History

Florian Heilmann 6ead68ef79 Reorder Image List for mods page 2/2		2023-07-15 13:51:22 +02:00
..
CAD	Jeoje mods PR (#251 )	2021-05-07 20:16:10 -04:00
STL	Jeoje mods PR (#251 )	2021-05-07 20:16:10 -04:00
images	Jeoje mods PR (#251 )	2021-05-07 20:16:10 -04:00
.metadata.yml	Reorder Image List for mods page 2/2	2023-07-15 13:51:22 +02:00
README.md	Jeoje mods PR (#251 )	2021-05-07 20:16:10 -04:00

README.md

Voron v2.4 Sturdy Handles

I wanted handles for the v2.4 that were a bit more sturdy than I've been able to find and that didn't act as a clip for the panels. That's what I have the clips for :). This is a modified v2.2 handle that has 4 anchor points. It will not work on the bottom extrusions if you're using skirts, but should anywhere that has access to 2 adjacent sides of an extrusion. It has 6mm of clearance on the side that will go over the panel slightly.

Parts Required

Part	Quantity	Comment
M5 X 12 SHCS	2
M5 T-Nut	2

Printing

Print using standard Voron part settings and in the orientation used in the STL
Supports should not be needed, but the overhang is < 45 degrees. That area is hidden from view and tolerances don't really matter there. Regardless, it prints clean for me.

Installation

You will likely need to move the top panel out of the way for installation. I just removed clips from one side and the middle to lift it up a bit.