diff --git a/printer_mods/README.md b/printer_mods/README.md
index 7703e4c22..cee675513 100644
--- a/printer_mods/README.md
+++ b/printer_mods/README.md
@@ -167,5 +167,6 @@ like so:
 | | [DuetZero](./xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |:x:|
 | Zen3D | [V0 Handle](./Zen3D/V0_Handle)| Voron0 Handle for 3mm panels | :heavy_check_mark: |:x: |:x: |:x:|
 | | [V0 MidPanel HexPattern](./Zen3D/V0_MidPanel_HexPattern)| Voron0 MidPanel with Hex pattern and Wire cover  | :heavy_check_mark: |:x: |:x: |:x:|
+| | [V0 1515 T-nut](./Zen3D/V0_1515_T-nut)| M3 square and hex nuts for Voron0 1515 frame | :heavy_check_mark: |:x: |:x: |:x:|
 
 ---
\ No newline at end of file
diff --git a/printer_mods/Zen3D/V0_1515_T-nut/IMG1.jpg b/printer_mods/Zen3D/V0_1515_T-nut/IMG1.jpg
new file mode 100644
index 000000000..309c3a460
Binary files /dev/null and b/printer_mods/Zen3D/V0_1515_T-nut/IMG1.jpg differ
diff --git a/printer_mods/Zen3D/V0_1515_T-nut/IMG2.jpg b/printer_mods/Zen3D/V0_1515_T-nut/IMG2.jpg
new file mode 100644
index 000000000..7584a62c5
Binary files /dev/null and b/printer_mods/Zen3D/V0_1515_T-nut/IMG2.jpg differ
diff --git a/printer_mods/Zen3D/V0_1515_T-nut/IMG3.jpg b/printer_mods/Zen3D/V0_1515_T-nut/IMG3.jpg
new file mode 100644
index 000000000..328a09e7d
Binary files /dev/null and b/printer_mods/Zen3D/V0_1515_T-nut/IMG3.jpg differ
diff --git a/printer_mods/Zen3D/V0_1515_T-nut/LDO/HexNut_1515.stl b/printer_mods/Zen3D/V0_1515_T-nut/LDO/HexNut_1515.stl
new file mode 100644
index 000000000..f93591dbd
Binary files /dev/null and b/printer_mods/Zen3D/V0_1515_T-nut/LDO/HexNut_1515.stl differ
diff --git a/printer_mods/Zen3D/V0_1515_T-nut/LDO/SquareNut_1515.stl b/printer_mods/Zen3D/V0_1515_T-nut/LDO/SquareNut_1515.stl
new file mode 100644
index 000000000..882d37486
Binary files /dev/null and b/printer_mods/Zen3D/V0_1515_T-nut/LDO/SquareNut_1515.stl differ
diff --git a/printer_mods/Zen3D/V0_1515_T-nut/MakerBeam/HexNut_1515.stl b/printer_mods/Zen3D/V0_1515_T-nut/MakerBeam/HexNut_1515.stl
new file mode 100644
index 000000000..96399c0c5
Binary files /dev/null and b/printer_mods/Zen3D/V0_1515_T-nut/MakerBeam/HexNut_1515.stl differ
diff --git a/printer_mods/Zen3D/V0_1515_T-nut/MakerBeam/SquareNut_1515.stl b/printer_mods/Zen3D/V0_1515_T-nut/MakerBeam/SquareNut_1515.stl
new file mode 100644
index 000000000..12e146347
Binary files /dev/null and b/printer_mods/Zen3D/V0_1515_T-nut/MakerBeam/SquareNut_1515.stl differ
diff --git a/printer_mods/Zen3D/V0_1515_T-nut/README.md b/printer_mods/Zen3D/V0_1515_T-nut/README.md
new file mode 100644
index 000000000..0066e9fb8
--- /dev/null
+++ b/printer_mods/Zen3D/V0_1515_T-nut/README.md
@@ -0,0 +1,23 @@
+# Voron0 1515 T-Nut
+
+It is a great help during installation to prevent the nuts from moving. During the construction of Voron0, it comes in very handy with the screws of MidPanel, TopHat, BedMount.
+
+
+## hardware:
+
+- M3 Square Nuts from Aliexpress (5.5mm x 5.5mm x 2mm)  (Recommended!)
+
+or
+
+- M3 hex nuts. The hex nut is too high, it is difficult to print because only one or two layers get under the nut. (depending on the frame) But it also works.
+
+
+The MakerBeam version is lower than the LDO version.  
+
+## print settings:
+
+- layer height: 0.2mm
+
+![IMG1](./IMG1.jpg)
+![IMG2](./IMG2.jpg)
+![IMG3](./IMG3.jpg)