45 lines
1.5 KiB
Markdown
45 lines
1.5 KiB
Markdown
# Overview:
|
|
|
|
This mod adds a mount for the BigTreeTech PiTFT. Currently the mod works for the PiTFT70, but im planning on adding a 5" and 3,5" option.
|
|
The Mount allows the doors to work without any mods and doesnt protude beyond the Skirts. It adds about 11cm to the depth of the printer.
|
|
|
|
|
|
|
|
|
|
|
|
## BOM:
|
|
|
|
- 1x M3 T-Nut/Hammerhead Nut
|
|
- 1x M3x8mm SHCS
|
|
- 2x M5 T-Nut/Hammerhead Nut
|
|
- 2x M5x10mm BHCS
|
|
- 4x M2,5x14mm BHCS _**OR**_ 4x any M2,5 longer than 6mm
|
|
- 1x PiTFT70
|
|
- 1x Flat Flexible Cable 50cm or longer for Pi Cam/Pi Display
|
|
|
|
M2,5x14mm screws are included in the Display, the included Flex Cable is too short.
|
|
|
|
|
|
|
|
## Printing
|
|
|
|
All Parts are already in the right orientation. Use the standard Voron Specs for printing.
|
|
|
|
## Installation
|
|
|
|
1. Attach the 2 Mounts to the Frame with the M5 screws, feed the Cable through the Slot in the middle Skirt and mount it with the M3 screws.
|
|
|
|
2. Feed the Cable through the back of the Housing and attach it to the Display (unisolated part faces display). Use the Raspberry Mounts to attach the Display/Housing to the Frame.
|
|
|
|
3. Simply Push the Front Housing onto the back, it should fit
|
|
|
|
4. Connect the FFC to the Pis Display port (unisolated part faces towards USB).
|
|
|
|
5. Install Klipperscreen via KIAUTH or by doing it manually.
|
|
|
|
6. If the Display is flipped upside down, hit the toggle switch. Adjust the brightness as needed.
|
|
|
|
Here is a picture of how the FFC should be routed:
|
|
|
|
|