365 lines
8.0 KiB
Markdown
365 lines
8.0 KiB
Markdown
# Mods
|
|
|
|
A neatly structured list of all the content in each folder
|
|
Remember to update this README when uploading new mods!
|
|
|
|
## List structure
|
|
|
|
The list should be structured in the following way:
|
|
|
|
## "Creator of mods"
|
|
|
|
"Mods name"
|
|
|
|
- "Small desciption of the mod"
|
|
|
|
"Mod 2's name"
|
|
|
|
- "Small desciption of the mod"
|
|
|
|
---
|
|
|
|
## 3D_Black
|
|
|
|
[Fan Covers](../mods/3D_Black)
|
|
|
|
- Different fan covers for 40mm fans.
|
|
|
|
## Andreq
|
|
|
|
[Mobius Shaft Jig](../mods/andreq/voron2)
|
|
|
|
- Tool used for grinding flats on a shaft at specific places.
|
|
|
|
## Armstr0ng
|
|
|
|
[Led extrusions mount](../mods/Armstr0ng)
|
|
|
|
- A mount for aluminium LED extrusions with hidden fasteners
|
|
|
|
## ArmyAg08
|
|
|
|
[Logitech C270 Mounts](../mods/ArmyAg08/Logitech_C270_Mounts)
|
|
|
|
- Different C270 camera mounts, attached to the extrusions.
|
|
|
|
[Corner Panel Clip](../mods/ArmyAg08/Panels)
|
|
|
|
- Corner panel clip that fit 3mm or 1/8" panels with foam tape.
|
|
|
|
## Chron
|
|
[SKR 1.3 TMC2208 UART Config](../mods/Chron)
|
|
|
|
- Configuration for SKR 1.3 TMC2208 UART
|
|
|
|
## Danowar
|
|
[Dual Mobius Mount](../mods/Danowar/Dual_Mobuis_Mount)
|
|
|
|
- Mounts two Mobius Extruders to the back of the printer.
|
|
|
|
[F6 Board Mount](../mods/Danowar/F6_Board_Mount)
|
|
|
|
- Mounts for FYSETCS F6 controller boards.
|
|
|
|
[FYSETC F6 1.3 Klipper Config](../mods/Danowar/FYSETC_F6_V1.3_Klipper_Config)
|
|
|
|
- Klipper config for a FYSETC F6 350 build.
|
|
|
|
[Humidity Sensor Bracket](../mods/Danowar/Humidity_Sensor_Bracket)
|
|
|
|
- Mount for Humidity/Temperature sensor.
|
|
|
|
[Load Cell Spool Holder](../mods/Danowar/Load_Cell_Spool_Holder)
|
|
|
|
- Spool holder with built in weight scale.
|
|
|
|
[TL 2-to-1 Mosquito Toolhead Adapter](../mods/Danowar/TL_2-to-1_Mosquito_Toolhead_Adapter)
|
|
|
|
- Mounts the Triangle Labs 2-to-1 adapter directly to the mosquito toolhead.
|
|
|
|
[Tablet mount](../mods/Danowar/Tablet_Mount)
|
|
|
|
- Detachable mount for tablet using magnets.
|
|
|
|
## Dunar
|
|
|
|
[Panel Rest](../mods/Dunar/Panel_Rest)
|
|
|
|
- External panel holder
|
|
|
|
## FHeilmann
|
|
|
|
[Voron 2.0 5mm Parts](../mods/FHeilmann/VORON2_5mm_Parts)
|
|
|
|
- Parts modified for extrusions with 5mm gap.
|
|
|
|
[Voron 2.1 5mm Parts](../mods/FHeilmann/VORON2.1_5mm_parts)
|
|
|
|
- Parts modified for extrusions with 5mm gap.
|
|
|
|
## Fulg
|
|
|
|
[PanelDue5 LCD Mount](../mods/Fulg/VORON2/PanelDue5)
|
|
|
|
- Mount for the PanelDue5 LCD display.
|
|
|
|
## GSL12
|
|
|
|
[WAGO 221 Mounts](../mods/GSL12/wago_221_mount)
|
|
|
|
## Glowtape
|
|
|
|
[MKS GenL 1.0 Mounting Bracket](../mods/Glowtape)
|
|
|
|
## GustavTheMighty
|
|
|
|
[4.3 PanelDue Case](../mods/GustavtheMighty/4.3-Paneldue_Case)
|
|
|
|
- Case/mount for the 4.3 PanelDue LCD Display.
|
|
|
|
## Hackdoggo
|
|
|
|
[BMGobius](../mods/hackdoggo/v2/bmgobius)
|
|
|
|
- Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears.
|
|
|
|
## Jass_on
|
|
|
|
[Tempered glass clips/handle](../mods/Jass_on/Voron_2.1.1_Tempered_Glass)
|
|
|
|
- Panel clips and handles for using tempered glass side panels.
|
|
|
|
[Rear panel clips](../mods/Jass_on)
|
|
|
|
[SKR 1.3 Cooling bracket](../mods/Jass_on)
|
|
|
|
- SKR 1.3 mount with built in 40mm fan mount.
|
|
|
|
## JeJeff
|
|
|
|
[2020 Extrusion slot cover](../mods/JeJeff/VORON2.1/2020_5mm_Slot_Cover)
|
|
|
|
- Slot covers for extrusions with 5mm slot width.
|
|
|
|
[Cable Tie Mount](../mods/JeJeff/VORON2.1/Cable_Tie_Mount)
|
|
|
|
- Cable tie mounts for 4mm cable ties.
|
|
|
|
[Main Plug Panel](../mods/JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount)
|
|
|
|
- Main Plug Panel modified to hold a RJ45 ethernet socket.
|
|
|
|
## Jink
|
|
|
|
[Coroplast mount](../mods/Jink/VORON_2.1/Coroplast_Mount)
|
|
|
|
- Mount / Bracket supporting the coroplast sheets.
|
|
|
|
[Filament runout sensor mount](../mods/Jink/VORON_2.1/Filament_Runout_Sensor_Mount)
|
|
|
|
[Left handed RAMPS mount](../mods/Jink/VORON_2.1/Left_Handed_Ramps_Mount)
|
|
|
|
- Mirrored RAMPS bracket.
|
|
|
|
[Spool holder with scale](../mods/Jink/VORON_2.1/Spool_Holder_With_Scale)
|
|
|
|
[WAGO Mount](../mods/Jink/VORON_2.1/WAGO_Mount)
|
|
|
|
- Mount for 3x WAGO connectors.
|
|
|
|
## JustinVoelker
|
|
|
|
[Mains Plug Panel with RJ45](../mods/JustinVoelker/VORON2)
|
|
|
|
- Mains plug panel with ethernet cutout.
|
|
|
|
## K1JWG
|
|
|
|
[PanelDue 7i Custom Logo](../mods/K1JWG/PanelDue7iLogo)
|
|
|
|
- Custom Voron 2 logo for use as a PanelDue 7i startup splash screen.
|
|
|
|
## Koios
|
|
|
|
[Front Panel Locks](../mods/Koios/6mm_Glass)
|
|
|
|
- Front panel locks for 6mm tempered glass panels.
|
|
|
|
[Logitech C920 Mount](../mods/Koios)
|
|
|
|
- Mount for C920 secured to the top front extrusion.
|
|
|
|
[LED Mounts](../mods/Koios)
|
|
|
|
- Different mounts for LED light bars.
|
|
|
|
## OrkusMG
|
|
|
|
[Waveshare 5 Inch LCD Cover](../mods/OrkusMG/Waveshare5inchHDMILCDscreenCover)
|
|
|
|
- Display Cover for the Waveshare 5 inch HDMI LCD screen.
|
|
|
|
|
|
## Railgunner
|
|
|
|
[Dual Direct Drive X Carriage](../mods/Railgunner/10mmBMGx2)
|
|
|
|
- Dual direct drive using 2x Bondtech BMG.
|
|
|
|
## Seamen
|
|
|
|
[RAMPS Extender Holder](../mods/Railgunner/10mmBMGx2)
|
|
|
|
- Mount for RAMPS board with the stepper extender.
|
|
|
|
## Sparreau
|
|
|
|
[5V Power Supply Mount](../mods/Sparreau)
|
|
|
|
[FSR Circuit Mount](../mods/Sparreau)
|
|
|
|
- Bracket for mounting the FSR PCB.
|
|
|
|
[Z Rail Stop](../mods/Sparreau)
|
|
|
|
[Bed Extrusion Spacer](../mods/Sparreau)
|
|
|
|
[Dial Indicator Fan Mount](../mods/Sparreau)
|
|
|
|
- Mount for attaching a dial indicator to the X Carriage.
|
|
|
|
[Mains Plug Panel Parametric](../mods/Sparreau)
|
|
|
|
- Scalable mains plug panel with small modifications.
|
|
|
|
[Z Idler Frame Extra Tab](../mods/Sparreau)
|
|
|
|
- An extra tab added to the Z idler to prevent sagging / rotation.
|
|
|
|
## Stephan
|
|
|
|
[M12 Probeholder](../mods/Stephan/M12_probeholder)
|
|
|
|
- Drop in replacement of the stock probe to a M12.
|
|
|
|
[BlTouch Mount](../mods/Stephan/bltouch_mount)
|
|
|
|
- Drop in replacement of the stock probe to a BLTouch.
|
|
|
|
## daveidmx
|
|
|
|
[30mm Fan Adapter](../mods/daveidmx/VORON2)
|
|
|
|
- 30mm fan adapter for the X carriage.
|
|
|
|
## etherwalker
|
|
|
|
[Pi Zero Camera Mount](../mods/etherwalker/Pi_Zero_Camera_Mount)
|
|
|
|
## exquyre
|
|
|
|
[Anet 12864 Display](../mods/exquyre/Anet_12864_display)
|
|
|
|
- Case for Anet 12864 LCD display.
|
|
|
|
[LED Bar Mount](../mods/exquyre/LED_bar_mount)
|
|
|
|
- Mount for 12V LED bars to the top extrusions.
|
|
|
|
[Cable Cover Insert](../mods/exquyre/cable_cover)
|
|
|
|
- Room for 3-4 20AWG wires.
|
|
|
|
[Einsy + RAMPS Combo](../mods/exquyre/einsy%2Bramps)
|
|
|
|
- Mounting bracket for 1 Einsy and 1 RAMPS.
|
|
|
|
## hiemmer
|
|
|
|
[Tool Holders](../mods/hiemmer/Tool_Holders)
|
|
|
|
- Tool holder for calipers, screwdriver etc.
|
|
|
|
## nemgrea
|
|
|
|
[Magnetic Split Front Door](../mods/nemgrea/magnetic_split_front_door)
|
|
|
|
- Hinges, handles and magnet mounts for creating a split front door panel.
|
|
|
|
## pnokel
|
|
|
|
[Cable Zipper](../mods/pnokel)
|
|
|
|
- Small mount to secure wires with zip ties.
|
|
|
|
[Coroplast holders](../mods/pnokel)
|
|
|
|
- Different coroplast holders for added support.
|
|
|
|
[Toothed Idler](../mods/pnokel)
|
|
|
|
- 14.5mm toothed idler.
|
|
|
|
## steve450
|
|
|
|
[Corner Brackets](../mods/steve450/Voron2.1)
|
|
|
|
- Corner brackets preventing rotation of the extrusions, and stiffening the joints.
|
|
Also covers the Z-belt hole for improved aesthetics.
|
|
|
|
## synfinatic
|
|
|
|
[Duet Fan Mount](../mods/synfinatic/Duet-Fan-Mount)
|
|
|
|
- Duet/Duex fan mount with air vents directly above the steppers to increase airflow.
|
|
|
|
[E-Stop Switch](../mods/synfinatic/E-Stop-Switch)
|
|
|
|
- Mount for emergency button attached to the top of the printer.
|
|
|
|
[Filament DryBox](../mods/synfinatic/Filament-DryBox)
|
|
|
|
- Mount for filament drybox attached to the side of the printer.
|
|
|
|
[LED Mount](../mods/synfinatic/LED-Mount)
|
|
|
|
- Mount for LED lightbars.
|
|
|
|
[PS Extra Bracket](../mods/synfinatic/PS-Extra-Bracket)
|
|
|
|
- Extra bracket to keep the power supply in place.
|
|
|
|
[RJ45 Mount](../mods/synfinatic/RJ45-Mount)
|
|
|
|
- Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient.
|
|
|
|
## warriorofwire
|
|
|
|
[Openbuilds Drag Chain](../mods/warriorofwire/openbuilds_drag_chain)
|
|
|
|
- Collection of models for using an off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck.
|
|
|
|
[Direct Drive BMG-m mount](../mods/warriorofwire/bmg_direct_drive)
|
|
|
|
- Open toolhead mounting plans for Bondtech BMG-m and Mosquito direct drive combo.
|
|
|
|
## wile.e.coyote
|
|
|
|
[Coroplast Support](../mods/wile.e.coyote)
|
|
|
|
- Support for the coroplast to prevent sagging.
|
|
|
|
[Dual Buck Bracket](../mods/wile.e.coyote)
|
|
|
|
- Mounting bracket for 2 buck converters.
|
|
|
|
[Nozzle Scrubber Mount](../mods/wile.e.coyote)
|
|
|
|
- Mount for brass brush. Used for cleaning nozzle before printing.
|
|
|
|
[Wago Mounts](../mods/wile.e.coyote)
|
|
|
|
- Different mounts for Wago connectors.
|
|
|
|
---
|