62 lines
1.8 KiB
Markdown
62 lines
1.8 KiB
Markdown
Mini Afterburner Pinda Probe Mount
|
|
==============================
|
|
|
|
A modified dragon toolhead cowling to mount a pinda (or superpinda, or vinda) probe to your V0.1! (Mosquito will come someday if I get this working).
|
|
|
|
BOM
|
|
---
|
|
|
|
- 1x Some kind of Pinda probe. Looking for something that's about 8mm diameter. Ideally you'd get a superpinda or vinda probe, the temperature drift with a standard style pinda v2 probe is wild and makes it hard to use if you don't preheat your chamber (in addition to your bed and hotend!).
|
|
- 1x M2x8 self tapping screw. Head is countersunk for a Flat Head style screw, but a BHCS should work too, there's clearance for it to stick out.
|
|
- Everything else you'd need for a standard Dragon MiniAB toolhead.
|
|
|
|
|
|
Instructions
|
|
------------
|
|
|
|
- Print the new toolhead
|
|
- Install it on your V0.1, I wired up the ground and signal pin to my z-endstop port and the 5v to the bltouch port on my skr mini e3 v2.
|
|
- Install the pinda probe and tighten it down and follow the probe calibrate guide here: https://www.klipper3d.org/Probe_Calibrate.html
|
|
- My offsets wound up being x_offset: -30.7 and y_offset: -13, but you should double check on your own machine just to be safe!
|
|
- I've been using just the superPinda as my endstop and bedmesh using the following settings in my printer.cfg:
|
|
|
|
```
|
|
[probe]
|
|
pin: PC14
|
|
#z_offset: 2.345
|
|
x_offset: -30.7
|
|
y_offset: -13
|
|
samples: 3
|
|
speed: 100
|
|
samples_tolerance: 0.010
|
|
samples_tolerance_retries: 4
|
|
|
|
[bed_mesh]
|
|
speed: 250
|
|
horizontal_move_z: 5
|
|
mesh_min: 15,10
|
|
mesh_max: 89, 105
|
|
#mesh_pps: 2,3
|
|
move_check_distance: 3.0
|
|
split_delta_z: .01
|
|
probe_count: 5,5
|
|
algorithm: bicubic
|
|
relative_reference_index: 12
|
|
|
|
# ~~~probe homing~~~
|
|
[safe_z_home]
|
|
home_xy_position: 60,60
|
|
speed: 100
|
|
z_hop: 15
|
|
z_hop_speed: 5
|
|
```
|
|
|
|
|
|
Images
|
|
------
|
|
|
|
|
|
|
|
|
|
|