From 67db750fc320ac4a0d7e804bbd5c447d81e1da0a Mon Sep 17 00:00:00 2001 From: John Jardine Date: Sat, 6 Feb 2021 11:57:20 -0500 Subject: [PATCH] Update various READMEs to pass markup validation (#245) * Update various READMEs to pass markup validation * case sensitivity * one more typo --- printer_mods/BlueBear/Wago_221_mount/README.md | 6 +++--- printer_mods/README.md | 2 -- printer_mods/arkeet/magnet-fan-cover/README.md | 2 +- 3 files changed, 4 insertions(+), 6 deletions(-) diff --git a/printer_mods/BlueBear/Wago_221_mount/README.md b/printer_mods/BlueBear/Wago_221_mount/README.md index a61206250..40ea0aa95 100644 --- a/printer_mods/BlueBear/Wago_221_mount/README.md +++ b/printer_mods/BlueBear/Wago_221_mount/README.md @@ -6,14 +6,14 @@ This mod is derived from [wago_221_mount](../../../legacy_printers/printer_mods/ mounts for the Wago 221 terminals (2 and 3 contacts) to clip and to screw for 1515 extrusions. ## Wago-Mount for screws -I use this mount [WAGO_221-413_3x3-mount-screw.stl](./WAGO_221-413_3x3-mount_screw.stl) at the power inlet to distribute the power to pad/ssr and the PSU. There is also a [WAGO_221-412_3x2-mount-screw.stl](./WAGO_221-412_3x2-mount-screw.stl), if you plan using Wago 221-412 (2 contacts). +I use this mount [WAGO_221-413_3x3-mount-screw.stl](./WAGO_221-413_3x3-mount-screw.stl) at the power inlet to distribute the power to pad/ssr and the PSU. There is also a [WAGO_221-412_3x2-mount_screw.stl](./WAGO_221-412_3x2-mount_screw.stl), if you plan using Wago 221-412 (2 contacts). ![Screw Mount Usage](./images/ScrewMountUsage.jpg "Screw Mount Usage") Any m3 screw - BHCS or SHCS - should fit. ## Snap-In mounts The snap-in mounts can be easily attached and removed from the extrusions. For using that mount print the desired stl ([WAGO_221-412_3x2-mount.stl](./WAGO_221-412_3x2-mount.stl) or [WAGO_221-412_5x2-mount.stl](./WAGO_221-412_5x2-mount.stl) -together with at least two of the mounting clips(either [LDO](./1515_SnapIn_LDO.stl) or [MakerBeam](./1515_Snapin_Makerbeam) depending on your extrusion). +together with at least two of the mounting clips(either [LDO](./1515_SnapIn_LDO.stl) or [MakerBeam](./1515_SnapIn_Makerbeam.stl) depending on your extrusion). Don't rotate the clips for printing. They must be printed upright, as shown in the picture. Otherwise the clips might break upon inserting into the extrusion. @@ -27,4 +27,4 @@ Both mounts fit into the Z-Extrusions of the V0: ![5x Wago Mount](./images/picSnapMount5piece.jpg) -![3x Wago Mount](./images/picSnapMount3piece.jpg) \ No newline at end of file +![3x Wago Mount](./images/picSnapMount3piece.jpg) diff --git a/printer_mods/README.md b/printer_mods/README.md index fbd21f146..09b760cec 100644 --- a/printer_mods/README.md +++ b/printer_mods/README.md @@ -80,11 +80,9 @@ like so: | | [Drawer](./JNP/Drawer)| Drawer in four different versions | :heavy_check_mark: |:x: |:x: |:x: | | | [Front Door](./JNP/Front-Door)| Door in a frame | :heavy_check_mark: |:x: |:x: |:x: | | | [Hepa Filter](./JNP/HEPA-Filter)| Filter case with fan´s | :heavy_check_mark: |:x: |:x: |:x: | -| | [Hotend PCB and Pushfitting](./JNP/Hotend_PCB_and_PTFE_Tube_mounting) | easy mounting for PCB and Pushfitting | :heavy_check_mark: |:x: |:x: |:x: | | | [Mid Panel](./JNP/Mid-Panel)| Panel for SKR1.4/1.4 or SKR E3 mini mount | :heavy_check_mark: |:x: |:x: |:x: | | | [Neopixel Case](./JNP/Neopixel-Y_Rails) | mounting for Neopixel strip with 8 LED´s | :heavy_check_mark: |:x: |:x: |:x: | | | [Side Panels](./JNP/Side-Panels) | Panels with intergrated hinge | :heavy_check_mark: |:x: |:x: |:x: | -| | [Power supply distribution](./JNP/Supply-Distribution) | Case for power switch, supply PCB and cable chain for drawer | :heavy_check_mark: | :x: |:x: |:x: | | KenadyDwag44 | [Switchwire Lightbar](./KenadyDwag44/sw_lightbar) | A LED lightbar for switchwire | :x: | :x: | :x: | :heavy_check_mark: | | KiloQubit | [V0 Reverse Bowden Mount](./KiloQubit/V0_reverse_bowden_mount)| V0 reverse bowden mount | :heavy_check_mark: | :x: | :x: |:x:| | | [V2.4 Z Chain Mounts for 3 Hole Chains](./KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts)| Z chain mounts for 3 hole generic chain | :x: | :x: | :heavy_check_mark: |:x:| diff --git a/printer_mods/arkeet/magnet-fan-cover/README.md b/printer_mods/arkeet/magnet-fan-cover/README.md index c7231d686..a053740a6 100644 --- a/printer_mods/arkeet/magnet-fan-cover/README.md +++ b/printer_mods/arkeet/magnet-fan-cover/README.md @@ -24,7 +24,7 @@ until they bottom out; the heads should protrude 4mm from the surface. Images ------ -![Photo](images/photo.jpg|width=) +![Photo](images/photo.jpg) ![Render](images/render1.png)