zach
/
VoronUsers
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
VoronUsers/printer_mods/README.md

24 KiB
Raw Blame History

Mods

Printer mods for Voron 3D printers Remember to update this README when uploading new mod!

Legacy printers

Mods for legacy printers can be found here. If one of your mods applies to a current generation Voron printer, contact the admins in Discord to have your mod moved to this folder.

Table structure

Update the following table with the information about your mod:

  • Your name
  • A link to your sub-folder
  • A short description of your mod
  • The printer compatibility. Use :heavy_check_mark: for ✔️,:x: for ❌ and :grey_question: for ❔

like so: | Creator | [Mod title](link) | Description | :x: | :x: | :x: | :x: |

Creator Mod title Description V0 V1.8 V2.4 VSW
42bios LED mount LED-mount for Lumentech LT3 profiles. ❌ ❔ ✔️ ❌
relay mount relay-mount for 2x 2 channel relay modules. ❌ ❔ ✔️ ❌
aeresov TL filament sensor bracket A bracket for TL filament sensor to mount near stock spool holder. ❌ ❔ ✔️ ❌
MeanWell UHP-xxx DIN mount A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount it across 2 DIN rails. ❌ ❔ ✔️
Raspberry Pi DIN mount A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or across. ❌ ❔ ✔️
SKR 1.3/1.4 DIN mount A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or across. ❌ ❔ ✔️
cable tie DIN mount A bracket for cable ties to route cables across DIN rails. ❌ ❔ ✔️
albert IKEA Dioder Led Mount A mount for the IKEA Dioder LED strip ❔ ❔ ✔️ ❌
al3ph LED Mount A mount for 10mm LED WS2812 strips ✔️ ❌ ❌ ❌
Analog Timer Mount A skirt mount for analog timer ✔️ ❌ ❌ ❌
Filament Runout Sensor A simple filament runout sensor ✔️ ✔️ ✔️ ✔️
PL05 Sensor Mount A mount PL05 inductive sensor ✔️ ❌ ❌ ❌
arkeet Dial test indicator mount A toolhead mount for a dial test indicator, where the tip is located at the nozzle. ❌ ✔️ ✔️ ❌
Magnetic hotend fan cover A replacement hotend fan cover, held with magnets instead of screws. ❌ ✔️ ✔️ ✔️
MGN12 X-axis Replaces the dual MGN9H rails with a single MGN12H. ❌ ❌ ✔️ ❌
V0 DC inlet Skirt inlet for external 24V DC power supply. ✔️ ❌ ❌ ❌
claytono Voron 2.4 Extrusion Jig A jig help align extrusions to get a properly square frame ❌ ❌ ✔️ ❌
V0 Zip Tie Skirts V0 skirts with small loops added along the top to allow zip tyiing cables to them ✔️ ❌ ❌ ❌
Badnoob Precision AB Drive Changes the gearing for the AB drives to improve both resolution and torque, with a strenthened frame. ❔ ❔ ✔️ ❌
Rail Alignment Tools and procedure to properly align the rails in 2.4 and Afterburner ❌ ❌ ✔️ ❌
BladeScraper-Designs Microswitch_Pod_With_Connector Microswitch pod with JST-XH 4-pin connector ❌ ❌ ✔️ ❌
BlueBear Deck Panel Backpack A mounting alternative if you don't want to drill your deck panel ✔️ ❌ ❌ ❌
Clippable Wago 221 Mounts Mounts for Wago 221 to screw or clip-in on 1515 extrusions ✔️ ❌ ❌
Ziptie Mount Clippable Ziptie hooks for 1515 extrusions ✔️ ❌ ❌
btp Galileo chain mount (befenybay) Modified chain mount position to cater for difference with Galileo Clockwork ❌ ❌ ❌ ✔️
buzzdalf v1.8/2.4 Afterburner connector cover for 42STH20-1004AS v1.8/2.4 Connector cover for 42STH20-1004AS ❌ ✔️ ✔️ ❔
Ender 3 Switchwire Taller Z Mod Taller Z Mod ❌ ❌ ❌ ✔️
chrisrgonzales 270° Front Panel Hinge Hinges that have 270° of swivel, parametric CAD included ❌ ❌ ✔️ ❌
Conqueror433 Voron Parts Logo Voron Parts Logo for your back panels, 3D Print or Laser Cut ❌ ❌ ✔️ ❌
consibonsi Y-Mod SW 9mm 9mm Y belt mod for SW ❌ ❌ ❌ ✔️
d3nny Filtered Power Plug with RND_165-00057 Filtered Power Plug for RND 165-00057 and CAT6-Plug ❌ ❌ ✔️ ❌
DaGrooch13 Tophat Exhaust Filter V0 Activated charcoal exhaust filter with HEPA that replaces the rear tophat panel ✔️ ❌ ❌ ❌
Dan88 V0 one-part Skirts One part Skirts for the V0 ✔️ ❌ ❌ ❌
DC67 Plug Panel Mod for Schaffner FN286-10-06 A modified plug panel for the Power Entry Connector Schaffner FN286-10-06 with two integreated Keystone sockets. ❌ ❔ ✔️ ❌
deepfriedheroin V2 Bed Wagos Wire management for the v2 bed ❌ ❌ ✔️ ❌
v0 Wago Bed Mounts Easy to install Wago mounts for the v0 ✔️ ❌ ❌ ❌
v0 Power Wagos Easy to install Wago mounts for v0 mains ✔️ ❌ ❌ ❌
DorjeDorf Duet 3 6HC Din Bracket V2.4 Duet 3 6HC Din Bracket ❌ ❌ ✔️ ❌
Duet 3 3HC Din Bracket V2.4 Duet 3 3HC Din Bracket ❌ ❌ ✔️ ❌
doubletrouble V0 Skirt Mod V0 Skirt Mod ✔️ ❌ ❌ ❌
DrGhetto Ghetto Panels Printed panels for the Voron Zero ✔️ ❌ ❌ ❌
eddie V1.8 12mm Z Mod Add V1.8 option for 12mm Z rods ❌ ✔️ ❌ ❌
edwardyeeks Decontaminator Purge Bucket & Nozzle Scrubber Removeable purge bucket with nozzle scrubber ❌ ✔️ ✔️ ❌
V2.4 Z Drive Motor Tensioner Mod Braced motor tensioner for z drive ❌ ❌ ✔️ ❌
Ellis 15x15 Drag Chain Ends 15x15 drag chain end pieces ❔ ❔ ✔️ ❌
Badge Retractor Mount Extrusion mount for badge retractor to keep bowden tube out of the way. ❔ ❔ ✔️ ❌
Short Z Joints Shorter Z joints for the v2.4 ❌ ❌ ✔️ ❌
FreeformFez V1.8 Filtered Power Inlet V1.6 Filtered Inlet and Rocker Switch for V1.8 ❌ ✔️ ❌ ❌
GiulianoM Fly F407ZG Mount Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG ❌ ❌ ✔️ ❌
Gizzle Ender 3 and Ender 3 Pro Switchwire Mod Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics and most other parts of the Voron Switchwire. ❌ ❌ ❌ ✔️
GSL12 Pocketwatch Nema 17 Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe for V0 fork with 2020 extrusions, Nema17 and MGN9 or other printers. ❔ ❔ ❔ ❌
hhammarstrand Afterburner connector cover for 42STH20-1004AS Connector cover for 42STH20-1004AS ❌ ❌ ❌ ✔️
hartk1213 Voron0_deck_panel_with_logo_and_VORON0 Used @Kruppes blank deck panel to add the logo as well as the name VORON0 ✔️ ❌ ❌ ❌
Voron0_display_dualcolor Added a dual color file for the Voron Display Front housing ✔️ ❌ ❌ ❌
Voron0_C14Inlet Added a new Power inlet that uses a Fused C14 plug and switch that covers the mains contacts ✔️ ❌ ❌ ❌
Voron0_Hinged_Top_Hat Created a new hinged top hat design for the V0 so it can fold away when you dont want a top hat on ✔️ ❌ ❌ ❌
Voron0_ExtendedLegs New extended legs to raise the printer up a tiny bit more ✔️ ❌ ❌ ❌
Voron0_ExtrusionSkirt Created a new skirt design that uses 50mm extrusions as legs and it has a c14 power inlet hole on the bottom ✔️ ❌ ❌ ❌
Voron2.4_Pins_Mod This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins ❌ ❌ ✔️ ❌
hernsl Bottom Panel Mag Clip v2.4 magnetic clips to retain bottom panel ❌ ❌ ✔️ ❌
hijax_pl_ Corner panel clip V2 panel corner frames using 3-way L brackets in the corners ❌ ❌ ✔️ ❌
Din Rail mount Adapter to attach DIN Rail to 2020 extrusion. ❌ ❌ ✔️ ❌
Controler Board adapters DIN (rotated) and legacy adapters for boards like SKR mini E3. ❔ ❌ ✔️ ❌
Iakabos c920_Mount Slim mount for logitech c920 webcam ❌ ✔️ ✔️ ❌
V0 beltchains Modified beltchain parts for V0 Z cables ✔️ ❌ ❌ ❌
jasonc V2.4 Z-Idler Shoulder Bolt Mod Modification to the idler carriers to accept a 25mm shoulder bolt. Ideal for Gates idlers. ❌ ❌ ✔️ ❌
JNP Back Door Door for easy hardware access ✔️ ❌ ❌ ❌
Deck Panel Covers the hotbed cables ✔️ ❌ ❌ ❌
Drawer Drawer in four different versions ✔️ ❌ ❌ ❌
Front Door Door in a frame ✔️ ❌ ❌ ❌
Hepa Filter Filter case with fan´s ✔️ ❌ ❌ ❌
Mid Panel Panel for SKR1.4/1.4 or SKR E3 mini mount ✔️ ❌ ❌ ❌
Neopixel Case mounting for Neopixel strip with 8 LED´s ✔️ ❌ ❌ ❌
Side Panels Panels with intergrated hinge ✔️ ❌ ❌ ❌
KenadyDwag44 Switchwire Lightbar A LED lightbar for switchwire ❌ ❌ ❌ ✔️
KiloQubit V0 Reverse Bowden Mount V0 reverse bowden mount ✔️ ❌ ❌ ❌
V2.4 Z Chain Mounts for 3 Hole Chains Z chain mounts for 3 hole generic chain ❌ ❌ ✔️ ❌
kirby V0 Sherpa Mini Direct Drive Mod A direct drive mod for the V0 using the Annex Sherpa Mini extruder ✔️ ❌ ❌ ❌
Koios 6mm Tempered Glass Mod Lock levers and rests for 6mm Tempered glass panels ❌ ❌ ✔️ ❌
C920 Low Profile Mount Low profile mount for a C920 Webcam ❌ ❌ ✔️ ❌
LED Bar Mounts Low profile mount for led bar lights ❌ ❌ ✔️ ❌
V0 C920 Tophat Mount Mounting bracket for a Logitech C920 on the tophat ✔️ ❌ ❌ ❌
Kruppes Belt Tension Meter Print in place tension meter to easily tighten multiple belts to the same tension ✔️ ✔️ ✔️ ✔️
Encosed Bottom Modified printed parts and panel to fully enclose V0. ✔️ ❌ ❌ ❌
V0 Printed Deck with inserts Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo. ✔️ ❌ ❌ ❌
leandromarceddu PowerSkirt Modified skirtpiece for a digital power monitor ❌ ❔ ✔️ ❔
littleferris V0 c14 Skirt Inlet V0 C14 Skirt inlet ✔️ ❌ ❌ ❌
madros V0 OLED-skirt V0 skirt with 0.96" OLED ✔️ ❌ ❌ ❌
MarcPot UHP PSU Bracket Clip DIN rail mount for the Mean Well UHP series PSU. ❔ ❔ ✔️ ❌
Hour Counter Skirt + Keystone Skirt Skirt mod for a mechanical hour counter and keystone inserts ❌ ❌ ✔️ ❌
Maverick_ V0 C14 Inlet A modification to the rear foot of the V0 to allow for the addition of a C14 Inlet. ✔️ ❌ ❌ ❌
V0 Deck Logo A lower deck panel addition to the V0, designed to accomodate a Neopixel Ring. ✔️ ❌ ❌ ❌
V0 LED Front Bed Mount A modification designed to accomodate a Neopixel Jewel (7) in the face of the front bed mount. ✔️ ❌ ❌ ❌
V0 LED Hinge A modification designed to accomodate a Neopixel Jewel (7) in the top right hinge of the door. ✔️ ❌ ❌ ❌
V0 TopHat Mini 12864 Modified TopHat to mount a Mini 12864. ✔️ ❌ ❌ ❌
mjoaris 10x11 Cable Chain Endcaps Printable Endcaps for 10x11 Cable Chains ❌ ✔️ ✔️ ❌
Mini12864 LCD Mount Swiveling case for the Fysetc Mini12864 LCD ❌ ❔ ✔️ ❌
Mosher Door hinges with M3 screws shafts Simple mod of print in place door hinges, which uses m3 screws as shafts. ❌ ❌ ✔️ ❌
MrBean66 SKR Pro DIN Mount Simple mod to mount the SKR Pro board from BTT to a DIN rails. ❌ ✔️ ✔️ ❌
Nashuar V0 Dragon Toolhead M2.5x8 This toolhead uses the stock M2.5 screw that came with the dragon hotend ✔️ ❌ ❌ ❌
natewalck V1.8 Jigs Jigs for assembling V1.8 ❌ ✔️ ❌ ❌
Nomsplease 60mm Shaft Jig Simple jig for cutting and grinding 60mm Z shafts ❌ ❌ ✔️ ❌
Duet Wifi Mount Duet wifi mount in pocketwatch location ✔️ ❌ ❌ ❌
LED Mounts Basic LED mounts for 10 and 12mm strips ✔️ ❌ ❌ ❌
Remixed Panel Mounts Remixed rear bottom panel mounts with stop ✔️ ❌ ❌ ❌
Pi Cam/ZeroW Mount Mount for pi camera and ZeroW ✔️ ❌ ❌ ❌
Pocket Watch Rear Reolcation Bracket Pocket watch rear reolcation bracket ✔️ ❌ ❌ ❌
ommy roller brackets Brackets to help rolling V2 on its side. ❌ ❌ ✔️ ❌
piet206 V1.8 Z Rails Mod Add MGN12H linear rails for Z axis motion ❌ ✔️ ❌ ❌
randell Door Hinges Door hinges that use an M3 bolt for a pin and bolts thru the panel ❌ ❌ ✔️ ❌
Microswitch Pod for PCB Modified endstop pod for use of endstop switches mounted on a PCB ❌ ❌ ✔️ ❌
raymondh Large Spool Holders Larger spool holders for KVP spools ❌ ✔️ ✔️ ❌
Rhastlyn Wansview 1080p Camera Mount A camera mount that replaces the OEM part to allow the camera to be mounted to a 2020 extrusion ❌ ❔ ✔️ ❌
60mm Fan Cover A easy to install cover for spec 60mm fans originally designed for a 2.4 build ❌ ❔ ✔️ ❌
roboticator24 Touchscreen for OctoDash Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual 12864 panel to allow you to run the amazing OctoDash touch UI ❌ ❌ ✔️ ❌
rngSplat Printable Switchwire Deck Plate Print a deck plate for Switchwire with debossed Voron logo ❌ ❌ ❌ ✔️
Slidr PanzerChain 2.4 Energychain for V2.4 ❌ ❌ ✔️ ❌
sloscotty Switchwire Wall Plate SW plate for enclosure ❌ ❌ ❌ ✔️
Spaghetti-Bolognese Simplified Z Drive Motor Mount Z drive motor mount bracket mod to improve pulley to belt alignment ❌ ❌ ✔️ ❌
LCD Case Mod Improvements to the V2.4 mini12864 LCD case inc E-stop button cover ❌ ❌ ✔️ ❌
StvPtrsn Skirts for a 320mm Build Skirts for a 320mm build ❌ ❌ ✔️ ❌
Keystone Jack for Filtered Mains Panel Add a keystone jack to your filtered mains plug panel ❌ ❌ ✔️ ❌
Side Fan Support, No Tape Mount the 60mm side fans and inserts without tape ❌ ❌ ✔️ ❌
tameike Din Rail SKR 90 deg SKR V1.3 bracket turned 90 degrees ❌ ❔ ✔️ ❌
Din Rail 2020 Holder Attaching DIN Rails to 2020 ❌ ❔ ✔️ ❌
TacoRaven Mounting Frame TR V0 mount ✔️ ❌ ❌ ❌
Jetpack V0 base Attach Jetpack to V0 frame ✔️ ❌ ❌ ❌
tayto-chip V2.4 Skirt Switch Mod Add a ON/OFF Switch to side or front skirts ❌ ❌ ✔️ ❌
teookie AB_dial_indicator_mount Mount for attaching standard dial indicators to AB ❌ ✔️ ✔️ ✔️
togi Exhaust housing side fitting Moves the exhaust housing bowden fitting 90 degrees to allow the printer to stand closer to a wall ❌ ❌ ✔️ ❌
warriorofwire Slenderfan for Afterburner Lighter, quieter, smaller Afterburner ❌ ❌ ✔️ ❌
Weaslus Electronics Bay and Enclosure Seperator Better enclose chamber and keep heat from electronics ✔️ ❌ ❌ ❌
xbst_ PCB LED Holder Very simple mount for some (?) PCB LED Bars ❌ ✔️ ✔️ ❌
DIN Mount Omron Relay A simple DIN rail mount for the BOM Relay ❌ ✔️ ✔️ ❌
DIN Mount Pi 4x Relay Board A simple DIN rail mount for the 4 channel relay board for Raspberry Pi ❌ ✔️ ✔️ ❌
DIN Mount Max31865 A simple DIN rail mount for the Adafruit (or SAME SIZE clone) MAX31865 PT100 Board. ❌ ✔️ ✔️ ❌
Car Hood Style Bed Hinge A way of reaching electronics from the top by having a "car hood" style hinge for the heatbed, and rotated electronics mounts. ❌ ❌ ✔️ ❌
Flat V2.4 Skirts Flat V2.4 Skirts so a panel without cutouts can be used ❌ ❌ ✔️ ❌
V2.4 Fanless Middle Skirt A Fanless alternative middle side skirt ❌ ❌ ✔️ ❌
Duct Mount 100mm/4" ducting mount for ventilation. Also supports umbilical cord and has 3 orientations for bowden adapter. ❌ ❌ ✔️ ❌
V2.4 Skirt Buttons Skirt mod for custom Gcode macro buttons ❌ ❌ ✔️ ❌
HOYMK SSR Mount Mount for Chinese HOYMK SSR ✔️ ❌ ❌ ❌
ADXL345 V0 Mount V0 Mount for a ADXL345 module ✔️ ❌ ❌ ❌
Easy Access Rear Panels New rear panels designed to expose the extruder for easy filament swapping ✔️ ❌ ❌ ❌
Hat LED Mount Top Hat LED module mount ✔️ ❌ ❌ ❌
ZipClip V0 Very simple ziptie mount for v0 1515 extrusions ✔️ ❌ ❌ ❌
Screwed Front Door Hinge Mod to screw the front door panel (instead of VHB) ✔️ ❌ ❌ ❌
V0 Buttons & OLED Mount Mod to mount custom Gcode macro buttons & Waveshare 1.3" OLED display ✔️ ❌ ❌ ❌
Mobius 4 (M4) V0 Mod Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder mounts ✔️ ❌ ❌ ❌
V0 Electronics Cover A printed cover for v0 electronics. Requires larger printer to print. ✔️ ❌ ❌ ❌
V0 PiCam Mount A Raspberry Pi Camera Mount For V0 ✔️ ❌ ❌ ❌
DuetZero Pi Zero mount over a Duet2 for space saving ✔️ ✔️ ✔️ ❌
Zen3D V0 Handle Voron0 Handle for 3mm panels ✔️ ❌ ❌ ❌
V0 MidPanel HexPattern Voron0 MidPanel with Hex pattern and Wire cover ✔️ ❌ ❌ ❌
V0 1515 T-nut M3 square and hex nuts for Voron0 1515 frame ✔️ ❌ ❌ ❌