder | Very simple mount for some (?) PCB LED Bars | ❌ | ✔️ | ✔️ |
| DIN Mount Omron Relay | A simple DIN rail mount for the BOM Relay | ❌ | ✔️ | ✔️ | |
| DIN Mount Pi 4x Relay Board | A simple DIN rail mount for the 4 channel relay board for Raspberry Pi | ❌ | ✔️ | ✔️ | |
| DIN Mount Max31865 | A simple DIN rail mount for the Adafruit (or SAME SIZE clone) MAX31865 PT100 Board. | ❌ | ✔️ | ✔️ | |
| Car Hood Style Bed Hinge | A way of reaching electronics from the top by having a "car hood" style hinge for the heatbed, and rotated electronics mounts. | ❌ | ❌ | ✔️ | |
| Flat V2.4 Skirts | Flat V2.4 Skirts so a panel without cutouts can be used | ❌ | ❌ | ✔️ | |
| V2.4 Fanless Middle Skirt | A Fanless alternative middle side skirt | ❌ | ❌ | ✔️ | |
| Duct Mount | 100mm/4" ducting mount for ventilation. Also supports umbilical cord and has 3 orientations for bowden adapter. | ❌ | ❌ | ✔️ | |
| HOYMK SSR Mount | Mount for Chinese HOYMK SSR | ✔️ | ❌ | ❌ | |
| ADXL345 V0 Mount | V0 Mount for a ADXL345 module | ✔️ | ❌ | ❌ | |
| Easy Access Rear Panels | New rear panels designed to expose the extruder for easy filament swapping | ✔️ | ❌ | ❌ | |
| Hat LED Mount | Top Hat LED module mount | ✔️ | ❌ | ❌ | |
| ZipClip V0 | Very simple ziptie mount for v0 1515 extrusions | ✔️ | ❌ | ❌ | |
| Screwed Front Door Hinge | Mod to screw the front door panel (instead of VHB) | ✔️ | ❌ | ❌ | |
| DuetZero | Pi Zero mount over a Duet2 for space saving | ✔️ | ✔️ | ✔️ |