1.9 KiB
1.9 KiB
V0 Stealth Bumper
A low-poly front bumper for your Voron 3D Printer
Compatible with:
Supports the Rainbow Barf Logo LED or a Neopixel Mini Button.
BOM
| Item | Qty. |
|---|---|
| M3x5x4 Heatset Insert | 2 |
| M3 Hex Nut | 2 |
| M3x6 BHCS | 4 |
| Neopixel Mini Button | 1 |
| Rainbow Barf Logo LED | 1 |
Note: Only one LED Option is required. Either the Neopixel Mini Button, or the Rainbow Barf Logo LED
Printing
- Use standard Voron print settings for all parts.
- use a clear filament for parts with the
[c]prefix. - print
[a]_main_body.stl - for Rainbow Barf, print
[c]_rainbow_barf_diffuser.stlandrainbow_barf_carrier.stl - for Neopixel Mini Button print
[c]_neopixel_button_diffuser.stlandneopixel_button_carrier.stl
Assembly
- Remove the 2 supports inside the hexagonal hole of
main_body - Install 2 heatset inserts into the back of
main_body - Press the clear diffuser into
logo_insert - Press
logo_insertintomain_body - Press LED (Rainbow Barf, or Neopixel Mini Button) into the appropriate carrier. Solder wires either before, or after if necessary. (you may not be able to fit a jst connector through the carrier)
- Fit the carrier to the back of
main_bodyand fasten with 2 M3x6 BHCS - Attach
main_bodyto the front of the kirigami bed frame, using 2 M3 hex nuts and 2 M3x6 BHCS
Credits
- Cameron at LDO Motors for the initial work on fitting a StealthBurner diffuser in the design
- WhoppingPochard and VinnyCordeiro for the Rainbow Barf Logo LED