38d475bbd8
* 2.4r2 version Modded the original design for the new r2 feet and cutouts of the baseplate. * 2.4r2 version Modded the original design for the new r2 feet and cutouts of the baseplate. Only the baseplate has changed. * Moved the whole mod to the "abandoned_mods" folder. * Update README.md * Update [a]_2.4_base_plate_b_mod_x2.stl * added the change log section * Fixed Link * Fixed Link |
||
|---|---|---|
| .. | ||
| 250 | ||
| 300 | ||
| 350 | ||
| images | ||
| readme.md | ||
readme.md
A Team Dropbear Production
Tridentified V2.4 Power Inlet - by @Amarpal89
Trident style side plug skirts for V2.4 to suit Edwardyeeks z-drive tensioner mod
These skirts are only compatible with Edwardyeeks V2.4 z-drive Tensioner Mod Found Here
250:
RightSkirt_250.stl + PlugSkirt_250_*.stl Replace the plug panel and both stock rear skirts.
300 & 350:
PlugSkirt_3x0.stl + FillSkirt.stl + [right side skirt from Eddie's mod]
*_Filtered.stl is for filtered inlet with separate switch.
*_adamstech.stl is for single piece combination switch and inlet as per trident plug panel.
*_single.stl is for single piece combination switch and inlet as per original V2.4 plug panel.
Use the accent logo insert from trident stl's if you want a coloured logo on the rear fillskirt of 300/350 builds.
Want the inlet on the right instead of left? Then mirror the plug skirt.