63a082498c
* Tircown's repository and mods. Add Tircown's repository. Add 3 mods in: - Tiltable mount for a 5" display in skirts - Plug panels with raspberry in vertically - DIN bracket for the Meanwell RS-15-5 PSU * Fix validation errors for existing mods Fix facets reversed for: display5inch_front_rear_skirt_a_350.stl display5inch_front_rear_skirt_a_300.stl display5inch_arm_b.stl * Readme changes Display_mount_5inch: add instructions to remove built-in support Raspberry_plug_panel: add instructions with description of hardware * Fix thin wall Fix thin wall in display5inch_case.stl and display5inch_case_moretolerance.stl Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com> |
||
|---|---|---|
| .. | ||
| Images | ||
| plug_panel_raspberry_bracket.stl | ||
| plug_panel_with_raspberry_DD11.stl | ||
| plug_panel_with_raspberry_filtered_rocker.stl | ||
| plug_panel_with_raspberry_unfiltered.stl | ||
| readme.md | ||
readme.md
Voron 2.4 Raspberry vertically installed in plug panel
For the DD11 version I used this reference: SCHURTER DD11.0113.1111 Many other versions of SHURTER DDXX plugs are compatible. Check out sizes on datasheet.
Instructions
- Put three M3 threaded inserts in the back of the panel.
- Install the pi on the bracket with three M2x10 self tapping screws.
- Pass the USB cable(s) for inner components such as SKR before attaching the bracket to the panel. There is a notch on the side of the opening for the raspberry to that purpose.
- Use three M3x8 to attach the bracket to the raspberry. The rest of the installation is pretty similar to the original bracket: check the official manual.
