zach
/
VoronUsers
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update various READMEs to pass markup validation (#245) 

* Update various READMEs to pass markup validation

* case sensitivity

* one more typo
This commit is contained in:
John Jardine 2021-02-06 11:57:20 -05:00 committed by GitHub
parent 086c63d475
commit 67db750fc3
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
3 changed files with 4 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
printer_mods/BlueBear/Wago_221_mount/README.md
View File

@ -6,14 +6,14 @@ This mod is derived from [wago_221_mount](../../../legacy_printers/printer_mods/
mounts for the Wago 221 terminals (2 and 3 contacts) to clip and to screw for 1515 extrusions.
## Wago-Mount for screws
I use this mount [WAGO_221-413_3x3-mount-screw.stl](./WAGO_221-413_3x3-mount_screw.stl) at the power inlet to distribute the power to pad/ssr and the PSU. There is also a [WAGO_221-412_3x2-mount-screw.stl](./WAGO_221-412_3x2-mount-screw.stl), if you plan using Wago 221-412 (2 contacts).
I use this mount [WAGO_221-413_3x3-mount-screw.stl](./WAGO_221-413_3x3-mount-screw.stl) at the power inlet to distribute the power to pad/ssr and the PSU. There is also a [WAGO_221-412_3x2-mount_screw.stl](./WAGO_221-412_3x2-mount_screw.stl), if you plan using Wago 221-412 (2 contacts).
![Screw Mount Usage](./images/ScrewMountUsage.jpg "Screw Mount Usage")
Any m3 screw - BHCS or SHCS - should fit.
## Snap-In mounts
The snap-in mounts can be easily attached and removed from the extrusions. For using that mount print the desired stl
([WAGO_221-412_3x2-mount.stl](./WAGO_221-412_3x2-mount.stl) or [WAGO_221-412_5x2-mount.stl](./WAGO_221-412_5x2-mount.stl)
together with at least two of the mounting clips(either [LDO](./1515_SnapIn_LDO.stl) or [MakerBeam](./1515_Snapin_Makerbeam) depending on your extrusion).
together with at least two of the mounting clips(either [LDO](./1515_SnapIn_LDO.stl) or [MakerBeam](./1515_SnapIn_Makerbeam.stl) depending on your extrusion).
Don't rotate the clips for printing. They must be printed upright, as shown in the picture. Otherwise the clips might break upon inserting into the extrusion.

2
printer_mods/README.md
View File

@ -80,11 +80,9 @@ like so:
| | [Drawer](./JNP/Drawer)| Drawer in four different versions | :heavy_check_mark: |:x: |:x: |:x: |
| | [Front Door](./JNP/Front-Door)| Door in a frame | :heavy_check_mark: |:x: |:x: |:x: |
| | [Hepa Filter](./JNP/HEPA-Filter)| Filter case with fan´s | :heavy_check_mark: |:x: |:x: |:x: |
| | [Hotend PCB and Pushfitting](./JNP/Hotend_PCB_and_PTFE_Tube_mounting) | easy mounting for PCB and Pushfitting | :heavy_check_mark: |:x: |:x: |:x: |
| | [Mid Panel](./JNP/Mid-Panel)| Panel for SKR1.4/1.4 or SKR E3 mini mount | :heavy_check_mark: |:x: |:x: |:x: |
| | [Neopixel Case](./JNP/Neopixel-Y_Rails) | mounting for Neopixel strip with 8 LED´s | :heavy_check_mark: |:x: |:x: |:x: |
| | [Side Panels](./JNP/Side-Panels) | Panels with intergrated hinge | :heavy_check_mark: |:x: |:x: |:x: |
| | [Power supply distribution](./JNP/Supply-Distribution) | Case for power switch, supply PCB and cable chain for drawer | :heavy_check_mark: | :x: |:x: |:x: |
| KenadyDwag44 | [Switchwire Lightbar](./KenadyDwag44/sw_lightbar) | A LED lightbar for switchwire | :x: | :x: | :x: | :heavy_check_mark: |
| KiloQubit | [V0 Reverse Bowden Mount](./KiloQubit/V0_reverse_bowden_mount)| V0 reverse bowden mount | :heavy_check_mark: | :x: | :x: |:x:|
| | [V2.4 Z Chain Mounts for 3 Hole Chains](./KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts)| Z chain mounts for 3 hole generic chain | :x: | :x: | :heavy_check_mark: |:x:|

2
printer_mods/arkeet/magnet-fan-cover/README.md
View File

@ -24,7 +24,7 @@ until they bottom out; the heads should protrude 4mm from the surface.
Images
------
![Photo](images/photo.jpg|width=)
![Photo](images/photo.jpg)
![Render](images/render1.png)