16 lines
952 B
Markdown
16 lines
952 B
Markdown
# LED Strip Holder
|
|
|
|
<img src="Images/LED_Strip_Example.jpg" width="300" alt="LED Strip">
|
|
|
|
Works on Trident & 2.4 any size.
|
|
|
|
This mod lets you mount LED strips inside your printer. I mounted three in mine and it is like daylight inside the box.
|
|
|
|
I used [these 24V strips](https://www.amazon.com/gp/product/B00XH59VG4) from Amazon and connected them to a fan output on my Octopus board. Works a treat.
|
|
|
|
You can mount as many "strips" in your printer as you like. I have one on the front rail and one on each side for a total of three. You can cut the strip at the solder obrounds and connect them with wire to go around the corners. I run the wire in the extrusion down to the controller and use an extrusion cover to hold the wires in.
|
|
|
|
<img src="Images/LED_Holder_ISO.png" width="300" alt="Front View"> <img src="Images/LED_Holder_Side_View.png" width="100" alt="ISO View">
|
|
|
|
<img src="Images/LED_Holder_Picture.jpg" width="300" alt="Voron LED Holder">
|