VoronUsers CI Update (#969)
This commit is contained in:
Florian Heilmann
GitHub
parent
dbe9f29078
commit
20af93de95
|
|
@ -1,57 +1,73 @@
|
|||
<!--
|
||||
Thank you for your interest in contributing to the VoronUsers repository, it is
|
||||
highly appreciated!
|
||||
|
||||
**Please make sure the submission conforms to the rules outlined below. PRs which fail
|
||||
to conform to the rules below are likely to be rejected.**
|
||||
-->
|
||||
|
||||
<!--
|
||||
Describe the submission further using the template provided below. The more
|
||||
details the better! Please don't forget to thoroughly read the mod requirements and rules below
|
||||
and make sure your mod submission adheres to these rules.
|
||||
Doing so speeds up the review process and will increase your chances at acceptance.
|
||||
-->
|
||||
|
||||
### Which mods/configurations/profiles are added by this PR?
|
||||
|
||||
### How was it tested?
|
||||
|
||||
### Any background context you want to provide?
|
||||
|
||||
### Screenshots (if appropriate)
|
||||
|
||||
### ⚠️⚠️**PLEASE CAREFULLY READ AND APPLY THE RULES BELOW**⚠️⚠️
|
||||
|
||||
* [ ] The mod, firmware configuration or slicer profile is in the correct category
|
||||
folder. Printable mods go to `printer_mods/`, firmware configurations
|
||||
go to `firmware_configurations/`, slicer profiles go to `slicer_profiles/`.
|
||||
Create a subfolder with your name, and place the mods in a subfolder with
|
||||
a descriptive name within that folder, e.g.: `/printer_mods/FHeilmann/flux_capacitor`
|
||||
a descriptive name within that folder, e.g.: `/printer_mods/FHeilmann/flux_capacitor`.
|
||||
* [ ] Folder and file naming:
|
||||
* Folders and filenames shouldn't contain spaces. Only letters `a-zA-Z`, numbers `0-9`, underscores `_`, hyphens `-` and periods `.`
|
||||
* Primary color: `part_xyz.stl`
|
||||
* Accent color: `[a]_part_xyz.stl`
|
||||
* Opaque color (Blocks light): `[o]_part_xyz.stl`
|
||||
* Clear/transparent color (Allows light): `[c]_part_xyz.stl`
|
||||
* Quantity, if more than one is needed: `part_xyz_x4.stl`
|
||||
* Folders and filenames MUST NOT contain spaces. Only letters `a-zA-Z`, numbers `0-9`, underscores `_`, hyphens `-` and periods `.`
|
||||
* You may use the following filenames to indicate the color and quantity of your prints:
|
||||
* Primary color: `part_xyz.stl`
|
||||
* Accent color: `[a]_part_xyz.stl`
|
||||
* Opaque color (Blocks light): `[o]_part_xyz.stl`
|
||||
* Clear/transparent color (Allows light): `[c]_part_xyz.stl`
|
||||
* Quantity, if more than one is needed: `part_xyz_x4.stl`
|
||||
* [ ] Each mod folder must contain a `.metadata.yml` file with information about the mod.
|
||||
Refer to the following template for the required and optional contents:
|
||||
```yaml
|
||||
---
|
||||
title: Mod Title # required
|
||||
description: "This mod does awesome things with awesome printers!" # required
|
||||
mod_version: 1 # required
|
||||
printer_compatibility: # required, one or more of the options listed below
|
||||
- V0
|
||||
- V1
|
||||
- V2
|
||||
- VSW
|
||||
- Trident
|
||||
- Legacy
|
||||
cad: # required: At least 1 CAD file for your mod, path relative to your mod folder
|
||||
- CAD/my_step_file_1.step
|
||||
- CAD/my_f360_file_1.f360
|
||||
images: # optional, image files provided with your mod, path relative to your mod folder
|
||||
- images/mods_site_card_image.png
|
||||
- images/side_view.png
|
||||
- images/install_guide.png
|
||||
discord_username: discord_person # optional, your discord username
|
||||
```
|
||||
* [ ] For each mod, add a small `README.md` file to its folder with a short description
|
||||
of what the mod accomplishes. This readme can be used to add pictures, give assembly
|
||||
instructions or specify a bill of materials if the mod requires additional hardware.
|
||||
* [ ] The PR modifies the top-level `README.md` of the category folder adding the
|
||||
contribution to the table. Read the top part of the file for instructions on how
|
||||
to do this. Please preserve the alphabetical ordering while adding new rows. Make sure
|
||||
to fill out the compatibility matrix to indicate which versions of the Voron printer
|
||||
the submission is compatible with.
|
||||
* [ ] The mod/configuration/profile has been tested by the person submitting the mod
|
||||
and/or other Voron users. Make sure to add information about how the mod was tested below.
|
||||
* [ ] The mod is not merely a slight modification of an official Voron part, configuration
|
||||
or profile (i.e. an official Voron part with a few mm added or removed or a slicer profile
|
||||
which only modifies a few values). *(When in doubt, contact one of the admins in the
|
||||
* [ ] The mod/configuration/profile has been **TESTED** by the person submitting the mod
|
||||
and/or other Voron users. Make sure to add information about how the mod was tested below.
|
||||
* [ ] The mod is **NOT** merely a slight modification of an official Voron part, configuration
|
||||
or profile (i.e. an official Voron part with a few mm added or removed or a slicer profile
|
||||
which only modifies a few values). *(When in doubt, contact one of the admins in the
|
||||
Voron discord before submitting the PR)*
|
||||
* [ ] Submitted STLs are printable without support. *(If the mod does not meet this criterion
|
||||
join the Voron discord and ask the other users for advice on how to modify the mod such
|
||||
that it does not require supports)*
|
||||
* [ ] Submitted STL files are not corrupt. *(This can be tested by opening the STL in PrusaSlicer
|
||||
* [ ] Submitted STLs are **printable without support and oriented properly**. If supports can't be avoided,
|
||||
the model must include break-away supports.
|
||||
* [ ] Submitted STL files are **not corrupt**. *(This can be tested by opening the STL in PrusaSlicer
|
||||
and checking if mesh errors are reported.)*
|
||||
* [ ] Submitted STL files are oriented and scaled properly for printing.
|
||||
* [ ] Submission includes a CAD file in the form of a `.STEP` or `.SCAD` file
|
||||
* [ ] Submitted firmware configs or slicer profiles contain no sensitive data (e.g. API keys).
|
||||
|
||||
<!--
|
||||
Describe the submission further using the template provided below. The more
|
||||
details the better!
|
||||
-->
|
||||
|
||||
#### Which mods/configurations/profiles are added by this PR?
|
||||
|
||||
#### How was it tested?
|
||||
|
||||
#### Any background context you want to provide?
|
||||
|
||||
#### Screenshots (if appropriate)
|
||||
|
||||
#### Further notes
|
||||
* [ ] Submissions **must** include a CAD file in the form of a `.STEP`, `.F360` or `.SCAD` file
|
||||
* [ ] Submitted firmware configs or slicer profiles **contain no sensitive data** (e.g. API keys).
|
||||
|
|
@ -1,48 +0,0 @@
|
|||
name: Voron CI
|
||||
|
||||
on:
|
||||
push:
|
||||
branches: [ master ]
|
||||
pull_request:
|
||||
branches: [ master ]
|
||||
|
||||
jobs:
|
||||
build:
|
||||
|
||||
runs-on: ubuntu-latest
|
||||
|
||||
strategy:
|
||||
matrix:
|
||||
node-version: [14.x]
|
||||
env:
|
||||
GIT_BRANCH: ${{ github.head_ref }}
|
||||
GIT_PR_BASE_BRANCH: ${{ github.base_ref }}
|
||||
GIT_PULL_REQUEST: ${{ github.event.number }}
|
||||
steps:
|
||||
- name: Checkout Actions
|
||||
uses: actions/checkout@v3
|
||||
|
||||
- name: Cache Folder
|
||||
id: cache-folder
|
||||
uses: actions/cache@v3
|
||||
with:
|
||||
path: ci_cache
|
||||
key: voron-ci
|
||||
# - name: Set ENV variable
|
||||
# run: echo "::set-env name=GIT_BRANCH::${GIT_BRANCH:-$(echo $GITHUB_REF | awk 'BEGIN { FS = "/" } ; { print $3 }')}"
|
||||
- name: Print Travis ENV vars
|
||||
run: |
|
||||
echo "GIT_BRANCH: ${GIT_BRANCH}"
|
||||
echo "GIT_PULL_REQUEST: ${GIT_PULL_REQUEST}"
|
||||
- name: Setup NPM
|
||||
uses: actions/setup-node@v3
|
||||
with:
|
||||
node-version: ${{ matrix.node-version }}
|
||||
- name: Install NPM scripts
|
||||
run: |
|
||||
npm init -y
|
||||
npm install --global remark-cli remark-validate-links
|
||||
- name: Execute CI
|
||||
run: |
|
||||
git clone https://github.com/VoronDesign/GithubScripts.git .github_scripts
|
||||
/bin/bash ./.github_scripts/workflows/ci-build.sh
|
||||
|
|
@ -0,0 +1,85 @@
|
|||
name: VoronUsers PR CI
|
||||
run-name: "#${{github.event.number}} - ${{github.event.pull_request.title}}"
|
||||
on:
|
||||
pull_request:
|
||||
types: [opened, reopened, synchronize]
|
||||
concurrency:
|
||||
group: ${{ github.ref }}
|
||||
cancel-in-progress: true
|
||||
permissions:
|
||||
pull-requests: write
|
||||
jobs:
|
||||
checkout_check_whitespace:
|
||||
name: Checkout & Check Whitespace
|
||||
uses: VoronDesign/.github/.github/workflows/pr_checkout_check_whitespace_cache.yml@v2
|
||||
with:
|
||||
branch: ${{ github.ref }}
|
||||
cache-key: file-cache-${{github.sha}}
|
||||
cache-directory: pr-files
|
||||
setup_python:
|
||||
needs: [checkout_check_whitespace]
|
||||
name: Prepare python environment
|
||||
if: ${{ needs.checkout_check_whitespace.outputs.stl == 'true' }}
|
||||
uses: VoronDesign/.github/.github/workflows/prepare-environment.yml@v2
|
||||
with:
|
||||
apt-packages: "admesh, libadmesh-dev"
|
||||
pip-packages: "admesh imagekitio git+https://github.com/ChristophSchranz/Tweaker-3.git"
|
||||
python-cache-key: voronusers-python-cache
|
||||
check_stls:
|
||||
name: Check STL corruption
|
||||
needs: [setup_python]
|
||||
if: ${{ needs.checkout_check_whitespace.outputs.stl == 'true' }}
|
||||
uses: VoronDesign/.github/.github/workflows/check-stl-corruption.yml@v2
|
||||
with:
|
||||
cache-key: file-cache-${{github.sha}}
|
||||
cache-directory: pr-files
|
||||
python-cache-key: voronusers-python-cache
|
||||
check_stl_rotation:
|
||||
name: Check STL rotation
|
||||
needs: [setup_python]
|
||||
if: ${{ needs.checkout_check_whitespace.outputs.stl == 'true' }}
|
||||
uses: VoronDesign/.github/.github/workflows/check-stl-rotation.yml@v2
|
||||
secrets:
|
||||
# ToDo: Change to secrets: inherit once it's in the VoronDesign org
|
||||
IMAGEKIT_PRIVATE_KEY: ${{ secrets.IMAGEKIT_PRIVATE_KEY }}
|
||||
IMAGEKIT_PUBLIC_KEY: ${{ secrets.IMAGEKIT_PUBLIC_KEY }}
|
||||
with:
|
||||
imagekit-url-endpoint: https://ik.imagekit.io/vorondesign
|
||||
cache-key: file-cache-${{github.sha}}
|
||||
cache-directory: pr-files
|
||||
python-cache-key: voronusers-python-cache
|
||||
validate_metadata:
|
||||
name: Check metadata files
|
||||
needs: [checkout_check_whitespace]
|
||||
if: ${{ needs.checkout_check_whitespace.outputs.yaml == 'true' }}
|
||||
uses: VoronDesign/.github/.github/workflows/validate-metadata-files.yml@v2
|
||||
with:
|
||||
cache-key: file-cache-${{github.sha}}
|
||||
cache-directory: pr-files
|
||||
preview_readme:
|
||||
name: Preview README.md
|
||||
needs: [validate_metadata]
|
||||
uses: VoronDesign/.github/.github/workflows/preview-readme.yml@v2
|
||||
with:
|
||||
subdirectory: printer_mods
|
||||
cache-key: file-cache-${{github.sha}}
|
||||
cache-directory: pr-files
|
||||
create_pro_comment:
|
||||
name: Create PR comment
|
||||
needs: [checkout_check_whitespace, check_stls, check_stl_rotation, validate_metadata, preview_readme]
|
||||
if: ${{ always() }}
|
||||
uses: VoronDesign/.github/.github/workflows/generate-pr-comment.yml@v2
|
||||
with:
|
||||
repository: ${{ github.repository }}
|
||||
action_run_id: ${{ github.run_id }}
|
||||
|
||||
|
||||
# check_files:
|
||||
# name: Check files
|
||||
# needs: [validate_metadata]
|
||||
# uses: VoronDesign/.github/.github/workflows/validate_files.yml@v1
|
||||
# with:
|
||||
# subdirectory: printer_mods
|
||||
# cache-key: file-cache-${{github.sha}}
|
||||
# cache-directory: pr-files
|
||||
# python-cache-key: voronusers-python-cache
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
name: VoronUsers Push Main CI
|
||||
on:
|
||||
push:
|
||||
branches:
|
||||
- 'master'
|
||||
jobs:
|
||||
setup_python:
|
||||
name: Rebuild repo caches
|
||||
uses: VoronDesign/.github/.github/workflows/prepare-environment.yml@v1
|
||||
with:
|
||||
apt-packages: "admesh, libadmesh-dev"
|
||||
pip-packages: "admesh pyyaml imagekitio git+https://github.com/ChristophSchranz/Tweaker-3.git"
|
||||
python-cache-key: voronusers-python-cache
|
||||
preview_readme:
|
||||
name: Generate README
|
||||
uses: VoronDesign/.github/.github/workflows/generate-readme.yml@v1
|
||||
with:
|
||||
subdirectory: printer_mods
|
||||
commit_msg: "Generate VoronUsers printer_mods README.md [skip ci]"
|
||||
commit_user: Voron-GitHub-Bot
|
||||
commit_email: github@vorondesign.com
|
||||
secrets:
|
||||
VORON_BOT_GITHUB_PAT: ${{ secrets.VORON_BOT_GITHUB_PAT }}
|
||||
|
||||
|
|
@ -0,0 +1,20 @@
|
|||
cad:
|
||||
- CAD/handle.FCStd
|
||||
- CAD/handle.step
|
||||
description: Handle for Voron 2.4
|
||||
images:
|
||||
- images/extrusion_with_inner_part_mounted.jpg
|
||||
- images/extrusion_with_handle.jpg
|
||||
- images/handle.jpg
|
||||
- images/handle_rendering.jpg
|
||||
- images/extrusion_with_all_handle_parts.jpg
|
||||
- images/extrusion_with_tnuts.jpg
|
||||
- images/nuts_and_bolts.jpg
|
||||
- images/handle_inner_part.jpg
|
||||
- images/handle_middle_part.jpg
|
||||
- images/handle_outer_part.jpg
|
||||
- images/inner_part_with_heat_set_inserts.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: V2.4 handle
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
cad:
|
||||
- CAD/exhaust_housing_side_entry.f3d
|
||||
description: Exhaust housing with dual cover screws and single or dual side entry
|
||||
filament paths.
|
||||
images:
|
||||
- images/side_housing_view1.png
|
||||
- images/side_housing_view2.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V1.8
|
||||
- V2.4
|
||||
- VT
|
||||
title: Side entry exhaust housing
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
cad:
|
||||
- STEP/huvud_chain_mount_3_hole.step
|
||||
- STEP/huvud_chain_mount_2_hole.step
|
||||
description: Huvud rear mount for Clockwork or LGX that supports a cable chain.
|
||||
images:
|
||||
- images/huvud_chain_mount.png
|
||||
- images/huvud_mount_install2.png
|
||||
- images/huvud_mount_install1.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V1.8
|
||||
- VT
|
||||
title: Huvud Chain Mount
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
cad:
|
||||
- fannypack_zero.step
|
||||
description: Electronics cooling solution for Voron Zero
|
||||
images:
|
||||
- Installed.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
- VSW
|
||||
- VT
|
||||
title: FANnypack zero
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
cad:
|
||||
- thermistor_holder_zero.step
|
||||
description: Extended thermistor holder for Voron Zero
|
||||
images:
|
||||
- thermistor_holder_comparison.png
|
||||
- installed.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
- VSW
|
||||
- VT
|
||||
title: Thermistor holder zero
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
cad: []
|
||||
description: Skirt with Access Holes from the bottom
|
||||
images:
|
||||
- CAD.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: V0.1_Skirt_Holes
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
cad: []
|
||||
description: Skirt with C14 inlet + New feet to screw into
|
||||
images:
|
||||
- CAD.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: V0.1_Skirt_Inlet
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
cad: []
|
||||
description: AngryLED - LED-mount for Lumentech LT3 profiles.
|
||||
images:
|
||||
- AngryLED_v1_1.png
|
||||
- AngryLED_v1_3.png
|
||||
- AngryLED_v1_2.png
|
||||
- led_mount_v01_2.png
|
||||
- led_mount_v01_1.png
|
||||
- AngryLED_small_v1.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: LED mount
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad: []
|
||||
description: Corner panel clip with an internal cable path.
|
||||
images:
|
||||
- corner_panel_clip_cp.png
|
||||
- corner_panel_clip_cp2.png
|
||||
- corner_panel_clip_cp.gif
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Corner panel clip w. cable
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
cad: []
|
||||
description: Exhaust filter housing with the G1-8 "thread on the side.
|
||||
images:
|
||||
- efh_s_2.png
|
||||
- efh_s_1.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Exhaust filter housing - side thread
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad: []
|
||||
description: relay-mount for 2x 2 channel relay modules.
|
||||
images:
|
||||
- relay_mount_printed.jpeg
|
||||
- relay_mount2.png
|
||||
- relay_mount1.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: relay mount
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
cad:
|
||||
- cad/cable_routing_z_belt_cover_a_mod.step
|
||||
- cad/cable_routing_z_belt_cover_b_mod.step
|
||||
description: Z belt covers that allow hidden cable routing.
|
||||
images:
|
||||
- img/cable_routing_z_belt_cover_mod_img_0.png
|
||||
- img/cable_routing_z_belt_cover_mod_img_1.png
|
||||
- img/cable_routing_z_belt_cover_mod_img_3.jpg
|
||||
- img/cable_routing_z_belt_cover_mod_img_2.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Hidden cable routing z belt cover
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
cad:
|
||||
- CAD/270-Clamping-Hinge.f3d
|
||||
- CAD/270-Clamping-Hinge.step
|
||||
description: Simple 270 degree hinges that clamp to the front panels instead of using
|
||||
VHB or drilled holes
|
||||
images:
|
||||
- Images/270-Clamping-Hinges-Assembly.gif
|
||||
- Images/IMG_0310.png
|
||||
- Images/Logo-Variation-2.png
|
||||
- Images/Logo-Variation-0.png
|
||||
- Images/Logo-Variation-1.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: 270 Clamping Hinges
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
cad:
|
||||
- CAD/MiniAB_ADXL_Mount.f3d
|
||||
description: Mount for an AXDL345 on the Mini Afterburner
|
||||
images:
|
||||
- Images/CAD_1.png
|
||||
- Images/CAD_3.png
|
||||
- Images/CAD_2.png
|
||||
- Images/PIC_1.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Mini Afterburner ADXL345 Mount
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
cad:
|
||||
- CAD/Mini_Afterburner_Strain_Relief.f3d
|
||||
description: A replacement strain relief for the Mini Afterburner toolhead
|
||||
images:
|
||||
- Images/CAD_1.png
|
||||
- Images/CAD_3.png
|
||||
- Images/CAD_2.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Mini Afterburner Strain Relief
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad:
|
||||
- CAD/Trident_Revo_Nozzle_Skirt.step
|
||||
description: A Revo nozzle box hidden in a Trident skirt.
|
||||
images:
|
||||
- Images/Photo-Closed.jpg
|
||||
- Images/Photo-Opened.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- VT
|
||||
title: Revo Nozzle Skirt
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
cad:
|
||||
- CAD/V0_Neopixel_Front_Bed_Mount.f3d
|
||||
description: A replacement Front Bed Mount with room for a neopixel or dotstar behind
|
||||
the logo
|
||||
images:
|
||||
- Images/CAD_1.png
|
||||
- Images/CAD_2.png
|
||||
- Images/PIC_2.jpg
|
||||
- Images/PIC_1.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: V0 Neopixel Front Bed Mount
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
cad: []
|
||||
description: This Mod is a simple "One Piece" mount for the popular Electreeks Camera.
|
||||
images:
|
||||
- Pictures/Picture1.jpeg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Mount for Electreeks Camera
|
||||
|
|
@ -0,0 +1,20 @@
|
|||
cad:
|
||||
- AB-BN-30_Assy.f3d
|
||||
- AB_BN_30.step
|
||||
description: Improved Afterburner with 5015 fan
|
||||
images:
|
||||
- fans_wires.png
|
||||
- wirestorage.png
|
||||
- ModifiedFan.png
|
||||
- overview.png
|
||||
- AB-BN-28.png
|
||||
- RapidoStickout.png
|
||||
- fanspacer.png
|
||||
- fanspring.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V1.8
|
||||
- V2.4
|
||||
- VSW
|
||||
- VT
|
||||
title: AB-BN Afterburner mod (5015)
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
cad:
|
||||
- CAD/Dragon_AB_4020_1.step
|
||||
- CAD/Rapido_AB_4020_2.step
|
||||
- CAD/RevoVoron_AB_4020.step
|
||||
description: Improved Dragon and Rapido toolhead for stock Afterburner with 4020 fan
|
||||
images: []
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V1.8
|
||||
- V2.4
|
||||
- VSW
|
||||
- VT
|
||||
title: AB-BN for Stock Afterburner (4020)
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
cad: []
|
||||
description: Changes the gearing for the AB drives to improve both resolution and
|
||||
torque, with a strenthened frame.
|
||||
images:
|
||||
- ABcloseup.jpg
|
||||
- reduction_overview.jpg
|
||||
- reduction.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Precision AB Drive
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
cad: []
|
||||
description: Tools and procedure to properly align the rails in 2.4 and Afterburner
|
||||
images:
|
||||
- pivot_front.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Rail Alignment
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
cad:
|
||||
- CAD/LoudOwl_v16.f3d
|
||||
- CAD/LoudOwl_v16.step
|
||||
- CAD/LoudOwl_for_split_ABBN_untested.step
|
||||
description: Alternative dual 5015 part cooling fan toolhead for Afterburner
|
||||
images:
|
||||
- Visual/Supp_removal.jpg
|
||||
- Visual/LoudOWL.jpg
|
||||
- Visual/Wiring.jpg
|
||||
- Visual/comparison.jpg
|
||||
- Visual/Fans_in_place.jpg
|
||||
- Visual/LoudOwl_2.jpg
|
||||
- Visual/Using_cut_tool_3.jpg
|
||||
- Visual/Using_cut_tool_2.jpg
|
||||
- Visual/Using_cut_tool_1.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V1.8
|
||||
- V2.4
|
||||
- VSW
|
||||
title: LoudOwl aka Stabby
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad: []
|
||||
description: A better supported Spool Holder that mounts to a modified corner panel.
|
||||
images:
|
||||
- IMG/Cornerpanel_Spoolholder.png
|
||||
- IMG/Extrude_This.png
|
||||
- IMG/IRL.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: CornerPanel_SpoolHolder
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
cad: []
|
||||
description: Based on the stock holder but mounts to the horizontal extrusions.
|
||||
images:
|
||||
- img/Holder-with-spool.jpg
|
||||
- img/Holder.png
|
||||
- img/Holder_1.png
|
||||
- img/Holder-Real.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Horizontal Spool Holder
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
cad: []
|
||||
description: Microswitch pod with JST-XH 4-pin connector
|
||||
images:
|
||||
- img/assembly.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Microswitch Pod With Connector
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
cad: []
|
||||
description: DIN rail mount for an extra LRS-100 Power Supply
|
||||
images: []
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V1.8
|
||||
- V2.4
|
||||
- VT
|
||||
title: LRS-100 DIN mount
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
cad:
|
||||
- Deck_Panel_Backpack.f3d
|
||||
- Deck_Panel_Backpack.step
|
||||
description: A mounting alternative if you don't want to drill your deck panel
|
||||
images:
|
||||
- images/image01.jpg
|
||||
- images/image02.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Deck Panel Backpack
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
cad:
|
||||
- WAGO_221-412_5x2-mount.step
|
||||
- WAGO_221-412_3x2-mount_screw.step
|
||||
- WAGO_221-412_3x2-mount.step
|
||||
- WAGO_221-413_3x3-mount-screw.step
|
||||
- 1515_SnapIn_Makerbeam.step
|
||||
- 1515_SnapIn_LDO.step
|
||||
description: Mounts for Wago 221 to screw or clip-in on 1515 extrusions
|
||||
images:
|
||||
- images/PrintOrientation.jpg
|
||||
- images/ScrewMountUsage.jpg
|
||||
- images/picSnapMount3piece.jpg
|
||||
- images/Mounting.jpg
|
||||
- images/picSnapMount5piece.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Clippable Wago 221 Mounts
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
cad:
|
||||
- 1515_SnapIn_ZipTie_Makerbeam.step
|
||||
- 1515_SnapIn_ZipTie_LDO.step
|
||||
description: Clippable Ziptie hooks for 1515 extrusions
|
||||
images:
|
||||
- images/image01.jpg
|
||||
- images/image03.jpg
|
||||
- images/image02.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Ziptie Mount
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
cad:
|
||||
- cad/2020-Wago_221-412_tray-5x2.step
|
||||
description: Smaller 5 port Wago mount that fits parallel to the support rails
|
||||
images:
|
||||
- images/5x2_front_view.png
|
||||
- images/5x2_back_view.png
|
||||
- images/Installed_Older_Version.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Wago mount
|
||||
|
|
@ -0,0 +1,20 @@
|
|||
cad:
|
||||
- CAD/Mini-After-LGX-lite.step
|
||||
- CAD/Z_Bed_adjustable_Y_offset.step
|
||||
description: LGX Lite Toolhead Setup For Voron V0.1.
|
||||
images:
|
||||
- Images/PTFE-Cutting-Jig.jpg
|
||||
- Images/Hotend-Mount-Mosquito-3010-Fan.png
|
||||
- Images/mini-after-lgx-lite_header-1200x628.jpg
|
||||
- Images/Cowling-Universal.png
|
||||
- Images/Hotend-Mount-Copperhead-Screw-Mount-3007-Fan.png
|
||||
- Images/Hotend-Mount-DRAGON-3007-Fan.png
|
||||
- Images/Hotend-Mount-DRAGONFLY-3007-Fan.png
|
||||
- Images/X-Carriage.png
|
||||
- Images/Hotend-Mount-MOSQUITO-3007-Fan.png
|
||||
- Images/Hotend-Mount-DRAGONFLY-3010-Fan.png
|
||||
- Images/Hotend-Mount-Copperhead-Screw-Mount-3010-Fan.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Mini-After-LGX-Lite
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad:
|
||||
- relay_bracket.step
|
||||
description: DIN Rail mounting bracket for an 2-Channel-Relay
|
||||
images:
|
||||
- relay_bracket_2.jpg
|
||||
- relay_bracket_1.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: 2-Channel Relay DIN Rail Bracket
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
cad:
|
||||
- ESP32_bracket.step
|
||||
description: DIN rail mounting bracket for an ESP32
|
||||
images:
|
||||
- esp32_bracket.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: ESP32 DIN Rail Bracket
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
cad:
|
||||
- CAD/PITFT50_45_degree_mount.f3d
|
||||
- CAD/PITFT50_45_degree_mount.step
|
||||
description: Mount that puts the screen at a 45-degree angle for more vertical clearance
|
||||
images:
|
||||
- Images/side-view.jpeg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
- VT
|
||||
title: PITFT50 45-degree mount
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad:
|
||||
- CAD/5015_Bed_Fan_Mount_Trident.step
|
||||
- CAD/5015_Bed_Fan_Mount_Trident.f3d
|
||||
description: Bed fans for Trident
|
||||
images:
|
||||
- Images/trident_bed_fans.jpeg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- VT
|
||||
title: Trident Bed Fans
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad: []
|
||||
description: Simple and slim handles for the V0
|
||||
images:
|
||||
- Screenshot1.png
|
||||
- Screenshot2.png
|
||||
- Screenshot3.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: V0 Handles Slim
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad:
|
||||
- CAD/Tool_free_tensioner.STEP
|
||||
description: Tool-free tensioner for Z-Axis
|
||||
images:
|
||||
- Images/Tool_free_tensioner_1.png
|
||||
- Images/Tool_free_tensioner_2.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Tool_free_tensioner
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad: []
|
||||
description: Simple clip to keep extra Z belts clean and away from panels
|
||||
images:
|
||||
- imgs/IMG_3019.jpg
|
||||
- imgs/IMG_3018.jpg
|
||||
- imgs/IMG_3020.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Z Belt Clip
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
cad: []
|
||||
description: Modified version of Trident RPi bracket to fit the smaller RPi Zero
|
||||
images:
|
||||
- image/Rendering.JPG
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
- V1.8
|
||||
- V2.4
|
||||
- VT
|
||||
title: Raspberry Pi Zero Bracket
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad: []
|
||||
description: A modified plug panel for the Power Entry Connector Schaffner FN286-10-06
|
||||
with two integreated Keystone sockets.
|
||||
images:
|
||||
- IMG_20201201_164639.jpg
|
||||
- IMG_20201201_164633.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Plug Panel Mod for Schaffner FN286-10-06
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad: []
|
||||
description: Voron 0.1 Mounting brackets with/without RPi 4
|
||||
images:
|
||||
- Voron_V0_Duet_2_Wifi_Bracket_v14.png
|
||||
- Duet2WifiMountingBracket.jpg
|
||||
- Voron_V0_Duet_2_Wifi_Bracket_with_RPi_v14.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: V0.1 Duet 2 Wifi mounting brackets
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad: []
|
||||
description: Voron V0 Mean Well power supply bracket (Funssor Kit)
|
||||
images:
|
||||
- Voron_V0_MW_PS_Bracket_v7_2.png
|
||||
- Voron_V0_MW_PS_Bracket_v7_1.png
|
||||
- Voron_V0_MW_PS_Bracket.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Voron V0 Mean Well power supply bracket (Funssor Kit)
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
cad: []
|
||||
description: Voron V0 SSR Mount for the bottom
|
||||
images:
|
||||
- Voron_V0_SSR_Mount_v5_Back.png
|
||||
- Voron_V0_SSR_Mount_Install_Step_1.jpg
|
||||
- Voron_V0_SSR_Mount_Install_Step_2.jpg
|
||||
- Voron_V0_SSR_Mount_Install_Step_3.jpg
|
||||
- Voron_V0_SSR_Mount_v5_Front.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Voron V0 SSR Mount
|
||||
|
|
@ -0,0 +1,14 @@
|
|||
cad: []
|
||||
description: Activated charcoal exhaust filter with HEPA that replaces the rear tophat
|
||||
panel
|
||||
images:
|
||||
- Github_Images/Front_View.jpg
|
||||
- Github_Images/Side_View.jpg
|
||||
- Github_Images/Top_View.jpg
|
||||
- Github_Images/Exploded_Final_Labeled.jpg
|
||||
- Github_Images/Tophat_Install.jpg
|
||||
- Github_Images/Asm_Front_View.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Tophat Exhaust Filter V0
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
cad: []
|
||||
description: An alternative Din rail mount for BTT Octopus (PRO) boards
|
||||
images:
|
||||
- img/IMG-20210610-WA0001.jpg
|
||||
- img/simple_bracket_STL.jpg
|
||||
- img/octopus.svg
|
||||
- img/octopus_inverted.svg
|
||||
- img/STL.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V1.8
|
||||
- V2.4
|
||||
- VSW
|
||||
- VT
|
||||
title: The Cephalopod limb (BTT Octopus PRO Bracket(s))
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
cad:
|
||||
- V0_skirts_onepart.step
|
||||
description: One part Skirts for the V0
|
||||
images: []
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: V0 one-part Skirts
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
cad:
|
||||
- CAD/Revo_Nozzle_v12.step
|
||||
description: A skirt case for the Revo hotends to reside R1 and R2
|
||||
images:
|
||||
- Images/Finished_Open.jpg
|
||||
- Images/Finished_Closed.jpg
|
||||
- Images/Completed.png
|
||||
- Images/AllSizes.png
|
||||
- Images/Open.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Revo hotend skirt case
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad: []
|
||||
description: Simple bracket to mount an LED strip
|
||||
images:
|
||||
- Images/LED_Holder_Picture.jpg
|
||||
- Images/LED_Holder_ISO.png
|
||||
- Images/LED_Strip_Example.jpg
|
||||
- Images/LED_Holder_Side_View.png
|
||||
mod_version: 1
|
||||
printer_compatibility: []
|
||||
title: LED Strip Holder
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad: []
|
||||
description: Moves power switch to right front skirt on the Trident
|
||||
images:
|
||||
- Images/Front_View.png
|
||||
- Images/Filter_Front_View.png
|
||||
- Images/ISO_View.png
|
||||
- Images/Filter_ISO_View.png
|
||||
mod_version: 1
|
||||
printer_compatibility: []
|
||||
title: Trident Right Skirt Switch
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
cad: []
|
||||
description: V0.1 Block Style Handle
|
||||
images:
|
||||
- images/125217883-bf24e900-e28f-11eb-97ca-68b314f65b5d.jpg
|
||||
- images/125217901-c4823380-e28f-11eb-9288-839585f50953.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: V0.1 Block Handle
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
cad: []
|
||||
description: V2.4 Duet 3 3HC Din Bracket
|
||||
images: []
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Duet 3 3HC Din Bracket
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
cad: []
|
||||
description: V2.4 Duet 3 6HC Din Bracket
|
||||
images:
|
||||
- Example_print-courtesy_of_medicusdkfz.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Duet 3 6HC Din Bracket
|
||||
|
|
@ -0,0 +1,22 @@
|
|||
cad:
|
||||
- CAD/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_left_rev01.f3d
|
||||
- CAD/LDO_LED_PCB_spacer_narrow_rev01.f3d
|
||||
- CAD/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_left_rev01.step
|
||||
- CAD/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_right_rev01.step
|
||||
- CAD/LDO_LED_PCB_spacer_narrow_rev01.step
|
||||
- CAD/top_corner_cable_cover_with_drop_holes_rev02.step
|
||||
- CAD/top_corner_cable_cover_with_drop_holes_rev02.f3d
|
||||
- CAD/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_right_rev01.f3d
|
||||
description: Corner cable cover around Z-idler with drop holes near z frame and cutouts
|
||||
for inline wiring from 2020 extrustions
|
||||
images:
|
||||
- Images/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_left_right_installed.JPG
|
||||
- Images/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_right.JPG
|
||||
- Images/top_corner_cable_cover_with_drop_holes_installed.JPG
|
||||
- Images/top_corner_cable_cover_with_drop_holes_front.JPG
|
||||
- Images/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_left.JPG
|
||||
- Images/top_corner_cable_cover_with_drop_holes_bottom.JPG
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Corner Cable Cover with Drop Holes
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
cad: []
|
||||
description: Printed panels for the Voron Zero
|
||||
images:
|
||||
- images/db.png
|
||||
- images/ghettopanels.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Ghetto Panels
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad: []
|
||||
description: New hinge to easily remove the door and have a wide opening V2.x
|
||||
images:
|
||||
- Images/MMU.jpg
|
||||
- Images/Charniere_Av.jpg
|
||||
- Images/Charniere_Ar.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Removable Doors
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
cad:
|
||||
- CAD/U2C_Mounting_Universal.STEP
|
||||
description: Bigtreetech U2C CAN Interface mounting bracket
|
||||
images:
|
||||
- Images/U2C_Mounted.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
- V1.8
|
||||
- V2.4
|
||||
- VT
|
||||
title: U2C Mounting
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
cad:
|
||||
- CAD/15x15_Drag_Chain_End.f3d
|
||||
description: 15x15 drag chain end piece
|
||||
images:
|
||||
- Images/Image.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: 15x15 Drag Chain End
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
cad:
|
||||
- CAD/Retractor Mount Straight.f3d
|
||||
- CAD/Retractor Mount Slanted.f3d
|
||||
description: Extrusion mount for badge retractor to keep bowden tube out of the way.
|
||||
images:
|
||||
- Images/Image.jpg
|
||||
- Images/Example.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Badge Retractor Mount
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
cad:
|
||||
- 5015_Bed_Fan_Mount/5015_Bed_Fan_Mount.step
|
||||
description: Bed fan control macros and 5015 bed fan mounts
|
||||
images:
|
||||
- Images/5015_mount_isolated.png
|
||||
- Images/5015_triple.png
|
||||
- Images/5015_quad.png
|
||||
- Images/5015_quad_installed.png
|
||||
- Images/5015_dual.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Bed Fans
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad:
|
||||
- CAD/Short_Z_Joints.step
|
||||
description: Shorter Z joints for the v2.4
|
||||
images:
|
||||
- Images/Side-By-Side.png
|
||||
- Images/Side-By-Side-Cross-Section.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Short Z Joints
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
cad:
|
||||
- CAD/Single_MGN9H_Carriage_CW2.f3d
|
||||
- CAD/Single_MGN9H_Carriage_CW1.f3d
|
||||
- CAD/Single_MGN9H_Carriage_CW2.step
|
||||
- CAD/Single_MGN9H_Carriage_CW1.step
|
||||
description: Single MGN9H toolhead carriage with toolhead x endstop support (for umbilical)
|
||||
images:
|
||||
- Images/Single_MGN9H_Carriage_CW2.png
|
||||
- Images/Single_MGN9H_Carriage_CW1.png
|
||||
- Images/Single_MGN9H_Carriage_CW1_Built.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V1.8
|
||||
- V2.4
|
||||
title: Single MGN9H Carriage
|
||||
|
|
@ -0,0 +1,17 @@
|
|||
cad: []
|
||||
description: Mounts for Big Tree Tech Smart Filament Motion Sensor
|
||||
images:
|
||||
- SKR_2.png
|
||||
- SKRV1_4.png
|
||||
- Mount_B.png
|
||||
- Mount_A.png
|
||||
- IMG_2385.png
|
||||
- BTT_Sensor.png
|
||||
- IMG_2384.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
- V1.8
|
||||
- V2.4
|
||||
- VSW
|
||||
title: Mounts for BTT Filament Motion Sensor
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad: []
|
||||
description: Power Skirt for Schaffner FN284-10-06 V2.x
|
||||
images:
|
||||
- Screen_Shot_FN284_2.png
|
||||
- Screen_Shot_FN284_3.png
|
||||
- Screen_Shot_FN284_1.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Power Skirt 2.x FN284-10-06
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad: []
|
||||
description: Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress
|
||||
images:
|
||||
- IMG_2333.png
|
||||
- IMG_2334.png
|
||||
- IMG_2335.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Mounts for Terminal Blocks NC933 SPL-62
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
cad:
|
||||
- CAD/C270_assembly.step
|
||||
- CAD/C270_assembly.f3d
|
||||
description: Logitech C270 webcam front-centre mount
|
||||
images:
|
||||
- Images/C270_pin.jpg
|
||||
- Images/C270_focusing_ring.png
|
||||
- Images/C270_mount.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
- VT
|
||||
title: C270 mount
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
cad:
|
||||
- CAD/Crossrail.f3d
|
||||
- CAD/Crossrail.step
|
||||
description: Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets
|
||||
images:
|
||||
- images/DRP-03_01.jpg
|
||||
- images/DRP-03_02.jpg
|
||||
- images/DRP-03_03.jpg
|
||||
- images/crossrail_installed.jpg
|
||||
- images/crossrail_04.jpg
|
||||
- images/crossrail_05.jpg
|
||||
- images/crossrail_02.jpg
|
||||
- images/crossrail_03.jpg
|
||||
- images/crossrail_01.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
- VT
|
||||
title: Crossrail
|
||||
|
|
@ -0,0 +1,14 @@
|
|||
cad:
|
||||
- CAD/Exhaust_cover.f3d
|
||||
- CAD/Exhaust_cover.step
|
||||
description: Cover for exhaust cutout in back panel
|
||||
images:
|
||||
- Images/exhaust_cover_photo_02.jpg
|
||||
- Images/exhaust_cover_photo_01.jpg
|
||||
- Images/exhaust_cover_02.png
|
||||
- Images/exhaust_cover_01.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
- VT
|
||||
title: Exhaust_cover
|
||||
|
|
@ -0,0 +1,17 @@
|
|||
cad:
|
||||
- CAD/Exhaust_cover_SFS.f3d
|
||||
- CAD/Exhaust_cover_SFS.step
|
||||
description: Exhaust cover and BTT Smart Filament Sensor mount
|
||||
images:
|
||||
- Images/Exhaust_cover_SFS_04.jpg
|
||||
- Images/Exhaust_cover_SFS_06.jpg
|
||||
- Images/Exhaust_cover_SFS_07.jpg
|
||||
- Images/exhaust_cover_sfs_photo_01.jpg
|
||||
- Images/SFF_wiring_02.jpg
|
||||
- Images/SFF_wiring_01.jpg
|
||||
- Images/Exhaust_cover_SFS_08.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
- VT
|
||||
title: Exhaust_cover_SFS
|
||||
|
|
@ -0,0 +1,17 @@
|
|||
cad:
|
||||
- CAD/LGX_toolhead_PCB_mount_assembly.step
|
||||
description: Mount for Hartk's toolhead PCB(s) for LGX Lite
|
||||
images:
|
||||
- Images/LGX_Lite_toolhead_PCB_mount_photo_01.jpg
|
||||
- Images/github_download.png
|
||||
- Images/LGX_Lite_toolhead_PCB_mount_06.png
|
||||
- Images/LGX_Lite_toolhead_PCB_mount_07.png
|
||||
- Images/LGX_Lite_toolhead_PCB_mount_05.png
|
||||
- Images/LGX_Lite_toolhead_PCB_mount_01.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V1.8
|
||||
- V2.4
|
||||
- VSW
|
||||
- VT
|
||||
title: LGX Lite toolhead PCB mount
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad:
|
||||
- Parametric Filtered Power v1.8.f3d
|
||||
description: V1.6 Filtered Inlet and Rocker Switch for V1.8
|
||||
images:
|
||||
- pictures/Back.png
|
||||
- pictures/Front.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V1.8
|
||||
title: V1.8 Filtered Power Inlet
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
cad: []
|
||||
description: Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe for
|
||||
V0 fork with 2020 extrusions, Nema17 and MGN9 or other printers.
|
||||
images:
|
||||
- media/pw_nema17.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility: []
|
||||
title: Pocketwatch Nema 17
|
||||
|
|
@ -0,0 +1,14 @@
|
|||
cad:
|
||||
- CAD/Bed_Support_Alignment_Tools_v15.f3d
|
||||
description: The bed support alignment tools will assist in helping align the "bed
|
||||
support extrusions" to the frame. When the alignment tools are placed in all four
|
||||
corners of the Voron Printer's frame the "bed support extrusions" will butt up against
|
||||
these tools so that you can screw the "bed support extrusions" down to the printer's
|
||||
frame in the correct position.
|
||||
images:
|
||||
- images/Bed_Suport_Alignment_Tools_each_pointed_out.jpg
|
||||
- images/Bed_Support_Alignment_Tools.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Bed Support Extrusions Alignment Tools
|
||||
|
|
@ -0,0 +1,116 @@
|
|||
cad: []
|
||||
description: For any cutting machines or machines that rely on vector graphics and
|
||||
use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron
|
||||
2.4, Voron SwitchWire, Voron 0.0/0.1. and Trident These .svg files use a minimal
|
||||
amount of anchor points to achieve the vector shapes!
|
||||
images:
|
||||
- VSWL/1ColorLayerWOLogoWOSil/VSWRearPWOWOSilBackP.jpg
|
||||
- VSWL/1ColorLayerWOLogoWOSil/VSWRearPWOWOSil.jpg
|
||||
- VSWL/1ColorLayerWOLogoWOSil/VSWRearPWOWOSil.svg
|
||||
- VSWL/1ColorLayerWOLogoWithSil/VSWRearPWOWithSil.svg
|
||||
- VSWL/1ColorLayerWOLogoWithSil/VSWRearPWOWithSil.jpg
|
||||
- VSWL/1ColorLayer/VSWRearP.svg
|
||||
- VSWL/1ColorLayer/VSWRearPlay.svg
|
||||
- VSWL/1ColorLayer/VSWRearP.jpg
|
||||
- VSWL/1ColorLayer/VSWRearP.png
|
||||
- images/V0.1woWOSilBackP.jpg
|
||||
- images/Trident_DLogo.png
|
||||
- images/QWComplexVL.jpg
|
||||
- images/CombinedRedPath.png
|
||||
- images/V0.1woWOSil.jpg
|
||||
- images/V2.4_1Color.jpg
|
||||
- images/V2.4_1ColorWOWithSil.jpg
|
||||
- images/Trident_DLogo_250_Rear_Panel.stl.png
|
||||
- images/VSWRearPWOWOSilhBackP.jpg
|
||||
- images/Trident_DLogo_CAD.stl.png
|
||||
- images/VSWRearP.jpg
|
||||
- images/V0.1woWithSil.jpg
|
||||
- images/QWPlainVL2.png
|
||||
- images/QWPlainVL.png
|
||||
- images/Trident_DLogo_WOHexOutline2jpg.jpg
|
||||
- images/V2.4_1ColorWOWOSil.jpg
|
||||
- images/VSWRearPWOWOSil.jpg
|
||||
- images/VDesignPlainL.jpg
|
||||
- images/250_rear.jpg
|
||||
- images/VSWRearPWOWithSil.jpg
|
||||
- images/V2.4_3Color.jpg
|
||||
- VPlainL/1ColorLayer/VDesignPlainLorig.png
|
||||
- VPlainL/1ColorLayer/VDesignPlainL[Converted].svg
|
||||
- VPlainL/1ColorLayer/VDesignPlainL.png
|
||||
- VPlainL/1ColorLayer/VDesignPlainL.jpg
|
||||
- V2.4QueenL/QWComplexVL/QWComplexVL.jpg
|
||||
- V2.4QueenL/QWComplexVL/QWComplexVL.svg
|
||||
- V2.4QueenL/QWComplexVL/QWComplexVLBackP_RGB.jpg
|
||||
- V2.4QueenL/QWComplexVL/V2.4_3Color.svg
|
||||
- V2.4QueenL/QWiPlainVL/VDesignPlainLConverted.svg
|
||||
- V2.4QueenL/QWiPlainVL/AllPaths[Converted].svg
|
||||
- V2.4QueenL/QWiPlainVL/QWPlainVL.png
|
||||
- V2.4QueenL/QWPlainVL2/QWPlainVL2.png
|
||||
- V2.4QueenL/QWPlainVL2/QWPlainVL2.svg
|
||||
- V2.4QueenL/V2.4BackPanel/V2.4_3ColorBackP_RGB.jpg
|
||||
- V2.4QueenL/V2.4BackPanel/V2.4_3Color.svg
|
||||
- V2.4QueenL/V2.4BackPanel/V2.4_3Color.jpg
|
||||
- V2.4L/3ColorLayers/V2.4_3ColorBackP_RGB.jpg
|
||||
- V2.4L/3ColorLayers/V2.4_3Color.svg
|
||||
- V2.4L/3ColorLayers/V2.4_3Color.jpg
|
||||
- V2.4L/1ColorLayerWOWithSil/V2.4_1ColorWOWithSil.svg
|
||||
- V2.4L/1ColorLayerWOWithSil/V2.4_1ColorWOWithSil.jpg
|
||||
- V2.4L/1ColorLayer/V2.4_1Color.svg
|
||||
- V2.4L/1ColorLayer/V2.4_1Color.jpg
|
||||
- V2.4L/1ColorLayer/1Color900ppiB&W.jpg
|
||||
- V2.4L/1ColorLayerWOWOSil/V2.4WOWOSil.svg
|
||||
- V2.4L/1ColorLayerWOWOSil/V2.4WOWOSil.jpg
|
||||
- V0.1L/1ColorLayerWOWithSil/V0.1WOWithSil.svg
|
||||
- V0.1L/1ColorLayerWOWithSil/V0.1WOWithSil.jpg
|
||||
- V0.1L/1ColorLayer/CombinedRedPathLay.png
|
||||
- V0.1L/1ColorLayer/Boarderonly.svg
|
||||
- V0.1L/1ColorLayer/CombinedRedPath.svg
|
||||
- V0.1L/1ColorLayer/CombinedRedPathLay.svg
|
||||
- V0.1L/1ColorLayer/Partsonly.svg
|
||||
- V0.1L/1ColorLayer/CombinedRedPathLayout.png
|
||||
- V0.1L/1ColorLayer/CombinedRedPathLayout.svg
|
||||
- V0.1L/1ColorLayerWOWOSil/V0.1WOWOSilBackP.jpg
|
||||
- V0.1L/1ColorLayerWOWOSil/V0.1WOWOSil.jpg
|
||||
- V0.1L/1ColorLayerWOWOSil/V0.1WOWOSil.svg
|
||||
- Voron_Trident/.stl_files/Trident_DLogo_250_deck_Panel.stl.png
|
||||
- Voron_Trident/.stl_files/Trident_DLogo_250_Rear_Panel.stl.png
|
||||
- Voron_Trident/.stl_files/Trident_DLogo_350_deck_Panel.stl.png
|
||||
- Voron_Trident/.stl_files/Trident_DLogo_300_deck_Panel.stl.png
|
||||
- Voron_Trident/RD_ALL_correct_dim/250_rear.jpg
|
||||
- Voron_Trident/1ColorLayer/Trident_DLogo.png
|
||||
- Voron_Trident/1ColorLayer/Trident_DLogo_WHex_CPaths.svg
|
||||
- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/250_Panels_SVG_Files/Trident_DLogo_250_rear_WithHex.svg
|
||||
- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/250_Panels_SVG_Files/Trident_DLogo_250_deck_WithHex.svg
|
||||
- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/250_Panels_SVG_Files/Trident_DLogo_250_deck_WithHex.jpg
|
||||
- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/250_Panels_SVG_Files/Trident_DLogo_250_rear_WithHex.jpg
|
||||
- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/300_Panels_SVG_Files/Trident_DLogo_300_rear_WithHex.jpg
|
||||
- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/300_Panels_SVG_Files/Trident_DLogo_300_deck_WithHex.jpg
|
||||
- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/300_Panels_SVG_Files/Trident_DLogo_300_deck_WithHex.svg
|
||||
- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/300_Panels_SVG_Files/Trident_DLogo_300_rear_WithHex.svg
|
||||
- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/350_Panels_SVG_Files/Trident_DLogo_350_rear_WithHex.jpg
|
||||
- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/350_Panels_SVG_Files/Trident_DLogo_350_deck_WithHex.jpg
|
||||
- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/350_Panels_SVG_Files/Trident_DLogo_350_deck_WithHex.svg
|
||||
- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/350_Panels_SVG_Files/Trident_DLogo_350_rear_WithHex.svg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/Trident_DLogo_WOHex_CPath.svg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/Trident_DLogo_WOHexOutline2jpg.jpg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_DLogo_250_deck.jpg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_DLogo_250_rear.jpg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_300_SVG_Files/Trident_DLogo_300_rear.svg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_300_SVG_Files/Trident_DLogo_300_deck.svg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_300_SVG_Files/Trident_DLogo_300_deck.jpg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_300_SVG_Files/Trident_DLogo_300_rear.jpg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_350_SVG_Files/Trident_DLogo_350_deck.jpg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_350_SVG_Files/Trident_DLogo_350_rear.jpg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_350_SVG_Files/Trident_DLogo_350_rear.svg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_350_SVG_Files/Trident_DLogo_350_deck.svg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_250_SVG_Files/Trident_DLogo_250_deck.jpg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_250_SVG_Files/Trident_DLogo_250_rear.jpg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_250_SVG_Files/Trident_DLogo_250_rear.svg
|
||||
- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_250_SVG_Files/Trident_DLogo_250_deck.svg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
- V2.4
|
||||
- VSW
|
||||
- VT
|
||||
title: Cricut Voron Logos
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
cad:
|
||||
- CAD/Bowden_Guide.step
|
||||
description: Bowden tube guide and CANBUS wire support
|
||||
images:
|
||||
- IMAGES/Tube1.jpg
|
||||
- IMAGES/chirpy.jpg
|
||||
- IMAGES/Tube_Guide.png
|
||||
- IMAGES/Short.jpg
|
||||
- IMAGES/Dokuu.jpg
|
||||
- IMAGES/chirpy2.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V1.8
|
||||
- V2.4
|
||||
- VT
|
||||
title: Bowden Tube Guide
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
cad:
|
||||
- Fly-F407ZG-Mount-v3.f3d
|
||||
description: 'Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG'
|
||||
images:
|
||||
- Fly-F407ZG-Mounted.jpg
|
||||
- Fly-F407ZG-Printed.jpg
|
||||
- FlyF407ZG.PNG
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: Fly F407ZG Mount
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
cad:
|
||||
- CAD/Ender3SW v2.f3d
|
||||
description: Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics and
|
||||
most other parts of the Voron Switchwire.
|
||||
images:
|
||||
- IMAGES/BOTTOM.PNG
|
||||
- IMAGES/LEFT.PNG
|
||||
- IMAGES/General.PNG
|
||||
- IMAGES/BACK.PNG
|
||||
- IMAGES/RIGHT.PNG
|
||||
- IMAGES/FRONT.PNG
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- VSW
|
||||
title: Ender 3 and Ender 3 Pro Switchwire Mod
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad:
|
||||
- belt_wrench_v4.step
|
||||
description: Wrench for easier turning of the belt tension knobs on V0.1
|
||||
images:
|
||||
- Images/Tool.jpg
|
||||
- Images/Tool_2.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Belt Tension Wrench
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
cad:
|
||||
- STM32_Klipper_Expander_v5.step
|
||||
- STM32_Klipper_Expander_No_Holes_v2.step
|
||||
description: Mounting brackets for the klipper expander using vhb tape or mounting
|
||||
screws
|
||||
images:
|
||||
- Images/Mount_Top.jpg
|
||||
- Images/Mount_Side.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
- V1.8
|
||||
- V2.4
|
||||
- VSW
|
||||
- VT
|
||||
title: Klipper Expander Mount
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
cad: []
|
||||
description: Slim mount for logitech c920 webcam
|
||||
images: []
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V1.8
|
||||
- V2.4
|
||||
title: c920 Mount
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
cad: []
|
||||
description: Modified beltchain parts for V0 Z cables
|
||||
images: []
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: V0 beltchains
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
cad:
|
||||
- CAD/RefillPlease_v20.f3d
|
||||
description: Replace the 2.4 stock bowden tube holder and add a filament runout sensor
|
||||
images:
|
||||
- images/refillplease.png
|
||||
- images/lever.png
|
||||
- images/Overview.png
|
||||
- images/notch.png
|
||||
- images/interior90.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V1.8
|
||||
- V2.4
|
||||
- VT
|
||||
title: V2.4 Filament runout sensor
|
||||
|
|
@ -0,0 +1,20 @@
|
|||
cad: []
|
||||
description: Mount to replace v2.4 (MGN9) probe with a Creality CR Touch
|
||||
images:
|
||||
- Images/CRTouch-Front_sm.JPG
|
||||
- Images/CRTouch_Prep3_sm.jpg
|
||||
- Images/CRTouch-rear2_sm.JPG
|
||||
- Images/CRTouch_Prep1_sm.jpg
|
||||
- Images/CRTouch-b1_install1_sm.JPG
|
||||
- Images/CRTouch-ex2_sm.jpg
|
||||
- Images/CRTouch_Inserts1_sm.jpg
|
||||
- Images/CRTouch-b1_explode_sm.JPG
|
||||
- Images/CRTouch_Prep0_sm.jpg
|
||||
- Images/CRTouch-wire1_sm.jpg
|
||||
- Images/CRTouch-ex1_sm.jpg
|
||||
- Images/CRTouch-b1_install2_sm.JPG
|
||||
- Images/CRTouch-ex3_sm.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: 'V2.4 CR Touch Snap Mount '
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
cad:
|
||||
- CAD/Handle_Mini_Backdoor.step
|
||||
- CAD/Back_Door.step
|
||||
- CAD/Door_Latch_x2.step
|
||||
description: Door for easy hardware access
|
||||
images:
|
||||
- Images/2.jpg
|
||||
- Images/3.jpg
|
||||
- Images/1.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Back Door
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad:
|
||||
- CAD/Deck_Panel_Rear.step
|
||||
description: Covers the hotbed cables
|
||||
images:
|
||||
- Images/Deck_panel_Rear.jpg
|
||||
- Images/1.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Deck Panel
|
||||
|
|
@ -0,0 +1,14 @@
|
|||
cad:
|
||||
- CAD/Drawer_Version_C.step
|
||||
- CAD/Drawer_Version_B.step
|
||||
- CAD/Drawer_Version_A.step
|
||||
description: Drawer in four different versions
|
||||
images:
|
||||
- Images/4.jpg
|
||||
- Images/2.jpg
|
||||
- Images/3.jpg
|
||||
- Images/1.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Drawer
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
cad:
|
||||
- CAD/Handle_Mini_Front.step
|
||||
- CAD/Door Frame.step
|
||||
- CAD/Door_Latch_x2.step
|
||||
description: Door in a frame
|
||||
images:
|
||||
- Images/2.jpg
|
||||
- Images/1.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Front Door
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
cad:
|
||||
- CAD/Filter Cage.step
|
||||
- CAD/Fan Mounting.step
|
||||
- CAD/HEPA_Filter.step
|
||||
description: "Filter case with fan\xB4s"
|
||||
images:
|
||||
- Images/1.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Hepa Filter
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
cad:
|
||||
- CAD/Mid_Panel_with_cablemanagement.step
|
||||
- CAD/Mid_Panel.step
|
||||
description: Panel for SKR1.4/1.4 or SKR E3 mini mount
|
||||
images:
|
||||
- Images/2.jpg
|
||||
- Images/3.JPG
|
||||
- Images/1.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Mid Panel
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
cad: []
|
||||
description: "mounting for Neopixel strip with 8 LED\xB4s"
|
||||
images:
|
||||
- Images/2.jpg
|
||||
- Images/3.jpg
|
||||
- Images/1.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Neopixel Case
|
||||
|
|
@ -0,0 +1,14 @@
|
|||
cad:
|
||||
- CAD/Panel right.step
|
||||
- CAD/Panel left.step
|
||||
description: Panels with intergrated hinge
|
||||
images:
|
||||
- Images/4.jpg
|
||||
- Images/5.jpg
|
||||
- Images/2.jpg
|
||||
- Images/3.jpg
|
||||
- Images/1.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: Side Panels
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
cad:
|
||||
- CAD/Feed_Slot_v7.f3d
|
||||
- CAD/Feed_Slot_v7.step
|
||||
description: A feed slot with a filament pass-through
|
||||
images:
|
||||
- images/Mounted_1.png
|
||||
- images/CAD_offset_profile.png
|
||||
- images/Mounted_2.png
|
||||
- images/CAD_front_profile.png
|
||||
- images/CAD_bottom_profile.png
|
||||
- images/CAD_side_profile.png
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- VSW
|
||||
title: Feed slot with filament pass-through
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
cad:
|
||||
- cad/plug_panel_generic_combo.f3d
|
||||
description: Skirt power panel for generic amazon plug/switch/fuse combo module, with
|
||||
2 keystone sockets
|
||||
images:
|
||||
- img/plug_panel.jpg
|
||||
- img/AC19A10-G8.jpg
|
||||
- img/plug_panel_generic_combo.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: V2.4 Plug Panel Generic Combo
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
cad:
|
||||
- CAD/v0_1515_led_diffuser_assembly.f3d
|
||||
- CAD/v0_1515_led_diffuser_assembly.step
|
||||
description: Snap in 1515 Led mount for WS2812B
|
||||
images:
|
||||
- IMG/colors.jpg
|
||||
- IMG/led_strip.jpg
|
||||
- IMG/wiring.jpg
|
||||
- IMG/print_finish.gif
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
title: 1515 LED Mount
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
cad: []
|
||||
description: Skirt keystone for ADXL345 using Microfit 3.0
|
||||
images:
|
||||
- IMG/skirt.keystone.adxl345.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V2.4
|
||||
title: adxl345 skirt keystone
|
||||
|
|
@ -0,0 +1,85 @@
|
|||
cad:
|
||||
- CAD/Voron_KlickyProbe_v2_v56.step
|
||||
description: Microswitch based inductive probe replacement
|
||||
images:
|
||||
- Printers/v0/Photos/klicky_v0.jpg
|
||||
- Printers/v0/Photos/V0_dock.jpg
|
||||
- Printers/v0/Photos/V0.1_probe_mount_3.jpg
|
||||
- Printers/v0/Photos/probe_wires_detail.png
|
||||
- Printers/v0/Photos/V0.1_probe_mount_2.jpg
|
||||
- Printers/v0/Photos/DockMount_fixed.jpg
|
||||
- Printers/v0/Photos/integrated_mount.jpg
|
||||
- Printers/v0/Photos/V0.1_probe_mount_1.jpg
|
||||
- Printers/v0/Photos/V0_probedock_mount.jpg
|
||||
- Printers/v0/Photos/integrated_cowling_wklicky.jpg
|
||||
- Printers/v0/Photos/V0.1_complete.jpg
|
||||
- Printers/v0/Photos/front_cowling_mount.jpg
|
||||
- Printers/v0/Photos/front_cowling_mount_back.jpg
|
||||
- Printers/v0/Photos/DockMount_TopScrews.jpg
|
||||
- Printers/v0/Photos/dockmount_attached.jpg
|
||||
- Printers/v0/Photos/Fan_duct_v0_mounted.jpg
|
||||
- Printers/v0/Photos/V0_probe_3.jpg
|
||||
- Printers/v0/Photos/V0_probe_2.jpg
|
||||
- Printers/v0/Photos/V0_probe_1.jpg
|
||||
- Printers/v0/Photos/V0_probe_5.jpg
|
||||
- Printers/v0/Photos/V0.1_umbilical.jpg
|
||||
- Printers/v0/Photos/Klicky_v0_family.jpg
|
||||
- Printers/v0/Photos/V0_probe_4.jpg
|
||||
- Printers/v0/Photos/DockMount_SideScrews.jpg
|
||||
- Printers/v0/Photos/v0_eletronic.JPG
|
||||
- Printers/v0/Photos/V0.1_back.jpg
|
||||
- Printers/v0/Photos/DockMount_extrabeef.jpg
|
||||
- Printers/v0/Photos/V0.1_attached.jpg
|
||||
- Printers/v0/Photos/V0.1_front_cowling_mount.jpg
|
||||
- Printers/v0/Photos/V0_dock_mount.png
|
||||
- Printers/v0/Photos/V0_dock_mount.jpg
|
||||
- Printers/v0/Photos/Fan_duct_v0_wklicky.jpg
|
||||
- Printers/v0/Photos/DockMount_variable.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_Mount_wiring_1.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/Probe_topside.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/Fixed_sidemount_left.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_Mount_wiring_3.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_Mount_wiring_2.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/DockMount.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/Klicky_probe_press_Helper.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_mount_press_Helper.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_Mount_wiring_4.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/legacy_fixedmount.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_Mount_wiring_complete.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/Klicky_Probe.png
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/Klicky_Probe_recommended_printing_orientation.png
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/Gantry_Sidemount_installed.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_v1_underside_marked_magnets.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_mount_press_Helper_inuseBack.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/klicky_v1.8_v2.4_Legacy_Trident.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/Klicky_Probe installed.png
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/Probe_MStoArrow_alignment.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_mount_press_Helper_inuseTop.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_dock_complete.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/Klicky_probe_press_Helper_inuse.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/Voron_V2.4_300mm_back.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_dock_components.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/Fixed_sidemount_right.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_components.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_v1_underside.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_dock_2.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/Voron_Klicky_Probe.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_install.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/Fixed_mount_complete.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_complete.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/Variable_mount_complete.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/DockMountandProbeMount.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/ABMountInstalled.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_dock_1.jpg
|
||||
- Printers/v1.8_v2.4_Legacy_Trident/Photos/ABMountCheckforContiuity.jpg
|
||||
- Photos/Klicky_Probe.png
|
||||
- Photos/Klicky_Probe_recommended_printing_orientation.png
|
||||
- Photos/Voron_V2.4_300mm_back.jpg
|
||||
- Photos/klicky_base.jpg
|
||||
mod_version: 1
|
||||
printer_compatibility:
|
||||
- V0.2
|
||||
- V1.8
|
||||
- V2.4
|
||||
- VT
|
||||
title: Klicky Probe
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue