Fix validation errors for existing mods (#144)

This commit fixes all pre-existing corrupt STL issues, as well as all dangling markdown errors.
From now on github actions should ensure that the repo stays clean.

* Fix corrupt STLs
* Remove mod whose STLs were unfixeable
* Fix validator markdown warnings

legacy_printers/printer_mods/README.md

@@ -93,8 +93,7 @@ like so:
 | |[Logitech C920 Mount](./Koios) |Mount for C920 secured to the top front extrusion |:grey_question: |:heavy_check_mark: | :heavy_check_mark:|
 | |[LED Mounts](./Koios) |Different mounts for LED light bars |:grey_question: |:heavy_check_mark: | :heavy_check_mark:|
 |manfre |[Openbuild chain ends](./manfre/cable_chains) |Cable chain ends to use off the shelf chains with Voron parts |:x: |:heavy_check_mark: |:heavy_check_mark: |
-|masgar |[Direct Drive for 1.6.2](./masgar/V1.6.2_direct_drive) | Remix of 1.6.2 toolhead and Afterburner | :heavy_check_mark: | :x: | :x: |
-| |[VoltAmpMeter panel insert](./masgar/VoltAmpMeter_Panel_Insert)   | Mounting panel for VoltAmpMeter | :heavy_check_mark: |:x: |:x: |
+|masgar |[VoltAmpMeter panel insert](./masgar/VoltAmpMeter_Panel_Insert)   | Mounting panel for VoltAmpMeter | :heavy_check_mark: |:x: |:x: |
 | |[BTT SKR Mini v1.1 mounting frame](./masgar/BTT_SKR_Mini_v1.1_mounting_frame)   | Mounting frame for BigTreeTech SKR Mini v1.1 | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
 | |[2-in-1 hotend housing](./masgar/2-in-1_hotend_housing)   | Front/Rear toolhead housing for XCR3D/BTT/BIQU 2-in-1 hotend | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
 |meteyou |[Gcode Buttons](./meteyou/gcode_buttons) |Buttons in the skirt to execute gcode |:grey_question: |:heavy_check_mark: |:heavy_check_mark: |
@@ -150,7 +149,6 @@ like so:
 | |[Dual Buck Bracket](./wile.e.coyote)   |Mounting bracket for 2 buck converters | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
 | |[Nozzle Scrubber Mount](./wile.e.coyote) | Mount for brass brush. Used for cleaning nozzle before printing |:x: | :heavy_check_mark: |:heavy_check_mark: |
 | | [Wago Mounts](./wile.e.coyote)  | Different mounts for Wago connectors | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |
-| xbst_ | [PCB LED Holder](./xbst_/LED_Holder)| Very simple mount for some (?) PCB LED Bars | :grey_question: |:heavy_check_mark: |:heavy_check_mark: |
 | Xile | [AfterBurner Umbilical](./XIle) | Supports a umbilical setup, on AB, taking the strain off connectors | :grey_question: | :grey_question: | :heavy_check_mark: |
 
 ---

legacy_printers/printer_mods/masgar/README.md

@@ -1,6 +1,6 @@
 ### Dirtree
 
-- V1.6.2_direct_drive: contains model and docs of Voron 1.6.2 Direct Drive
+
 - voltamp_box_panel_insert: contains model for volt/amp meter to insert into front skirt
 - BTT_SKR_Mini_v1.1_mounting_frame: contains model for BTT SKR Mini v1.1 mounting frame
 - 2-in-1_hotend_housing: contains model of housing for 2-in-1 hotend

legacy_printers/printer_mods/masgar/V1.6.2_direct_drive/README.md

@@ -1,41 +0,0 @@
-### Parts details
-
-- extruder_body_V6_: To mount E3D V6.
-- extruder_body_mosquito: To mount Mosquito
-- extruder_motor_plate: height changed from original Afterburner extruder_motor_plate to avoid the crankshaft of the motor touch  the filament
-- [a]_toolhead_front_plate: remix of original v1.6 front plate to fit new extruder body and motor plate
-
-### Complete with following original parts:
-
-From Voron 1.6.2 STL:
-- v6_+_mosquito_cooling_fan_duct_left
-- v6_+_mosquito_cooling_fan_duct_right
-- v6_toolhead_housing_front (for V6)
-- mosquito_toolhead_housing_front (for Mosquito)
-
-From Afterburner STL:
-
-- _guidler
-- _latch
-- latch_shuttle
-
-### Print parameters
-
-as per Voron specifications:
-
-- Layer height: 0.2
-- Infill: 50% or more
-- Infill type: Grid
-- Perimeters: 4 or more
-- Top/Bottom solid layers: 5 or more
-- Filament: ABS/ABS+
-
-### Naming convention
-as per Voron specifications files beginning by _ is alternate color, other files are main color.
-
-### Assembly guide
-Follow v1.6 and Afterburner manuals for more specification. Attached you find a PDF with what I did.
-
-![1](./images/01.jpg?raw=true "")
-![2](./images/02.jpg?raw=true "")
-![3](./images/03.jpg?raw=true "")

printer_mods/xbst_/Bed_Hinge/README.md

@@ -22,4 +22,4 @@ You will also need 2 metal corner brackets, some screws, nuts and tnuts to attac
 
 ## Instructions
 Video Instructions: [Youtube](https://youtu.be/YtxrM_qPr9c) *(live on 29 May 2020)*
-Written version: [MANUAL.pdf](./MANUAL.pdf)
+Written version: [MANUAL.pdf](./Manual.pdf)