2.1 KiB
2020 Aplic Cam Mount
2020 Aplic Cam Mount is a 3D printed part that is used to mount a cheapo aplic hd camera to the 2020 frame at bed level. The mount is designed to be held in place with a M3 screw and a M3 nut. Additionaly, you need 4x M3 heat inserts, 4x M3 spacers and 4x M3x6 screws for mounting the camera on the mount (pun intended).
Files
aplic_cam_mount_voron_2_4_300x300.stl- The mount STL, angled for the Voron 2.4 300x300mm geometry.aplic_cam_mount.scad- The OpenSCAD file for the mount (you can play modify the parameters for your own printer's geometry).
Parts
The mount is designed to be used with the following parts:
- 1x 3d printed 2020 Aplic Cam Mount
- 1x Aplic Webcam - 1920x1080P stripped from its plastic case
- 1x M3x10 screw
- 2x M3 nut
- 4x M3 heat insert
- 4x M3 spacer
- 4x M3x6 screws
Printing
The mount is printed in the orientation that it is in the STL file. The mount should be printed with the recommended Voron settings (40% infill and 4 perimeters) in ABS/ASA. That said, I've printed mine in PETG and it still holds. No supports or mount needed
Credits and license
The mount was designed around the 2020 Cable Clamp by ed_419522 https://www.printables.com/model/307909-2020-cable-clamp
Copyright 2024, Pavlos Iliopoulos.
2020 Aplic Cam Mount is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
2020 Aplic Cam Mount is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see <https://www.gnu.org/licenses/>.
The author does not hold any copyright or has any affiliation with aplic and/or its products.