diff --git a/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Front_and_Rear_Midclip_3mm_Panels_x2.stl b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Front_and_Rear_Midclip_3mm_Panels_x2.stl
new file mode 100644
index 000000000..6039f34e0
Binary files /dev/null and b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Front_and_Rear_Midclip_3mm_Panels_x2.stl differ
diff --git a/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Left_and_Right_Midclip_3mm_Panels_x2.stl b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Left_and_Right_Midclip_3mm_Panels_x2.stl
new file mode 100644
index 000000000..a70a64da2
Binary files /dev/null and b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Left_and_Right_Midclip_3mm_Panels_x2.stl differ
diff --git a/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Lower_Corner_1_and_3_Clip_3mm_Panels_x2.stl b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Lower_Corner_1_and_3_Clip_3mm_Panels_x2.stl
new file mode 100644
index 000000000..7df9ad6d3
Binary files /dev/null and b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Lower_Corner_1_and_3_Clip_3mm_Panels_x2.stl differ
diff --git a/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Lower_Corner_2_and_4_Clip_3mm_Panels_x2.stl b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Lower_Corner_2_and_4_Clip_3mm_Panels_x2.stl
new file mode 100644
index 000000000..9baa4650a
Binary files /dev/null and b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Lower_Corner_2_and_4_Clip_3mm_Panels_x2.stl differ
diff --git a/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Readme.md b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Readme.md
new file mode 100644
index 000000000..4257ae13c
--- /dev/null
+++ b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Readme.md
@@ -0,0 +1,2 @@
+Printed Solid sells 1.8" (3mm+), these do not work with the spec parts. I modifed all the "clamps" to accommodate 1.5mm extra (you can then shim as needed, I did not have to after carefully deburring all parts)
+Printed and Tested! Makes the assembly actually fit on the printer as intended perfectly.
diff --git a/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Upper_Corner_1_and_3_Clip_3mm_Panels_x2.stl b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Upper_Corner_1_and_3_Clip_3mm_Panels_x2.stl
new file mode 100644
index 000000000..0793049bb
Binary files /dev/null and b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Upper_Corner_1_and_3_Clip_3mm_Panels_x2.stl differ
diff --git a/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Upper_Corner_2_and_4_Clip_3mm_Panels_x2.stl b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Upper_Corner_2_and_4_Clip_3mm_Panels_x2.stl
new file mode 100644
index 000000000..dddd8fe5e
Binary files /dev/null and b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/Upper_Corner_2_and_4_Clip_3mm_Panels_x2.stl differ
diff --git a/printer_mods/README.md b/printer_mods/README.md
index 662565c28..5756fbf38 100644
--- a/printer_mods/README.md
+++ b/printer_mods/README.md
@@ -134,6 +134,7 @@ like so:
 |littleferris |[V0 c14 Skirt Inlet](./littleferris/V0_Skirt_Inlet) |V0 C14 Skirt inlet |:heavy_check_mark: |:x: |:x: |:x:|
 |LoCoCNC| [MGN7H Shims](./LoCoCNC/MGN7H_Shims) | Shims for making bearing cartridges coplanar |:heavy_check_mark:|:x:|:x:|:x:|
 | | [Mosquito PTFE 15mm Tube Cutting Jig](./LoCoCNC/Mosquito_PTFE_Cutting_Jig) | Tool to precicely cut 15mm PTFE Tube |:heavy_check_mark:|:x:|:x:|:x:|
+| | [3mm Top Hat Panels Clips](./LoCoCNC/3mm_tophat_panel_parts) | Required to use the 3mm (1/8") thick top hat panels for V0.1 |:heavy_check_mark:|:x:|:x:|:x:|
 |Long| [Mantis Dual 5015 Toolhead](./Long/Mantis_Dual_5015) | v2.4 MGN12 Dual 5015 Toolhead  |:x:|:x:|:heavy_check_mark:|:x:|
 |madros |[V0 OLED-skirt](./madros/V0_skirt_OLED) |V0 skirt with 0.96" OLED|:heavy_check_mark: |:x: |:x: |:x:|
 |MarcPot |[UHP PSU Bracket Clip](./MarcPot/UHP_PSU_Bracket_Clip)|DIN rail mount for the Mean Well UHP series PSU. |:grey_question: |:grey_question: |:heavy_check_mark: |:x:|