32 lines
1.6 KiB
Markdown
32 lines
1.6 KiB
Markdown
# FANnypack Zero
|
|
|
|
This is a simple and yet overkill electronics cooling solution originally intended for the Voron Zero however could also be installed on any printer with a solid panel covering the electronics area.
|
|
|
|
|
|
|
|
## Assembly
|
|
|
|
Linked products are an example, other brands work just fine! That said using the affiliate link helps support future developments and costs you nothing :)
|
|
|
|
BOM:
|
|
- 1x [8015 axial fan affiliate link](https://s.click.aliexpress.com/e/_AURPhP) / [8015 axial fan normal link](https://www.aliexpress.com/item/32600915237.html)
|
|
- 4x M3x20mm screw
|
|
- 4x M3 inserts
|
|
- 1x modified electronics back panel
|
|
- 1x printed fan cover
|
|
|
|
use the dxf and a laser cutter at your local makerspace to produce the holes in the panel or print it out and use it as a template to do it manually. If enough people express interest Funnsor said they would stock some panels so drop me a message if you would want to buy in a whole new panel instead of modifying your old one.
|
|
|
|
Install m3 inserts in the printed fan cover
|
|
|
|
Poke wire through the hole and then attach fan and cover to the outside of the panel using the m3 screws.
|
|
|
|
Depending on your control board you may need to use a [klipper expander affiliate link](https://s.click.aliexpress.com/e/_AfOnF3) / [klipper expander normal link](https://www.aliexpress.com/item/1005002384419036.html) board to gain an additional controllable fan output.
|
|
|
|
For info on wiring and detailed assembly pictures etc. please take a look at the guide I did [here](https://3dpandme.com/?p=406) as part of a general upgrade to my V0.1
|
|
|
|
## Feedback
|
|
|
|
Feel free to contact me - I'm Slzer#2881 on the discord.
|
|
|