27 lines
837 B
Markdown
27 lines
837 B
Markdown
Dial test indicator mount for Afterburner
|
|
=========================================
|
|
|
|
This replaces the Afterburner toolhead with a dovetail mount for a dial test
|
|
indicator (such as a Mitutoyo 513-404, which this was modelled on). The
|
|
indicator point is ideally located at the same position as the nozzle (the
|
|
precise Y position may vary depending on the length of the tip). There is a
|
|
protrusion where the nozzle would be located, so that Z homing can be done
|
|
normally as though a nozzle were present.
|
|
|
|
This can be used, for instance, to verify whether a mesh reflects the true
|
|
form of the bed surface: sweeping the bed with the mesh enabled would ideally
|
|
show no movement on the indicator.
|
|
|
|
Required hardware
|
|
-----------------
|
|
|
|
- M3x8 SHCS (4x)
|
|
- M3 hex nut (2x)
|
|
|
|
Images
|
|
------
|
|
|
|
|
|
|
|
|