VoronUsers/legacy_printers/printer_mods

Legacy Mods

Printer mods for legacy Voron 3D printers Remember to update this README when uploading new mod!

Table structure

Update the following table with the information about your mod:

• Your name
• A link to your sub-folder
• A short description of your mod
• The printer compatibility. Use :heavy_check_mark: for ✔️,:x: for ❌ and :grey_question: for ❔

like so: | Creator | [Mod title](link) | Description | :x: | :x: | :x: |

---

Creator	Mod title	Description	V1.6	V2.1	V2.2
3D_Black	Fan Covers	Different fan covers for 40mm fans	✔️	✔️	✔️
agsolino	RunOut Filament Holder	Holder for TriangleLab Runout sensor	❔	❔	✔️
	RS-25-5 Rotated	RS-25-5 PSU mount rotated 90 Degrees	❔	❔	✔️
Andreq	Mobius Shaft Jig	Tool used for grinding flats on a shaft at specific places	✔️	✔️	✔️
Armstr0ng	Led extrusions mount	A mount for aluminium LED extrusions with hidden fasteners	❔	✔️	✔️
ArmyAg08	Logitech Camera Mounts	Different Logitech camera mounts, attached to the extrusions. Fits C270 and C310	✔️	✔️	✔️
	Corner Panel Clip	Corner panel clip that fit 3mm or 1/8" panels with foam tape	❌	✔️	✔️
Badnoob	Serial Plate	Modified skirt piece to display your serial number	❌	❌	✔️
bryansj	Rotated Pi Mount with Heatsink	Raspberry Pi with Heatsink Frame for minimal channel width	✔️	✔️	✔️
	Keystone Jack Universal Skirt Insert	Keystone Jack Insert to fit into any hexagonal hole in the skirt	✔️	✔️	✔️
	Befenybay Chain Anchors	Befenybay 10x11 Drag Chain Top Anchor and 2020 Extrusion Mount	❌	✔️	✔️
blamm	Blind Joint Drilling Jigs	Jigs to drill your blind joints in the right spot	✔️	✔️	✔️
	HEPA Filter Housing	HEPA Filter Housing for cheap Roomba filters	✔️	✔️	✔️
	Relay module bracket	Relay module (4 channel) mount	✔️	✔️	✔️
cadriel	Triangle Lab Filament Sensor Mount	Triange Lab filament sensor mounts	❔	❔	✔️
Cerulean	Respooler	Respool tangled spools or bad koils	✔️	✔️	✔️
chilicoke	Low Profile Exhaust Duct	Quick-release exhaust duct adapter that requires minumal rear spacing	❔	✔️	✔️
christophmuellerorg	Duet Maestro mount for Voron 2.2	Duet Maestro mount for V2.2	❌	❔	✔️
	FYSETC Panel Due 5i	Standard LCD compatible holder for the FYSETC integrated panel due	❌	❔	✔️
	Mains plug panel for the RND_165-00057	Mains plug panel for the RND_165-00057 Filter/Switch combination	❌	❔	✔️
Danowar	Dual Mobius Mount	Mounts two Mobius Extruders to the back of the printer	✔️	✔️	✔️
	F6 Board Mount	Mounts for FYSETCS F6 controller boards	✔️	✔️	✔️
	Humidity Sensor Bracket	Mount for Humidity/Temperature sensor	✔️	✔️	✔️
	Load Cell Spool Holder	Spool holder with built in weight scale	❌	✔️	✔️
	TL 2-to-1 Mosquito Toolhead Adapter	Mounts the Triangle Labs 2-to-1 adapter directly to the mosquito toolhead	✔️	✔️	✔️
	Tablet mount	Detachable mount for tablet using magnets	✔️	✔️	✔️
	V2.2 Wrench	3 sided wrench for 2.2 bearing caps and panel clips	❌	❌	✔️
	Alternative Z Chain	Alternative mounting for Z-Axis zipchain	❌	✔️	✔️
daveidmx	30mm Fan Adapter	30mm Fan Adapter	❔	❔	❔
Dunar	Panel Rest	External panel holder	✔️	✔️	✔️
etherwalker	Pi Zero Camera Mount	Pi Zero Camera Mount	❔	❔	❔
exquyre	Anet 12864 Display	Case for Anet 12864 LCD display	✔️	✔️	✔️
	LED Bar Mount	Mount for 12V LED bars to the top extrusions	❔	✔️	✔️
	Cable Cover Insert	Room for 3-4 20AWG wires	❔	❔	❔
	Einsy + RAMPS Combo	Mounting bracket for 1 Einsy and 1 RAMPs	✔️	✔️	✔️
FHeilmann	Voron 2.1 5mm Parts	Parts modified for extrusions with 5mm gap.	❌	✔️	❌
Fulg	PanelDue5 LCD Mount	Mount for the PanelDue5 LCD display	✔️	✔️	✔️
GSL12	WAGO 221 Mounts	Wago 221 mounts for the electronics bay	✔️	✔️	✔️
Gamsche	Keystone Skirt Panel	25mm skirt panel with integrated keystone jack. Use with 50mm smaller adjacent skirts for proper fit.	❔	❔	✔️
Glowtape	MKS GenL 1.0 Mounting Bracket	MKS GenL 1.0 Mounting Bracket	✔️	✔️	✔️
GustavTheMighty	4.3 PanelDue Case	Case/mount for the 4.3 PanelDue LCD Display	✔️	✔️	✔️
Iakabos	c920_Mount	Slim mount for logitech c920 webcam	❔	✔️	✔️
	Mini12864 Display Mount	Case and mounting arms for a Fysetc Mini12864 display	❔	✔️	✔️
Hackdoggo	BMGobius	Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears	✔️	✔️	✔️
hiemmer	Tool Holders	Tool holder for calipers, screwdriver etc	❔	❔	❔
JaredC01	Mini 12864 Voron Knob	Upgraded knob for Fystec Mini 12864 RGB LED Display	✔️	✔️	✔️
	Keystone Power Panel	Power Panel with 1 or 2 Keystone Jacks	❌	✔️	✔️
	Mosfet Mounts	Mosfet Mount for 4 or 6 Mosfets	✔️	✔️	✔️
Jasperkm	5mm panel mounting	Edited panel clips for 4mm panel + 1mm foam tape	❌	✔️	✔️
	Brush holder	Brush holder next to printbed	❌	✔️	✔️
	Cable management	Cable trunking and 2020 slot cover	❌	✔️	✔️
	Exhaust fan guard	VORON styled fan guard for exhaust fan 120mm	❌	✔️	✔️
	Fire alarm mount	Mount for a small fire alarm on the back of the printer	✔️	✔️	✔️
	LED strip holder	Mount for led strips at an angle at the top of the printer	✔️	✔️	✔️
	Panel key wrench	Wrench for panel keys for ease of turning	❌	✔️	✔️
	Simple tool holder	Holder for 3 small tools using magnets	✔️	✔️	✔️
	Skirt mods	Some mods the skirts for fans and a clock	❌	✔️	✔️
Jass_on	Tempered glass clips/handle	Panel clips and handles for using tempered glass side panels	❌	✔️	❔
	Rear panel clips	Rear Panel Clips	❌	✔️	❔
	SKR 1.3 Cooling bracket	SKR 1.3 mount with built in 40mm fan mount	✔️	✔️	✔️
JeJeff	2020 Extrusion slot cover	Slot covers for extrusions with 5mm slot width	✔️	✔️	✔️
	Cable Tie Mount	Cable tie mounts for 4mm cable ties	✔️	✔️	✔️
	Main Plug Panel	Main Plug Panel modified to hold a RJ45 ethernet socket	✔️	✔️	✔️
Jink	Coroplast mount	Mount / Bracket supporting the coroplast sheets	❌	✔️	❔
	Filament runout sensor mount	Filament runout sensor mount	❌	✔️	❔
	Left handed RAMPS mount	Mirrored RAMPS bracket	✔️	✔️	✔️
	Spool holder with scale	Spool holder with scale	❌	✔️	❔
	WAGO Mount	Mount for 3x WAGO connectors	✔️	✔️	✔️
JustinVoelker	Mains Plug Panel with RJ45	Mains plug panel with ethernet cutout	✔️	✔️	✔️
K1JWG	PanelDue 7i Custom Logo	Custom Voron 2 logo for use as a PanelDue 7i startup splash screen	✔️	✔️	✔️
Koios	Front Panel Locks	Front panel locks for 6mm tempered glass panels	❌	✔️	❔
	Logitech C920 Mount	Mount for C920 secured to the top front extrusion	❔	✔️	✔️
	LED Mounts	Different mounts for LED light bars	❔	✔️	✔️
manfre	Openbuild chain ends	Cable chain ends to use off the shelf chains with Voron parts	❌	✔️	✔️
masgar	VoltAmpMeter panel insert	Mounting panel for VoltAmpMeter	✔️	❌	❌
	BTT SKR Mini v1.1 mounting frame	Mounting frame for BigTreeTech SKR Mini v1.1	✔️	✔️	✔️
	2-in-1 hotend housing	Front/Rear toolhead housing for XCR3D/BTT/BIQU 2-in-1 hotend	✔️	✔️	✔️
meteyou	Gcode Buttons	Buttons in the skirt to execute gcode	❔	✔️	✔️
mildw4ve	Beltchain Remake	Beltchain Remake for Voron 2.2	❌	❌	✔️
	IR Probe Mount	DUET IR Probe Mount	❌	❌	✔️
nemgrea	Magnetic Split Front Door	Hinges, handles and magnet mounts for creating a split front door panel	❌	✔️	❔
OrkusMG	Waveshare 5 Inch LCD Cover	Display Cover for the Waveshare 5 inch HDMI LCD screen	✔️	✔️	✔️
PhilLeMint	c920 Mount	c920 Camera Mount	❔	✔️	✔️
	Panel Mounting	Panel Clips for 3/32" Foam Tape	❔	✔️	✔️
	Dual LED Light Mount	Mounts for Dual LED Bar	❔	✔️	✔️
	Velocity Stack	Velocity Stack Fan Cover	❔	✔️	✔️
	Indicator Mount	Mount for Indicator	❔	✔️	✔️
pnokel	Cable Zipper	Small mount to secure wires with zip ties	✔️	✔️	✔️
	Coroplast holders	Different coroplast holders for added support	❌	✔️	❔
	Toothed Idler	14.5mm toothed idler	❌	❌	❌
przybybr	V2.1 Omron Mount	Mount for Omron probe in V2.1	❔	✔️	❌
Railgunner	Dual Direct Drive X Carriage	Dual direct drive using 2x Bondtech BMG	❔	❔	❔
Randommen96	LCD bracket extended	LCD bracket extended for 6mm panels	❔	❔	✔️
	Led strip mount DIODER	Led strip mount for Ikea Dioder	❔	❔	✔️
	PSU bracket	PSU AIO bracket for 5v, 12v and 24v	❔	❔	✔️
	Raspi cam mount	Cam mount for alie raspi cams	❔	❔	✔️
schlank	Turbocharger	Alternative fumes extraction solution	❌	✔️	✔️
	Minima	Minimalistic Fysetc Mini12864 display mount	❌	❔	✔️
Seamen	RAMPS Extender Holder	Mount for RAMPS board with the stepper extender	✔️	✔️	✔️
Slidr	Panzer Chain	Alternative energie chain	❔	❔	✔️
Sparreau	5V Power Supply Mount	5V Power Supply Mount	✔️	✔️	✔️
	FSR Circuit Mount	Bracket for mounting the FSR PCB.	❌	✔️	❌
	Z Rail Stop	Z Rail Stop	❌	✔️	✔️
	Bed Extrusion Spacer	Bed Extrusion Spacer	❌	✔️	✔️
	Dial Indicator Fan Mount	Dial Indicator Fan Mount	❔	❔	❔
	Mains Plug Panel Parametric	Scalable mains plug panel with small modifications	✔️	✔️	✔️
	Z Idler Frame Extra Tab	An extra tab added to the Z idler to prevent sagging / rotation	❌	✔️	❌
sporadic	10x15 Chain Z Mounts	End Z mounts for 10x15 Befenybay Drag Chain	❔	✔️	❔
	30A Relay Mount	Mount for a 30A relay module available on Amazon	❔	✔️	✔️
	Dual RS-25 Mount	Dual mount for side by side RS-25 supplies	❔	✔️	✔️
	Dual SKR 1.3 Mounts	Dual mounts for side by side SKR 1.3 controllers with fan and fanless options	❔	✔️	✔️
	Wago 221-415 Mount	Mount for a single Wago 221-415	❔	✔️	✔️
Stephan	M12 Probeholder	Drop in replacement of the stock probe to a M12	❔	✔️	❔
	BlTouch Mount	Drop in replacement of the stock probe to a BLTouch	❔	✔️	❔
steve450	Corner Brackets	Corner brackets preventing rotation of the extrusions, and stiffening the joints. Also covers the Z-belt hole for improved aesthetics	❔	✔️	❔
synfinatic	Duet Fan Mount	Duet/Duex fan mount with air vents directly above the steppers to increase airflow	✔️	✔️	✔️
	E-Stop Switch	Mount for emergency button attached to the top of the printer	❌	✔️	❔
	Filament DryBox	Mount for filament drybox attached to the side of the printer	❌	✔️	❔
	LED Mount	Mount for LED lightbars	❔	✔️	✔️
	PS Extra Bracket	Extra bracket to keep the power supply in place	❔	❔	❔
	RJ45 Mount	Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient	❔	❔	❔
Trippinonaduck	Switch Holder	Holder for Anit-Vandal Switches mounted in skirt holes	❌	✔️	✔️
	LRS-75-5	Mount for LRS-75-5 Power Supply	✔️	✔️	✔️
warriorofwire	Openbuilds Drag Chain 2.1	Off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck	❌	✔️	❌
	Openbuilds Drag Chain 2.2	Off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck	❌	❌	✔️
	Direct Drive BMG-m mount	Open toolhead mounting plans for Bondtech BMG-m and Mosquito direct drive combo	❔	✔️	✔️
wile.e.coyote	Coroplast Support	Support for the coroplast to prevent sagging	❌	✔️	❔
	Dual Buck Bracket	Mounting bracket for 2 buck converters	✔️	✔️	✔️
	Nozzle Scrubber Mount	Mount for brass brush. Used for cleaning nozzle before printing	❌	✔️	✔️
	Wago Mounts	Different mounts for Wago connectors	✔️	✔️	✔️
Xile	AfterBurner Umbilical	Supports a umbilical setup, on AB, taking the strain off connectors	❔	❔	✔️

---