40 lines
1.4 KiB
Markdown
40 lines
1.4 KiB
Markdown
|
|
# Matchstick Diffuser
|
|
|
|
A diffuser for the Daylight/Rainbow on a Matchstick LEDs
|
|
|
|
|
|
|
|
|
|
## Compatibility
|
|
|
|
These mounts are only designed to fit the [Daylight-on-a-matchstick](https://github.com/VoronDesign/Voron-Hardware/tree/master/Daylight/Daylight_on_a_matchstick) and
|
|
[Rainbow-on-a-matchstick](https://github.com/VoronDesign/Voron-Hardware/tree/master/Daylight/Rainbow_on_a_matchstick) LEDs. Compatibility is not guaranteed with other
|
|
designs.
|
|
|
|
These prints require slightly larger than a 120x120 bed, so they cannot be printed on a V0, though they are designed to be used on one.
|
|
|
|
|
|
### BOM
|
|
|
|
| Item | Qty |
|
|
|:------------------------|----:|
|
|
| M3 Heatset Insert | 4 |
|
|
| M3x6 BHCS | 4 |
|
|
|
|
|
|
### Printing
|
|
|
|
- Print one of each `main_body_daylight_A.stl` and `main_body_daylight_B.stl` if you have Daylight on a Matchstick
|
|
- Print one of each `main_body_rainbow_A.stl` and `main_body_rainbow_B.stl` if you have Rainbow on a matchstick
|
|
- Print 2 `[c]_diffuser_x2.stl` in a clear or white filament.
|
|
- Print 4 of either `top_mount_clip_x4.stl` *or* `bottom_mount_clip_x4.stl` depending on where you intend to mount the LEDs.
|
|
|
|
|
|
### Assembly
|
|
|
|
- Insert heatset inserts into the clips
|
|
- Insert matchstick led strip into main body
|
|
- Using M3x6 BHCS, fasten the clips to the back of the leds
|
|
- Insert the diffuser into the main body
|