23 lines
1.2 KiB
Markdown
23 lines
1.2 KiB
Markdown
# Voron v2.4 Sturdy Handles
|
|
|
|
I wanted handles for the v2.4 that were a bit more sturdy than I've been able to find and that didn't act as a clip for the panels. That's what I have the clips for :). This is a modified v2.2 handle that has 4 anchor points. It will not work on the bottom extrusions if you're using skirts, but should anywhere that has access to 2 adjacent sides of an extrusion. It has 6mm of clearance on the side that will go over the panel slightly.
|
|
|
|
<div align="center">
|
|
<img src="images/side_profile.png" height=400>
|
|
<img src="images/offset_profile.png" height=400>
|
|
<img src="images/photo.png" height=400>
|
|
</div>
|
|
|
|
## Parts Required
|
|
| Part | Quantity | Comment|
|
|
|------|------|--------|
|
|
| M5 X 12 SHCS | 2 | |
|
|
| M5 T-Nut | 2 | |
|
|
|
|
## Printing
|
|
|
|
- Print using standard Voron part settings and in the orientation used in the STL
|
|
- Supports should not be needed, but the overhang is < 45 degrees. That area is hidden from view and tolerances don't really matter there. Regardless, it prints clean for me.
|
|
|
|
## Installation
|
|
- You will likely need to move the top panel out of the way for installation. I just removed clips from one side and the middle to lift it up a bit. |