V0 1515 T-Nuts (#260)

* t-nut

* readme

* link

* image

* images

* readme

* Delete IMG1.jpg

* Create IMG1.jpg

* img0

* img1

* img3

* Update IMG3.jpg

Co-authored-by: tz <48024745+Zen3Dhu@users.noreply.github.com>
Co-authored-by: KiloQubit <69389593+KiloQubit@users.noreply.github.com>

printer_mods/README.md

@@ -167,5 +167,6 @@ like so:
 | | [DuetZero](./xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |:x:|
 | Zen3D | [V0 Handle](./Zen3D/V0_Handle)| Voron0 Handle for 3mm panels | :heavy_check_mark: |:x: |:x: |:x:|
 | | [V0 MidPanel HexPattern](./Zen3D/V0_MidPanel_HexPattern)| Voron0 MidPanel with Hex pattern and Wire cover  | :heavy_check_mark: |:x: |:x: |:x:|
+| | [V0 1515 T-nut](./Zen3D/V0_1515_T-nut)| M3 square and hex nuts for Voron0 1515 frame | :heavy_check_mark: |:x: |:x: |:x:|
 
 ---

printer_mods/Zen3D/V0_1515_T-nut/README.md

@@ -0,0 +1,23 @@
+# Voron0 1515 T-Nut
+
+It is a great help during installation to prevent the nuts from moving. During the construction of Voron0, it comes in very handy with the screws of MidPanel, TopHat, BedMount.
+
+
+## hardware:
+
+- M3 Square Nuts from Aliexpress (5.5mm x 5.5mm x 2mm)  (Recommended!)
+
+or
+
+- M3 hex nuts. The hex nut is too high, it is difficult to print because only one or two layers get under the nut. (depending on the frame) But it also works.
+
+
+The MakerBeam version is lower than the LDO version.  
+
+## print settings:
+
+- layer height: 0.2mm
+
+![IMG1](./IMG1.jpg)
+![IMG2](./IMG2.jpg)
+![IMG3](./IMG3.jpg)