11 lines
988 B
Markdown
11 lines
988 B
Markdown
These files are for printed replacement chains for the z-axis on V0 printers.
|
|
The original "stock" parts were created by Tinpec and included here for convenience.
|
|
|
|
The modified "anchor" pieces replace both the original "top" and "adapter pieces.
|
|
You only need one anchor piece; there are two slightly different versions, with one having more clearance for bulky wires and the other being a little more polished.
|
|
|
|
The "link_slotted" piece is intended to replace some of the original links towards the lower end of the chain where it will not move. They slot into the 1515 extrusions.
|
|
|
|
In summary, for a stock build size you will need one "stock_bottom", 18 "links" (with up to 8 being the "slotted" variant), and one top anchor (this can be "anchor_closed", "anchor_open", or both of "top" and "adapter"
|
|
To assemble this chain you will also need a small length of 6mm 2GT belt and some 1.75mm filament to capture the belt in the end links. The belt you use for this can be of any quality.
|