zach
/
VoronUsers
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
VoronUsers/printer_mods/Long/Mantis_Dual_5015/STLs/readme.md

3.7 KiB
Raw Blame History

What to Print

**note that Voron 1.8 is only compatible with Dragon hotend at the moment. If you need something else just let me know and I'll work with you.

Hotend Parts Notes
Dragon
(2.4 and Trident)		 Hotend_Mount_Dragon_v1.040.stl
duct_dragon_v1.041_left.stl
duct_dragon_v1.041_right.stl
Magprobe_v0.31_Dragon.stl
Dragon
(Voron 1.8)		 Hotend_Mount_Dragon_v1.040.stl
Duct_v1.037_Left_+2mm.stl
Duct_v1.037_Right_+2mm.stl
Magprobe_v0.31_Dragon.stl
Mosquito hotend_mount_mosquito_30mm_fan_v0.42
duct_dragon_v1.041_left.stl
duct_dragon_v1.041_right.stl
Magprobe_v0.31_Dragon.stl 		The hotend mount is located in usermods
Thanks to Wingzero for making Mosquito Compatible!
Crazy Volcano with Dragon Heatsink Hotend_Mount_Dragon_v1.040.stl
duct_dragon_crazy_volcano_v1.0_left.stl
duct_dragon_crazy_volcano_v1.0_right.stl
Magprobe_v0.31_RapidoHF_and_CrazyVolcano.stl
Rapido HF Hotend_Mount_Rapido_v.03.stl
duct_rapido_HF_v0.03b_left.stl
duct_rapido_HF_v0.03b_right.stl
Magprobe_v0.31_RapidoHF_and_CrazyVolcano.stl 		Print the hotend mount (Hotend_Mount_Rapido_v.03.stl or Hotend_Mount_Rapido_v.03_Rotated120Degrees.stl) that allows you to mount the Rapido hotend so that the wires come out right/forward and the logo of the sock faces directly forward.
Because the Rapido uses FOUR screws on the top of the heatsink, and THREE screws to mount the heater to the heatsink, the orientation of the hotend mount versus the heater wire can vary. The Part cooling ducts for Rapido have been optimized so that the Phaetus logo on the sock should point directly forward (yes the sock is asymmetrical).
Rapido UHF Hotend_Mount_Rapido_v.03.stl
duct_rapido_UHF_v0.03b_left.stl
duct_rapido_UHF_v0.03b_right.stl
Magprobe_v0.31_RapidoUHF.stl 		See the RapidoHF notes on which hotend mount to print.
Don't forget you will need to switch between magprobes if you switch between UHF and HF variant of the Rapido.

The Rest

  • Carriage
    • Carriage_MGN12_v1.040.stl
    • Carriage_MGN9_v1.0.stl
  • Cable/Umbilical Chain
    • Cable Chain Mounts
      • IGUS - Chain_Anchor_v3.1_IGUS.stl
      • China - Chain_Anchor_v3.2.stl
    • Umbilical Mount - Umbilical_Mount_v2.stl
    • Also see the usermods for other potential options.
  • Duct_Brace_v1.0.stl can be used to connect the upper duct arms together (notes in final_assembly.md of the readme).
  • Gantry or bed extrusion mag probe dock.
    • Gantry
      • Magprobe_Gantry_Extrusion_Mount_by_JosAr_v1.stl
      • Magprobe_Gantry_Dock_Mount_by_JosAr_v1.stl
      • Dock arms (I recommend the single magnet unless you have issues with your probe falling out during prints)
        • Magprobe_Gantry_Dock_Arm_v1.5_Single_magnet.stl
        • Magprobe_Gantry_Dock_Arm_v1.5_double_magnet.stl
    • Bed Extrusion
      • Magprobe_Dock_Arms_v1.5.stl
      • Magprobe_Dock_Mount_v1.0.stl