27 lines
1.4 KiB
Markdown
27 lines
1.4 KiB
Markdown
Afterburner MGN12 Carriage with Integrated Euclid Probe
|
|
=======================================================
|
|
|
|
Euclid Probe by [nionio6915 (Github)](https://github.com/nionio6915/Euclid_Probe), https://www.euclidprobe.com/
|
|
|
|
|
|
|
|
This is a modified version of the MGN12 carriage for a Voron Trident or modded Voron 2.4 with a cutout for mounting the upper Euclid PCB.
|
|
|
|
|
|
|
|
Other than requiring a Euclid Probe, the only additional parts needed for the MGN12 carriage are two M3 heatset inserts for mounting the upper PCB.
|
|
|
|
When installed, the Euclid's magnets should barely protrude from the bottom of the carriage.
|
|
|
|
|
|
|
|
The JST connector should be easily accessible from above
|
|
|
|
|
|
|
|
### Probe Dock
|
|
|
|
The Euclid Probe project has Voron docks available on
|
|
[euclidprobe.com](https://www.euclidprobe.com/02-probe-docks-toolboard-mounts/), under "Mounts & Docks by Printers" > "Voron 2.4 / Voron Trident"
|
|
|
|
The available docks mount to the bed rails, removing the probe from the motion plane after moving up in the Z axis. Adjustment should be performed to move the dock along your maximum Y position to avoid errant pickups as much as possible. |