diff --git a/printer_mods/README.md b/printer_mods/README.md index 6836a3819..cac64b60e 100644 --- a/printer_mods/README.md +++ b/printer_mods/README.md @@ -126,7 +126,7 @@ like so: | | [V0 beltchains](./Iakabos/V0_beltchain)|Modified beltchain parts for V0 Z cables|:heavy_check_mark: |:x: |:x: |:x:| |jasonc |[V2.4 Z-Idler Shoulder Bolt Mod](./jasonc/Z_Idler_Shoulder_Bolt) |Modification to the idler carriers to accept a 25mm shoulder bolt. Ideal for Gates idlers. |:x: |:x: |:heavy_check_mark: |:x:| |jeoje |[V2.4 Z Chain Guide with Integrated Chamber Thermistor Mount](./jeoje/Z_Chain_Guide_Thermistor_Mount) | Modifies the Z chain guide to hold a chamber thermistor |:x: |:x: |:heavy_check_mark: |:x:| -| | [V2.4 4.3" Touchscreen Mount](./jeoje/4.3_Inch_Touchscreen_Mount) | Mounts a [Waveshare 4.3inch Capacitive Touch Display](https://www.waveshare.com/4.3inch-dsi-lcd.htm) to v2.4 Vorons |:x:|:x:|:heavy_check_mark:|:x:| +| | [4.3" Touchscreen Mount](./jeoje/4.3_Inch_Touchscreen_Mount) | Mounts a [Waveshare 4.3inch Capacitive Touch Display](https://www.waveshare.com/4.3inch-dsi-lcd.htm) to v2.4 and Switchwire Vorons |:x:|:x:|:heavy_check_mark:|:heavy_check_mark:| | | [Sturdy Handles](./jeoje/Sturdy_Handles) | Modified v2.2 handles with no panel rest and with 4 anchor points |:x: |:grey_question:|:heavy_check_mark:|:x:| | | [Molex MLX and Microfit 3.0 Bed Connector Mount](./jeoje/Molex_MLX_Microfit_Bed_Connector_Mount) | Solid mount your bed connectors |:x: |:x:|:heavy_check_mark:|:x:| | JNP | [Back Door](./JNP/Back-Door) | Door for easy hardware access | :heavy_check_mark: |:x: |:x: |:x: | diff --git a/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/README.md b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/README.md index 77b58c04e..467846b00 100644 --- a/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/README.md +++ b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/README.md @@ -1,4 +1,4 @@ -# Voron v2.4 4.3" Touchscreen Mount +# Voron v2.4 & Switchwire 4.3" Touchscreen Mount Inspired by [Roboticator's excellent 4" touchscreen mount](../../roboticator24/4inch_touchscreen_mount_for_v2.4), I wanted to use a capacitive touchscreen and a DSI connection instead. @@ -15,15 +15,23 @@ This mod mounts a [Waveshare 4.3inch Capacitive Touch Display](https://www.waves #### Combine with [Roboticator's modified skirts](https://github.com/roboticator24/VoronUsers/tree/master/printer_mods/roboticator24/front%2Brear_skirts_for_v2.4) for a cleaner look. +## 2.4
+## Switchwire +
+ + +
+ ## Parts Required | Part | Quantity | Comment| |------|------|--------| -| M3 X 8 SHCS/BHCS Screw | 3 | | +| M3 X 8 SHCS/BHCS Screw | 3 |2.4 only| +| M3 X 16 SHCS/BHCS Screw | 2 |Switchwire only| | M3 T-Nut | 3 | | | M2 x 10 Self Tapping Screws | 2 | Optional | | M2.5 Screws | 4 | Included with screen | @@ -44,9 +52,13 @@ This mod mounts a [Waveshare 4.3inch Capacitive Touch Display](https://www.waves ## Installation 1. Attach the screen to the mount using 4 x M2.5 screws that were included with the screen 1. Ensure the screen slid as high on the mount as possible -2. Slide the faceplate onto the screen from the bottom, ensuring the sides remain latched behind the PCB -3. Fasten the mount to the bottom extrusion in place of the spec LCD/mount - 1. You may need to leave the screen screws slightly loose to ensure the M3 screws clear it. Ensure to tighten afterwards. +2. Slide the faceplate onto the screen from the bottom (for switchwire from top), ensuring the sides remain latched behind the PCB +3. Fasten the mount + 1. 2.4 + 1. Fasten the mount to the bottom extrusion in place of the spec LCD/mount + 2. You may need to leave the screen screws slightly loose to ensure the M3 screws clear it. Ensure to tighten afterwards. + 2. Switchwire + 1. Screw the mount at the same grill position as the 12864 display 4. Slide the faceplate up until it is flush to the extrusion 5. Optional: Secure the faceplate with (2) 2 x 10 self tapping screws through the tabs on each side 6. Connect your DSI cable \ No newline at end of file diff --git a/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/STL/faceplate.stl b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/STL/2.4/faceplate.stl similarity index 100% rename from printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/STL/faceplate.stl rename to printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/STL/2.4/faceplate.stl diff --git a/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/STL/screen_mount.stl b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/STL/2.4/screen_mount.stl similarity index 100% rename from printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/STL/screen_mount.stl rename to printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/STL/2.4/screen_mount.stl diff --git a/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/STL/Switchwire/faceplate.stl b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/STL/Switchwire/faceplate.stl new file mode 100644 index 000000000..d9a967a41 Binary files /dev/null and b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/STL/Switchwire/faceplate.stl differ diff --git a/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/STL/Switchwire/screen_mount.stl b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/STL/Switchwire/screen_mount.stl new file mode 100644 index 000000000..4f4218199 Binary files /dev/null and b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/STL/Switchwire/screen_mount.stl differ diff --git a/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/images/Mounted_SW_1.jpg b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/images/Mounted_SW_1.jpg new file mode 100644 index 000000000..c64d1ca95 Binary files /dev/null and b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/images/Mounted_SW_1.jpg differ diff --git a/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/images/Mounted_SW_2.jpg b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/images/Mounted_SW_2.jpg new file mode 100644 index 000000000..506c0bb25 Binary files /dev/null and b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/images/Mounted_SW_2.jpg differ