diff --git a/printer_mods/README.md b/printer_mods/README.md
index 3d57b2d11..994913de6 100644
--- a/printer_mods/README.md
+++ b/printer_mods/README.md
@@ -57,6 +57,7 @@ like so:
 |BlueBear|[Deck Panel Backpack](./BlueBear/Deck_Panel_Backpack)|A mounting alternative if you don't want to drill your deck panel | :heavy_check_mark: | :x: | :x: |:x:|
 ||[Clippable Wago 221 Mounts](./BlueBear/Wago_221_mount)|Mounts for Wago 221 to screw or clip-in on 1515 extrusions | :heavy_check_mark: | :x: | :x: |
 ||[Ziptie Mount](./BlueBear/Ziptie_Mount)|Clippable Ziptie hooks for 1515 extrusions| :heavy_check_mark: | :x: | :x: |
+| bobbleheed | [Magnetic Panels](./bobbleheed/Magnetic_Panels) | Magnetic corner clips to allow for easy removal and install of panels | :x: | :grey_question: | :heavy_check_mark: | :x: |
 | btp | [Galileo chain mount (befenybay)](./btp/Galileo_Switchwire_Chain_Mount/README.md) | Modified chain mount position to cater for difference with Galileo Clockwork |:x:|:x:|:x:|:heavy_check_mark:|
 | buzzdalf | [v1.8/2.4 Afterburner connector cover for 42STH20-1004AS](./buzzdalf/connector_cover) | v1.8/2.4 Connector cover for 42STH20-1004AS | :x: | :heavy_check_mark: | :heavy_check_mark: |:grey_question:|
 ||[Ender 3 Switchwire Taller Z Mod](./buzzdalf/ender_switchwire_taller_z) | Taller Z Mod | :x: | :x: | :x: | :heavy_check_mark: |
diff --git a/printer_mods/bobbleheed/Magnetic_Panels/CAD/Magnetic_Panel_Corner_Clips_6mm.f3d b/printer_mods/bobbleheed/Magnetic_Panels/CAD/Magnetic_Panel_Corner_Clips_6mm.f3d
new file mode 100644
index 000000000..4b4794be5
Binary files /dev/null and b/printer_mods/bobbleheed/Magnetic_Panels/CAD/Magnetic_Panel_Corner_Clips_6mm.f3d differ
diff --git a/printer_mods/bobbleheed/Magnetic_Panels/IMAGES/Cap_Assembly.png b/printer_mods/bobbleheed/Magnetic_Panels/IMAGES/Cap_Assembly.png
new file mode 100644
index 000000000..aceda6b59
Binary files /dev/null and b/printer_mods/bobbleheed/Magnetic_Panels/IMAGES/Cap_Assembly.png differ
diff --git a/printer_mods/bobbleheed/Magnetic_Panels/IMAGES/Final_Assembly.png b/printer_mods/bobbleheed/Magnetic_Panels/IMAGES/Final_Assembly.png
new file mode 100644
index 000000000..0bf3a801d
Binary files /dev/null and b/printer_mods/bobbleheed/Magnetic_Panels/IMAGES/Final_Assembly.png differ
diff --git a/printer_mods/bobbleheed/Magnetic_Panels/IMAGES/Mount_Assembly.png b/printer_mods/bobbleheed/Magnetic_Panels/IMAGES/Mount_Assembly.png
new file mode 100644
index 000000000..7579dc07c
Binary files /dev/null and b/printer_mods/bobbleheed/Magnetic_Panels/IMAGES/Mount_Assembly.png differ
diff --git a/printer_mods/bobbleheed/Magnetic_Panels/README.md b/printer_mods/bobbleheed/Magnetic_Panels/README.md
new file mode 100644
index 000000000..a8c28557d
--- /dev/null
+++ b/printer_mods/bobbleheed/Magnetic_Panels/README.md
@@ -0,0 +1,37 @@
+# Magnetic Panels
+
+This mod allows for the easy removal of the panels on a V2, ideal for switching between ABS and PLA printing. This mod assumes a panel depth of 6mm, either from a 6mm panel or a 3mm panel + 3mm foam tape. It will not hold the panels against the frame without this thickness. 
+
+## BOM (for top and side panels)
+
+   | Material | Quantity |
+   |----------|----------|
+   | 6x3 Magnets | 72 |
+   | M3x8 SHCS | 24 |
+   | M3 Roll In or Hammerhead T Nuts | 24|
+   | VHB Tape | |   
+  
+  
+To reduce the number of magnets required, it is possible to install just two or even one per printed part. This has not been tested and the hold strength unknown.
+
+### Assembly
+
+#### Mount Assembly 
+
+![Magnetic Mount Assembly](./IMAGES/Mount_Assembly.png)
+
+Pressfit the magnets into the housing. Use the M3x8 SHCS and T Nuts to secure mounts to the frame. 
+
+It is easiest to install using the regular panel clips to hold the panel in position, this allows the mounts to be positioned with some clearance to the panel allowing smoother attachment of the system following installation. To make full use of this added convenience, fully complete installation of a single clip before repeating the procedure for the remainder on each panel.  
+<br>
+
+#### Cap Assembly
+
+![Magnetic Cap Assembly](./IMAGES/Cap_Assembly.png)
+
+Pressfit the magnets into the housing ensuring the poles are aligned between the mount and cap. Apply the triangular section of VHB tape and with the panel in position on the frame lower the magnet side into position before pressing the tape firmly against the panel. 
+<br>
+
+![Magnetic Mount Assembly](./IMAGES/Final_Assembly.png)
+
+The panel can now be pulled straight off the frame for removal, before being replaced with as much ease. 
diff --git a/printer_mods/bobbleheed/Magnetic_Panels/STL/Magnetic_Cap_6mm.stl b/printer_mods/bobbleheed/Magnetic_Panels/STL/Magnetic_Cap_6mm.stl
new file mode 100644
index 000000000..21ac126f9
Binary files /dev/null and b/printer_mods/bobbleheed/Magnetic_Panels/STL/Magnetic_Cap_6mm.stl differ
diff --git a/printer_mods/bobbleheed/Magnetic_Panels/STL/Magnetic_Mount_6mm.stl b/printer_mods/bobbleheed/Magnetic_Panels/STL/Magnetic_Mount_6mm.stl
new file mode 100644
index 000000000..7d4c526a7
Binary files /dev/null and b/printer_mods/bobbleheed/Magnetic_Panels/STL/Magnetic_Mount_6mm.stl differ