From 2e4d8f93188d5da69e16e9d1de22310e180d5f87 Mon Sep 17 00:00:00 2001 From: bryansj <40634870+bryansj@users.noreply.github.com> Date: Fri, 27 Dec 2019 21:18:43 -0500 Subject: [PATCH] Updated Readme and latest printer.cfg --- firmware_configurations/README.md | 2 +- .../klipper/bryansj/SKR_TMC2209_Mods.cfg | 174 ++++++++++++++++-- 2 files changed, 164 insertions(+), 12 deletions(-) diff --git a/firmware_configurations/README.md b/firmware_configurations/README.md index 9a75e9f7b..94e1d31ea 100644 --- a/firmware_configurations/README.md +++ b/firmware_configurations/README.md @@ -23,7 +23,7 @@ If your mod is lacking a column in the compatibility matrix, feel free to submit | Creator | Config title | Description | V1.6 | V2.1 | V2.2 | |---------|--------------|-------------|------|------|------| -| bryansj | [SKR 1.3 V2.2 Extra Settings for Reference](./klipper/eddie) | Voron Design VORON2.2 300mm SKR 1.3 TMC2209 config with Extra Features Enabled for Reference | :x: | :grey_question: | :heavy_check_mark: | +| bryansj | [SKR 1.3 V2.2 Extra Settings for Reference](./klipper/bryansj) | Voron Design VORON2.2 300mm SKR 1.3 TMC2209 config with Extra Features Enabled for Reference | :x: | :grey_question: | :heavy_check_mark: | | Chron | [SKR 1.3 TMC2208 UART Config](./klipper/Chron) | Configuration for SKR 1.3 TMC2208 UART | :x: | :heavy_check_mark: | :grey_question: | | Danowar | [FYSETC F6 1.3 Klipper Config](./klipper/Danowar/FYSETC_F6_V1.3_Klipper_Config) | Klipper config for a FYSETC F6 350 build. UPDATED 11/14/19 | :x: | :heavy_check_mark: | :heavy_check_mark: | | eddie | [SKR 1.3 V2 Universal Config](./klipper/eddie) | Universal Config and Setup Guide for SKR 1.3 and V2 | :x: | :heavy_check_mark: | :heavy_check_mark: | diff --git a/firmware_configurations/klipper/bryansj/SKR_TMC2209_Mods.cfg b/firmware_configurations/klipper/bryansj/SKR_TMC2209_Mods.cfg index 990631d39..049c132bf 100644 --- a/firmware_configurations/klipper/bryansj/SKR_TMC2209_Mods.cfg +++ b/firmware_configurations/klipper/bryansj/SKR_TMC2209_Mods.cfg @@ -105,7 +105,7 @@ serial: /dev/serial/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.4:1. [printer] kinematics: corexy max_velocity: 300 -max_accel: 3000 #Max 4000 +max_accel: 4000 #Max 4000 max_z_velocity: 25 #Max 50 max_z_accel: 350 #Max 800 square_corner_velocity: 5.0 #Can experiment with 8.0, default 5.0 @@ -158,7 +158,7 @@ uart_pin: P1.17 microsteps: 16 interpolate: True run_current: 1.0 -hold_current: 0.9 +hold_current: 1.0 sense_resistor: 0.110 stealthchop_threshold: 0 @@ -183,7 +183,7 @@ uart_pin: P1.15 microsteps: 16 interpolate: True run_current: 1.0 -hold_current: 0.9 +hold_current: 1.0 sense_resistor: 0.110 stealthchop_threshold: 0 @@ -217,7 +217,7 @@ uart_pin: z:P1.17 microsteps: 16 interpolate: False run_current: 1.0 -hold_current: 0.8 +hold_current: 1.0 sense_resistor: 0.110 stealthchop_threshold: 0 @@ -234,7 +234,7 @@ uart_pin: z:P1.15 microsteps: 16 interpolate: False run_current: 1.0 -hold_current: 0.80 +hold_current: 1.0 sense_resistor: 0.110 stealthchop_threshold: 0 @@ -251,7 +251,7 @@ uart_pin: z:P1.10 microsteps: 16 interpolate: False run_current: 1.0 -hold_current: 0.80 +hold_current: 1.0 sense_resistor: 0.110 stealthchop_threshold: 0 @@ -268,7 +268,7 @@ uart_pin: z:P1.8 microsteps: 16 interpolate: False run_current: 1.0 -hold_current: 0.80 +hold_current: 1.0 sense_resistor: 0.110 stealthchop_threshold: 0 @@ -604,6 +604,152 @@ type: item name: " [In progress]" cursor: \x20 +[menu __temp] +type: list +name: Temperature +items: + .__hotend0_current, .__hotend0_target + .__hotend1_current, .__hotend1_target + .__hotbed_current, .__hotbed_target + .__preheat_pla + .__preheat_abs + .__cooldown + +[menu __temp __hotend0_current] +type: item +enable: extruder.is_enabled +name: "Ex0:{0:4.0f} T" +parameter: extruder.temperature + +[menu __temp __hotend0_target] +type: input +enable: extruder.is_enabled +name: "{0:4.0f}" +parameter: extruder.target +input_min: 0 +input_max: 250 +input_step: 1 +input_step2: 10 +gcode: M104 T0 S{0:.0f} + +[menu __temp __hotend1_current] +type: item +enable: extruder1.is_enabled +name: "Ex1:{0:4.0f} T" +parameter: extruder1.temperature + +[menu __temp __hotend1_target] +type: input +enable: extruder1.is_enabled +name: "{0:4.0f}" +parameter: extruder1.target +input_min: 0 +input_max: 250 +input_step: 1 +input_step2: 10 +gcode: M104 T1 S{0:.0f} + +[menu __temp __hotbed_current] +type: item +enable: heater_bed.is_enabled +name: "Bed:{0:4.0f} T" +parameter: heater_bed.temperature + +[menu __temp __hotbed_target] +type: input +enable: heater_bed.is_enabled +name: "{0:4.0f}" +parameter: heater_bed.target +input_min: 0 +input_max: 130 +input_step: 1 +input_step2: 10 +gcode: M140 S{0:.0f} + +[menu __temp __preheat_pla] +type: list +name: Preheat PLA +items: + .__all + .__hotend + .__hotbed + +[menu __temp __preheat_pla __all] +type: command +enable: extruder.is_enabled,heater_bed.is_enabled +name: Preheat all +gcode: + M140 S60 + M104 S200 + +[menu __temp __preheat_pla __hotend] +type: command +enable: extruder.is_enabled +name: Preheat hotend +gcode: M104 S200 + +[menu __temp __preheat_pla __hotbed] +type: command +enable: heater_bed.is_enabled +name: Preheat hotbed +gcode: M140 S60 + +[menu __temp __preheat_abs] +type: list +name: Preheat ABS +items: + .__all + .__hotend + .__hotbed + +[menu __temp __preheat_abs __all] +type: command +enable: extruder.is_enabled,heater_bed.is_enabled +name: Preheat all +gcode: + M140 S105 + M104 S235 + +[menu __temp __preheat_abs __hotend] +type: command +enable: extruder.is_enabled +name: Preheat hotend +gcode: M104 S235 + +[menu __temp __preheat_abs __hotbed] +type: command +enable: heater_bed.is_enabled +name: Preheat hotbed +gcode: M140 S105 + +[menu __temp __cooldown] +type: list +name: Cooldown +items: + .__all + .__hotend + .__hotbed + +[menu __temp __cooldown __all] +type: command +enable: extruder.is_enabled,heater_bed.is_enabled +name: Cooldown all +gcode: + M104 S0 + M140 S0 + +[menu __temp __cooldown __hotend] +type: command +enable: extruder.is_enabled +name: Cooldown hotend +gcode: M104 S0 + +[menu __temp __cooldown __hotbed] +type: command +enable: heater_bed.is_enabled +name: Cooldown hotbed +gcode: M140 S0 + [menu __filament __load] type: command name: Load Filament @@ -702,6 +848,12 @@ gcode: # Print Start [gcode_macro PRINT_START] gcode: + + G21 ; mm Mode + G90 ; absolute mode + M140 S ; Heated bed control + M109 S + M83 ; Relative E G28 ; home all axes G32 ; level and clean PRIME_LINE @@ -718,7 +870,7 @@ gcode: G0 Z1.00 X20.0 Y20.0 F20000 ; move nozzle to remove stringing TURN_OFF_HEATERS ; turn off heaters M107 ; turn off fan - M141 S25 ; vent chamber setting fan to 25C + M141 S45 ; vent chamber setting fan to 45C G1 Z2 F3000 ; move nozzle up 2mm G90 ; absolute positioning G0 X55 Y300 F3600 ; park nozzle at brush bin @@ -830,8 +982,8 @@ gcode: # Reference POSITION_ENDSTOP Z Offset Settings ##################################################################### -# Energetic PEI Smooth Side = -1.100 -# Energetci PEI Textured Side = -1.170 +# Energetic PEI Smooth Side = -0.700 +# Energetci PEI Textured Side = -x.xxx #*# <---------------------- SAVE_CONFIG ----------------------> #*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated. @@ -849,4 +1001,4 @@ gcode: #*# pid_kd = 100.816 #*# #*# [stepper_z] -#*# position_endstop = -1.100 +#*# position_endstop = -0.700