Updated Readme and latest printer.cfg

firmware_configurations/README.md

@@ -23,7 +23,7 @@ If your mod is lacking a column in the compatibility matrix, feel free to submit
 
 | Creator | Config title | Description | V1.6 | V2.1 | V2.2 |
 |---------|--------------|-------------|------|------|------|
-| bryansj  | [SKR 1.3 V2.2 Extra Settings for Reference](./klipper/eddie) | Voron Design VORON2.2 300mm SKR 1.3 TMC2209 config with Extra Features Enabled for Reference | :x: | :grey_question: | :heavy_check_mark: |
+| bryansj  | [SKR 1.3 V2.2 Extra Settings for Reference](./klipper/bryansj) | Voron Design VORON2.2 300mm SKR 1.3 TMC2209 config with Extra Features Enabled for Reference | :x: | :grey_question: | :heavy_check_mark: |
 | Chron   | [SKR 1.3 TMC2208 UART Config](./klipper/Chron) | Configuration for SKR 1.3 TMC2208 UART | :x: | :heavy_check_mark: | :grey_question: |
 | Danowar  | [FYSETC F6 1.3 Klipper Config](./klipper/Danowar/FYSETC_F6_V1.3_Klipper_Config) | Klipper config for a FYSETC F6 350 build. UPDATED 11/14/19 | :x: | :heavy_check_mark: | :heavy_check_mark: |
 | eddie  | [SKR 1.3 V2 Universal Config](./klipper/eddie) | Universal Config and Setup Guide for SKR 1.3 and V2 | :x: | :heavy_check_mark: | :heavy_check_mark: |

firmware_configurations/klipper/bryansj/SKR_TMC2209_Mods.cfg

@@ -105,7 +105,7 @@ serial: /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.4:1.
 [printer]
 kinematics: corexy
 max_velocity: 300  
-max_accel: 3000    #Max 4000
+max_accel: 4000    #Max 4000
 max_z_velocity: 25 #Max 50
 max_z_accel: 350   #Max 800
 square_corner_velocity: 5.0  #Can experiment with 8.0, default 5.0
@@ -158,7 +158,7 @@ uart_pin: P1.17
 microsteps: 16
 interpolate: True
 run_current: 1.0
-hold_current: 0.9
+hold_current: 1.0
 sense_resistor: 0.110
 stealthchop_threshold: 0
 
@@ -183,7 +183,7 @@ uart_pin: P1.15
 microsteps: 16
 interpolate: True
 run_current: 1.0
-hold_current: 0.9
+hold_current: 1.0
 sense_resistor: 0.110
 stealthchop_threshold: 0
  
@@ -217,7 +217,7 @@ uart_pin: z:P1.17
 microsteps: 16
 interpolate: False
 run_current: 1.0
-hold_current: 0.8
+hold_current: 1.0
 sense_resistor: 0.110
 stealthchop_threshold: 0
 
@@ -234,7 +234,7 @@ uart_pin: z:P1.15
 microsteps: 16
 interpolate: False
 run_current: 1.0
-hold_current: 0.80
+hold_current: 1.0
 sense_resistor: 0.110
 stealthchop_threshold: 0
 
@@ -251,7 +251,7 @@ uart_pin: z:P1.10
 microsteps: 16
 interpolate: False
 run_current: 1.0
-hold_current: 0.80
+hold_current: 1.0
 sense_resistor: 0.110
 stealthchop_threshold: 0
 
@@ -268,7 +268,7 @@ uart_pin: z:P1.8
 microsteps: 16
 interpolate: False
 run_current: 1.0
-hold_current: 0.80
+hold_current: 1.0
 sense_resistor: 0.110
 stealthchop_threshold: 0
 
@@ -604,6 +604,152 @@ type: item
 name: "  [In progress]"
 cursor: \x20
 
+[menu __temp]
+type: list
+name: Temperature
+items:
+    .__hotend0_current, .__hotend0_target
+    .__hotend1_current, .__hotend1_target
+    .__hotbed_current, .__hotbed_target
+    .__preheat_pla
+    .__preheat_abs
+    .__cooldown
+
+[menu __temp __hotend0_current]
+type: item
+enable: extruder.is_enabled
+name: "Ex0:{0:4.0f} T"
+parameter: extruder.temperature
+
+[menu __temp __hotend0_target]
+type: input
+enable: extruder.is_enabled
+name: "{0:4.0f}"
+parameter: extruder.target
+input_min: 0
+input_max: 250
+input_step: 1
+input_step2: 10
+gcode: M104 T0 S{0:.0f}
+
+[menu __temp __hotend1_current]
+type: item
+enable: extruder1.is_enabled
+name: "Ex1:{0:4.0f} T"
+parameter: extruder1.temperature
+
+[menu __temp __hotend1_target]
+type: input
+enable: extruder1.is_enabled
+name: "{0:4.0f}"
+parameter: extruder1.target
+input_min: 0
+input_max: 250
+input_step: 1
+input_step2: 10
+gcode: M104 T1 S{0:.0f}
+
+[menu __temp __hotbed_current]
+type: item
+enable: heater_bed.is_enabled
+name: "Bed:{0:4.0f} T"
+parameter: heater_bed.temperature
+
+[menu __temp __hotbed_target]
+type: input
+enable: heater_bed.is_enabled
+name: "{0:4.0f}"
+parameter: heater_bed.target
+input_min: 0
+input_max: 130
+input_step: 1
+input_step2: 10
+gcode: M140 S{0:.0f}
+
+[menu __temp __preheat_pla]
+type: list
+name: Preheat PLA
+items:
+    .__all
+    .__hotend
+    .__hotbed
+
+[menu __temp __preheat_pla __all]
+type: command
+enable: extruder.is_enabled,heater_bed.is_enabled
+name: Preheat all
+gcode:
+    M140 S60
+    M104 S200
+
+[menu __temp __preheat_pla __hotend]
+type: command
+enable: extruder.is_enabled
+name: Preheat hotend
+gcode: M104 S200
+
+[menu __temp __preheat_pla __hotbed]
+type: command
+enable: heater_bed.is_enabled
+name: Preheat hotbed
+gcode: M140 S60
+
+[menu __temp __preheat_abs]
+type: list
+name: Preheat ABS
+items:
+    .__all
+    .__hotend
+    .__hotbed
+
+[menu __temp __preheat_abs __all]
+type: command
+enable: extruder.is_enabled,heater_bed.is_enabled
+name: Preheat all
+gcode:
+    M140 S105
+    M104 S235
+
+[menu __temp __preheat_abs __hotend]
+type: command
+enable: extruder.is_enabled
+name: Preheat hotend
+gcode: M104 S235
+
+[menu __temp __preheat_abs __hotbed]
+type: command
+enable: heater_bed.is_enabled
+name: Preheat hotbed
+gcode: M140 S105
+
+[menu __temp __cooldown]
+type: list
+name: Cooldown
+items:
+    .__all
+    .__hotend
+    .__hotbed
+
+[menu __temp __cooldown __all]
+type: command
+enable: extruder.is_enabled,heater_bed.is_enabled
+name: Cooldown all
+gcode:
+    M104 S0
+    M140 S0
+
+[menu __temp __cooldown __hotend]
+type: command
+enable: extruder.is_enabled
+name: Cooldown hotend
+gcode: M104 S0
+
+[menu __temp __cooldown __hotbed]
+type: command
+enable: heater_bed.is_enabled
+name: Cooldown hotbed
+gcode: M140 S0
+
 [menu __filament __load]
 type: command
 name: Load Filament
@@ -702,6 +848,12 @@ gcode:
 #   Print Start
 [gcode_macro PRINT_START]
 gcode:
+
+    G21                     ; mm Mode
+    G90                     ; absolute mode
+    M140 S<BED>             ; Heated bed control
+    M109 S<EXTRUDER>
+    M83                     ; Relative E
     G28                     ; home all axes
     G32                     ; level and clean
     PRIME_LINE
@@ -718,7 +870,7 @@ gcode:
     G0 Z1.00 X20.0 Y20.0 F20000    ; move nozzle to remove stringing
     TURN_OFF_HEATERS               ; turn off heaters
     M107                           ; turn off fan
-    M141 S25                       ; vent chamber setting fan to 25C
+    M141 S45                       ; vent chamber setting fan to 45C
     G1 Z2 F3000                    ; move nozzle up 2mm
     G90                            ; absolute positioning
     G0 X55 Y300 F3600              ; park nozzle at brush bin
@@ -830,8 +982,8 @@ gcode:
 # 	Reference POSITION_ENDSTOP Z Offset Settings
 #####################################################################
 
-# Energetic PEI Smooth Side = -1.100
+# Energetic PEI Smooth Side = -0.700
-# Energetci PEI Textured Side = -1.170
+# Energetci PEI Textured Side = -x.xxx
 
 #*# <---------------------- SAVE_CONFIG ---------------------->
 #*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
@@ -849,4 +1001,4 @@ gcode:
 #*# pid_kd = 100.816
 #*#
 #*# [stepper_z]
-#*# position_endstop = -1.100
+#*# position_endstop = -0.700