32 lines
742 B
Markdown
32 lines
742 B
Markdown
Magnetic hotend fan cover for Afterburner
|
|
=========================================
|
|
|
|
This replaces the screw-mounted hotend fan cover with one that is held
|
|
by magnets, for a clean front face and easier access to the toolhead. Works
|
|
with an unmodified toolhead.
|
|
|
|
Inspired by ModCables101's magnet mod.
|
|
|
|
Required hardware
|
|
-----------------
|
|
|
|
- 6x3mm round magnet (2x)
|
|
- M3x8 SHCS — steel, not stainless (2x)
|
|
|
|
Instructions
|
|
------------
|
|
|
|
Press the magnets into the new cover. Screw the M3x8 screws into the toolhead
|
|
until they bottom out; the heads should protrude 4mm from the surface.
|
|
|
|
|
|
|
|
Images
|
|
------
|
|
|
|
|
|
|
|
|
|
|
|
|