zach
/
VoronUsers
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
VoronUsers/printer_mods/LoCoCNC/3mm_tophat_panel_parts
History
Florian Heilmann 9297c345a3 Add STL section to all metadata files 2024-01-08 17:38:25 +01:00
..
.metadata.yml Add STL section to all metadata files 2024-01-08 17:38:25 +01:00
Front_and_Rear_Midclip_3mm_Panels_x2.stl Update with 3mm Panel Clips for using Printed Solid or other thicker panels on the Top Hat of V0.1 (#318) 2021-05-22 17:12:10 -04:00
Left_and_Right_Midclip_3mm_Panels_x2.stl Update with 3mm Panel Clips for using Printed Solid or other thicker panels on the Top Hat of V0.1 (#318) 2021-05-22 17:12:10 -04:00
Lower_Corner_1_and_3_Clip_3mm_Panels_x2.stl Update with 3mm Panel Clips for using Printed Solid or other thicker panels on the Top Hat of V0.1 (#318) 2021-05-22 17:12:10 -04:00
Lower_Corner_2_and_4_Clip_3mm_Panels_x2.stl Update with 3mm Panel Clips for using Printed Solid or other thicker panels on the Top Hat of V0.1 (#318) 2021-05-22 17:12:10 -04:00
Readme.md Typo correction, 1/8" not 1.8" (#322) 2021-05-22 17:50:44 -04:00
Upper_Corner_1_and_3_Clip_3mm_Panels_x2.stl Update with 3mm Panel Clips for using Printed Solid or other thicker panels on the Top Hat of V0.1 (#318) 2021-05-22 17:12:10 -04:00
Upper_Corner_2_and_4_Clip_3mm_Panels_x2.stl Update with 3mm Panel Clips for using Printed Solid or other thicker panels on the Top Hat of V0.1 (#318) 2021-05-22 17:12:10 -04:00

Readme.md

Printed Solid sells 1/8" (3mm+), these do not work with the spec parts. I modifed all the "clamps" to accommodate 1.5mm extra (you can then shim as needed, I did not have to after carefully deburring all parts) Printed and Tested! Makes the assembly actually fit on the printer as intended perfectly.