968ccc0cec
* Create README.md * Initial file add * Update README.md * Update README.md * Update README.md * Updated files * Fixed unneeded text * Rename and update wording to replace 'retainer' with 'guide' * Update wording * Initial commit * Updated parent readme * Update screen mount readme * Initial commit for "Sturdy Handles" * Update sturdy handles readme * Initial commit for the MLX/MF3.0 Connector Mount * Update readme for bed connector * Update orientation * Update MLX Mount Readme * - Updated 4.3_Inch_Touchscreen_Mount README -- Include "images/CAD_offset_profile.png" -- Use relative links to github -- Add qty of parts to print * - Fixed - Z Chain Thermistor Mount hole no longer prints in air * - Fixed URL for Roboticator's skirts |
||
|---|---|---|
| .. | ||
| CAD | ||
| STL | ||
| images | ||
| README.md | ||
README.md
Voron v2.4 4.3" Touchscreen Mount
Inspired by Roboticator's excellent 4" touchscreen mount, I wanted to use a capacitive touchscreen and a DSI connection instead.
This mod mounts a Waveshare 4.3inch Capacitive Touch Display purchased from Amazon. The screen is oriented at a 60 degree angle keeping the height the same as a standard skirt.
Combine with Roboticator's modified skirts for a cleaner look.
Parts Required
| Part | Quantity | Comment |
|---|---|---|
| M3 X 8 SHCS/BHCS Screw | 3 | |
| M3 T-Nut | 3 | |
| M2 x 10 Self Tapping Screws | 2 | Optional |
| M2.5 Screws | 4 | Included with screen |
| DSI Cable | 1 | Long enough to reach your Pi |
Printing
- Print 1 * faceplate and 1 * screen_mount
- Print using standard Voron part settings and in the orientation used in the STL
- No supports required, but there is one bridge in the mount, the bottom layer of which is not in view once installed
- Voron logo is inset .2mm intentionally to force the solid infill around the hex. You should not need to support this.
- Use concentric infill for the bottom layer for a different effect
Installation
- Attach the screen to the mount using 4 x M2.5 screws that were included with the screen
- Ensure the screen slid as high on the mount as possible
- Slide the faceplate onto the screen from the bottom, ensuring the sides remain latched behind the PCB
- Fasten the mount to the bottom extrusion in place of the spec LCD/mount
- You may need to leave the screen screws slightly loose to ensure the M3 screws clear it. Ensure to tighten afterwards.
- Slide the faceplate up until it is flush to the extrusion
- Optional: Secure the faceplate with (2) 2 x 10 self tapping screws through the tabs on each side
- Connect your DSI cable