31 lines
1.4 KiB
Markdown
31 lines
1.4 KiB
Markdown
# Klicky Usermods
|
|
|
|
[## Klicky Probe with additional holes](./StefanRaatz/) by StefanRaatz
|
|
|
|
This is a modified Klicky probe with two holes so that you can feed through the uninsulated part of the cable a little bit more.
|
|
Gave me better contact
|
|
|
|
[## KlickyVoron 2.4 Direct Mount MGN12 X Carriage](./bluedragonx/) by bluedragonx
|
|
|
|
This is a modified MGN12 X carriage for the Voron 2.4 which directly interfaces
|
|
with the Klicky. This is based on [Arkeet's MGN12 carriage](https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/arkeet/mgn12)
|
|
|
|
[## More Roboust Klicky Probe](./oc_geek/) by oc_geek
|
|
|
|
Beefier column and revised holes for zip tie (was def too small); reduced height 1mm (was excess)
|
|
Chamfered bottom in all direction (also sides) on the probe carriage
|
|
Microswitch body exposed by a tiny bit
|
|
|
|
[## Fixed gantry Klicky dock mount for Legacy](./Baltojikale/) by Baltojikale
|
|
|
|
Modified gantry Klicky Probe to mount on a Voron Legacy, should work without adjustments.
|
|
|
|
[## Adjustable Klicky dock mount for Legacy](./Maverick/) by Maverick
|
|
|
|
Modified Klicky Probe to mount on a Voron Legacy. Docking components are designed to allow for adjustments on the Z and Y axis.
|
|
|
|
[## Modded Z endstop for v1.8](./Yeri/) by Yeri
|
|
|
|
Designed for V1.8
|
|
"I had originally used the z endstop in the stock position but due to the crashes with the probe attached I extended it in Y by 14 mm -- here's the new stl"
|