From 20af93de956cdee9b0aa24a10ca267412f8fc1e4 Mon Sep 17 00:00:00 2001 From: Florian Heilmann Date: Thu, 13 Jul 2023 16:30:27 +0200 Subject: [PATCH] VoronUsers CI Update (#969) --- .github/PULL_REQUEST_TEMPLATE.md | 100 ++- .github/workflows/ci-build.yml | 48 - .github/workflows/pull_request_ci.yml | 85 ++ .github/workflows/push_main_ci.yml | 24 + printer_mods/1-0-R/handle/.metadata.yml | 20 + .../exhaust_housing_side_entry/.metadata.yml | 13 + .../huvud_chain_mount/.metadata.yml | 13 + .../3dpandme/Fannypack_zero/.metadata.yml | 11 + .../Thermistor_holder_zero/.metadata.yml | 12 + .../3vilson/V0.1_Skirt_Holes/.metadata.yml | 8 + .../3vilson/V0.1_Skirt_Inlet/.metadata.yml | 8 + printer_mods/42bios/LED_mount/.metadata.yml | 13 + .../corner_panel_clip_cable/.metadata.yml | 10 + .../exhaust_filter_housing_side/.metadata.yml | 9 + printer_mods/42bios/relay_mount/.metadata.yml | 10 + .../cable_routing_z_belt_cover/.metadata.yml | 13 + .../270-Clamping-Hinges/.metadata.yml | 15 + .../.metadata.yml | 12 + .../.metadata.yml | 11 + .../Revo_Nozzle_Skirt_Trident/.metadata.yml | 10 + .../V0_Neopixel_Front_Bed_Mount/.metadata.yml | 13 + .../Mount_for_Electreeks_Camera/.metadata.yml | 8 + printer_mods/Badnoob/AB-BN/.metadata.yml | 20 + .../Badnoob/ABBN_for_Stock/.metadata.yml | 13 + .../Badnoob/Precision_AB_Drive/.metadata.yml | 11 + .../Badnoob/Rail_Alignment/.metadata.yml | 8 + .../LoudOwl_aka_Stabby/.metadata.yml | 21 + .../CornerPanel_SpoolHolder/.metadata.yml | 10 + .../Horizontal-Spool-Holder/.metadata.yml | 11 + .../.metadata.yml | 8 + printer_mods/Blamm/lrs-100/.metadata.yml | 9 + .../Deck_Panel_Backpack/.metadata.yml | 11 + .../BlueBear/Wago_221_mount/.metadata.yml | 18 + .../BlueBear/Ziptie_Mount/.metadata.yml | 12 + .../Boingomw/Wago_mount/.metadata.yml | 11 + .../Mini-After-LGX-Lite/.metadata.yml | 20 + .../.metadata.yml | 10 + .../ESP32_DIN_Rail_Bracket/.metadata.yml | 9 + .../PITFT50_45_degree_mount/.metadata.yml | 11 + .../CannedBass/Trident_Bed_Fans/.metadata.yml | 10 + .../Ch4rlesB/V0_Handles_Slim/.metadata.yml | 10 + .../Tool_free_tensioner/.metadata.yml | 10 + .../Z_Belt_Clip/.metadata.yml | 10 + .../Raspberry_Pi_Zero_Bracket/.metadata.yml | 11 + .../DC67/plug_panel_schaffner/.metadata.yml | 10 + .../.metadata.yml | 10 + .../Voron_V0_MW_PS_Bracket/.metadata.yml | 10 + .../DaGlo/Voron_V0_SSR_Mount/.metadata.yml | 12 + .../Tophat_Exhaust_Filter/.metadata.yml | 14 + .../the_Cephalopods_limb/.metadata.yml | 15 + printer_mods/Dan88/V0skirt/.metadata.yml | 8 + .../.metadata.yml | 13 + .../DerekBackus/LED_Holder/.metadata.yml | 10 + .../Right_Skirt_Switch/.metadata.yml | 10 + .../Derpimus/Block_handle_v0.1/.metadata.yml | 9 + .../Duet_3_3HC_Din_Bracket/.metadata.yml | 7 + .../Duet_3_6HC_Din_Bracket/.metadata.yml | 8 + .../.metadata.yml | 22 + .../DrGhetto/GhettoPanels/.metadata.yml | 9 + .../ElPoPo/RemovableDoors/.metadata.yml | 10 + .../Electroleon/U2C_Mounting/.metadata.yml | 12 + .../Ellis/15x15_Drag_Chain_End/.metadata.yml | 9 + .../Ellis/Badge_Retractor_Mount/.metadata.yml | 11 + printer_mods/Ellis/Bed_Fans/.metadata.yml | 13 + .../Ellis/Short_Z_Joints/.metadata.yml | 10 + .../Ellis/Single_MGN9H_Carriage/.metadata.yml | 15 + .../.metadata.yml | 17 + .../PowerSkirt_FN284-10-06/.metadata.yml | 10 + .../.metadata.yml | 10 + printer_mods/Fiction/C270_mount/.metadata.yml | 13 + printer_mods/Fiction/Crossrail/.metadata.yml | 19 + .../Fiction/Exhaust_cover/.metadata.yml | 14 + .../Fiction/Exhaust_cover_SFS/.metadata.yml | 17 + .../LGX_Lite_toolhead_PCB_mount/.metadata.yml | 17 + .../FreeformFez/FilteredPower/.metadata.yml | 10 + .../GSL12/pocketwatch_nema17/.metadata.yml | 8 + .../Bed_Support_Alignment_Tools/.metadata.yml | 14 + .../Cricut_Voron_Logos/.metadata.yml | 116 +++ .../Galvanic/Bowden_Tube_Guide/.metadata.yml | 16 + .../GiulianoM/FlyF407ZG/.metadata.yml | 11 + .../ender-3_(pro)_switchwire/.metadata.yml | 15 + .../Belt_Tension_Wrench/.metadata.yml | 10 + .../Klipper_Expander_Mount/.metadata.yml | 16 + printer_mods/Iakabos/C920_mount/.metadata.yml | 8 + .../Iakabos/V0_beltchain/.metadata.yml | 7 + printer_mods/JD/RefillPlease/.metadata.yml | 15 + .../JJFX/CRTouch_Snap_Mount/.metadata.yml | 20 + printer_mods/JNP/Back-Door/.metadata.yml | 13 + .../JNP/Deck_Panel_Rear/.metadata.yml | 10 + printer_mods/JNP/Drawer/.metadata.yml | 14 + printer_mods/JNP/Front-Door/.metadata.yml | 12 + printer_mods/JNP/HEPA-Filter/.metadata.yml | 11 + printer_mods/JNP/Mid-Panel/.metadata.yml | 12 + .../JNP/Neopixel-Y_Rails/.metadata.yml | 10 + printer_mods/JNP/Side-Panels/.metadata.yml | 14 + .../.metadata.yml | 15 + .../.metadata.yml | 12 + printer_mods/Jon/1515_led_mount/.metadata.yml | 13 + .../Jon/adxl345_skirt_keystone/.metadata.yml | 8 + printer_mods/JosAr/Klicky-Probe/.metadata.yml | 85 ++ .../KenadyDwag44/sw_lightbar/.metadata.yml | 8 + printer_mods/KevinAkaSam/VEFACH/.metadata.yml | 20 + .../V0_reverse_bowden_mount/.metadata.yml | 12 + .../.metadata.yml | 13 + .../.metadata.yml | 13 + printer_mods/Koios/6mm_Glass/.metadata.yml | 12 + printer_mods/Koios/C920_Mount/.metadata.yml | 10 + printer_mods/Koios/LED_Mounts/.metadata.yml | 10 + .../Koios/V0_C920_Tophat_Mount/.metadata.yml | 13 + .../kirigami_bed_front/.metadata.yml | 8 + .../Kruppes/Closed_Bottom/.metadata.yml | 15 + .../Deck_Panel_inserts_logo/.metadata.yml | 13 + .../Kruppes/Tension_Meter/.metadata.yml | 14 + .../Kyleisah/CableGator/.metadata.yml | 20 + printer_mods/LJ/Scrubby/.metadata.yml | 17 + .../.metadata.yml | 19 + .../3mm_tophat_panel_parts/.metadata.yml | 7 + .../LoCoCNC/MGN7H_Shims/.metadata.yml | 7 + .../Mosquito_PTFE_Cutting_Jig/.metadata.yml | 7 + .../Strain_Relief_w_Microfit/.metadata.yml | 11 + printer_mods/LoCoCNC/ssr_strap/.metadata.yml | 9 + .../LoCoCNC/wire_grommets/.metadata.yml | 9 + .../LoganFraser/ComboInlet/.metadata.yml | 12 + .../HorseshoeSpoolHolder/.metadata.yml | 17 + .../LoganFraser/PiPlate/.metadata.yml | 12 + .../TridentInvertedElectronics/.metadata.yml | 11 + .../LoganFraser/WagoMounts/.metadata.yml | 15 + .../Long/Mantis_Dual_5015/.metadata.yml | 63 ++ .../SSD1306_Case_Front_Cover/.metadata.yml | 12 + .../.metadata.yml | 12 + .../MSA/V0-Belt-tension-helper/.metadata.yml | 22 + .../MSiemons/TophatHingeV0.1/.metadata.yml | 17 + .../Mac10goesBRRRT/BTT_PiTFT/.metadata.yml | 14 + .../Hartk_Mount_Galileo/.metadata.yml | 9 + .../Switchwire_Front_Grill/.metadata.yml | 8 + .../MasturMynd/Stealth_Zero/.metadata.yml | 17 + .../v0.1_belted_z_drive/.metadata.yml | 19 + .../Maverick/MiniSB_LGX_Lite/.metadata.yml | 15 + .../Maverick/MiniSB_Rapido/.metadata.yml | 11 + .../Maverick/MiniSB_Sharkfin/.metadata.yml | 13 + .../Maverick/V0.2_Handles/.metadata.yml | 14 + .../V0.2_Stealth_Skirts/.metadata.yml | 13 + .../Switchwire_Y_Belt_Tensioner/.metadata.yml | 16 + .../Mellow/V0_Fly-Gemini/.metadata.yml | 7 + .../.metadata.yml | 15 + .../Minsekt/Rear_Umbilical/.metadata.yml | 10 + .../MrBean66/SKR_PRO_Mount/.metadata.yml | 9 + .../MrDespair/MiniAB_Pinda/.metadata.yml | 15 + .../Mrgl-Mrgl/LGX_Lite_Mount/.metadata.yml | 10 + .../.metadata.yml | 7 + .../Nomsplease/60mm_Shaft_Jig/.metadata.yml | 8 + .../V0_Mods/duet_wifi_mount/.metadata.yml | 10 + .../V0_Mods/led_mounts/.metadata.yml | 11 + .../V0_Mods/panel_mounts/.metadata.yml | 9 + .../pi_zero_camera_mount/.metadata.yml | 9 + .../.metadata.yml | 8 + .../BTT_24V_UPS_Metal_DIN_Mount/.metadata.yml | 9 + .../.metadata.yml | 10 + .../Oakman/RPI_Metal_DIN_Mount/.metadata.yml | 8 + .../C17-EXT-CARTRIDGE/.metadata.yml | 13 + printer_mods/OboMaker3D/C17-EXT/.metadata.yml | 17 + .../Phalanx/Other-V2-Idlers/.metadata.yml | 16 + .../.metadata.yml | 12 + .../V0_Two_Piece_Back_Panel/.metadata.yml | 9 + .../.metadata.yml | 8 + .../Magnetic_top_panel/.metadata.yml | 11 + .../C92X_PsycHoShafts_Mount/.metadata.yml | 15 + .../V0-Adafruit-Y_Rails/.metadata.yml | 10 + printer_mods/README.md | 835 +++++++++--------- .../Rhastlyn/60mmFanCover/.metadata.yml | 9 + .../WansviewCameraMount/.metadata.yml | 13 + printer_mods/RockNLol/RockNRoll/.metadata.yml | 20 + .../SideSkirtPowerSwitch/.metadata.yml | 10 + .../.metadata.yml | 18 + .../Trident_dual_power_switch/.metadata.yml | 10 + .../Orange_Pi_3_LTS_DIN/.metadata.yml | 11 + .../Shteeeeeve/V01-LED-Tophat/.metadata.yml | 13 + .../Slidr/PanzerBalls2.4/.metadata.yml | 9 + .../Slidr/PanzerChain2.4/.metadata.yml | 8 + .../LCD_case_mod/.metadata.yml | 11 + .../Z_drive_motor_mount/.metadata.yml | 11 + .../StvPtrsn/320mm_Build/.metadata.yml | 13 + .../.metadata.yml | 12 + .../Parts_Jigs_and_Mods/.metadata.yml | 23 + .../Side_Fan_Support_No_Tape/.metadata.yml | 27 + .../Takuya/USBCameraMount/.metadata.yml | 10 + .../TheSquiffy/V0_Belts_holder/.metadata.yml | 17 + .../Logitech_C270_Mount/.metadata.yml | 11 + .../Tircown/DIN_mount_RS-15-5/.metadata.yml | 7 + .../Tircown/Display_mount_5inch/.metadata.yml | 11 + .../Raspberry_plug_panel/.metadata.yml | 10 + .../Tircown/V01_skirt_buttons/.metadata.yml | 11 + .../Ender_3Pro_Switchwire/.metadata.yml | 15 + .../Ultrawaffles/Ender_3_to_SW/.metadata.yml | 10 + .../RGB_LED_grid_for_SB/.metadata.yml | 12 + .../Electronics-Bay-Seperator/.metadata.yml | 8 + .../Pull-out_electrical_store/.metadata.yml | 14 + .../Zen3D/V0_1515_T-nut/.metadata.yml | 10 + printer_mods/Zen3D/V0_Handle/.metadata.yml | 9 + .../V0_MidPanel_HexPattern/.metadata.yml | 15 + printer_mods/Zen3D/V0_Skirt/.metadata.yml | 15 + .../RS_PSU_DIN_Brackets/.metadata.yml | 10 + .../ademuri/Lights_Camera_Voron/.metadata.yml | 10 + .../MeanWell_UHP_DIN_mount/.metadata.yml | 14 + .../Raspberry_Pi_DIN_mount/.metadata.yml | 13 + .../aeresov/SKR_DIN_mount/.metadata.yml | 13 + .../TL_filament_sensor_bracket/.metadata.yml | 13 + .../aeresov/cable_tie_DIN_mount/.metadata.yml | 11 + .../al3ph/analog_timer_mount/.metadata.yml | 7 + .../al3ph/filament_runout/.metadata.yml | 14 + printer_mods/al3ph/led_mount/.metadata.yml | 7 + printer_mods/al3ph/pl05_mount/.metadata.yml | 10 + .../alanho/BTT_PITFT50_v2_Mount/.metadata.yml | 10 + .../IKEA_Dioder_Led_Mount/.metadata.yml | 12 + .../ds18b20-sensor-mount/.metadata.yml | 16 + .../ardichoke/v0-long-thumb-nut/.metadata.yml | 10 + printer_mods/arkeet/dti-mount/.metadata.yml | 13 + .../arkeet/magnet-fan-cover/.metadata.yml | 15 + printer_mods/arkeet/mgn12/.metadata.yml | 13 + printer_mods/arkeet/v0-dc-inlet/.metadata.yml | 14 + .../revo_skirt_nozzle_holder/.metadata.yml | 14 + .../Nova_Printhead/.metadata.yml | 16 + .../bobbleheed/Filament_Runout/.metadata.yml | 13 + .../bobbleheed/Magnetic_Panels/.metadata.yml | 12 + .../.metadata.yml | 8 + .../buzzdalf/connector_cover/.metadata.yml | 10 + .../ender_switchwire_taller_z/.metadata.yml | 15 + printer_mods/buzzdalf/ytension/.metadata.yml | 12 + .../bythorsthunder/MGN9_Backers/.metadata.yml | 13 + .../Stealthburner_Rapido_Uhf/.metadata.yml | 13 + printer_mods/chirpy/NozzleWiper/.metadata.yml | 22 + .../chirpy/RunoutUnklicky/.metadata.yml | 23 + printer_mods/chirpy/TipTophat/.metadata.yml | 27 + .../20x20mm_Profile_Covers/.metadata.yml | 25 + .../chri.kai.in/Angry_CAM_USB/.metadata.yml | 65 ++ .../Exhaust_Adapter_100mm/.metadata.yml | 13 + .../270_degree_hinge/.metadata.yml | 15 + .../.metadata.yml | 13 + .../claytono/2.4-extrusion-jig/.metadata.yml | 10 + .../claytono/fysetc-s6-v2-mount/.metadata.yml | 10 + .../claytono/v0-zip-tie-skirts/.metadata.yml | 11 + .../Monster8_heatsert_mount/.metadata.yml | 11 + .../v01_motor_panel_no_rub/.metadata.yml | 11 + .../Voron_Parts_Logo/.metadata.yml | 17 + .../Voron_V0.1_Parts_Logo/.metadata.yml | 13 + .../consibonsi/Y-Mod_SW_9mm/.metadata.yml | 10 + .../csch0/SW_FanMount_No_Tape/.metadata.yml | 9 + .../.metadata.yml | 7 + .../.metadata.yml | 17 + .../HEPA_Filter_Exhaust/.metadata.yml | 14 + .../v0_bed_wagos/.metadata.yml | 12 + .../v0_power_wagos/.metadata.yml | 12 + .../v2_bed_wagos/.metadata.yml | 12 + .../doubletrouble/V0_Skirt_Mod/.metadata.yml | 10 + .../.metadata.yml | 16 + printer_mods/eddie/LED_Bar_Clip/.metadata.yml | 11 + .../eddie/V1.8_12mm_Z_Mod/.metadata.yml | 12 + .../.metadata.yml | 10 + .../.metadata.yml | 16 + .../V2.4-Trident-Spool-Holders/.metadata.yml | 15 + .../evandepol/Crydom-GN-Guard/.metadata.yml | 10 + .../Voron2.4-Cable-clamps/.metadata.yml | 14 + .../falo/lgx_lite_side_can/.metadata.yml | 12 + .../falo/magnetic_grill_cover/.metadata.yml | 12 + .../falo/toolhead_pcb_to_can/.metadata.yml | 13 + .../filotto78/6mm_slot_cover/.metadata.yml | 13 + .../gamebofh/door-panels/.metadata.yml | 16 + .../gauravmm/crazy_mozzie_cw2/.metadata.yml | 15 + .../.metadata.yml | 10 + .../dual_rail_guide/.metadata.yml | 8 + printer_mods/geoffreyyoung/lgx/.metadata.yml | 16 + .../spider_bracket/.metadata.yml | 8 + .../manta-m8p-bracket/.metadata.yml | 9 + .../v0-extended-tophat-hinge/.metadata.yml | 13 + .../golas/v0-trident-skirt-mix/.metadata.yml | 23 + .../.metadata.yml | 11 + .../.metadata.yml | 9 + .../hartk1213/Voron0_C14Inlet/.metadata.yml | 12 + .../Voron0_ExtendedLegs/.metadata.yml | 8 + .../Voron0_ExtrusionSkirt/.metadata.yml | 9 + .../Voron0_Hinged_Top_Hat/.metadata.yml | 24 + .../Voron0_MGN9C_X_Axis/.metadata.yml | 10 + .../.metadata.yml | 8 + .../Voron0_display_dualcolor/.metadata.yml | 8 + .../hartk1213/Voron2.4_GE5C/.metadata.yml | 16 + .../Voron2.4_SexBolt_ZEndstop/.metadata.yml | 18 + .../Voron2.4_Trident_Pins_Mod/.metadata.yml | 30 + .../.metadata.yml | 14 + .../parametric_spool_holder/.metadata.yml | 10 + .../plug_panel_generic/.metadata.yml | 9 + .../exhaust_120mm_duct/.metadata.yml | 17 + .../bottom_panel_mag_clip/.metadata.yml | 10 + .../.metadata.yml | 9 + .../hijax_pl/corner_panel_clip/.metadata.yml | 7 + .../hijax_pl/din_rail_mount/.metadata.yml | 12 + .../.metadata.yml | 7 + .../FYSETC_Spider_DIN_Mount/.metadata.yml | 17 + .../hymness1/10x11mm_chain_VSW/.metadata.yml | 10 + .../.metadata.yml | 11 + .../iblue/TophatExtractor/.metadata.yml | 12 + printer_mods/jappaj/FanSaver/.metadata.yml | 16 + .../Z_Idler_Shoulder_Bolt/.metadata.yml | 10 + .../jatson/plug_panel_schurter/.metadata.yml | 14 + .../jaysuk/4.3_fly_screen_mount/.metadata.yml | 10 + .../4.3_Inch_Touchscreen_Mount/.metadata.yml | 20 + .../.metadata.yml | 13 + .../jeoje/Sturdy_Handles/.metadata.yml | 12 + .../.metadata.yml | 11 + .../jgehrig/v0_lcdskirt/.metadata.yml | 22 + .../Raspberry_Pi_Camera_Mount/.metadata.yml | 14 + .../v0_clippable_ledmounts/.metadata.yml | 11 + .../kageurufu/mgn12-euclid/.metadata.yml | 14 + .../V2-200_4020_Electronics_Fan/.metadata.yml | 10 + .../V2_3x_Keystone_Plugpanel/.metadata.yml | 9 + .../khay/micro_backplate/.metadata.yml | 12 + .../v0_sherpa_mini_direct_drive/.metadata.yml | 8 + printer_mods/lakai/Bruag_Skirts/.metadata.yml | 10 + .../leandromarceddu/PowerSkirt/.metadata.yml | 10 + .../littleferris/V0_Skirt_Inlet/.metadata.yml | 11 + .../Vertical_PSU_Mount/.metadata.yml | 7 + .../madros/V0_skirt_OLED/.metadata.yml | 9 + .../AB_Turbo_Mod/.metadata.yml | 15 + .../VSW_Double_60mm_Fan_Mount/.metadata.yml | 12 + .../MKS_Mosfet_Mount/.metadata.yml | 12 + .../10x11_Cable_Chain_Endcaps/.metadata.yml | 19 + .../.metadata.yml | 19 + .../mosher/m3_door_hinges/.metadata.yml | 9 + .../mpfl/V0.1_skirt_OLED/.metadata.yml | 8 + .../.metadata.yml | 13 + .../natewalck/v1.8_Jigs/.metadata.yml | 8 + .../V0.1_Movable_Pulley_Z/.metadata.yml | 31 + .../Neopixel_Holder/.metadata.yml | 17 + .../ommy/roller_brackets/.metadata.yml | 8 + .../oxno/rbp_zero_braket/.metadata.yml | 10 + .../chain_anchor-ADXL345_mount/.metadata.yml | 18 + .../piet206/V1.8._Z_Rails_Mod/.metadata.yml | 11 + .../prasadp4009/SW_SB_CRTouch/.metadata.yml | 10 + .../front_door_m3_180_deg_3mm/.metadata.yml | 12 + .../randell/Door_Hinges/.metadata.yml | 21 + .../randell/Microswitch_Endstop/.metadata.yml | 11 + .../raymondh/LargeSpoolHolders/.metadata.yml | 9 + .../Kirigami_LED_Bed_Front/.metadata.yml | 9 + .../MKS_CANable_Pro_mount/.metadata.yml | 18 + .../rpi_7in_display_mount/.metadata.yml | 15 + .../richardjm/adxl-chain/.metadata.yml | 14 + .../richardjm/back-plate/.metadata.yml | 13 + .../richardjm/led-mounts/.metadata.yml | 13 + .../richardjm/picam-corner/.metadata.yml | 9 + .../richardjm/snap-latch-2020/.metadata.yml | 13 + .../rngSplat/SW_Deck_Plate/.metadata.yml | 8 + .../.metadata.yml | 16 + .../.metadata.yml | 10 + .../Cable_management_duct/.metadata.yml | 10 + .../.metadata.yml | 14 + .../.metadata.yml | 9 + .../ab_plug_microfit_1x4/.metadata.yml | 11 + .../samwiseg0/corner_cable_hide/.metadata.yml | 11 + .../esp8266_nodemcu_din_mount/.metadata.yml | 11 + .../extrusion_thermistor_mount/.metadata.yml | 13 + .../lrs_screw_terminal_cover/.metadata.yml | 15 + .../.metadata.yml | 11 + .../voyager_gtx_din_mount/.metadata.yml | 12 + .../scanlory/clip_on_door_frame/.metadata.yml | 14 + printer_mods/slitte/PCB_Probe/.metadata.yml | 11 + printer_mods/slitte/ssd_bracket/.metadata.yml | 13 + .../sloscotty/SW_Wall_Plate/.metadata.yml | 12 + .../TopHat_Cam_Extension/.metadata.yml | 23 + .../Orbiter-Clockwork/.metadata.yml | 18 + .../Octopus_DIN_Rail_bracket/.metadata.yml | 11 + .../.metadata.yml | 20 + .../.metadata.yml | 11 + printer_mods/tallman5/z-locks/.metadata.yml | 11 + .../DIN_Rail_2020_holder/.metadata.yml | 8 + .../DIN_Rail_SKR_1.3_90deg/.metadata.yml | 7 + printer_mods/tameike/Jetpack_V0/.metadata.yml | 7 + .../V0_TR_Mounting_Frame/.metadata.yml | 7 + .../tayto-chip/skirt_switch_mod/.metadata.yml | 9 + .../AB_dial_indicator_mount/.metadata.yml | 12 + printer_mods/teookie/skr_brace/.metadata.yml | 12 + printer_mods/th0mpy/beefy-din/.metadata.yml | 20 + .../.metadata.yml | 10 + .../mount_for_umbilical/.metadata.yml | 14 + .../warriorofwire/slenderfan/.metadata.yml | 11 + .../extrusion_backers/.metadata.yml | 22 + .../Deck_Panel_Support_Clips/.metadata.yml | 12 + .../Stealthburner_CW1_PCB_Cover/.metadata.yml | 12 + .../wrez/astrodyne-inlet/.metadata.yml | 17 + .../xbst_/ADXL345_V0_Mount/.metadata.yml | 8 + printer_mods/xbst_/Bed_Hinge/.metadata.yml | 10 + printer_mods/xbst_/Duct_Mount/.metadata.yml | 10 + printer_mods/xbst_/DuetZero/.metadata.yml | 10 + .../Easy_Access_Rear_Panels_v0/.metadata.yml | 8 + printer_mods/xbst_/Flat_Skirts/.metadata.yml | 7 + .../xbst_/HOYMK_SSR_Mount/.metadata.yml | 7 + .../xbst_/Hat_LED_Mount/.metadata.yml | 8 + printer_mods/xbst_/LED_Holder/.metadata.yml | 9 + .../xbst_/Max31865_DIN_Mount/.metadata.yml | 9 + .../xbst_/Omron_DIN_Mount/.metadata.yml | 8 + .../xbst_/Relay_DIN_Mount/.metadata.yml | 8 + .../xbst_/V0_Electronic_Panel/.metadata.yml | 8 + printer_mods/xbst_/V0_M4_Mod/.metadata.yml | 8 + printer_mods/xbst_/V0_Picam/.metadata.yml | 8 + .../V0_Screw_Front_Hinge_Mod/.metadata.yml | 7 + .../xbst_/V0_Skirt_Buttons/.metadata.yml | 9 + .../V2.4_Fanless_Middle_Skirt/.metadata.yml | 7 + .../xbst_/V2.4_Skirt_Buttons/.metadata.yml | 12 + printer_mods/xbst_/ZipClip_v0/.metadata.yml | 7 + .../Single_Panel_Magnet_Mount/.metadata.yml | 11 + .../vsw_more_robust_belt_paths/.metadata.yml | 18 + .../yeri/V0_Magnetic_Panels/.metadata.yml | 8 + printer_mods/yeri/V1_3Z/.metadata.yml | 15 + .../zruncho/V0_No_Drop_Nuts/.metadata.yml | 18 + 412 files changed, 5851 insertions(+), 514 deletions(-) delete mode 100644 .github/workflows/ci-build.yml create mode 100644 .github/workflows/pull_request_ci.yml create mode 100644 .github/workflows/push_main_ci.yml create mode 100644 printer_mods/1-0-R/handle/.metadata.yml create mode 100644 printer_mods/120decibell/exhaust_housing_side_entry/.metadata.yml create mode 100644 printer_mods/120decibell/huvud_chain_mount/.metadata.yml create mode 100644 printer_mods/3dpandme/Fannypack_zero/.metadata.yml create mode 100644 printer_mods/3dpandme/Thermistor_holder_zero/.metadata.yml create mode 100644 printer_mods/3vilson/V0.1_Skirt_Holes/.metadata.yml create mode 100644 printer_mods/3vilson/V0.1_Skirt_Inlet/.metadata.yml create mode 100644 printer_mods/42bios/LED_mount/.metadata.yml create mode 100644 printer_mods/42bios/corner_panel_clip_cable/.metadata.yml create mode 100644 printer_mods/42bios/exhaust_filter_housing_side/.metadata.yml create mode 100644 printer_mods/42bios/relay_mount/.metadata.yml create mode 100644 printer_mods/Akio/cable_routing_z_belt_cover/.metadata.yml create mode 100644 printer_mods/AlexanderT-Moss/270-Clamping-Hinges/.metadata.yml create mode 100644 printer_mods/Andre/Mini_Afterburner_ADXL345_Mount/.metadata.yml create mode 100644 printer_mods/Andre/Mini_Afterburner_Strain_Relief/.metadata.yml create mode 100644 printer_mods/Andre/Revo_Nozzle_Skirt_Trident/.metadata.yml create mode 100644 printer_mods/Andre/V0_Neopixel_Front_Bed_Mount/.metadata.yml create mode 100644 printer_mods/Backenfutter/Mount_for_Electreeks_Camera/.metadata.yml create mode 100644 printer_mods/Badnoob/AB-BN/.metadata.yml create mode 100644 printer_mods/Badnoob/ABBN_for_Stock/.metadata.yml create mode 100644 printer_mods/Badnoob/Precision_AB_Drive/.metadata.yml create mode 100644 printer_mods/Badnoob/Rail_Alignment/.metadata.yml create mode 100644 printer_mods/Baltojikale/LoudOwl_aka_Stabby/.metadata.yml create mode 100644 printer_mods/BladeScraper-Designs/CornerPanel_SpoolHolder/.metadata.yml create mode 100644 printer_mods/BladeScraper-Designs/Horizontal-Spool-Holder/.metadata.yml create mode 100644 printer_mods/BladeScraper-Designs/Microswitch_Pod_With_Conector/.metadata.yml create mode 100644 printer_mods/Blamm/lrs-100/.metadata.yml create mode 100644 printer_mods/BlueBear/Deck_Panel_Backpack/.metadata.yml create mode 100644 printer_mods/BlueBear/Wago_221_mount/.metadata.yml create mode 100644 printer_mods/BlueBear/Ziptie_Mount/.metadata.yml create mode 100644 printer_mods/Boingomw/Wago_mount/.metadata.yml create mode 100644 printer_mods/Bondtech/Mini-After-LGX-Lite/.metadata.yml create mode 100644 printer_mods/ByteChild/2_Channel_Relay_DIN_Rail_Bracket/.metadata.yml create mode 100644 printer_mods/ByteChild/ESP32_DIN_Rail_Bracket/.metadata.yml create mode 100644 printer_mods/CannedBass/PITFT50_45_degree_mount/.metadata.yml create mode 100644 printer_mods/CannedBass/Trident_Bed_Fans/.metadata.yml create mode 100644 printer_mods/Ch4rlesB/V0_Handles_Slim/.metadata.yml create mode 100644 printer_mods/Chaoticlab/Tool_free_tensioner/.metadata.yml create mode 100644 printer_mods/ChenTheDesignMaker/Z_Belt_Clip/.metadata.yml create mode 100644 printer_mods/D4rkCelerity/Raspberry_Pi_Zero_Bracket/.metadata.yml create mode 100644 printer_mods/DC67/plug_panel_schaffner/.metadata.yml create mode 100644 printer_mods/DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets/.metadata.yml create mode 100644 printer_mods/DaGlo/Voron_V0_MW_PS_Bracket/.metadata.yml create mode 100644 printer_mods/DaGlo/Voron_V0_SSR_Mount/.metadata.yml create mode 100644 printer_mods/DaGrooch13/Tophat_Exhaust_Filter/.metadata.yml create mode 100644 printer_mods/DaStivi/the_Cephalopods_limb/.metadata.yml create mode 100644 printer_mods/Dan88/V0skirt/.metadata.yml create mode 100644 printer_mods/Daten/Voron_2.4_Revo_Nozzle_Holder/.metadata.yml create mode 100644 printer_mods/DerekBackus/LED_Holder/.metadata.yml create mode 100644 printer_mods/DerekBackus/Right_Skirt_Switch/.metadata.yml create mode 100644 printer_mods/Derpimus/Block_handle_v0.1/.metadata.yml create mode 100644 printer_mods/DorjeDorf/Duet_3_3HC_Din_Bracket/.metadata.yml create mode 100644 printer_mods/DorjeDorf/Duet_3_6HC_Din_Bracket/.metadata.yml create mode 100644 printer_mods/Dr-Info/corner_cable_cover_with_drop_down_holes/.metadata.yml create mode 100644 printer_mods/DrGhetto/GhettoPanels/.metadata.yml create mode 100644 printer_mods/ElPoPo/RemovableDoors/.metadata.yml create mode 100644 printer_mods/Electroleon/U2C_Mounting/.metadata.yml create mode 100644 printer_mods/Ellis/15x15_Drag_Chain_End/.metadata.yml create mode 100644 printer_mods/Ellis/Badge_Retractor_Mount/.metadata.yml create mode 100644 printer_mods/Ellis/Bed_Fans/.metadata.yml create mode 100644 printer_mods/Ellis/Short_Z_Joints/.metadata.yml create mode 100644 printer_mods/Ellis/Single_MGN9H_Carriage/.metadata.yml create mode 100644 printer_mods/Empusas/BTT_Filament_Motion_Sensor_Mount/.metadata.yml create mode 100644 printer_mods/Empusas/PowerSkirt_FN284-10-06/.metadata.yml create mode 100644 printer_mods/Empusas/Terminal_Blocks_NC933_SPL-62/.metadata.yml create mode 100644 printer_mods/Fiction/C270_mount/.metadata.yml create mode 100644 printer_mods/Fiction/Crossrail/.metadata.yml create mode 100644 printer_mods/Fiction/Exhaust_cover/.metadata.yml create mode 100644 printer_mods/Fiction/Exhaust_cover_SFS/.metadata.yml create mode 100644 printer_mods/Fiction/LGX_Lite_toolhead_PCB_mount/.metadata.yml create mode 100644 printer_mods/FreeformFez/FilteredPower/.metadata.yml create mode 100644 printer_mods/GSL12/pocketwatch_nema17/.metadata.yml create mode 100644 printer_mods/GadgetAngel/Bed_Support_Alignment_Tools/.metadata.yml create mode 100644 printer_mods/GadgetAngel/Cricut_Voron_Logos/.metadata.yml create mode 100644 printer_mods/Galvanic/Bowden_Tube_Guide/.metadata.yml create mode 100644 printer_mods/GiulianoM/FlyF407ZG/.metadata.yml create mode 100644 printer_mods/Gizzle/ender-3_(pro)_switchwire/.metadata.yml create mode 100644 printer_mods/Hobson318/Belt_Tension_Wrench/.metadata.yml create mode 100644 printer_mods/Hobson318/Klipper_Expander_Mount/.metadata.yml create mode 100644 printer_mods/Iakabos/C920_mount/.metadata.yml create mode 100644 printer_mods/Iakabos/V0_beltchain/.metadata.yml create mode 100644 printer_mods/JD/RefillPlease/.metadata.yml create mode 100644 printer_mods/JJFX/CRTouch_Snap_Mount/.metadata.yml create mode 100644 printer_mods/JNP/Back-Door/.metadata.yml create mode 100644 printer_mods/JNP/Deck_Panel_Rear/.metadata.yml create mode 100644 printer_mods/JNP/Drawer/.metadata.yml create mode 100644 printer_mods/JNP/Front-Door/.metadata.yml create mode 100644 printer_mods/JNP/HEPA-Filter/.metadata.yml create mode 100644 printer_mods/JNP/Mid-Panel/.metadata.yml create mode 100644 printer_mods/JNP/Neopixel-Y_Rails/.metadata.yml create mode 100644 printer_mods/JNP/Side-Panels/.metadata.yml create mode 100644 printer_mods/Jasrags/sw_fee_slot_filament_passthrough/.metadata.yml create mode 100644 printer_mods/JeremyRuhland/V2.4_Plug_Panel_Generic_Combo/.metadata.yml create mode 100644 printer_mods/Jon/1515_led_mount/.metadata.yml create mode 100644 printer_mods/Jon/adxl345_skirt_keystone/.metadata.yml create mode 100644 printer_mods/JosAr/Klicky-Probe/.metadata.yml create mode 100644 printer_mods/KenadyDwag44/sw_lightbar/.metadata.yml create mode 100644 printer_mods/KevinAkaSam/VEFACH/.metadata.yml create mode 100644 printer_mods/KiloQubit/V0_reverse_bowden_mount/.metadata.yml create mode 100644 printer_mods/KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts/.metadata.yml create mode 100644 printer_mods/KiloQubit/trident_schurter_power_inlet/.metadata.yml create mode 100644 printer_mods/Koios/6mm_Glass/.metadata.yml create mode 100644 printer_mods/Koios/C920_Mount/.metadata.yml create mode 100644 printer_mods/Koios/LED_Mounts/.metadata.yml create mode 100644 printer_mods/Koios/V0_C920_Tophat_Mount/.metadata.yml create mode 100644 printer_mods/Kosh42EFG/kirigami_bed_front/.metadata.yml create mode 100644 printer_mods/Kruppes/Closed_Bottom/.metadata.yml create mode 100644 printer_mods/Kruppes/Deck_Panel_inserts_logo/.metadata.yml create mode 100644 printer_mods/Kruppes/Tension_Meter/.metadata.yml create mode 100644 printer_mods/Kyleisah/CableGator/.metadata.yml create mode 100644 printer_mods/LJ/Scrubby/.metadata.yml create mode 100644 printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts/.metadata.yml create mode 100644 printer_mods/LoCoCNC/3mm_tophat_panel_parts/.metadata.yml create mode 100644 printer_mods/LoCoCNC/MGN7H_Shims/.metadata.yml create mode 100644 printer_mods/LoCoCNC/Mosquito_PTFE_Cutting_Jig/.metadata.yml create mode 100644 printer_mods/LoCoCNC/Strain_Relief_w_Microfit/.metadata.yml create mode 100644 printer_mods/LoCoCNC/ssr_strap/.metadata.yml create mode 100644 printer_mods/LoCoCNC/wire_grommets/.metadata.yml create mode 100644 printer_mods/LoganFraser/ComboInlet/.metadata.yml create mode 100644 printer_mods/LoganFraser/HorseshoeSpoolHolder/.metadata.yml create mode 100644 printer_mods/LoganFraser/PiPlate/.metadata.yml create mode 100644 printer_mods/LoganFraser/TridentInvertedElectronics/.metadata.yml create mode 100644 printer_mods/LoganFraser/WagoMounts/.metadata.yml create mode 100644 printer_mods/Long/Mantis_Dual_5015/.metadata.yml create mode 100644 printer_mods/Lukas/SSD1306_Case_Front_Cover/.metadata.yml create mode 100644 printer_mods/MCMBen/Voron0_Block_and_Tackle_Z_Belt/.metadata.yml create mode 100644 printer_mods/MSA/V0-Belt-tension-helper/.metadata.yml create mode 100644 printer_mods/MSiemons/TophatHingeV0.1/.metadata.yml create mode 100644 printer_mods/Mac10goesBRRRT/BTT_PiTFT/.metadata.yml create mode 100644 printer_mods/Majarspeed/Hartk_Mount_Galileo/.metadata.yml create mode 100644 printer_mods/MakeALeft/Switchwire_Front_Grill/.metadata.yml create mode 100644 printer_mods/MasturMynd/Stealth_Zero/.metadata.yml create mode 100644 printer_mods/MathematicalPotato/v0.1_belted_z_drive/.metadata.yml create mode 100644 printer_mods/Maverick/MiniSB_LGX_Lite/.metadata.yml create mode 100644 printer_mods/Maverick/MiniSB_Rapido/.metadata.yml create mode 100644 printer_mods/Maverick/MiniSB_Sharkfin/.metadata.yml create mode 100644 printer_mods/Maverick/V0.2_Handles/.metadata.yml create mode 100644 printer_mods/Maverick/V0.2_Stealth_Skirts/.metadata.yml create mode 100644 printer_mods/Mckurt/Switchwire_Y_Belt_Tensioner/.metadata.yml create mode 100644 printer_mods/Mellow/V0_Fly-Gemini/.metadata.yml create mode 100644 printer_mods/MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail/.metadata.yml create mode 100644 printer_mods/Minsekt/Rear_Umbilical/.metadata.yml create mode 100644 printer_mods/MrBean66/SKR_PRO_Mount/.metadata.yml create mode 100644 printer_mods/MrDespair/MiniAB_Pinda/.metadata.yml create mode 100644 printer_mods/Mrgl-Mrgl/LGX_Lite_Mount/.metadata.yml create mode 100644 printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/.metadata.yml create mode 100644 printer_mods/Nomsplease/60mm_Shaft_Jig/.metadata.yml create mode 100644 printer_mods/Nomsplease/V0_Mods/duet_wifi_mount/.metadata.yml create mode 100644 printer_mods/Nomsplease/V0_Mods/led_mounts/.metadata.yml create mode 100644 printer_mods/Nomsplease/V0_Mods/panel_mounts/.metadata.yml create mode 100644 printer_mods/Nomsplease/V0_Mods/pi_zero_camera_mount/.metadata.yml create mode 100644 printer_mods/Nomsplease/V0_Mods/pocket_watch_rear_relocation/.metadata.yml create mode 100644 printer_mods/Oakman/BTT_24V_UPS_Metal_DIN_Mount/.metadata.yml create mode 100644 printer_mods/Oakman/FYSETC_Spider_Metal_DIN_Mount/.metadata.yml create mode 100644 printer_mods/Oakman/RPI_Metal_DIN_Mount/.metadata.yml create mode 100644 printer_mods/OboMaker3D/C17-EXT-CARTRIDGE/.metadata.yml create mode 100644 printer_mods/OboMaker3D/C17-EXT/.metadata.yml create mode 100644 printer_mods/Phalanx/Other-V2-Idlers/.metadata.yml create mode 100644 printer_mods/Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch/.metadata.yml create mode 100644 printer_mods/Polar-Ted/V0_Two_Piece_Back_Panel/.metadata.yml create mode 100644 printer_mods/Polared/Power_Inlet_w_Keystone_Insert/.metadata.yml create mode 100644 printer_mods/Printopal/Magnetic_top_panel/.metadata.yml create mode 100644 printer_mods/PsychoShaft/C92X_PsycHoShafts_Mount/.metadata.yml create mode 100644 printer_mods/QuackProfit/V0-Adafruit-Y_Rails/.metadata.yml create mode 100644 printer_mods/Rhastlyn/60mmFanCover/.metadata.yml create mode 100644 printer_mods/Rhastlyn/WansviewCameraMount/.metadata.yml create mode 100644 printer_mods/RockNLol/RockNRoll/.metadata.yml create mode 100644 printer_mods/ScramblerUSA/SideSkirtPowerSwitch/.metadata.yml create mode 100644 printer_mods/See1807/Voron_V0_Exhaust_and_LED_Mod/.metadata.yml create mode 100644 printer_mods/Shiftingtech/Trident_dual_power_switch/.metadata.yml create mode 100644 printer_mods/ShinyPants/Orange_Pi_3_LTS_DIN/.metadata.yml create mode 100644 printer_mods/Shteeeeeve/V01-LED-Tophat/.metadata.yml create mode 100644 printer_mods/Slidr/PanzerBalls2.4/.metadata.yml create mode 100644 printer_mods/Slidr/PanzerChain2.4/.metadata.yml create mode 100644 printer_mods/Spaghetti-Bolognese/LCD_case_mod/.metadata.yml create mode 100644 printer_mods/Spaghetti-Bolognese/Z_drive_motor_mount/.metadata.yml create mode 100644 printer_mods/StvPtrsn/320mm_Build/.metadata.yml create mode 100644 printer_mods/StvPtrsn/Keystone_Jack_Filtered_Mains_Panel/.metadata.yml create mode 100644 printer_mods/StvPtrsn/Parts_Jigs_and_Mods/.metadata.yml create mode 100644 printer_mods/StvPtrsn/Side_Fan_Support_No_Tape/.metadata.yml create mode 100644 printer_mods/Takuya/USBCameraMount/.metadata.yml create mode 100644 printer_mods/TheSquiffy/V0_Belts_holder/.metadata.yml create mode 100644 printer_mods/TiagoBarata/Logitech_C270_Mount/.metadata.yml create mode 100644 printer_mods/Tircown/DIN_mount_RS-15-5/.metadata.yml create mode 100644 printer_mods/Tircown/Display_mount_5inch/.metadata.yml create mode 100644 printer_mods/Tircown/Raspberry_plug_panel/.metadata.yml create mode 100644 printer_mods/Tircown/V01_skirt_buttons/.metadata.yml create mode 100644 printer_mods/Triano/Ender_3Pro_Switchwire/.metadata.yml create mode 100644 printer_mods/Ultrawaffles/Ender_3_to_SW/.metadata.yml create mode 100644 printer_mods/VinnyCordeiro/RGB_LED_grid_for_SB/.metadata.yml create mode 100644 printer_mods/Weaslus/Electronics-Bay-Seperator/.metadata.yml create mode 100644 printer_mods/ZZP8202/Pull-out_electrical_store/.metadata.yml create mode 100644 printer_mods/Zen3D/V0_1515_T-nut/.metadata.yml create mode 100644 printer_mods/Zen3D/V0_Handle/.metadata.yml create mode 100644 printer_mods/Zen3D/V0_MidPanel_HexPattern/.metadata.yml create mode 100644 printer_mods/Zen3D/V0_Skirt/.metadata.yml create mode 100644 printer_mods/aTinyShellScript/RS_PSU_DIN_Brackets/.metadata.yml create mode 100644 printer_mods/ademuri/Lights_Camera_Voron/.metadata.yml create mode 100644 printer_mods/aeresov/MeanWell_UHP_DIN_mount/.metadata.yml create mode 100644 printer_mods/aeresov/Raspberry_Pi_DIN_mount/.metadata.yml create mode 100644 printer_mods/aeresov/SKR_DIN_mount/.metadata.yml create mode 100644 printer_mods/aeresov/TL_filament_sensor_bracket/.metadata.yml create mode 100644 printer_mods/aeresov/cable_tie_DIN_mount/.metadata.yml create mode 100644 printer_mods/al3ph/analog_timer_mount/.metadata.yml create mode 100644 printer_mods/al3ph/filament_runout/.metadata.yml create mode 100644 printer_mods/al3ph/led_mount/.metadata.yml create mode 100644 printer_mods/al3ph/pl05_mount/.metadata.yml create mode 100644 printer_mods/alanho/BTT_PITFT50_v2_Mount/.metadata.yml create mode 100644 printer_mods/albert/IKEA_Dioder_Led_Mount/.metadata.yml create mode 100644 printer_mods/antoinecellerier/ds18b20-sensor-mount/.metadata.yml create mode 100644 printer_mods/ardichoke/v0-long-thumb-nut/.metadata.yml create mode 100644 printer_mods/arkeet/dti-mount/.metadata.yml create mode 100644 printer_mods/arkeet/magnet-fan-cover/.metadata.yml create mode 100644 printer_mods/arkeet/mgn12/.metadata.yml create mode 100644 printer_mods/arkeet/v0-dc-inlet/.metadata.yml create mode 100644 printer_mods/baccula/revo_skirt_nozzle_holder/.metadata.yml create mode 100644 printer_mods/beaugalbraith/Nova_Printhead/.metadata.yml create mode 100644 printer_mods/bobbleheed/Filament_Runout/.metadata.yml create mode 100644 printer_mods/bobbleheed/Magnetic_Panels/.metadata.yml create mode 100644 printer_mods/btp/Galileo_Switchwire_Chain_Mount/.metadata.yml create mode 100644 printer_mods/buzzdalf/connector_cover/.metadata.yml create mode 100644 printer_mods/buzzdalf/ender_switchwire_taller_z/.metadata.yml create mode 100644 printer_mods/buzzdalf/ytension/.metadata.yml create mode 100644 printer_mods/bythorsthunder/MGN9_Backers/.metadata.yml create mode 100644 printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf/.metadata.yml create mode 100644 printer_mods/chirpy/NozzleWiper/.metadata.yml create mode 100644 printer_mods/chirpy/RunoutUnklicky/.metadata.yml create mode 100644 printer_mods/chirpy/TipTophat/.metadata.yml create mode 100644 printer_mods/chri.kai.in/20x20mm_Profile_Covers/.metadata.yml create mode 100644 printer_mods/chri.kai.in/Angry_CAM_USB/.metadata.yml create mode 100644 printer_mods/chri.kai.in/Exhaust_Adapter_100mm/.metadata.yml create mode 100644 printer_mods/chrisrgonzales/270_degree_hinge/.metadata.yml create mode 100644 printer_mods/christophmueller/Phaetus_Dragonfly_BMO_Afterburner/.metadata.yml create mode 100644 printer_mods/claytono/2.4-extrusion-jig/.metadata.yml create mode 100644 printer_mods/claytono/fysetc-s6-v2-mount/.metadata.yml create mode 100644 printer_mods/claytono/v0-zip-tie-skirts/.metadata.yml create mode 100644 printer_mods/clee/Monster8_heatsert_mount/.metadata.yml create mode 100644 printer_mods/cmrny/v01_motor_panel_no_rub/.metadata.yml create mode 100644 printer_mods/conqueror433/Voron_Parts_Logo/.metadata.yml create mode 100644 printer_mods/conqueror433/Voron_V0.1_Parts_Logo/.metadata.yml create mode 100644 printer_mods/consibonsi/Y-Mod_SW_9mm/.metadata.yml create mode 100644 printer_mods/csch0/SW_FanMount_No_Tape/.metadata.yml create mode 100644 printer_mods/d3nny/mains_plug_panel_for_RND_165-00057/.metadata.yml create mode 100644 printer_mods/davidauvergne/Center_cable_management_duct/.metadata.yml create mode 100644 printer_mods/dePrintinator/HEPA_Filter_Exhaust/.metadata.yml create mode 100644 printer_mods/deepfriedheroin/v0_bed_wagos/.metadata.yml create mode 100644 printer_mods/deepfriedheroin/v0_power_wagos/.metadata.yml create mode 100644 printer_mods/deepfriedheroin/v2_bed_wagos/.metadata.yml create mode 100644 printer_mods/doubletrouble/V0_Skirt_Mod/.metadata.yml create mode 100644 printer_mods/eamars/stealthburner_crazy_dragon_toolhead/.metadata.yml create mode 100644 printer_mods/eddie/LED_Bar_Clip/.metadata.yml create mode 100644 printer_mods/eddie/V1.8_12mm_Z_Mod/.metadata.yml create mode 100644 printer_mods/edwardyeeks/Tridentified_V2.4_Power_Inlet/.metadata.yml create mode 100644 printer_mods/elcrni/Trident_Internal_Spool_Holder/.metadata.yml create mode 100644 printer_mods/elcrni/V2.4-Trident-Spool-Holders/.metadata.yml create mode 100644 printer_mods/evandepol/Crydom-GN-Guard/.metadata.yml create mode 100644 printer_mods/evandepol/Voron2.4-Cable-clamps/.metadata.yml create mode 100644 printer_mods/falo/lgx_lite_side_can/.metadata.yml create mode 100644 printer_mods/falo/magnetic_grill_cover/.metadata.yml create mode 100644 printer_mods/falo/toolhead_pcb_to_can/.metadata.yml create mode 100644 printer_mods/filotto78/6mm_slot_cover/.metadata.yml create mode 100644 printer_mods/gamebofh/door-panels/.metadata.yml create mode 100644 printer_mods/gauravmm/crazy_mozzie_cw2/.metadata.yml create mode 100644 printer_mods/gen2eng/z_carriage_stop_pass_through/.metadata.yml create mode 100644 printer_mods/geoffreyyoung/dual_rail_guide/.metadata.yml create mode 100644 printer_mods/geoffreyyoung/lgx/.metadata.yml create mode 100644 printer_mods/geoffreyyoung/spider_bracket/.metadata.yml create mode 100644 printer_mods/gerritwellen/manta-m8p-bracket/.metadata.yml create mode 100644 printer_mods/golas/v0-extended-tophat-hinge/.metadata.yml create mode 100644 printer_mods/golas/v0-trident-skirt-mix/.metadata.yml create mode 100644 printer_mods/hartk1213/Voron0.2_2.8_WaveshareDisplay/.metadata.yml create mode 100644 printer_mods/hartk1213/Voron0.2_Rear_Keystone_Skirt/.metadata.yml create mode 100644 printer_mods/hartk1213/Voron0_C14Inlet/.metadata.yml create mode 100644 printer_mods/hartk1213/Voron0_ExtendedLegs/.metadata.yml create mode 100644 printer_mods/hartk1213/Voron0_ExtrusionSkirt/.metadata.yml create mode 100644 printer_mods/hartk1213/Voron0_Hinged_Top_Hat/.metadata.yml create mode 100644 printer_mods/hartk1213/Voron0_MGN9C_X_Axis/.metadata.yml create mode 100644 printer_mods/hartk1213/Voron0_deck_panel_with_logo_and_VORON0/.metadata.yml create mode 100644 printer_mods/hartk1213/Voron0_display_dualcolor/.metadata.yml create mode 100644 printer_mods/hartk1213/Voron2.4_GE5C/.metadata.yml create mode 100644 printer_mods/hartk1213/Voron2.4_SexBolt_ZEndstop/.metadata.yml create mode 100644 printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/.metadata.yml create mode 100644 printer_mods/hartk1213/Voron2.4_Y_Endstop_Relocation/.metadata.yml create mode 100644 printer_mods/henrikssn/parametric_spool_holder/.metadata.yml create mode 100644 printer_mods/henrikssn/plug_panel_generic/.metadata.yml create mode 100644 printer_mods/hergtoler/exhaust_120mm_duct/.metadata.yml create mode 100644 printer_mods/hernsl/bottom_panel_mag_clip/.metadata.yml create mode 100644 printer_mods/hhammarstrand/afterburner_connector_cover_42STH20-1004AS/.metadata.yml create mode 100644 printer_mods/hijax_pl/corner_panel_clip/.metadata.yml create mode 100644 printer_mods/hijax_pl/din_rail_mount/.metadata.yml create mode 100644 printer_mods/hijax_pl/ender_compatible_controller_mount/.metadata.yml create mode 100644 printer_mods/hoschi/FYSETC_Spider_DIN_Mount/.metadata.yml create mode 100644 printer_mods/hymness1/10x11mm_chain_VSW/.metadata.yml create mode 100644 printer_mods/hymness1/Quickdraw_probe_Voron_Switchwire/.metadata.yml create mode 100644 printer_mods/iblue/TophatExtractor/.metadata.yml create mode 100644 printer_mods/jappaj/FanSaver/.metadata.yml create mode 100644 printer_mods/jasonc/Z_Idler_Shoulder_Bolt/.metadata.yml create mode 100644 printer_mods/jatson/plug_panel_schurter/.metadata.yml create mode 100644 printer_mods/jaysuk/4.3_fly_screen_mount/.metadata.yml create mode 100644 printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/.metadata.yml create mode 100644 printer_mods/jeoje/Molex_MLX_Microfit_Bed_Connector_Mount/.metadata.yml create mode 100644 printer_mods/jeoje/Sturdy_Handles/.metadata.yml create mode 100644 printer_mods/jeoje/Z_Chain_Guide_Thermistor_Mount/.metadata.yml create mode 100644 printer_mods/jgehrig/v0_lcdskirt/.metadata.yml create mode 100644 printer_mods/johanncc/Raspberry_Pi_Camera_Mount/.metadata.yml create mode 100644 printer_mods/joposter/v0_clippable_ledmounts/.metadata.yml create mode 100644 printer_mods/kageurufu/mgn12-euclid/.metadata.yml create mode 100644 printer_mods/khay/V2-200_4020_Electronics_Fan/.metadata.yml create mode 100644 printer_mods/khay/V2_3x_Keystone_Plugpanel/.metadata.yml create mode 100644 printer_mods/khay/micro_backplate/.metadata.yml create mode 100644 printer_mods/kirby/v0_sherpa_mini_direct_drive/.metadata.yml create mode 100644 printer_mods/lakai/Bruag_Skirts/.metadata.yml create mode 100644 printer_mods/leandromarceddu/PowerSkirt/.metadata.yml create mode 100644 printer_mods/littleferris/V0_Skirt_Inlet/.metadata.yml create mode 100644 printer_mods/madfabrications/Vertical_PSU_Mount/.metadata.yml create mode 100644 printer_mods/madros/V0_skirt_OLED/.metadata.yml create mode 100644 printer_mods/maximilian-foerg/AB_Turbo_Mod/.metadata.yml create mode 100644 printer_mods/maximilian-foerg/VSW_Double_60mm_Fan_Mount/.metadata.yml create mode 100644 printer_mods/mikepthomas/MKS_Mosfet_Mount/.metadata.yml create mode 100644 printer_mods/mjoaris/10x11_Cable_Chain_Endcaps/.metadata.yml create mode 100644 printer_mods/mjoaris/Mini12864_LCD_Mount_for_V2.4/.metadata.yml create mode 100644 printer_mods/mosher/m3_door_hinges/.metadata.yml create mode 100644 printer_mods/mpfl/V0.1_skirt_OLED/.metadata.yml create mode 100644 printer_mods/muradir/Zodiac_BMO_Stealthburner_Toolhead/.metadata.yml create mode 100644 printer_mods/natewalck/v1.8_Jigs/.metadata.yml create mode 100644 printer_mods/nhchiu/V0.1_Movable_Pulley_Z/.metadata.yml create mode 100644 printer_mods/nikolasbabetas/Neopixel_Holder/.metadata.yml create mode 100644 printer_mods/ommy/roller_brackets/.metadata.yml create mode 100644 printer_mods/oxno/rbp_zero_braket/.metadata.yml create mode 100644 printer_mods/padok/chain_anchor-ADXL345_mount/.metadata.yml create mode 100644 printer_mods/piet206/V1.8._Z_Rails_Mod/.metadata.yml create mode 100644 printer_mods/prasadp4009/SW_SB_CRTouch/.metadata.yml create mode 100644 printer_mods/quattroerik/front_door_m3_180_deg_3mm/.metadata.yml create mode 100644 printer_mods/randell/Door_Hinges/.metadata.yml create mode 100644 printer_mods/randell/Microswitch_Endstop/.metadata.yml create mode 100644 printer_mods/raymondh/LargeSpoolHolders/.metadata.yml create mode 100644 printer_mods/reQu1em00/Kirigami_LED_Bed_Front/.metadata.yml create mode 100644 printer_mods/reapola/MKS_CANable_Pro_mount/.metadata.yml create mode 100644 printer_mods/revnull/rpi_7in_display_mount/.metadata.yml create mode 100644 printer_mods/richardjm/adxl-chain/.metadata.yml create mode 100644 printer_mods/richardjm/back-plate/.metadata.yml create mode 100644 printer_mods/richardjm/led-mounts/.metadata.yml create mode 100644 printer_mods/richardjm/picam-corner/.metadata.yml create mode 100644 printer_mods/richardjm/snap-latch-2020/.metadata.yml create mode 100644 printer_mods/rngSplat/SW_Deck_Plate/.metadata.yml create mode 100644 printer_mods/roboticator24/4inch_touchscreen_mount_for_v2.4/.metadata.yml create mode 100644 printer_mods/rsheng118/BTT_octopus_DIN_vertical_mount/.metadata.yml create mode 100644 printer_mods/ryandam/Cable_management_duct/.metadata.yml create mode 100644 printer_mods/sammynorway/LGX-stealthburner-connector-cover/.metadata.yml create mode 100644 printer_mods/samwiseg0/4channel_relay_under_deck_mount/.metadata.yml create mode 100644 printer_mods/samwiseg0/ab_plug_microfit_1x4/.metadata.yml create mode 100644 printer_mods/samwiseg0/corner_cable_hide/.metadata.yml create mode 100644 printer_mods/samwiseg0/esp8266_nodemcu_din_mount/.metadata.yml create mode 100644 printer_mods/samwiseg0/extrusion_thermistor_mount/.metadata.yml create mode 100644 printer_mods/samwiseg0/lrs_screw_terminal_cover/.metadata.yml create mode 100644 printer_mods/samwiseg0/microfit_2x3_skirt_connector_adxl/.metadata.yml create mode 100644 printer_mods/samwiseg0/voyager_gtx_din_mount/.metadata.yml create mode 100644 printer_mods/scanlory/clip_on_door_frame/.metadata.yml create mode 100644 printer_mods/slitte/PCB_Probe/.metadata.yml create mode 100644 printer_mods/slitte/ssd_bracket/.metadata.yml create mode 100644 printer_mods/sloscotty/SW_Wall_Plate/.metadata.yml create mode 100644 printer_mods/sloscotty/TopHat_Cam_Extension/.metadata.yml create mode 100644 printer_mods/spacelab2021/Orbiter-Clockwork/.metadata.yml create mode 100644 printer_mods/sse018/Octopus_DIN_Rail_bracket/.metadata.yml create mode 100644 printer_mods/strayr/stealthburner_creality_toolhead/.metadata.yml create mode 100644 printer_mods/sttts/Waveshare-5.5-inch-HDMI-AMOLED/.metadata.yml create mode 100644 printer_mods/tallman5/z-locks/.metadata.yml create mode 100644 printer_mods/tameike/DIN_Rail_2020_holder/.metadata.yml create mode 100644 printer_mods/tameike/DIN_Rail_SKR_1.3_90deg/.metadata.yml create mode 100644 printer_mods/tameike/Jetpack_V0/.metadata.yml create mode 100644 printer_mods/tameike/V0_TR_Mounting_Frame/.metadata.yml create mode 100644 printer_mods/tayto-chip/skirt_switch_mod/.metadata.yml create mode 100644 printer_mods/teookie/AB_dial_indicator_mount/.metadata.yml create mode 100644 printer_mods/teookie/skr_brace/.metadata.yml create mode 100644 printer_mods/th0mpy/beefy-din/.metadata.yml create mode 100644 printer_mods/togi/exhaust_housing_side_fitting/.metadata.yml create mode 100644 printer_mods/top_gun_de/mount_for_umbilical/.metadata.yml create mode 100644 printer_mods/warriorofwire/slenderfan/.metadata.yml create mode 100644 printer_mods/whoppingpochard/extrusion_backers/.metadata.yml create mode 100644 printer_mods/wile-e1/Deck_Panel_Support_Clips/.metadata.yml create mode 100644 printer_mods/wile-e1/Stealthburner_CW1_PCB_Cover/.metadata.yml create mode 100644 printer_mods/wrez/astrodyne-inlet/.metadata.yml create mode 100644 printer_mods/xbst_/ADXL345_V0_Mount/.metadata.yml create mode 100644 printer_mods/xbst_/Bed_Hinge/.metadata.yml create mode 100644 printer_mods/xbst_/Duct_Mount/.metadata.yml create mode 100644 printer_mods/xbst_/DuetZero/.metadata.yml create mode 100644 printer_mods/xbst_/Easy_Access_Rear_Panels_v0/.metadata.yml create mode 100644 printer_mods/xbst_/Flat_Skirts/.metadata.yml create mode 100644 printer_mods/xbst_/HOYMK_SSR_Mount/.metadata.yml create mode 100644 printer_mods/xbst_/Hat_LED_Mount/.metadata.yml create mode 100644 printer_mods/xbst_/LED_Holder/.metadata.yml create mode 100644 printer_mods/xbst_/Max31865_DIN_Mount/.metadata.yml create mode 100644 printer_mods/xbst_/Omron_DIN_Mount/.metadata.yml create mode 100644 printer_mods/xbst_/Relay_DIN_Mount/.metadata.yml create mode 100644 printer_mods/xbst_/V0_Electronic_Panel/.metadata.yml create mode 100644 printer_mods/xbst_/V0_M4_Mod/.metadata.yml create mode 100644 printer_mods/xbst_/V0_Picam/.metadata.yml create mode 100644 printer_mods/xbst_/V0_Screw_Front_Hinge_Mod/.metadata.yml create mode 100644 printer_mods/xbst_/V0_Skirt_Buttons/.metadata.yml create mode 100644 printer_mods/xbst_/V2.4_Fanless_Middle_Skirt/.metadata.yml create mode 100644 printer_mods/xbst_/V2.4_Skirt_Buttons/.metadata.yml create mode 100644 printer_mods/xbst_/ZipClip_v0/.metadata.yml create mode 100644 printer_mods/xceled/Single_Panel_Magnet_Mount/.metadata.yml create mode 100644 printer_mods/yenda/vsw_more_robust_belt_paths/.metadata.yml create mode 100644 printer_mods/yeri/V0_Magnetic_Panels/.metadata.yml create mode 100644 printer_mods/yeri/V1_3Z/.metadata.yml create mode 100644 printer_mods/zruncho/V0_No_Drop_Nuts/.metadata.yml diff --git a/.github/PULL_REQUEST_TEMPLATE.md b/.github/PULL_REQUEST_TEMPLATE.md index 01e79c319..e856e4f6b 100644 --- a/.github/PULL_REQUEST_TEMPLATE.md +++ b/.github/PULL_REQUEST_TEMPLATE.md @@ -1,57 +1,73 @@ + + +### Which mods/configurations/profiles are added by this PR? + +### How was it tested? + +### Any background context you want to provide? + +### Screenshots (if appropriate) + +### ⚠️⚠️**PLEASE CAREFULLY READ AND APPLY THE RULES BELOW**⚠️⚠️ + * [ ] The mod, firmware configuration or slicer profile is in the correct category folder. Printable mods go to `printer_mods/`, firmware configurations go to `firmware_configurations/`, slicer profiles go to `slicer_profiles/`. Create a subfolder with your name, and place the mods in a subfolder with - a descriptive name within that folder, e.g.: `/printer_mods/FHeilmann/flux_capacitor` + a descriptive name within that folder, e.g.: `/printer_mods/FHeilmann/flux_capacitor`. * [ ] Folder and file naming: - * Folders and filenames shouldn't contain spaces. Only letters `a-zA-Z`, numbers `0-9`, underscores `_`, hyphens `-` and periods `.` - * Primary color: `part_xyz.stl` - * Accent color: `[a]_part_xyz.stl` - * Opaque color (Blocks light): `[o]_part_xyz.stl` - * Clear/transparent color (Allows light): `[c]_part_xyz.stl` - * Quantity, if more than one is needed: `part_xyz_x4.stl` + * Folders and filenames MUST NOT contain spaces. Only letters `a-zA-Z`, numbers `0-9`, underscores `_`, hyphens `-` and periods `.` + * You may use the following filenames to indicate the color and quantity of your prints: + * Primary color: `part_xyz.stl` + * Accent color: `[a]_part_xyz.stl` + * Opaque color (Blocks light): `[o]_part_xyz.stl` + * Clear/transparent color (Allows light): `[c]_part_xyz.stl` + * Quantity, if more than one is needed: `part_xyz_x4.stl` + * [ ] Each mod folder must contain a `.metadata.yml` file with information about the mod. + Refer to the following template for the required and optional contents: + ```yaml + --- + title: Mod Title # required + description: "This mod does awesome things with awesome printers!" # required + mod_version: 1 # required + printer_compatibility: # required, one or more of the options listed below + - V0 + - V1 + - V2 + - VSW + - Trident + - Legacy + cad: # required: At least 1 CAD file for your mod, path relative to your mod folder + - CAD/my_step_file_1.step + - CAD/my_f360_file_1.f360 + images: # optional, image files provided with your mod, path relative to your mod folder + - images/mods_site_card_image.png + - images/side_view.png + - images/install_guide.png + discord_username: discord_person # optional, your discord username + ``` * [ ] For each mod, add a small `README.md` file to its folder with a short description of what the mod accomplishes. This readme can be used to add pictures, give assembly instructions or specify a bill of materials if the mod requires additional hardware. - * [ ] The PR modifies the top-level `README.md` of the category folder adding the - contribution to the table. Read the top part of the file for instructions on how - to do this. Please preserve the alphabetical ordering while adding new rows. Make sure - to fill out the compatibility matrix to indicate which versions of the Voron printer - the submission is compatible with. - * [ ] The mod/configuration/profile has been tested by the person submitting the mod - and/or other Voron users. Make sure to add information about how the mod was tested below. - * [ ] The mod is not merely a slight modification of an official Voron part, configuration - or profile (i.e. an official Voron part with a few mm added or removed or a slicer profile - which only modifies a few values). *(When in doubt, contact one of the admins in the + * [ ] The mod/configuration/profile has been **TESTED** by the person submitting the mod + and/or other Voron users. Make sure to add information about how the mod was tested below. + * [ ] The mod is **NOT** merely a slight modification of an official Voron part, configuration + or profile (i.e. an official Voron part with a few mm added or removed or a slicer profile + which only modifies a few values). *(When in doubt, contact one of the admins in the Voron discord before submitting the PR)* - * [ ] Submitted STLs are printable without support. *(If the mod does not meet this criterion - join the Voron discord and ask the other users for advice on how to modify the mod such - that it does not require supports)* - * [ ] Submitted STL files are not corrupt. *(This can be tested by opening the STL in PrusaSlicer + * [ ] Submitted STLs are **printable without support and oriented properly**. If supports can't be avoided, + the model must include break-away supports. + * [ ] Submitted STL files are **not corrupt**. *(This can be tested by opening the STL in PrusaSlicer and checking if mesh errors are reported.)* - * [ ] Submitted STL files are oriented and scaled properly for printing. - * [ ] Submission includes a CAD file in the form of a `.STEP` or `.SCAD` file - * [ ] Submitted firmware configs or slicer profiles contain no sensitive data (e.g. API keys). - - - -#### Which mods/configurations/profiles are added by this PR? - -#### How was it tested? - -#### Any background context you want to provide? - -#### Screenshots (if appropriate) - -#### Further notes + * [ ] Submissions **must** include a CAD file in the form of a `.STEP`, `.F360` or `.SCAD` file + * [ ] Submitted firmware configs or slicer profiles **contain no sensitive data** (e.g. API keys). \ No newline at end of file diff --git a/.github/workflows/ci-build.yml b/.github/workflows/ci-build.yml deleted file mode 100644 index 67522f86a..000000000 --- a/.github/workflows/ci-build.yml +++ /dev/null @@ -1,48 +0,0 @@ -name: Voron CI - -on: - push: - branches: [ master ] - pull_request: - branches: [ master ] - -jobs: - build: - - runs-on: ubuntu-latest - - strategy: - matrix: - node-version: [14.x] - env: - GIT_BRANCH: ${{ github.head_ref }} - GIT_PR_BASE_BRANCH: ${{ github.base_ref }} - GIT_PULL_REQUEST: ${{ github.event.number }} - steps: - - name: Checkout Actions - uses: actions/checkout@v3 - - - name: Cache Folder - id: cache-folder - uses: actions/cache@v3 - with: - path: ci_cache - key: voron-ci - # - name: Set ENV variable - # run: echo "::set-env name=GIT_BRANCH::${GIT_BRANCH:-$(echo $GITHUB_REF | awk 'BEGIN { FS = "/" } ; { print $3 }')}" - - name: Print Travis ENV vars - run: | - echo "GIT_BRANCH: ${GIT_BRANCH}" - echo "GIT_PULL_REQUEST: ${GIT_PULL_REQUEST}" - - name: Setup NPM - uses: actions/setup-node@v3 - with: - node-version: ${{ matrix.node-version }} - - name: Install NPM scripts - run: | - npm init -y - npm install --global remark-cli remark-validate-links - - name: Execute CI - run: | - git clone https://github.com/VoronDesign/GithubScripts.git .github_scripts - /bin/bash ./.github_scripts/workflows/ci-build.sh diff --git a/.github/workflows/pull_request_ci.yml b/.github/workflows/pull_request_ci.yml new file mode 100644 index 000000000..38c430f87 --- /dev/null +++ b/.github/workflows/pull_request_ci.yml @@ -0,0 +1,85 @@ +name: VoronUsers PR CI +run-name: "#${{github.event.number}} - ${{github.event.pull_request.title}}" +on: + pull_request: + types: [opened, reopened, synchronize] +concurrency: + group: ${{ github.ref }} + cancel-in-progress: true +permissions: + pull-requests: write +jobs: + checkout_check_whitespace: + name: Checkout & Check Whitespace + uses: VoronDesign/.github/.github/workflows/pr_checkout_check_whitespace_cache.yml@v2 + with: + branch: ${{ github.ref }} + cache-key: file-cache-${{github.sha}} + cache-directory: pr-files + setup_python: + needs: [checkout_check_whitespace] + name: Prepare python environment + if: ${{ needs.checkout_check_whitespace.outputs.stl == 'true' }} + uses: VoronDesign/.github/.github/workflows/prepare-environment.yml@v2 + with: + apt-packages: "admesh, libadmesh-dev" + pip-packages: "admesh imagekitio git+https://github.com/ChristophSchranz/Tweaker-3.git" + python-cache-key: voronusers-python-cache + check_stls: + name: Check STL corruption + needs: [setup_python] + if: ${{ needs.checkout_check_whitespace.outputs.stl == 'true' }} + uses: VoronDesign/.github/.github/workflows/check-stl-corruption.yml@v2 + with: + cache-key: file-cache-${{github.sha}} + cache-directory: pr-files + python-cache-key: voronusers-python-cache + check_stl_rotation: + name: Check STL rotation + needs: [setup_python] + if: ${{ needs.checkout_check_whitespace.outputs.stl == 'true' }} + uses: VoronDesign/.github/.github/workflows/check-stl-rotation.yml@v2 + secrets: + # ToDo: Change to secrets: inherit once it's in the VoronDesign org + IMAGEKIT_PRIVATE_KEY: ${{ secrets.IMAGEKIT_PRIVATE_KEY }} + IMAGEKIT_PUBLIC_KEY: ${{ secrets.IMAGEKIT_PUBLIC_KEY }} + with: + imagekit-url-endpoint: https://ik.imagekit.io/vorondesign + cache-key: file-cache-${{github.sha}} + cache-directory: pr-files + python-cache-key: voronusers-python-cache + validate_metadata: + name: Check metadata files + needs: [checkout_check_whitespace] + if: ${{ needs.checkout_check_whitespace.outputs.yaml == 'true' }} + uses: VoronDesign/.github/.github/workflows/validate-metadata-files.yml@v2 + with: + cache-key: file-cache-${{github.sha}} + cache-directory: pr-files + preview_readme: + name: Preview README.md + needs: [validate_metadata] + uses: VoronDesign/.github/.github/workflows/preview-readme.yml@v2 + with: + subdirectory: printer_mods + cache-key: file-cache-${{github.sha}} + cache-directory: pr-files + create_pro_comment: + name: Create PR comment + needs: [checkout_check_whitespace, check_stls, check_stl_rotation, validate_metadata, preview_readme] + if: ${{ always() }} + uses: VoronDesign/.github/.github/workflows/generate-pr-comment.yml@v2 + with: + repository: ${{ github.repository }} + action_run_id: ${{ github.run_id }} + + + # check_files: + # name: Check files + # needs: [validate_metadata] + # uses: VoronDesign/.github/.github/workflows/validate_files.yml@v1 + # with: + # subdirectory: printer_mods + # cache-key: file-cache-${{github.sha}} + # cache-directory: pr-files + # python-cache-key: voronusers-python-cache diff --git a/.github/workflows/push_main_ci.yml b/.github/workflows/push_main_ci.yml new file mode 100644 index 000000000..afa8ccd82 --- /dev/null +++ b/.github/workflows/push_main_ci.yml @@ -0,0 +1,24 @@ +name: VoronUsers Push Main CI +on: + push: + branches: + - 'master' +jobs: + setup_python: + name: Rebuild repo caches + uses: VoronDesign/.github/.github/workflows/prepare-environment.yml@v1 + with: + apt-packages: "admesh, libadmesh-dev" + pip-packages: "admesh pyyaml imagekitio git+https://github.com/ChristophSchranz/Tweaker-3.git" + python-cache-key: voronusers-python-cache + preview_readme: + name: Generate README + uses: VoronDesign/.github/.github/workflows/generate-readme.yml@v1 + with: + subdirectory: printer_mods + commit_msg: "Generate VoronUsers printer_mods README.md [skip ci]" + commit_user: Voron-GitHub-Bot + commit_email: github@vorondesign.com + secrets: + VORON_BOT_GITHUB_PAT: ${{ secrets.VORON_BOT_GITHUB_PAT }} + diff --git a/printer_mods/1-0-R/handle/.metadata.yml b/printer_mods/1-0-R/handle/.metadata.yml new file mode 100644 index 000000000..457f3b9d8 --- /dev/null +++ b/printer_mods/1-0-R/handle/.metadata.yml @@ -0,0 +1,20 @@ +cad: +- CAD/handle.FCStd +- CAD/handle.step +description: Handle for Voron 2.4 +images: +- images/extrusion_with_inner_part_mounted.jpg +- images/extrusion_with_handle.jpg +- images/handle.jpg +- images/handle_rendering.jpg +- images/extrusion_with_all_handle_parts.jpg +- images/extrusion_with_tnuts.jpg +- images/nuts_and_bolts.jpg +- images/handle_inner_part.jpg +- images/handle_middle_part.jpg +- images/handle_outer_part.jpg +- images/inner_part_with_heat_set_inserts.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: V2.4 handle diff --git a/printer_mods/120decibell/exhaust_housing_side_entry/.metadata.yml b/printer_mods/120decibell/exhaust_housing_side_entry/.metadata.yml new file mode 100644 index 000000000..dbddbf0fa --- /dev/null +++ b/printer_mods/120decibell/exhaust_housing_side_entry/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/exhaust_housing_side_entry.f3d +description: Exhaust housing with dual cover screws and single or dual side entry + filament paths. +images: +- images/side_housing_view1.png +- images/side_housing_view2.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: Side entry exhaust housing diff --git a/printer_mods/120decibell/huvud_chain_mount/.metadata.yml b/printer_mods/120decibell/huvud_chain_mount/.metadata.yml new file mode 100644 index 000000000..035deeb67 --- /dev/null +++ b/printer_mods/120decibell/huvud_chain_mount/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- STEP/huvud_chain_mount_3_hole.step +- STEP/huvud_chain_mount_2_hole.step +description: Huvud rear mount for Clockwork or LGX that supports a cable chain. +images: +- images/huvud_chain_mount.png +- images/huvud_mount_install2.png +- images/huvud_mount_install1.png +mod_version: 1 +printer_compatibility: +- V1.8 +- VT +title: Huvud Chain Mount diff --git a/printer_mods/3dpandme/Fannypack_zero/.metadata.yml b/printer_mods/3dpandme/Fannypack_zero/.metadata.yml new file mode 100644 index 000000000..b1dc58d84 --- /dev/null +++ b/printer_mods/3dpandme/Fannypack_zero/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- fannypack_zero.step +description: Electronics cooling solution for Voron Zero +images: +- Installed.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +- VSW +- VT +title: FANnypack zero diff --git a/printer_mods/3dpandme/Thermistor_holder_zero/.metadata.yml b/printer_mods/3dpandme/Thermistor_holder_zero/.metadata.yml new file mode 100644 index 000000000..54645b84c --- /dev/null +++ b/printer_mods/3dpandme/Thermistor_holder_zero/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- thermistor_holder_zero.step +description: Extended thermistor holder for Voron Zero +images: +- thermistor_holder_comparison.png +- installed.png +mod_version: 1 +printer_compatibility: +- V0.2 +- VSW +- VT +title: Thermistor holder zero diff --git a/printer_mods/3vilson/V0.1_Skirt_Holes/.metadata.yml b/printer_mods/3vilson/V0.1_Skirt_Holes/.metadata.yml new file mode 100644 index 000000000..d8652ffb0 --- /dev/null +++ b/printer_mods/3vilson/V0.1_Skirt_Holes/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Skirt with Access Holes from the bottom +images: +- CAD.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1_Skirt_Holes diff --git a/printer_mods/3vilson/V0.1_Skirt_Inlet/.metadata.yml b/printer_mods/3vilson/V0.1_Skirt_Inlet/.metadata.yml new file mode 100644 index 000000000..4dfe8f22c --- /dev/null +++ b/printer_mods/3vilson/V0.1_Skirt_Inlet/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Skirt with C14 inlet + New feet to screw into +images: +- CAD.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1_Skirt_Inlet diff --git a/printer_mods/42bios/LED_mount/.metadata.yml b/printer_mods/42bios/LED_mount/.metadata.yml new file mode 100644 index 000000000..844158ddb --- /dev/null +++ b/printer_mods/42bios/LED_mount/.metadata.yml @@ -0,0 +1,13 @@ +cad: [] +description: AngryLED - LED-mount for Lumentech LT3 profiles. +images: +- AngryLED_v1_1.png +- AngryLED_v1_3.png +- AngryLED_v1_2.png +- led_mount_v01_2.png +- led_mount_v01_1.png +- AngryLED_small_v1.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: LED mount diff --git a/printer_mods/42bios/corner_panel_clip_cable/.metadata.yml b/printer_mods/42bios/corner_panel_clip_cable/.metadata.yml new file mode 100644 index 000000000..f2f2ca59c --- /dev/null +++ b/printer_mods/42bios/corner_panel_clip_cable/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Corner panel clip with an internal cable path. +images: +- corner_panel_clip_cp.png +- corner_panel_clip_cp2.png +- corner_panel_clip_cp.gif +mod_version: 1 +printer_compatibility: +- V2.4 +title: Corner panel clip w. cable diff --git a/printer_mods/42bios/exhaust_filter_housing_side/.metadata.yml b/printer_mods/42bios/exhaust_filter_housing_side/.metadata.yml new file mode 100644 index 000000000..f0c328d17 --- /dev/null +++ b/printer_mods/42bios/exhaust_filter_housing_side/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: Exhaust filter housing with the G1-8 "thread on the side. +images: +- efh_s_2.png +- efh_s_1.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Exhaust filter housing - side thread diff --git a/printer_mods/42bios/relay_mount/.metadata.yml b/printer_mods/42bios/relay_mount/.metadata.yml new file mode 100644 index 000000000..48706a04a --- /dev/null +++ b/printer_mods/42bios/relay_mount/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: relay-mount for 2x 2 channel relay modules. +images: +- relay_mount_printed.jpeg +- relay_mount2.png +- relay_mount1.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: relay mount diff --git a/printer_mods/Akio/cable_routing_z_belt_cover/.metadata.yml b/printer_mods/Akio/cable_routing_z_belt_cover/.metadata.yml new file mode 100644 index 000000000..5c6058c44 --- /dev/null +++ b/printer_mods/Akio/cable_routing_z_belt_cover/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- cad/cable_routing_z_belt_cover_a_mod.step +- cad/cable_routing_z_belt_cover_b_mod.step +description: Z belt covers that allow hidden cable routing. +images: +- img/cable_routing_z_belt_cover_mod_img_0.png +- img/cable_routing_z_belt_cover_mod_img_1.png +- img/cable_routing_z_belt_cover_mod_img_3.jpg +- img/cable_routing_z_belt_cover_mod_img_2.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Hidden cable routing z belt cover diff --git a/printer_mods/AlexanderT-Moss/270-Clamping-Hinges/.metadata.yml b/printer_mods/AlexanderT-Moss/270-Clamping-Hinges/.metadata.yml new file mode 100644 index 000000000..c4c947aef --- /dev/null +++ b/printer_mods/AlexanderT-Moss/270-Clamping-Hinges/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- CAD/270-Clamping-Hinge.f3d +- CAD/270-Clamping-Hinge.step +description: Simple 270 degree hinges that clamp to the front panels instead of using + VHB or drilled holes +images: +- Images/270-Clamping-Hinges-Assembly.gif +- Images/IMG_0310.png +- Images/Logo-Variation-2.png +- Images/Logo-Variation-0.png +- Images/Logo-Variation-1.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: 270 Clamping Hinges diff --git a/printer_mods/Andre/Mini_Afterburner_ADXL345_Mount/.metadata.yml b/printer_mods/Andre/Mini_Afterburner_ADXL345_Mount/.metadata.yml new file mode 100644 index 000000000..6dd49cf26 --- /dev/null +++ b/printer_mods/Andre/Mini_Afterburner_ADXL345_Mount/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/MiniAB_ADXL_Mount.f3d +description: Mount for an AXDL345 on the Mini Afterburner +images: +- Images/CAD_1.png +- Images/CAD_3.png +- Images/CAD_2.png +- Images/PIC_1.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: Mini Afterburner ADXL345 Mount diff --git a/printer_mods/Andre/Mini_Afterburner_Strain_Relief/.metadata.yml b/printer_mods/Andre/Mini_Afterburner_Strain_Relief/.metadata.yml new file mode 100644 index 000000000..6269bb609 --- /dev/null +++ b/printer_mods/Andre/Mini_Afterburner_Strain_Relief/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/Mini_Afterburner_Strain_Relief.f3d +description: A replacement strain relief for the Mini Afterburner toolhead +images: +- Images/CAD_1.png +- Images/CAD_3.png +- Images/CAD_2.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: Mini Afterburner Strain Relief diff --git a/printer_mods/Andre/Revo_Nozzle_Skirt_Trident/.metadata.yml b/printer_mods/Andre/Revo_Nozzle_Skirt_Trident/.metadata.yml new file mode 100644 index 000000000..1790ae24e --- /dev/null +++ b/printer_mods/Andre/Revo_Nozzle_Skirt_Trident/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- CAD/Trident_Revo_Nozzle_Skirt.step +description: A Revo nozzle box hidden in a Trident skirt. +images: +- Images/Photo-Closed.jpg +- Images/Photo-Opened.jpg +mod_version: 1 +printer_compatibility: +- VT +title: Revo Nozzle Skirt diff --git a/printer_mods/Andre/V0_Neopixel_Front_Bed_Mount/.metadata.yml b/printer_mods/Andre/V0_Neopixel_Front_Bed_Mount/.metadata.yml new file mode 100644 index 000000000..8fa0ab227 --- /dev/null +++ b/printer_mods/Andre/V0_Neopixel_Front_Bed_Mount/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/V0_Neopixel_Front_Bed_Mount.f3d +description: A replacement Front Bed Mount with room for a neopixel or dotstar behind + the logo +images: +- Images/CAD_1.png +- Images/CAD_2.png +- Images/PIC_2.jpg +- Images/PIC_1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Neopixel Front Bed Mount diff --git a/printer_mods/Backenfutter/Mount_for_Electreeks_Camera/.metadata.yml b/printer_mods/Backenfutter/Mount_for_Electreeks_Camera/.metadata.yml new file mode 100644 index 000000000..2f2fc816c --- /dev/null +++ b/printer_mods/Backenfutter/Mount_for_Electreeks_Camera/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: This Mod is a simple "One Piece" mount for the popular Electreeks Camera. +images: +- Pictures/Picture1.jpeg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Mount for Electreeks Camera diff --git a/printer_mods/Badnoob/AB-BN/.metadata.yml b/printer_mods/Badnoob/AB-BN/.metadata.yml new file mode 100644 index 000000000..548b1fb40 --- /dev/null +++ b/printer_mods/Badnoob/AB-BN/.metadata.yml @@ -0,0 +1,20 @@ +cad: +- AB-BN-30_Assy.f3d +- AB_BN_30.step +description: Improved Afterburner with 5015 fan +images: +- fans_wires.png +- wirestorage.png +- ModifiedFan.png +- overview.png +- AB-BN-28.png +- RapidoStickout.png +- fanspacer.png +- fanspring.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +- VT +title: AB-BN Afterburner mod (5015) diff --git a/printer_mods/Badnoob/ABBN_for_Stock/.metadata.yml b/printer_mods/Badnoob/ABBN_for_Stock/.metadata.yml new file mode 100644 index 000000000..2bf11d415 --- /dev/null +++ b/printer_mods/Badnoob/ABBN_for_Stock/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/Dragon_AB_4020_1.step +- CAD/Rapido_AB_4020_2.step +- CAD/RevoVoron_AB_4020.step +description: Improved Dragon and Rapido toolhead for stock Afterburner with 4020 fan +images: [] +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +- VT +title: AB-BN for Stock Afterburner (4020) diff --git a/printer_mods/Badnoob/Precision_AB_Drive/.metadata.yml b/printer_mods/Badnoob/Precision_AB_Drive/.metadata.yml new file mode 100644 index 000000000..e4a434237 --- /dev/null +++ b/printer_mods/Badnoob/Precision_AB_Drive/.metadata.yml @@ -0,0 +1,11 @@ +cad: [] +description: Changes the gearing for the AB drives to improve both resolution and + torque, with a strenthened frame. +images: +- ABcloseup.jpg +- reduction_overview.jpg +- reduction.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Precision AB Drive diff --git a/printer_mods/Badnoob/Rail_Alignment/.metadata.yml b/printer_mods/Badnoob/Rail_Alignment/.metadata.yml new file mode 100644 index 000000000..60256207b --- /dev/null +++ b/printer_mods/Badnoob/Rail_Alignment/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Tools and procedure to properly align the rails in 2.4 and Afterburner +images: +- pivot_front.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Rail Alignment diff --git a/printer_mods/Baltojikale/LoudOwl_aka_Stabby/.metadata.yml b/printer_mods/Baltojikale/LoudOwl_aka_Stabby/.metadata.yml new file mode 100644 index 000000000..9842806b0 --- /dev/null +++ b/printer_mods/Baltojikale/LoudOwl_aka_Stabby/.metadata.yml @@ -0,0 +1,21 @@ +cad: +- CAD/LoudOwl_v16.f3d +- CAD/LoudOwl_v16.step +- CAD/LoudOwl_for_split_ABBN_untested.step +description: Alternative dual 5015 part cooling fan toolhead for Afterburner +images: +- Visual/Supp_removal.jpg +- Visual/LoudOWL.jpg +- Visual/Wiring.jpg +- Visual/comparison.jpg +- Visual/Fans_in_place.jpg +- Visual/LoudOwl_2.jpg +- Visual/Using_cut_tool_3.jpg +- Visual/Using_cut_tool_2.jpg +- Visual/Using_cut_tool_1.jpg +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +title: LoudOwl aka Stabby diff --git a/printer_mods/BladeScraper-Designs/CornerPanel_SpoolHolder/.metadata.yml b/printer_mods/BladeScraper-Designs/CornerPanel_SpoolHolder/.metadata.yml new file mode 100644 index 000000000..a07d22d3f --- /dev/null +++ b/printer_mods/BladeScraper-Designs/CornerPanel_SpoolHolder/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: A better supported Spool Holder that mounts to a modified corner panel. +images: +- IMG/Cornerpanel_Spoolholder.png +- IMG/Extrude_This.png +- IMG/IRL.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: CornerPanel_SpoolHolder diff --git a/printer_mods/BladeScraper-Designs/Horizontal-Spool-Holder/.metadata.yml b/printer_mods/BladeScraper-Designs/Horizontal-Spool-Holder/.metadata.yml new file mode 100644 index 000000000..a2b794baf --- /dev/null +++ b/printer_mods/BladeScraper-Designs/Horizontal-Spool-Holder/.metadata.yml @@ -0,0 +1,11 @@ +cad: [] +description: Based on the stock holder but mounts to the horizontal extrusions. +images: +- img/Holder-with-spool.jpg +- img/Holder.png +- img/Holder_1.png +- img/Holder-Real.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Horizontal Spool Holder diff --git a/printer_mods/BladeScraper-Designs/Microswitch_Pod_With_Conector/.metadata.yml b/printer_mods/BladeScraper-Designs/Microswitch_Pod_With_Conector/.metadata.yml new file mode 100644 index 000000000..e01dd9ce6 --- /dev/null +++ b/printer_mods/BladeScraper-Designs/Microswitch_Pod_With_Conector/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Microswitch pod with JST-XH 4-pin connector +images: +- img/assembly.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Microswitch Pod With Connector diff --git a/printer_mods/Blamm/lrs-100/.metadata.yml b/printer_mods/Blamm/lrs-100/.metadata.yml new file mode 100644 index 000000000..7c81c4205 --- /dev/null +++ b/printer_mods/Blamm/lrs-100/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: DIN rail mount for an extra LRS-100 Power Supply +images: [] +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: LRS-100 DIN mount diff --git a/printer_mods/BlueBear/Deck_Panel_Backpack/.metadata.yml b/printer_mods/BlueBear/Deck_Panel_Backpack/.metadata.yml new file mode 100644 index 000000000..86717fb98 --- /dev/null +++ b/printer_mods/BlueBear/Deck_Panel_Backpack/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- Deck_Panel_Backpack.f3d +- Deck_Panel_Backpack.step +description: A mounting alternative if you don't want to drill your deck panel +images: +- images/image01.jpg +- images/image02.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Deck Panel Backpack diff --git a/printer_mods/BlueBear/Wago_221_mount/.metadata.yml b/printer_mods/BlueBear/Wago_221_mount/.metadata.yml new file mode 100644 index 000000000..3a2fe4b12 --- /dev/null +++ b/printer_mods/BlueBear/Wago_221_mount/.metadata.yml @@ -0,0 +1,18 @@ +cad: +- WAGO_221-412_5x2-mount.step +- WAGO_221-412_3x2-mount_screw.step +- WAGO_221-412_3x2-mount.step +- WAGO_221-413_3x3-mount-screw.step +- 1515_SnapIn_Makerbeam.step +- 1515_SnapIn_LDO.step +description: Mounts for Wago 221 to screw or clip-in on 1515 extrusions +images: +- images/PrintOrientation.jpg +- images/ScrewMountUsage.jpg +- images/picSnapMount3piece.jpg +- images/Mounting.jpg +- images/picSnapMount5piece.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Clippable Wago 221 Mounts diff --git a/printer_mods/BlueBear/Ziptie_Mount/.metadata.yml b/printer_mods/BlueBear/Ziptie_Mount/.metadata.yml new file mode 100644 index 000000000..0b0bd5707 --- /dev/null +++ b/printer_mods/BlueBear/Ziptie_Mount/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- 1515_SnapIn_ZipTie_Makerbeam.step +- 1515_SnapIn_ZipTie_LDO.step +description: Clippable Ziptie hooks for 1515 extrusions +images: +- images/image01.jpg +- images/image03.jpg +- images/image02.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Ziptie Mount diff --git a/printer_mods/Boingomw/Wago_mount/.metadata.yml b/printer_mods/Boingomw/Wago_mount/.metadata.yml new file mode 100644 index 000000000..8a295632b --- /dev/null +++ b/printer_mods/Boingomw/Wago_mount/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- cad/2020-Wago_221-412_tray-5x2.step +description: Smaller 5 port Wago mount that fits parallel to the support rails +images: +- images/5x2_front_view.png +- images/5x2_back_view.png +- images/Installed_Older_Version.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Wago mount diff --git a/printer_mods/Bondtech/Mini-After-LGX-Lite/.metadata.yml b/printer_mods/Bondtech/Mini-After-LGX-Lite/.metadata.yml new file mode 100644 index 000000000..0f89eb8de --- /dev/null +++ b/printer_mods/Bondtech/Mini-After-LGX-Lite/.metadata.yml @@ -0,0 +1,20 @@ +cad: +- CAD/Mini-After-LGX-lite.step +- CAD/Z_Bed_adjustable_Y_offset.step +description: LGX Lite Toolhead Setup For Voron V0.1. +images: +- Images/PTFE-Cutting-Jig.jpg +- Images/Hotend-Mount-Mosquito-3010-Fan.png +- Images/mini-after-lgx-lite_header-1200x628.jpg +- Images/Cowling-Universal.png +- Images/Hotend-Mount-Copperhead-Screw-Mount-3007-Fan.png +- Images/Hotend-Mount-DRAGON-3007-Fan.png +- Images/Hotend-Mount-DRAGONFLY-3007-Fan.png +- Images/X-Carriage.png +- Images/Hotend-Mount-MOSQUITO-3007-Fan.png +- Images/Hotend-Mount-DRAGONFLY-3010-Fan.png +- Images/Hotend-Mount-Copperhead-Screw-Mount-3010-Fan.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: Mini-After-LGX-Lite diff --git a/printer_mods/ByteChild/2_Channel_Relay_DIN_Rail_Bracket/.metadata.yml b/printer_mods/ByteChild/2_Channel_Relay_DIN_Rail_Bracket/.metadata.yml new file mode 100644 index 000000000..be10ad52a --- /dev/null +++ b/printer_mods/ByteChild/2_Channel_Relay_DIN_Rail_Bracket/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- relay_bracket.step +description: DIN Rail mounting bracket for an 2-Channel-Relay +images: +- relay_bracket_2.jpg +- relay_bracket_1.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: 2-Channel Relay DIN Rail Bracket diff --git a/printer_mods/ByteChild/ESP32_DIN_Rail_Bracket/.metadata.yml b/printer_mods/ByteChild/ESP32_DIN_Rail_Bracket/.metadata.yml new file mode 100644 index 000000000..989fa18fe --- /dev/null +++ b/printer_mods/ByteChild/ESP32_DIN_Rail_Bracket/.metadata.yml @@ -0,0 +1,9 @@ +cad: +- ESP32_bracket.step +description: DIN rail mounting bracket for an ESP32 +images: +- esp32_bracket.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: ESP32 DIN Rail Bracket diff --git a/printer_mods/CannedBass/PITFT50_45_degree_mount/.metadata.yml b/printer_mods/CannedBass/PITFT50_45_degree_mount/.metadata.yml new file mode 100644 index 000000000..8a86028f6 --- /dev/null +++ b/printer_mods/CannedBass/PITFT50_45_degree_mount/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/PITFT50_45_degree_mount.f3d +- CAD/PITFT50_45_degree_mount.step +description: Mount that puts the screen at a 45-degree angle for more vertical clearance +images: +- Images/side-view.jpeg +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: PITFT50 45-degree mount diff --git a/printer_mods/CannedBass/Trident_Bed_Fans/.metadata.yml b/printer_mods/CannedBass/Trident_Bed_Fans/.metadata.yml new file mode 100644 index 000000000..ad2225b26 --- /dev/null +++ b/printer_mods/CannedBass/Trident_Bed_Fans/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- CAD/5015_Bed_Fan_Mount_Trident.step +- CAD/5015_Bed_Fan_Mount_Trident.f3d +description: Bed fans for Trident +images: +- Images/trident_bed_fans.jpeg +mod_version: 1 +printer_compatibility: +- VT +title: Trident Bed Fans diff --git a/printer_mods/Ch4rlesB/V0_Handles_Slim/.metadata.yml b/printer_mods/Ch4rlesB/V0_Handles_Slim/.metadata.yml new file mode 100644 index 000000000..8994a8380 --- /dev/null +++ b/printer_mods/Ch4rlesB/V0_Handles_Slim/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Simple and slim handles for the V0 +images: +- Screenshot1.png +- Screenshot2.png +- Screenshot3.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Handles Slim diff --git a/printer_mods/Chaoticlab/Tool_free_tensioner/.metadata.yml b/printer_mods/Chaoticlab/Tool_free_tensioner/.metadata.yml new file mode 100644 index 000000000..bdda548db --- /dev/null +++ b/printer_mods/Chaoticlab/Tool_free_tensioner/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- CAD/Tool_free_tensioner.STEP +description: Tool-free tensioner for Z-Axis +images: +- Images/Tool_free_tensioner_1.png +- Images/Tool_free_tensioner_2.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Tool_free_tensioner diff --git a/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/.metadata.yml b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/.metadata.yml new file mode 100644 index 000000000..6e93fb1a9 --- /dev/null +++ b/printer_mods/ChenTheDesignMaker/Z_Belt_Clip/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Simple clip to keep extra Z belts clean and away from panels +images: +- imgs/IMG_3019.jpg +- imgs/IMG_3018.jpg +- imgs/IMG_3020.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Z Belt Clip diff --git a/printer_mods/D4rkCelerity/Raspberry_Pi_Zero_Bracket/.metadata.yml b/printer_mods/D4rkCelerity/Raspberry_Pi_Zero_Bracket/.metadata.yml new file mode 100644 index 000000000..e99f29d4a --- /dev/null +++ b/printer_mods/D4rkCelerity/Raspberry_Pi_Zero_Bracket/.metadata.yml @@ -0,0 +1,11 @@ +cad: [] +description: Modified version of Trident RPi bracket to fit the smaller RPi Zero +images: +- image/Rendering.JPG +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VT +title: Raspberry Pi Zero Bracket diff --git a/printer_mods/DC67/plug_panel_schaffner/.metadata.yml b/printer_mods/DC67/plug_panel_schaffner/.metadata.yml new file mode 100644 index 000000000..29b646738 --- /dev/null +++ b/printer_mods/DC67/plug_panel_schaffner/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: A modified plug panel for the Power Entry Connector Schaffner FN286-10-06 + with two integreated Keystone sockets. +images: +- IMG_20201201_164639.jpg +- IMG_20201201_164633.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Plug Panel Mod for Schaffner FN286-10-06 diff --git a/printer_mods/DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets/.metadata.yml b/printer_mods/DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets/.metadata.yml new file mode 100644 index 000000000..a5aba8dd4 --- /dev/null +++ b/printer_mods/DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Voron 0.1 Mounting brackets with/without RPi 4 +images: +- Voron_V0_Duet_2_Wifi_Bracket_v14.png +- Duet2WifiMountingBracket.jpg +- Voron_V0_Duet_2_Wifi_Bracket_with_RPi_v14.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 Duet 2 Wifi mounting brackets diff --git a/printer_mods/DaGlo/Voron_V0_MW_PS_Bracket/.metadata.yml b/printer_mods/DaGlo/Voron_V0_MW_PS_Bracket/.metadata.yml new file mode 100644 index 000000000..62df31d90 --- /dev/null +++ b/printer_mods/DaGlo/Voron_V0_MW_PS_Bracket/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Voron V0 Mean Well power supply bracket (Funssor Kit) +images: +- Voron_V0_MW_PS_Bracket_v7_2.png +- Voron_V0_MW_PS_Bracket_v7_1.png +- Voron_V0_MW_PS_Bracket.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Voron V0 Mean Well power supply bracket (Funssor Kit) diff --git a/printer_mods/DaGlo/Voron_V0_SSR_Mount/.metadata.yml b/printer_mods/DaGlo/Voron_V0_SSR_Mount/.metadata.yml new file mode 100644 index 000000000..39027da65 --- /dev/null +++ b/printer_mods/DaGlo/Voron_V0_SSR_Mount/.metadata.yml @@ -0,0 +1,12 @@ +cad: [] +description: Voron V0 SSR Mount for the bottom +images: +- Voron_V0_SSR_Mount_v5_Back.png +- Voron_V0_SSR_Mount_Install_Step_1.jpg +- Voron_V0_SSR_Mount_Install_Step_2.jpg +- Voron_V0_SSR_Mount_Install_Step_3.jpg +- Voron_V0_SSR_Mount_v5_Front.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: Voron V0 SSR Mount diff --git a/printer_mods/DaGrooch13/Tophat_Exhaust_Filter/.metadata.yml b/printer_mods/DaGrooch13/Tophat_Exhaust_Filter/.metadata.yml new file mode 100644 index 000000000..49ae38dfb --- /dev/null +++ b/printer_mods/DaGrooch13/Tophat_Exhaust_Filter/.metadata.yml @@ -0,0 +1,14 @@ +cad: [] +description: Activated charcoal exhaust filter with HEPA that replaces the rear tophat + panel +images: +- Github_Images/Front_View.jpg +- Github_Images/Side_View.jpg +- Github_Images/Top_View.jpg +- Github_Images/Exploded_Final_Labeled.jpg +- Github_Images/Tophat_Install.jpg +- Github_Images/Asm_Front_View.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Tophat Exhaust Filter V0 diff --git a/printer_mods/DaStivi/the_Cephalopods_limb/.metadata.yml b/printer_mods/DaStivi/the_Cephalopods_limb/.metadata.yml new file mode 100644 index 000000000..28de1cafc --- /dev/null +++ b/printer_mods/DaStivi/the_Cephalopods_limb/.metadata.yml @@ -0,0 +1,15 @@ +cad: [] +description: An alternative Din rail mount for BTT Octopus (PRO) boards +images: +- img/IMG-20210610-WA0001.jpg +- img/simple_bracket_STL.jpg +- img/octopus.svg +- img/octopus_inverted.svg +- img/STL.jpg +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +- VT +title: The Cephalopod limb (BTT Octopus PRO Bracket(s)) diff --git a/printer_mods/Dan88/V0skirt/.metadata.yml b/printer_mods/Dan88/V0skirt/.metadata.yml new file mode 100644 index 000000000..7d785d440 --- /dev/null +++ b/printer_mods/Dan88/V0skirt/.metadata.yml @@ -0,0 +1,8 @@ +cad: +- V0_skirts_onepart.step +description: One part Skirts for the V0 +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 one-part Skirts diff --git a/printer_mods/Daten/Voron_2.4_Revo_Nozzle_Holder/.metadata.yml b/printer_mods/Daten/Voron_2.4_Revo_Nozzle_Holder/.metadata.yml new file mode 100644 index 000000000..c216c888c --- /dev/null +++ b/printer_mods/Daten/Voron_2.4_Revo_Nozzle_Holder/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/Revo_Nozzle_v12.step +description: A skirt case for the Revo hotends to reside R1 and R2 +images: +- Images/Finished_Open.jpg +- Images/Finished_Closed.jpg +- Images/Completed.png +- Images/AllSizes.png +- Images/Open.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Revo hotend skirt case diff --git a/printer_mods/DerekBackus/LED_Holder/.metadata.yml b/printer_mods/DerekBackus/LED_Holder/.metadata.yml new file mode 100644 index 000000000..97c53ef37 --- /dev/null +++ b/printer_mods/DerekBackus/LED_Holder/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Simple bracket to mount an LED strip +images: +- Images/LED_Holder_Picture.jpg +- Images/LED_Holder_ISO.png +- Images/LED_Strip_Example.jpg +- Images/LED_Holder_Side_View.png +mod_version: 1 +printer_compatibility: [] +title: LED Strip Holder diff --git a/printer_mods/DerekBackus/Right_Skirt_Switch/.metadata.yml b/printer_mods/DerekBackus/Right_Skirt_Switch/.metadata.yml new file mode 100644 index 000000000..c2c89b93a --- /dev/null +++ b/printer_mods/DerekBackus/Right_Skirt_Switch/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Moves power switch to right front skirt on the Trident +images: +- Images/Front_View.png +- Images/Filter_Front_View.png +- Images/ISO_View.png +- Images/Filter_ISO_View.png +mod_version: 1 +printer_compatibility: [] +title: Trident Right Skirt Switch diff --git a/printer_mods/Derpimus/Block_handle_v0.1/.metadata.yml b/printer_mods/Derpimus/Block_handle_v0.1/.metadata.yml new file mode 100644 index 000000000..aa848b240 --- /dev/null +++ b/printer_mods/Derpimus/Block_handle_v0.1/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: V0.1 Block Style Handle +images: +- images/125217883-bf24e900-e28f-11eb-97ca-68b314f65b5d.jpg +- images/125217901-c4823380-e28f-11eb-9288-839585f50953.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 Block Handle diff --git a/printer_mods/DorjeDorf/Duet_3_3HC_Din_Bracket/.metadata.yml b/printer_mods/DorjeDorf/Duet_3_3HC_Din_Bracket/.metadata.yml new file mode 100644 index 000000000..5b4aa05f9 --- /dev/null +++ b/printer_mods/DorjeDorf/Duet_3_3HC_Din_Bracket/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: V2.4 Duet 3 3HC Din Bracket +images: [] +mod_version: 1 +printer_compatibility: +- V2.4 +title: Duet 3 3HC Din Bracket diff --git a/printer_mods/DorjeDorf/Duet_3_6HC_Din_Bracket/.metadata.yml b/printer_mods/DorjeDorf/Duet_3_6HC_Din_Bracket/.metadata.yml new file mode 100644 index 000000000..854755945 --- /dev/null +++ b/printer_mods/DorjeDorf/Duet_3_6HC_Din_Bracket/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: V2.4 Duet 3 6HC Din Bracket +images: +- Example_print-courtesy_of_medicusdkfz.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Duet 3 6HC Din Bracket diff --git a/printer_mods/Dr-Info/corner_cable_cover_with_drop_down_holes/.metadata.yml b/printer_mods/Dr-Info/corner_cable_cover_with_drop_down_holes/.metadata.yml new file mode 100644 index 000000000..38885f430 --- /dev/null +++ b/printer_mods/Dr-Info/corner_cable_cover_with_drop_down_holes/.metadata.yml @@ -0,0 +1,22 @@ +cad: +- CAD/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_left_rev01.f3d +- CAD/LDO_LED_PCB_spacer_narrow_rev01.f3d +- CAD/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_left_rev01.step +- CAD/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_right_rev01.step +- CAD/LDO_LED_PCB_spacer_narrow_rev01.step +- CAD/top_corner_cable_cover_with_drop_holes_rev02.step +- CAD/top_corner_cable_cover_with_drop_holes_rev02.f3d +- CAD/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_right_rev01.f3d +description: Corner cable cover around Z-idler with drop holes near z frame and cutouts + for inline wiring from 2020 extrustions +images: +- Images/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_left_right_installed.JPG +- Images/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_right.JPG +- Images/top_corner_cable_cover_with_drop_holes_installed.JPG +- Images/top_corner_cable_cover_with_drop_holes_front.JPG +- Images/top_corner_cable_cover_with_drop_holes_LDO_PCB_splitter_left.JPG +- Images/top_corner_cable_cover_with_drop_holes_bottom.JPG +mod_version: 1 +printer_compatibility: +- V2.4 +title: Corner Cable Cover with Drop Holes diff --git a/printer_mods/DrGhetto/GhettoPanels/.metadata.yml b/printer_mods/DrGhetto/GhettoPanels/.metadata.yml new file mode 100644 index 000000000..eefe9650f --- /dev/null +++ b/printer_mods/DrGhetto/GhettoPanels/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: Printed panels for the Voron Zero +images: +- images/db.png +- images/ghettopanels.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Ghetto Panels diff --git a/printer_mods/ElPoPo/RemovableDoors/.metadata.yml b/printer_mods/ElPoPo/RemovableDoors/.metadata.yml new file mode 100644 index 000000000..55d771785 --- /dev/null +++ b/printer_mods/ElPoPo/RemovableDoors/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: New hinge to easily remove the door and have a wide opening V2.x +images: +- Images/MMU.jpg +- Images/Charniere_Av.jpg +- Images/Charniere_Ar.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Removable Doors diff --git a/printer_mods/Electroleon/U2C_Mounting/.metadata.yml b/printer_mods/Electroleon/U2C_Mounting/.metadata.yml new file mode 100644 index 000000000..38b3638c0 --- /dev/null +++ b/printer_mods/Electroleon/U2C_Mounting/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/U2C_Mounting_Universal.STEP +description: Bigtreetech U2C CAN Interface mounting bracket +images: +- Images/U2C_Mounted.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VT +title: U2C Mounting diff --git a/printer_mods/Ellis/15x15_Drag_Chain_End/.metadata.yml b/printer_mods/Ellis/15x15_Drag_Chain_End/.metadata.yml new file mode 100644 index 000000000..b1a8994cb --- /dev/null +++ b/printer_mods/Ellis/15x15_Drag_Chain_End/.metadata.yml @@ -0,0 +1,9 @@ +cad: +- CAD/15x15_Drag_Chain_End.f3d +description: 15x15 drag chain end piece +images: +- Images/Image.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: 15x15 Drag Chain End diff --git a/printer_mods/Ellis/Badge_Retractor_Mount/.metadata.yml b/printer_mods/Ellis/Badge_Retractor_Mount/.metadata.yml new file mode 100644 index 000000000..67afc9bac --- /dev/null +++ b/printer_mods/Ellis/Badge_Retractor_Mount/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/Retractor Mount Straight.f3d +- CAD/Retractor Mount Slanted.f3d +description: Extrusion mount for badge retractor to keep bowden tube out of the way. +images: +- Images/Image.jpg +- Images/Example.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Badge Retractor Mount diff --git a/printer_mods/Ellis/Bed_Fans/.metadata.yml b/printer_mods/Ellis/Bed_Fans/.metadata.yml new file mode 100644 index 000000000..53775ac2f --- /dev/null +++ b/printer_mods/Ellis/Bed_Fans/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- 5015_Bed_Fan_Mount/5015_Bed_Fan_Mount.step +description: Bed fan control macros and 5015 bed fan mounts +images: +- Images/5015_mount_isolated.png +- Images/5015_triple.png +- Images/5015_quad.png +- Images/5015_quad_installed.png +- Images/5015_dual.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Bed Fans diff --git a/printer_mods/Ellis/Short_Z_Joints/.metadata.yml b/printer_mods/Ellis/Short_Z_Joints/.metadata.yml new file mode 100644 index 000000000..fb3a15c79 --- /dev/null +++ b/printer_mods/Ellis/Short_Z_Joints/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- CAD/Short_Z_Joints.step +description: Shorter Z joints for the v2.4 +images: +- Images/Side-By-Side.png +- Images/Side-By-Side-Cross-Section.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Short Z Joints diff --git a/printer_mods/Ellis/Single_MGN9H_Carriage/.metadata.yml b/printer_mods/Ellis/Single_MGN9H_Carriage/.metadata.yml new file mode 100644 index 000000000..f533eabcd --- /dev/null +++ b/printer_mods/Ellis/Single_MGN9H_Carriage/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- CAD/Single_MGN9H_Carriage_CW2.f3d +- CAD/Single_MGN9H_Carriage_CW1.f3d +- CAD/Single_MGN9H_Carriage_CW2.step +- CAD/Single_MGN9H_Carriage_CW1.step +description: Single MGN9H toolhead carriage with toolhead x endstop support (for umbilical) +images: +- Images/Single_MGN9H_Carriage_CW2.png +- Images/Single_MGN9H_Carriage_CW1.png +- Images/Single_MGN9H_Carriage_CW1_Built.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: Single MGN9H Carriage diff --git a/printer_mods/Empusas/BTT_Filament_Motion_Sensor_Mount/.metadata.yml b/printer_mods/Empusas/BTT_Filament_Motion_Sensor_Mount/.metadata.yml new file mode 100644 index 000000000..513eb0444 --- /dev/null +++ b/printer_mods/Empusas/BTT_Filament_Motion_Sensor_Mount/.metadata.yml @@ -0,0 +1,17 @@ +cad: [] +description: Mounts for Big Tree Tech Smart Filament Motion Sensor +images: +- SKR_2.png +- SKRV1_4.png +- Mount_B.png +- Mount_A.png +- IMG_2385.png +- BTT_Sensor.png +- IMG_2384.png +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VSW +title: Mounts for BTT Filament Motion Sensor diff --git a/printer_mods/Empusas/PowerSkirt_FN284-10-06/.metadata.yml b/printer_mods/Empusas/PowerSkirt_FN284-10-06/.metadata.yml new file mode 100644 index 000000000..ff02081b1 --- /dev/null +++ b/printer_mods/Empusas/PowerSkirt_FN284-10-06/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Power Skirt for Schaffner FN284-10-06 V2.x +images: +- Screen_Shot_FN284_2.png +- Screen_Shot_FN284_3.png +- Screen_Shot_FN284_1.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Power Skirt 2.x FN284-10-06 diff --git a/printer_mods/Empusas/Terminal_Blocks_NC933_SPL-62/.metadata.yml b/printer_mods/Empusas/Terminal_Blocks_NC933_SPL-62/.metadata.yml new file mode 100644 index 000000000..c2ff4324c --- /dev/null +++ b/printer_mods/Empusas/Terminal_Blocks_NC933_SPL-62/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress +images: +- IMG_2333.png +- IMG_2334.png +- IMG_2335.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Mounts for Terminal Blocks NC933 SPL-62 diff --git a/printer_mods/Fiction/C270_mount/.metadata.yml b/printer_mods/Fiction/C270_mount/.metadata.yml new file mode 100644 index 000000000..cc10cbfcd --- /dev/null +++ b/printer_mods/Fiction/C270_mount/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/C270_assembly.step +- CAD/C270_assembly.f3d +description: Logitech C270 webcam front-centre mount +images: +- Images/C270_pin.jpg +- Images/C270_focusing_ring.png +- Images/C270_mount.png +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: C270 mount diff --git a/printer_mods/Fiction/Crossrail/.metadata.yml b/printer_mods/Fiction/Crossrail/.metadata.yml new file mode 100644 index 000000000..ced4ff9f0 --- /dev/null +++ b/printer_mods/Fiction/Crossrail/.metadata.yml @@ -0,0 +1,19 @@ +cad: +- CAD/Crossrail.f3d +- CAD/Crossrail.step +description: Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets +images: +- images/DRP-03_01.jpg +- images/DRP-03_02.jpg +- images/DRP-03_03.jpg +- images/crossrail_installed.jpg +- images/crossrail_04.jpg +- images/crossrail_05.jpg +- images/crossrail_02.jpg +- images/crossrail_03.jpg +- images/crossrail_01.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: Crossrail diff --git a/printer_mods/Fiction/Exhaust_cover/.metadata.yml b/printer_mods/Fiction/Exhaust_cover/.metadata.yml new file mode 100644 index 000000000..983b21a44 --- /dev/null +++ b/printer_mods/Fiction/Exhaust_cover/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/Exhaust_cover.f3d +- CAD/Exhaust_cover.step +description: Cover for exhaust cutout in back panel +images: +- Images/exhaust_cover_photo_02.jpg +- Images/exhaust_cover_photo_01.jpg +- Images/exhaust_cover_02.png +- Images/exhaust_cover_01.png +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: Exhaust_cover diff --git a/printer_mods/Fiction/Exhaust_cover_SFS/.metadata.yml b/printer_mods/Fiction/Exhaust_cover_SFS/.metadata.yml new file mode 100644 index 000000000..21665b618 --- /dev/null +++ b/printer_mods/Fiction/Exhaust_cover_SFS/.metadata.yml @@ -0,0 +1,17 @@ +cad: +- CAD/Exhaust_cover_SFS.f3d +- CAD/Exhaust_cover_SFS.step +description: Exhaust cover and BTT Smart Filament Sensor mount +images: +- Images/Exhaust_cover_SFS_04.jpg +- Images/Exhaust_cover_SFS_06.jpg +- Images/Exhaust_cover_SFS_07.jpg +- Images/exhaust_cover_sfs_photo_01.jpg +- Images/SFF_wiring_02.jpg +- Images/SFF_wiring_01.jpg +- Images/Exhaust_cover_SFS_08.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: Exhaust_cover_SFS diff --git a/printer_mods/Fiction/LGX_Lite_toolhead_PCB_mount/.metadata.yml b/printer_mods/Fiction/LGX_Lite_toolhead_PCB_mount/.metadata.yml new file mode 100644 index 000000000..ba47cf0a0 --- /dev/null +++ b/printer_mods/Fiction/LGX_Lite_toolhead_PCB_mount/.metadata.yml @@ -0,0 +1,17 @@ +cad: +- CAD/LGX_toolhead_PCB_mount_assembly.step +description: Mount for Hartk's toolhead PCB(s) for LGX Lite +images: +- Images/LGX_Lite_toolhead_PCB_mount_photo_01.jpg +- Images/github_download.png +- Images/LGX_Lite_toolhead_PCB_mount_06.png +- Images/LGX_Lite_toolhead_PCB_mount_07.png +- Images/LGX_Lite_toolhead_PCB_mount_05.png +- Images/LGX_Lite_toolhead_PCB_mount_01.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +- VT +title: LGX Lite toolhead PCB mount diff --git a/printer_mods/FreeformFez/FilteredPower/.metadata.yml b/printer_mods/FreeformFez/FilteredPower/.metadata.yml new file mode 100644 index 000000000..830ce7cb0 --- /dev/null +++ b/printer_mods/FreeformFez/FilteredPower/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- Parametric Filtered Power v1.8.f3d +description: V1.6 Filtered Inlet and Rocker Switch for V1.8 +images: +- pictures/Back.png +- pictures/Front.png +mod_version: 1 +printer_compatibility: +- V1.8 +title: V1.8 Filtered Power Inlet diff --git a/printer_mods/GSL12/pocketwatch_nema17/.metadata.yml b/printer_mods/GSL12/pocketwatch_nema17/.metadata.yml new file mode 100644 index 000000000..7920c5af4 --- /dev/null +++ b/printer_mods/GSL12/pocketwatch_nema17/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe for + V0 fork with 2020 extrusions, Nema17 and MGN9 or other printers. +images: +- media/pw_nema17.jpg +mod_version: 1 +printer_compatibility: [] +title: Pocketwatch Nema 17 diff --git a/printer_mods/GadgetAngel/Bed_Support_Alignment_Tools/.metadata.yml b/printer_mods/GadgetAngel/Bed_Support_Alignment_Tools/.metadata.yml new file mode 100644 index 000000000..38f36b58e --- /dev/null +++ b/printer_mods/GadgetAngel/Bed_Support_Alignment_Tools/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/Bed_Support_Alignment_Tools_v15.f3d +description: The bed support alignment tools will assist in helping align the "bed + support extrusions" to the frame. When the alignment tools are placed in all four + corners of the Voron Printer's frame the "bed support extrusions" will butt up against + these tools so that you can screw the "bed support extrusions" down to the printer's + frame in the correct position. +images: +- images/Bed_Suport_Alignment_Tools_each_pointed_out.jpg +- images/Bed_Support_Alignment_Tools.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Bed Support Extrusions Alignment Tools diff --git a/printer_mods/GadgetAngel/Cricut_Voron_Logos/.metadata.yml b/printer_mods/GadgetAngel/Cricut_Voron_Logos/.metadata.yml new file mode 100644 index 000000000..2e7dd1cfc --- /dev/null +++ b/printer_mods/GadgetAngel/Cricut_Voron_Logos/.metadata.yml @@ -0,0 +1,116 @@ +cad: [] +description: For any cutting machines or machines that rely on vector graphics and + use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron + 2.4, Voron SwitchWire, Voron 0.0/0.1. and Trident These .svg files use a minimal + amount of anchor points to achieve the vector shapes! +images: +- VSWL/1ColorLayerWOLogoWOSil/VSWRearPWOWOSilBackP.jpg +- VSWL/1ColorLayerWOLogoWOSil/VSWRearPWOWOSil.jpg +- VSWL/1ColorLayerWOLogoWOSil/VSWRearPWOWOSil.svg +- VSWL/1ColorLayerWOLogoWithSil/VSWRearPWOWithSil.svg +- VSWL/1ColorLayerWOLogoWithSil/VSWRearPWOWithSil.jpg +- VSWL/1ColorLayer/VSWRearP.svg +- VSWL/1ColorLayer/VSWRearPlay.svg +- VSWL/1ColorLayer/VSWRearP.jpg +- VSWL/1ColorLayer/VSWRearP.png +- images/V0.1woWOSilBackP.jpg +- images/Trident_DLogo.png +- images/QWComplexVL.jpg +- images/CombinedRedPath.png +- images/V0.1woWOSil.jpg +- images/V2.4_1Color.jpg +- images/V2.4_1ColorWOWithSil.jpg +- images/Trident_DLogo_250_Rear_Panel.stl.png +- images/VSWRearPWOWOSilhBackP.jpg +- images/Trident_DLogo_CAD.stl.png +- images/VSWRearP.jpg +- images/V0.1woWithSil.jpg +- images/QWPlainVL2.png +- images/QWPlainVL.png +- images/Trident_DLogo_WOHexOutline2jpg.jpg +- images/V2.4_1ColorWOWOSil.jpg +- images/VSWRearPWOWOSil.jpg +- images/VDesignPlainL.jpg +- images/250_rear.jpg +- images/VSWRearPWOWithSil.jpg +- images/V2.4_3Color.jpg +- VPlainL/1ColorLayer/VDesignPlainLorig.png +- VPlainL/1ColorLayer/VDesignPlainL[Converted].svg +- VPlainL/1ColorLayer/VDesignPlainL.png +- VPlainL/1ColorLayer/VDesignPlainL.jpg +- V2.4QueenL/QWComplexVL/QWComplexVL.jpg +- V2.4QueenL/QWComplexVL/QWComplexVL.svg +- V2.4QueenL/QWComplexVL/QWComplexVLBackP_RGB.jpg +- V2.4QueenL/QWComplexVL/V2.4_3Color.svg +- V2.4QueenL/QWiPlainVL/VDesignPlainLConverted.svg +- V2.4QueenL/QWiPlainVL/AllPaths[Converted].svg +- V2.4QueenL/QWiPlainVL/QWPlainVL.png +- V2.4QueenL/QWPlainVL2/QWPlainVL2.png +- V2.4QueenL/QWPlainVL2/QWPlainVL2.svg +- V2.4QueenL/V2.4BackPanel/V2.4_3ColorBackP_RGB.jpg +- V2.4QueenL/V2.4BackPanel/V2.4_3Color.svg +- V2.4QueenL/V2.4BackPanel/V2.4_3Color.jpg +- V2.4L/3ColorLayers/V2.4_3ColorBackP_RGB.jpg +- V2.4L/3ColorLayers/V2.4_3Color.svg +- V2.4L/3ColorLayers/V2.4_3Color.jpg +- V2.4L/1ColorLayerWOWithSil/V2.4_1ColorWOWithSil.svg +- V2.4L/1ColorLayerWOWithSil/V2.4_1ColorWOWithSil.jpg +- V2.4L/1ColorLayer/V2.4_1Color.svg +- V2.4L/1ColorLayer/V2.4_1Color.jpg +- V2.4L/1ColorLayer/1Color900ppiB&W.jpg +- V2.4L/1ColorLayerWOWOSil/V2.4WOWOSil.svg +- V2.4L/1ColorLayerWOWOSil/V2.4WOWOSil.jpg +- V0.1L/1ColorLayerWOWithSil/V0.1WOWithSil.svg +- V0.1L/1ColorLayerWOWithSil/V0.1WOWithSil.jpg +- V0.1L/1ColorLayer/CombinedRedPathLay.png +- V0.1L/1ColorLayer/Boarderonly.svg +- V0.1L/1ColorLayer/CombinedRedPath.svg +- V0.1L/1ColorLayer/CombinedRedPathLay.svg +- V0.1L/1ColorLayer/Partsonly.svg +- V0.1L/1ColorLayer/CombinedRedPathLayout.png +- V0.1L/1ColorLayer/CombinedRedPathLayout.svg +- V0.1L/1ColorLayerWOWOSil/V0.1WOWOSilBackP.jpg +- V0.1L/1ColorLayerWOWOSil/V0.1WOWOSil.jpg +- V0.1L/1ColorLayerWOWOSil/V0.1WOWOSil.svg +- Voron_Trident/.stl_files/Trident_DLogo_250_deck_Panel.stl.png +- Voron_Trident/.stl_files/Trident_DLogo_250_Rear_Panel.stl.png +- Voron_Trident/.stl_files/Trident_DLogo_350_deck_Panel.stl.png +- Voron_Trident/.stl_files/Trident_DLogo_300_deck_Panel.stl.png +- Voron_Trident/RD_ALL_correct_dim/250_rear.jpg +- Voron_Trident/1ColorLayer/Trident_DLogo.png +- Voron_Trident/1ColorLayer/Trident_DLogo_WHex_CPaths.svg +- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/250_Panels_SVG_Files/Trident_DLogo_250_rear_WithHex.svg +- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/250_Panels_SVG_Files/Trident_DLogo_250_deck_WithHex.svg +- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/250_Panels_SVG_Files/Trident_DLogo_250_deck_WithHex.jpg +- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/250_Panels_SVG_Files/Trident_DLogo_250_rear_WithHex.jpg +- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/300_Panels_SVG_Files/Trident_DLogo_300_rear_WithHex.jpg +- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/300_Panels_SVG_Files/Trident_DLogo_300_deck_WithHex.jpg +- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/300_Panels_SVG_Files/Trident_DLogo_300_deck_WithHex.svg +- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/300_Panels_SVG_Files/Trident_DLogo_300_rear_WithHex.svg +- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/350_Panels_SVG_Files/Trident_DLogo_350_rear_WithHex.jpg +- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/350_Panels_SVG_Files/Trident_DLogo_350_deck_WithHex.jpg +- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/350_Panels_SVG_Files/Trident_DLogo_350_deck_WithHex.svg +- Voron_Trident/1ColorLayer/.svg_files_diff_Panels/350_Panels_SVG_Files/Trident_DLogo_350_rear_WithHex.svg +- Voron_Trident/1ColorLayerWOWOSil/Trident_DLogo_WOHex_CPath.svg +- Voron_Trident/1ColorLayerWOWOSil/Trident_DLogo_WOHexOutline2jpg.jpg +- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_DLogo_250_deck.jpg +- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_DLogo_250_rear.jpg +- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_300_SVG_Files/Trident_DLogo_300_rear.svg +- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_300_SVG_Files/Trident_DLogo_300_deck.svg +- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_300_SVG_Files/Trident_DLogo_300_deck.jpg +- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_300_SVG_Files/Trident_DLogo_300_rear.jpg +- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_350_SVG_Files/Trident_DLogo_350_deck.jpg +- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_350_SVG_Files/Trident_DLogo_350_rear.jpg +- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_350_SVG_Files/Trident_DLogo_350_rear.svg +- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_350_SVG_Files/Trident_DLogo_350_deck.svg +- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_250_SVG_Files/Trident_DLogo_250_deck.jpg +- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_250_SVG_Files/Trident_DLogo_250_rear.jpg +- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_250_SVG_Files/Trident_DLogo_250_rear.svg +- Voron_Trident/1ColorLayerWOWOSil/.svg_files_diff_Panels/Trident_250_SVG_Files/Trident_DLogo_250_deck.svg +mod_version: 1 +printer_compatibility: +- V0.2 +- V2.4 +- VSW +- VT +title: Cricut Voron Logos diff --git a/printer_mods/Galvanic/Bowden_Tube_Guide/.metadata.yml b/printer_mods/Galvanic/Bowden_Tube_Guide/.metadata.yml new file mode 100644 index 000000000..d54cd9f78 --- /dev/null +++ b/printer_mods/Galvanic/Bowden_Tube_Guide/.metadata.yml @@ -0,0 +1,16 @@ +cad: +- CAD/Bowden_Guide.step +description: Bowden tube guide and CANBUS wire support +images: +- IMAGES/Tube1.jpg +- IMAGES/chirpy.jpg +- IMAGES/Tube_Guide.png +- IMAGES/Short.jpg +- IMAGES/Dokuu.jpg +- IMAGES/chirpy2.jpg +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: Bowden Tube Guide diff --git a/printer_mods/GiulianoM/FlyF407ZG/.metadata.yml b/printer_mods/GiulianoM/FlyF407ZG/.metadata.yml new file mode 100644 index 000000000..1671624b6 --- /dev/null +++ b/printer_mods/GiulianoM/FlyF407ZG/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- Fly-F407ZG-Mount-v3.f3d +description: 'Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG' +images: +- Fly-F407ZG-Mounted.jpg +- Fly-F407ZG-Printed.jpg +- FlyF407ZG.PNG +mod_version: 1 +printer_compatibility: +- V2.4 +title: Fly F407ZG Mount diff --git a/printer_mods/Gizzle/ender-3_(pro)_switchwire/.metadata.yml b/printer_mods/Gizzle/ender-3_(pro)_switchwire/.metadata.yml new file mode 100644 index 000000000..e14472ff4 --- /dev/null +++ b/printer_mods/Gizzle/ender-3_(pro)_switchwire/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- CAD/Ender3SW v2.f3d +description: Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics and + most other parts of the Voron Switchwire. +images: +- IMAGES/BOTTOM.PNG +- IMAGES/LEFT.PNG +- IMAGES/General.PNG +- IMAGES/BACK.PNG +- IMAGES/RIGHT.PNG +- IMAGES/FRONT.PNG +mod_version: 1 +printer_compatibility: +- VSW +title: Ender 3 and Ender 3 Pro Switchwire Mod diff --git a/printer_mods/Hobson318/Belt_Tension_Wrench/.metadata.yml b/printer_mods/Hobson318/Belt_Tension_Wrench/.metadata.yml new file mode 100644 index 000000000..8dd743c5c --- /dev/null +++ b/printer_mods/Hobson318/Belt_Tension_Wrench/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- belt_wrench_v4.step +description: Wrench for easier turning of the belt tension knobs on V0.1 +images: +- Images/Tool.jpg +- Images/Tool_2.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Belt Tension Wrench diff --git a/printer_mods/Hobson318/Klipper_Expander_Mount/.metadata.yml b/printer_mods/Hobson318/Klipper_Expander_Mount/.metadata.yml new file mode 100644 index 000000000..2b3916adb --- /dev/null +++ b/printer_mods/Hobson318/Klipper_Expander_Mount/.metadata.yml @@ -0,0 +1,16 @@ +cad: +- STM32_Klipper_Expander_v5.step +- STM32_Klipper_Expander_No_Holes_v2.step +description: Mounting brackets for the klipper expander using vhb tape or mounting + screws +images: +- Images/Mount_Top.jpg +- Images/Mount_Side.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VSW +- VT +title: Klipper Expander Mount diff --git a/printer_mods/Iakabos/C920_mount/.metadata.yml b/printer_mods/Iakabos/C920_mount/.metadata.yml new file mode 100644 index 000000000..bf1ed22a9 --- /dev/null +++ b/printer_mods/Iakabos/C920_mount/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Slim mount for logitech c920 webcam +images: [] +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: c920 Mount diff --git a/printer_mods/Iakabos/V0_beltchain/.metadata.yml b/printer_mods/Iakabos/V0_beltchain/.metadata.yml new file mode 100644 index 000000000..930051225 --- /dev/null +++ b/printer_mods/Iakabos/V0_beltchain/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: Modified beltchain parts for V0 Z cables +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 beltchains diff --git a/printer_mods/JD/RefillPlease/.metadata.yml b/printer_mods/JD/RefillPlease/.metadata.yml new file mode 100644 index 000000000..d3b081f58 --- /dev/null +++ b/printer_mods/JD/RefillPlease/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- CAD/RefillPlease_v20.f3d +description: Replace the 2.4 stock bowden tube holder and add a filament runout sensor +images: +- images/refillplease.png +- images/lever.png +- images/Overview.png +- images/notch.png +- images/interior90.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: V2.4 Filament runout sensor diff --git a/printer_mods/JJFX/CRTouch_Snap_Mount/.metadata.yml b/printer_mods/JJFX/CRTouch_Snap_Mount/.metadata.yml new file mode 100644 index 000000000..ffceb3c4c --- /dev/null +++ b/printer_mods/JJFX/CRTouch_Snap_Mount/.metadata.yml @@ -0,0 +1,20 @@ +cad: [] +description: Mount to replace v2.4 (MGN9) probe with a Creality CR Touch +images: +- Images/CRTouch-Front_sm.JPG +- Images/CRTouch_Prep3_sm.jpg +- Images/CRTouch-rear2_sm.JPG +- Images/CRTouch_Prep1_sm.jpg +- Images/CRTouch-b1_install1_sm.JPG +- Images/CRTouch-ex2_sm.jpg +- Images/CRTouch_Inserts1_sm.jpg +- Images/CRTouch-b1_explode_sm.JPG +- Images/CRTouch_Prep0_sm.jpg +- Images/CRTouch-wire1_sm.jpg +- Images/CRTouch-ex1_sm.jpg +- Images/CRTouch-b1_install2_sm.JPG +- Images/CRTouch-ex3_sm.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: 'V2.4 CR Touch Snap Mount ' diff --git a/printer_mods/JNP/Back-Door/.metadata.yml b/printer_mods/JNP/Back-Door/.metadata.yml new file mode 100644 index 000000000..7a4eb1c78 --- /dev/null +++ b/printer_mods/JNP/Back-Door/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/Handle_Mini_Backdoor.step +- CAD/Back_Door.step +- CAD/Door_Latch_x2.step +description: Door for easy hardware access +images: +- Images/2.jpg +- Images/3.jpg +- Images/1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Back Door diff --git a/printer_mods/JNP/Deck_Panel_Rear/.metadata.yml b/printer_mods/JNP/Deck_Panel_Rear/.metadata.yml new file mode 100644 index 000000000..9a1acfd31 --- /dev/null +++ b/printer_mods/JNP/Deck_Panel_Rear/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- CAD/Deck_Panel_Rear.step +description: Covers the hotbed cables +images: +- Images/Deck_panel_Rear.jpg +- Images/1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Deck Panel diff --git a/printer_mods/JNP/Drawer/.metadata.yml b/printer_mods/JNP/Drawer/.metadata.yml new file mode 100644 index 000000000..d141d65aa --- /dev/null +++ b/printer_mods/JNP/Drawer/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/Drawer_Version_C.step +- CAD/Drawer_Version_B.step +- CAD/Drawer_Version_A.step +description: Drawer in four different versions +images: +- Images/4.jpg +- Images/2.jpg +- Images/3.jpg +- Images/1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Drawer diff --git a/printer_mods/JNP/Front-Door/.metadata.yml b/printer_mods/JNP/Front-Door/.metadata.yml new file mode 100644 index 000000000..f467ed232 --- /dev/null +++ b/printer_mods/JNP/Front-Door/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/Handle_Mini_Front.step +- CAD/Door Frame.step +- CAD/Door_Latch_x2.step +description: Door in a frame +images: +- Images/2.jpg +- Images/1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Front Door diff --git a/printer_mods/JNP/HEPA-Filter/.metadata.yml b/printer_mods/JNP/HEPA-Filter/.metadata.yml new file mode 100644 index 000000000..c54160081 --- /dev/null +++ b/printer_mods/JNP/HEPA-Filter/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/Filter Cage.step +- CAD/Fan Mounting.step +- CAD/HEPA_Filter.step +description: "Filter case with fan\xB4s" +images: +- Images/1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Hepa Filter diff --git a/printer_mods/JNP/Mid-Panel/.metadata.yml b/printer_mods/JNP/Mid-Panel/.metadata.yml new file mode 100644 index 000000000..30bcb5458 --- /dev/null +++ b/printer_mods/JNP/Mid-Panel/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/Mid_Panel_with_cablemanagement.step +- CAD/Mid_Panel.step +description: Panel for SKR1.4/1.4 or SKR E3 mini mount +images: +- Images/2.jpg +- Images/3.JPG +- Images/1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Mid Panel diff --git a/printer_mods/JNP/Neopixel-Y_Rails/.metadata.yml b/printer_mods/JNP/Neopixel-Y_Rails/.metadata.yml new file mode 100644 index 000000000..a9600fa5e --- /dev/null +++ b/printer_mods/JNP/Neopixel-Y_Rails/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: "mounting for Neopixel strip with 8 LED\xB4s" +images: +- Images/2.jpg +- Images/3.jpg +- Images/1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Neopixel Case diff --git a/printer_mods/JNP/Side-Panels/.metadata.yml b/printer_mods/JNP/Side-Panels/.metadata.yml new file mode 100644 index 000000000..cf2762a81 --- /dev/null +++ b/printer_mods/JNP/Side-Panels/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/Panel right.step +- CAD/Panel left.step +description: Panels with intergrated hinge +images: +- Images/4.jpg +- Images/5.jpg +- Images/2.jpg +- Images/3.jpg +- Images/1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Side Panels diff --git a/printer_mods/Jasrags/sw_fee_slot_filament_passthrough/.metadata.yml b/printer_mods/Jasrags/sw_fee_slot_filament_passthrough/.metadata.yml new file mode 100644 index 000000000..a8d449b01 --- /dev/null +++ b/printer_mods/Jasrags/sw_fee_slot_filament_passthrough/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- CAD/Feed_Slot_v7.f3d +- CAD/Feed_Slot_v7.step +description: A feed slot with a filament pass-through +images: +- images/Mounted_1.png +- images/CAD_offset_profile.png +- images/Mounted_2.png +- images/CAD_front_profile.png +- images/CAD_bottom_profile.png +- images/CAD_side_profile.png +mod_version: 1 +printer_compatibility: +- VSW +title: Feed slot with filament pass-through diff --git a/printer_mods/JeremyRuhland/V2.4_Plug_Panel_Generic_Combo/.metadata.yml b/printer_mods/JeremyRuhland/V2.4_Plug_Panel_Generic_Combo/.metadata.yml new file mode 100644 index 000000000..bfca28a89 --- /dev/null +++ b/printer_mods/JeremyRuhland/V2.4_Plug_Panel_Generic_Combo/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- cad/plug_panel_generic_combo.f3d +description: Skirt power panel for generic amazon plug/switch/fuse combo module, with + 2 keystone sockets +images: +- img/plug_panel.jpg +- img/AC19A10-G8.jpg +- img/plug_panel_generic_combo.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: V2.4 Plug Panel Generic Combo diff --git a/printer_mods/Jon/1515_led_mount/.metadata.yml b/printer_mods/Jon/1515_led_mount/.metadata.yml new file mode 100644 index 000000000..f13ecfd4e --- /dev/null +++ b/printer_mods/Jon/1515_led_mount/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/v0_1515_led_diffuser_assembly.f3d +- CAD/v0_1515_led_diffuser_assembly.step +description: Snap in 1515 Led mount for WS2812B +images: +- IMG/colors.jpg +- IMG/led_strip.jpg +- IMG/wiring.jpg +- IMG/print_finish.gif +mod_version: 1 +printer_compatibility: +- V0.2 +title: 1515 LED Mount diff --git a/printer_mods/Jon/adxl345_skirt_keystone/.metadata.yml b/printer_mods/Jon/adxl345_skirt_keystone/.metadata.yml new file mode 100644 index 000000000..9fd3010f3 --- /dev/null +++ b/printer_mods/Jon/adxl345_skirt_keystone/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Skirt keystone for ADXL345 using Microfit 3.0 +images: +- IMG/skirt.keystone.adxl345.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: adxl345 skirt keystone diff --git a/printer_mods/JosAr/Klicky-Probe/.metadata.yml b/printer_mods/JosAr/Klicky-Probe/.metadata.yml new file mode 100644 index 000000000..459552155 --- /dev/null +++ b/printer_mods/JosAr/Klicky-Probe/.metadata.yml @@ -0,0 +1,85 @@ +cad: +- CAD/Voron_KlickyProbe_v2_v56.step +description: Microswitch based inductive probe replacement +images: +- Printers/v0/Photos/klicky_v0.jpg +- Printers/v0/Photos/V0_dock.jpg +- Printers/v0/Photos/V0.1_probe_mount_3.jpg +- Printers/v0/Photos/probe_wires_detail.png +- Printers/v0/Photos/V0.1_probe_mount_2.jpg +- Printers/v0/Photos/DockMount_fixed.jpg +- Printers/v0/Photos/integrated_mount.jpg +- Printers/v0/Photos/V0.1_probe_mount_1.jpg +- Printers/v0/Photos/V0_probedock_mount.jpg +- Printers/v0/Photos/integrated_cowling_wklicky.jpg +- Printers/v0/Photos/V0.1_complete.jpg +- Printers/v0/Photos/front_cowling_mount.jpg +- Printers/v0/Photos/front_cowling_mount_back.jpg +- Printers/v0/Photos/DockMount_TopScrews.jpg +- Printers/v0/Photos/dockmount_attached.jpg +- Printers/v0/Photos/Fan_duct_v0_mounted.jpg +- Printers/v0/Photos/V0_probe_3.jpg +- Printers/v0/Photos/V0_probe_2.jpg +- Printers/v0/Photos/V0_probe_1.jpg +- Printers/v0/Photos/V0_probe_5.jpg +- Printers/v0/Photos/V0.1_umbilical.jpg +- Printers/v0/Photos/Klicky_v0_family.jpg +- Printers/v0/Photos/V0_probe_4.jpg +- Printers/v0/Photos/DockMount_SideScrews.jpg +- Printers/v0/Photos/v0_eletronic.JPG +- Printers/v0/Photos/V0.1_back.jpg +- Printers/v0/Photos/DockMount_extrabeef.jpg +- Printers/v0/Photos/V0.1_attached.jpg +- Printers/v0/Photos/V0.1_front_cowling_mount.jpg +- Printers/v0/Photos/V0_dock_mount.png +- Printers/v0/Photos/V0_dock_mount.jpg +- Printers/v0/Photos/Fan_duct_v0_wklicky.jpg +- Printers/v0/Photos/DockMount_variable.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_Mount_wiring_1.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/Probe_topside.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/Fixed_sidemount_left.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_Mount_wiring_3.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_Mount_wiring_2.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/DockMount.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/Klicky_probe_press_Helper.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_mount_press_Helper.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_Mount_wiring_4.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/legacy_fixedmount.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_Mount_wiring_complete.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/Klicky_Probe.png +- Printers/v1.8_v2.4_Legacy_Trident/Photos/Klicky_Probe_recommended_printing_orientation.png +- Printers/v1.8_v2.4_Legacy_Trident/Photos/Gantry_Sidemount_installed.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_v1_underside_marked_magnets.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_mount_press_Helper_inuseBack.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/klicky_v1.8_v2.4_Legacy_Trident.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/Klicky_Probe installed.png +- Printers/v1.8_v2.4_Legacy_Trident/Photos/Probe_MStoArrow_alignment.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/AB_mount_press_Helper_inuseTop.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_dock_complete.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/Klicky_probe_press_Helper_inuse.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/Voron_V2.4_300mm_back.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_dock_components.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/Fixed_sidemount_right.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_components.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_v1_underside.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_dock_2.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/Voron_Klicky_Probe.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_install.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/Fixed_mount_complete.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_complete.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/Variable_mount_complete.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/DockMountandProbeMount.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/ABMountInstalled.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/probe_dock_1.jpg +- Printers/v1.8_v2.4_Legacy_Trident/Photos/ABMountCheckforContiuity.jpg +- Photos/Klicky_Probe.png +- Photos/Klicky_Probe_recommended_printing_orientation.png +- Photos/Voron_V2.4_300mm_back.jpg +- Photos/klicky_base.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VT +title: Klicky Probe diff --git a/printer_mods/KenadyDwag44/sw_lightbar/.metadata.yml b/printer_mods/KenadyDwag44/sw_lightbar/.metadata.yml new file mode 100644 index 000000000..57bfd0f4f --- /dev/null +++ b/printer_mods/KenadyDwag44/sw_lightbar/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: A LED lightbar for switchwire +images: +- photos/IMG_2278.jpg +mod_version: 1 +printer_compatibility: +- VSW +title: Switchwire Lightbar diff --git a/printer_mods/KevinAkaSam/VEFACH/.metadata.yml b/printer_mods/KevinAkaSam/VEFACH/.metadata.yml new file mode 100644 index 000000000..3a6068132 --- /dev/null +++ b/printer_mods/KevinAkaSam/VEFACH/.metadata.yml @@ -0,0 +1,20 @@ +cad: [] +description: Voron Exhaust Filter Inserts for Activated Coal + Hepa +images: +- Images/VEFACH.png +- Images/4.jpg +- Images/5.jpg +- Images/CAD4.png +- Images/6.jpg +- Images/2.jpg +- Images/Trident_V2.png +- Images/CAD1.png +- Images/3.jpg +- Images/1.jpg +- Images/CAD3.png +- Images/CAD2.png +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: VEFACH diff --git a/printer_mods/KiloQubit/V0_reverse_bowden_mount/.metadata.yml b/printer_mods/KiloQubit/V0_reverse_bowden_mount/.metadata.yml new file mode 100644 index 000000000..05a70f08b --- /dev/null +++ b/printer_mods/KiloQubit/V0_reverse_bowden_mount/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- V0_reverse_bowden_mount.step +- V0_reverse_bowden_mount.f3d +description: V0 reverse bowden mount +images: +- mount_and_filament.jpg +- mount.jpg +- mount_filament_centered.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Reverse Bowden Mount diff --git a/printer_mods/KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts/.metadata.yml b/printer_mods/KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts/.metadata.yml new file mode 100644 index 000000000..5b8cce1f6 --- /dev/null +++ b/printer_mods/KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- VORON_2.4_Z_Chain_3_Hole_Mounts.f3d +description: Z chain mounts for 3 hole generic chain +images: +- upper_mount.jpg +- z_chain.jpg +- lower_mount_inserts.jpg +- upper_mount_inserts.jpg +- upper_mount_with_chain.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: V2.4 Z Chain Mounts for 3 Hole Chains diff --git a/printer_mods/KiloQubit/trident_schurter_power_inlet/.metadata.yml b/printer_mods/KiloQubit/trident_schurter_power_inlet/.metadata.yml new file mode 100644 index 000000000..7fb618fcb --- /dev/null +++ b/printer_mods/KiloQubit/trident_schurter_power_inlet/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/trident_schurter_power_inlet.f3d +- CAD/trident_schurter_power_inlet.step +description: Trident inlet skirt for mounting a Schurter DD11.0124 or similar inlet +images: +- images/IMG_7703.JPG +- images/IMG_7702.JPG +- images/IMG_7701.JPG +- images/IMG_7776.JPG +mod_version: 1 +printer_compatibility: +- VT +title: Trident Schurter Inlet Skirt diff --git a/printer_mods/Koios/6mm_Glass/.metadata.yml b/printer_mods/Koios/6mm_Glass/.metadata.yml new file mode 100644 index 000000000..2e1fc969a --- /dev/null +++ b/printer_mods/Koios/6mm_Glass/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- STEPs/Lock_Body.step +- STEPs/Lock_Pin_A_x2.step +- STEPs/glass_rest.STEP +- STEPs/Lock_Pin_B_x2.step +description: Lock levers and rests for 6mm Tempered glass panels +images: +- Images/Glass.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: 6mm Tempered Glass Mod diff --git a/printer_mods/Koios/C920_Mount/.metadata.yml b/printer_mods/Koios/C920_Mount/.metadata.yml new file mode 100644 index 000000000..346c6642e --- /dev/null +++ b/printer_mods/Koios/C920_Mount/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- STEPs/C920_Top_Front_Mount.step +description: Low profile mount for a C920 Webcam +images: +- Images/FoV.png +- Images/MountingPosition.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: C920 Low Profile Mount diff --git a/printer_mods/Koios/LED_Mounts/.metadata.yml b/printer_mods/Koios/LED_Mounts/.metadata.yml new file mode 100644 index 000000000..d9ba74fd0 --- /dev/null +++ b/printer_mods/Koios/LED_Mounts/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- STEPs/LED_mount.step +description: Low profile mount for led bar lights +images: +- Images/FromAbove.jpg +- Images/FromBelow.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: LED Bar Mounts diff --git a/printer_mods/Koios/V0_C920_Tophat_Mount/.metadata.yml b/printer_mods/Koios/V0_C920_Tophat_Mount/.metadata.yml new file mode 100644 index 000000000..1c2289df1 --- /dev/null +++ b/printer_mods/Koios/V0_C920_Tophat_Mount/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- STEPs/v0_920_mount.STEP +- STEPs/Cable_Clip_Tophat_x2.STEP +- STEPs/Cable_Clip_Tophat_Corner_x2.STEP +description: Mounting bracket for a Logitech C920 on the tophat +images: +- Images/Cable_Routing.jpg +- Images/Mount.jpg +- Images/From_Above.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 C920 Tophat Mount diff --git a/printer_mods/Kosh42EFG/kirigami_bed_front/.metadata.yml b/printer_mods/Kosh42EFG/kirigami_bed_front/.metadata.yml new file mode 100644 index 000000000..3a79f1586 --- /dev/null +++ b/printer_mods/Kosh42EFG/kirigami_bed_front/.metadata.yml @@ -0,0 +1,8 @@ +cad: +- CAD/Front_Bed_Mount.f3d +description: Printed bed front for kirigami folded metal bed mount with Voron logo. +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: Kirigami bed front diff --git a/printer_mods/Kruppes/Closed_Bottom/.metadata.yml b/printer_mods/Kruppes/Closed_Bottom/.metadata.yml new file mode 100644 index 000000000..f78565de9 --- /dev/null +++ b/printer_mods/Kruppes/Closed_Bottom/.metadata.yml @@ -0,0 +1,15 @@ +cad: [] +description: Modified printed parts and panel to fully enclose V0. +images: +- Fancy_Panel/fancy_dimensions.png +- pictures/fancy_bottom.png +- pictures/side_view.png +- pictures/back_view.png +- pictures/simple_bottom.png +- pictures/back_photo.jpg +- pictures/bottom_photo.jpg +- Simple_Panel/simple_dimensions.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: Encosed Bottom diff --git a/printer_mods/Kruppes/Deck_Panel_inserts_logo/.metadata.yml b/printer_mods/Kruppes/Deck_Panel_inserts_logo/.metadata.yml new file mode 100644 index 000000000..6a6b1f33b --- /dev/null +++ b/printer_mods/Kruppes/Deck_Panel_inserts_logo/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- Deck_Panel_with_Logo.step +- Deck_Panel_no_Logo.step +description: Electronics Deck Panel using brass heat inserts. Optional with accent + color Voron Logo. +images: +- pictures/deck.png +- pictures/logo.png +- pictures/populated.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Printed Deck with inserts diff --git a/printer_mods/Kruppes/Tension_Meter/.metadata.yml b/printer_mods/Kruppes/Tension_Meter/.metadata.yml new file mode 100644 index 000000000..30d7aad08 --- /dev/null +++ b/printer_mods/Kruppes/Tension_Meter/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- Tension Meter.f3d +description: Print in place tension meter to easily tighten multiple belts to the + same tension +images: +- pictures/model.png +- pictures/installed.png +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VSW +title: Belt Tension Meter diff --git a/printer_mods/Kyleisah/CableGator/.metadata.yml b/printer_mods/Kyleisah/CableGator/.metadata.yml new file mode 100644 index 000000000..c5802d362 --- /dev/null +++ b/printer_mods/Kyleisah/CableGator/.metadata.yml @@ -0,0 +1,20 @@ +cad: +- F3D/CableGator.f3d +description: A cable comb for simplifying and tidying wire harnesses for printers + with drag chains +images: +- Images/Assembly1.png +- Images/Assembly2.png +- Images/Assembly3.png +- Images/Assembly4.png +- Images/LayingWires.png +- Images/StylishView.png +- Images/CHOMP.png +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VSW +- VT +title: CableGator Cable Comb diff --git a/printer_mods/LJ/Scrubby/.metadata.yml b/printer_mods/LJ/Scrubby/.metadata.yml new file mode 100644 index 000000000..a560d96fe --- /dev/null +++ b/printer_mods/LJ/Scrubby/.metadata.yml @@ -0,0 +1,17 @@ +cad: +- Scrubby.SLDPRT +- Scrubby.STEP +description: Easy to use filament dust filter +images: +- images/built.JPG +- images/back.PNG +- images/front.PNG +- images/irl.JPG +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VSW +- VT +title: Scrubby diff --git a/printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts/.metadata.yml b/printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts/.metadata.yml new file mode 100644 index 000000000..8c06f5427 --- /dev/null +++ b/printer_mods/Le0n/Magnetic_Panels_with_Magnet_Inserts/.metadata.yml @@ -0,0 +1,19 @@ +cad: +- CAD/Magnetic_Panels_with_Magnet_Inserts_v1.step +- CAD/Magnetic_Panels_with_Magnet_Inserts_v2.step +description: Magnetic panel mounts with magnets inserted into frame slots. +images: +- Images/magnetic-panel-and-inserts-5-full-install.png +- Images/magnetic-panel-and-inserts-1-magnet-insert.png +- Images/magnetic-panel-and-inserts-3-inserts-in-frame-2.png +- Images/magnetic-panel-and-inserts-4-clips-underside.png +- Images/magnetic-panel-and-inserts-0-installed-1.jpg +- Images/magnetic-panel-and-inserts-2-inserts-in-frame-1.png +- Images/magnetic-panel-and-inserts-0-installed-2.jpg +- Images/magnetic-panel-and-inserts-6-jig.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: Magnetic panels with Magnet Inserts diff --git a/printer_mods/LoCoCNC/3mm_tophat_panel_parts/.metadata.yml b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/.metadata.yml new file mode 100644 index 000000000..3c5b75e04 --- /dev/null +++ b/printer_mods/LoCoCNC/3mm_tophat_panel_parts/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: Required to use the 3mm (1/8") thick top hat panels for V0.1 +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: 3mm Top Hat Panels Clips diff --git a/printer_mods/LoCoCNC/MGN7H_Shims/.metadata.yml b/printer_mods/LoCoCNC/MGN7H_Shims/.metadata.yml new file mode 100644 index 000000000..1033de9c5 --- /dev/null +++ b/printer_mods/LoCoCNC/MGN7H_Shims/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: Shims for making bearing cartridges coplanar +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: MGN7H Shims diff --git a/printer_mods/LoCoCNC/Mosquito_PTFE_Cutting_Jig/.metadata.yml b/printer_mods/LoCoCNC/Mosquito_PTFE_Cutting_Jig/.metadata.yml new file mode 100644 index 000000000..7cef3b819 --- /dev/null +++ b/printer_mods/LoCoCNC/Mosquito_PTFE_Cutting_Jig/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: Tool to precicely cut 15mm PTFE Tube +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: Mosquito PTFE 15mm Tube Cutting Jig diff --git a/printer_mods/LoCoCNC/Strain_Relief_w_Microfit/.metadata.yml b/printer_mods/LoCoCNC/Strain_Relief_w_Microfit/.metadata.yml new file mode 100644 index 000000000..d070615b2 --- /dev/null +++ b/printer_mods/LoCoCNC/Strain_Relief_w_Microfit/.metadata.yml @@ -0,0 +1,11 @@ +cad: [] +description: Strain Relief with 10 pin Microfit connector +images: +- Images/pic1.JPG +- Images/pic3.JPG +- Images/pic2.JPG +- Images/remove.JPG +mod_version: 1 +printer_compatibility: +- V0.2 +title: Strain Relief w/ 10 Pin Microfit diff --git a/printer_mods/LoCoCNC/ssr_strap/.metadata.yml b/printer_mods/LoCoCNC/ssr_strap/.metadata.yml new file mode 100644 index 000000000..ed578a58d --- /dev/null +++ b/printer_mods/LoCoCNC/ssr_strap/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: Mounting Strap for SSR on 1515 Extrusions +images: +- ssr_strap2.JPG +- ssr_strap.JPG +mod_version: 1 +printer_compatibility: +- V0.2 +title: SSR Mounting Strap diff --git a/printer_mods/LoCoCNC/wire_grommets/.metadata.yml b/printer_mods/LoCoCNC/wire_grommets/.metadata.yml new file mode 100644 index 000000000..2d5556af9 --- /dev/null +++ b/printer_mods/LoCoCNC/wire_grommets/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: Safely capture your bed wires thru the bottom panel +images: +- images/elec_bay_side.jpg +- images/chamber_side.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: V2.4 Bed Wiring Grommet diff --git a/printer_mods/LoganFraser/ComboInlet/.metadata.yml b/printer_mods/LoganFraser/ComboInlet/.metadata.yml new file mode 100644 index 000000000..2ec829c4d --- /dev/null +++ b/printer_mods/LoganFraser/ComboInlet/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/Trident_2.4_ComboInletSkirt v8.f3d +- CAD/Trident_2.4_ComboInletSkirt v8.step +description: Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes. +images: +- BothInlet.png +- ComboInlets.png +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: ComboInlet diff --git a/printer_mods/LoganFraser/HorseshoeSpoolHolder/.metadata.yml b/printer_mods/LoganFraser/HorseshoeSpoolHolder/.metadata.yml new file mode 100644 index 000000000..fc4fd07ac --- /dev/null +++ b/printer_mods/LoganFraser/HorseshoeSpoolHolder/.metadata.yml @@ -0,0 +1,17 @@ +cad: +- CAD/HorseshoeSpoolHolder_v10.f3d +- CAD/HorseshoeSpoolHolder_v10.step +description: Horseshoe Spool Holder - mounts internally for Trident, or externally + for V0, V1, or V2 printers. +images: +- ES.png +- PB.png +- TIS.png +- TI.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VT +title: HorseshoeSpoolHolder diff --git a/printer_mods/LoganFraser/PiPlate/.metadata.yml b/printer_mods/LoganFraser/PiPlate/.metadata.yml new file mode 100644 index 000000000..de215dbc2 --- /dev/null +++ b/printer_mods/LoganFraser/PiPlate/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- PiPlate_v16.f3d +- PiPlate_v16.step +description: PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for V2.4/Trident +images: +- PiPlate2.jpg +- PiPlate.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: PiPlate diff --git a/printer_mods/LoganFraser/TridentInvertedElectronics/.metadata.yml b/printer_mods/LoganFraser/TridentInvertedElectronics/.metadata.yml new file mode 100644 index 000000000..d5dbb6217 --- /dev/null +++ b/printer_mods/LoganFraser/TridentInvertedElectronics/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- Trident_r2_Inverted_Electronics_v3.f3d +- Trident_r2_Inverted_Electronics_v3.step +description: Flip the Trident electronics bay for top access. +images: +- InvertedElectronics.png +- BottomPlateInstall.gif +mod_version: 1 +printer_compatibility: +- VT +title: Trident Inverted Electronics diff --git a/printer_mods/LoganFraser/WagoMounts/.metadata.yml b/printer_mods/LoganFraser/WagoMounts/.metadata.yml new file mode 100644 index 000000000..0e564bc3f --- /dev/null +++ b/printer_mods/LoganFraser/WagoMounts/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- CAD/Wago_3x_221-41x_Angled_Din_Rail_Mount.step +- CAD/Wago_221-41x_Extrusion_&_Thin_Din_Mount.step +- CAD/Wago_3x_221-41x_Angled_Din_Rail_Mount.f3d +- CAD/Wago_221-41x_Extrusion_&_Thin_Din_Mount.f3d +description: Wago Mounts for Din Rail or 2020 Extrusion mounting. +images: +- WagoMounts-Extrusion&Din.png +- WagoMounts.png +mod_version: 1 +printer_compatibility: +- V2.4 +- VSW +- VT +title: WagoMounts diff --git a/printer_mods/Long/Mantis_Dual_5015/.metadata.yml b/printer_mods/Long/Mantis_Dual_5015/.metadata.yml new file mode 100644 index 000000000..acc25c0c1 --- /dev/null +++ b/printer_mods/Long/Mantis_Dual_5015/.metadata.yml @@ -0,0 +1,63 @@ +cad: +- CAD/Mantis_MGN12_CrazyVolcano_v1.0.step +- CAD/Mantis_MGN12_Dragon_v1.041_and_v1.043e.step +- CAD/Mantis_MGN12_Rapido_and Rapido_UHF.step +- CAD/Mantis_MGN9_v1.0a.step +description: MGN12 Dual 5015 Toolhead for 2.4 & 1.8 +images: +- images/readme_cfd_crazy_volcano.png +- images/carriage_assembly_mgn9_front.jpg +- images/carriage_assembly_crazy_volcano.jpg +- images/final_assembly_duct_brace.jpg +- images/final_assembly_adxl_front.jpg +- images/readme_mantis.jpg +- images/readme_cfd_dragon.png +- images/1.8_koonweee_thumb.png +- images/final_assembly_rapido.jpg +- images/hotends_rapdio_cad.png +- images/carriage_assembly_solder_magnet.jpg +- images/carriage_assembly_carriage_bottom.jpg +- images/magprobe_bed_mount.jpg +- images/carriage_assembly_mgn9_rear_wiring.jpg +- images/print_orientation_slicer.png +- images/final_assembly_crazy_volcano_rear.jpg +- images/readme_cfd_rapido.png +- images/magprobe_solder_switch.jpg +- images/carriage_assembly_sherpa_brace_mounted_side.jpg +- images/final_assembly_adxl_carriage.jpg +- images/carriage_assembly_hotend_mount_front.jpg +- images/final_assembly_top.jpg +- images/magprobe_gantry_mount_side.jpg +- images/carriage_assembly_hotend_mount_top.jpg +- images/carriage_assembly_rapido.jpg +- images/carriage_assembly_sherpa_brace_hotend_mount.jpg +- images/final_assembly_heater_back.jpg +- images/carriage_assembly_mgn9_front_mounted.jpg +- images/final_assembly_crazy_volcano.jpg +- images/magprobe_gantry_mount_front.jpg +- images/print_orientation_ducts.jpg +- images/carriage_assembly_sherpa_brace_mounted_front.jpg +- images/carriage_assembly_mgn12_front.jpg +- images/readme_exploded.png +- images/magprobe_bed_mount_front.jpg +- images/firmware_slicer_cooling_settings.png +- images/1.8_OscarGM_cut_ears.jpg +- images/carriage_assembly_heatsets.jpg +- images/1.8_koonweee.png +- images/magprobe_bed_mount_rear.jpg +- images/print_orientation_keep_only_bridges.png +- images/magprobe_assembled.jpg +- images/print_orientation_duct_divider.jpg +- images/carriage_assembly_mgn12_rear.jpg +- images/carriage_assembly_mgn9_rear_belts.jpg +- images/magprobe_attached_to_carriage.jpg +- STLs/Duct_Brace/Images/Duct_Brace_Simple.png +- STLs/Duct_Brace/Images/Duct_Brace_Full.png +- STLs/Duct_Brace/Images/Duct_Brace_Back.jpg +- STLs/Duct_Brace/Images/Duct_Brace_Full_Hardware.png +- STLs/Duct_Brace/Images/Duct_Brace_OpenVsClosed.jpg +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: Mantis Dual 5015 Toolhead diff --git a/printer_mods/Lukas/SSD1306_Case_Front_Cover/.metadata.yml b/printer_mods/Lukas/SSD1306_Case_Front_Cover/.metadata.yml new file mode 100644 index 000000000..7b4d42336 --- /dev/null +++ b/printer_mods/Lukas/SSD1306_Case_Front_Cover/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/VoronSSD1306FrontScreen.f3d +- CAD/VoronSSD1306FrontScreen.step +description: SSD1306 Mount replacement for Mini12864 +images: +- images/render.PNG +- images/printed.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: SSD1306 Case Front Cover diff --git a/printer_mods/MCMBen/Voron0_Block_and_Tackle_Z_Belt/.metadata.yml b/printer_mods/MCMBen/Voron0_Block_and_Tackle_Z_Belt/.metadata.yml new file mode 100644 index 000000000..aa73f9c16 --- /dev/null +++ b/printer_mods/MCMBen/Voron0_Block_and_Tackle_Z_Belt/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/Voron0_Block_and_Tackle_Z_Belt.f3d +- CAD/Voron0_Block_and_Tackle_Z_Belt.step +description: A block & tackle belted Z solution using NEMA14. Ratios from 5:1 to 8:1 + and friction prevent Z drop when powered off. +images: +- Images/Block_and_Tackle_Z_Belt_Render.png +- Images/Block_and_Tackle_Z_Belt_Drawing.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: Voron0 Block & Tackle Z Belt diff --git a/printer_mods/MSA/V0-Belt-tension-helper/.metadata.yml b/printer_mods/MSA/V0-Belt-tension-helper/.metadata.yml new file mode 100644 index 000000000..6144eccb4 --- /dev/null +++ b/printer_mods/MSA/V0-Belt-tension-helper/.metadata.yml @@ -0,0 +1,22 @@ +cad: +- CAD/Belttool.f3d +description: Belt tension helper for V0.1 +images: +- Images/Belttool-img1.jpg +- Images/Belttool-img3.jpg +- Images/Tension_tool_drawing.PNG +- Images/Belttool-img2.jpg +- Images/Belttool-img6.jpg +- Images/Belttool-img5.jpg +- Images/Belttool-img4.jpg +- Images/Belttool-img3text2.jpg +- Images/Belttool-img5text.jpg +- Images/Tension_tool_slicing.PNG +- Images/Belttool-img1text.jpg +- Images/Belttool-img1text2.jpg +- Images/Belttool-img3text.jpg +- Images/Belttool-img2text.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Belt tension helper diff --git a/printer_mods/MSiemons/TophatHingeV0.1/.metadata.yml b/printer_mods/MSiemons/TophatHingeV0.1/.metadata.yml new file mode 100644 index 000000000..8c0482a08 --- /dev/null +++ b/printer_mods/MSiemons/TophatHingeV0.1/.metadata.yml @@ -0,0 +1,17 @@ +cad: +- STEPfiles/Hinge_panel_left.step +- STEPfiles/Hinge_panel_right.step +- STEPfiles/Tophat_Part_back_left.step +- STEPfiles/Tophat_Part_back_right.step +description: Simple hinge for V0 Tophat +images: +- Images/TopHathinge_render2.png +- Images/Zoom_open.jpg +- Images/Zoom_closed.jpg +- Images/Tophat_open.jpg +- Images/TopHathinge_render.png +- Images/Tophat_closed.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Tophat Hinge V0 diff --git a/printer_mods/Mac10goesBRRRT/BTT_PiTFT/.metadata.yml b/printer_mods/Mac10goesBRRRT/BTT_PiTFT/.metadata.yml new file mode 100644 index 000000000..dc6aaff0e --- /dev/null +++ b/printer_mods/Mac10goesBRRRT/BTT_PiTFT/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/display_middle_skirt.step +- CAD/PiTFT70_Assembly_with_Housing.step +- CAD/display_mount.step +description: Mount for the BTT PiTFT Touchscreen +images: +- images/PiTFT_Render.png +- images/FFC-Routing.jpg +- images/Display_Front.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: PiTFT Mount diff --git a/printer_mods/Majarspeed/Hartk_Mount_Galileo/.metadata.yml b/printer_mods/Majarspeed/Hartk_Mount_Galileo/.metadata.yml new file mode 100644 index 000000000..edfa51dea --- /dev/null +++ b/printer_mods/Majarspeed/Hartk_Mount_Galileo/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: It hangs stuff on your tool +images: +- hbgm.jpg +- AFB_mount.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Hartk board mount galileo diff --git a/printer_mods/MakeALeft/Switchwire_Front_Grill/.metadata.yml b/printer_mods/MakeALeft/Switchwire_Front_Grill/.metadata.yml new file mode 100644 index 000000000..768b82151 --- /dev/null +++ b/printer_mods/MakeALeft/Switchwire_Front_Grill/.metadata.yml @@ -0,0 +1,8 @@ +cad: +- switchwire_front_grill.step +description: Removed magnet holders on center panel for cleaner look +images: +- Images/CleanGrill.jpg +mod_version: 1 +printer_compatibility: [] +title: Switchwire Clean Center Grill diff --git a/printer_mods/MasturMynd/Stealth_Zero/.metadata.yml b/printer_mods/MasturMynd/Stealth_Zero/.metadata.yml new file mode 100644 index 000000000..168c9b97c --- /dev/null +++ b/printer_mods/MasturMynd/Stealth_Zero/.metadata.yml @@ -0,0 +1,17 @@ +cad: +- CAD/V0.1-Stealth_Zero.step +description: A low poly gantry with front tensioners and optional front mounted x + rail +images: +- Images/V0.1-B_Motor_Inner_Front.png +- Images/V0.1-B_Tensioner_Inner_Rear.png +- Images/V0.1-Complete_Gantry.png +- Images/XY_Joint_Outer_Rear.png +- Images/XY_Joint_Inner_Front.png +- Images/Carriage_Endstops_Left_Rear.png +- Images/V0.1-B_Tensioner_Outer_Front.png +- Images/Carriage_Endstops_Right_Front.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: Stealth Zero diff --git a/printer_mods/MathematicalPotato/v0.1_belted_z_drive/.metadata.yml b/printer_mods/MathematicalPotato/v0.1_belted_z_drive/.metadata.yml new file mode 100644 index 000000000..7491bbe5f --- /dev/null +++ b/printer_mods/MathematicalPotato/v0.1_belted_z_drive/.metadata.yml @@ -0,0 +1,19 @@ +cad: +- CAD/V0.1_belted_z_drive.step +- CAD/v0.1_belted_z_kirigami.step +description: Conversion to a belted Z axis for the V0.1 adapted from theFPVGeek's + mod for the V0.0 +images: +- Images/ZBelt-ISO-03.PNG +- Images/ZBelt-ISO-02.PNG +- Images/ZBelt-ISO-01.PNG +- Images/m3nut_check_1.PNG +- Images/ZBelt-ISO-04.PNG +- Images/m3nut_check_2.PNG +- Images/ZBelt-Support-01.png +- Images/mid_panel.JPG +- Images/belt-tight.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 Belted Z Drive diff --git a/printer_mods/Maverick/MiniSB_LGX_Lite/.metadata.yml b/printer_mods/Maverick/MiniSB_LGX_Lite/.metadata.yml new file mode 100644 index 000000000..f3dddc9ec --- /dev/null +++ b/printer_mods/Maverick/MiniSB_LGX_Lite/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- CAD/MiniSB_LGXL_V2.step +description: A Bondtech LGX Lite variant of the MiniSB +images: +- Images/MiniSB_LGXL_1.png +- Images/MiniSB_LGXL_3.png +- Images/MiniSB_LGXL_2.png +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VSW +- VT +title: MiniSB_LGXL diff --git a/printer_mods/Maverick/MiniSB_Rapido/.metadata.yml b/printer_mods/Maverick/MiniSB_Rapido/.metadata.yml new file mode 100644 index 000000000..3be050eed --- /dev/null +++ b/printer_mods/Maverick/MiniSB_Rapido/.metadata.yml @@ -0,0 +1,11 @@ +cad: [] +description: Modified MiniSB to use a Rapido hotend +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VSW +- VT +title: MiniSB_Rapido diff --git a/printer_mods/Maverick/MiniSB_Sharkfin/.metadata.yml b/printer_mods/Maverick/MiniSB_Sharkfin/.metadata.yml new file mode 100644 index 000000000..41b0cdb3a --- /dev/null +++ b/printer_mods/Maverick/MiniSB_Sharkfin/.metadata.yml @@ -0,0 +1,13 @@ +cad: [] +description: Modified MiniSB to use a Sharkfin Extruder +images: +- Images/Sharkfin2.png +- Images/Sharkfin1.png +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VSW +- VT +title: MiniSB_Sharkfin diff --git a/printer_mods/Maverick/V0.2_Handles/.metadata.yml b/printer_mods/Maverick/V0.2_Handles/.metadata.yml new file mode 100644 index 000000000..abab38c93 --- /dev/null +++ b/printer_mods/Maverick/V0.2_Handles/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/V0.2_Handle.step +description: Add handles to the extrusion tophat +images: +- Images/Handle_2.png +- Images/Handle_3.png +- Images/Handle_1.jpeg +- Images/2.png +- Images/3.png +- Images/1.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.2 Handles diff --git a/printer_mods/Maverick/V0.2_Stealth_Skirts/.metadata.yml b/printer_mods/Maverick/V0.2_Stealth_Skirts/.metadata.yml new file mode 100644 index 000000000..e00e8ad64 --- /dev/null +++ b/printer_mods/Maverick/V0.2_Stealth_Skirts/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/V0.2_Stealth_Skirts.step +- CAD/V0.2_Stealth_Skirts.f3d +description: Juiced up skirts for the V0.2 +images: +- Images/skirts_2.png +- Images/skirts_3.png +- Images/skirts_1.png +- Images/skirts_4.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.2 Stealth Skirts diff --git a/printer_mods/Mckurt/Switchwire_Y_Belt_Tensioner/.metadata.yml b/printer_mods/Mckurt/Switchwire_Y_Belt_Tensioner/.metadata.yml new file mode 100644 index 000000000..b35088aa8 --- /dev/null +++ b/printer_mods/Mckurt/Switchwire_Y_Belt_Tensioner/.metadata.yml @@ -0,0 +1,16 @@ +cad: [] +description: Switchwie Y axis Belt Tensioner +images: +- Images/mod.png +- Images/4.jpg +- Images/asembly.png +- Images/5.jpg +- Images/7.jpg +- Images/6.jpg +- Images/2.jpg +- Images/3.jpg +- Images/1.jpg +mod_version: 1 +printer_compatibility: +- VSW +title: Switchwire Y Belt Tensioner diff --git a/printer_mods/Mellow/V0_Fly-Gemini/.metadata.yml b/printer_mods/Mellow/V0_Fly-Gemini/.metadata.yml new file mode 100644 index 000000000..11e9c3209 --- /dev/null +++ b/printer_mods/Mellow/V0_Fly-Gemini/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: Fly-Gemini adapted model for V0 +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Fly-Gemini diff --git a/printer_mods/MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail/.metadata.yml b/printer_mods/MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail/.metadata.yml new file mode 100644 index 000000000..9b43bbcb7 --- /dev/null +++ b/printer_mods/MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail/.metadata.yml @@ -0,0 +1,15 @@ +cad: [] +description: V0.1 mod for mounting Bondtech LGX extruder with addition of 2nd X rail + on the back of the 1515 extrusion. +images: +- LGX_0_1.png +- LGX_0_2.png +- LGX_3.png +- LGX_2.png +- LGX_0.png +- LGX_1.png +- LGX_4.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: LGX mount for V0.1 with 2nd X rail diff --git a/printer_mods/Minsekt/Rear_Umbilical/.metadata.yml b/printer_mods/Minsekt/Rear_Umbilical/.metadata.yml new file mode 100644 index 000000000..f27c83460 --- /dev/null +++ b/printer_mods/Minsekt/Rear_Umbilical/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- CAD/Rear_Umbilical.step +description: Rear Umbilical mounting solution including a relocated Y-Endstop +images: +- images/rear_umbilical.png +- Y_Endstop_Relocation/images/endstop.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Rear Umbilical diff --git a/printer_mods/MrBean66/SKR_PRO_Mount/.metadata.yml b/printer_mods/MrBean66/SKR_PRO_Mount/.metadata.yml new file mode 100644 index 000000000..f00cfca44 --- /dev/null +++ b/printer_mods/MrBean66/SKR_PRO_Mount/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: Simple mod to mount the SKR Pro board from BTT to a DIN rails. +images: +- SKR_PRO_Example.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: SKR Pro DIN Mount diff --git a/printer_mods/MrDespair/MiniAB_Pinda/.metadata.yml b/printer_mods/MrDespair/MiniAB_Pinda/.metadata.yml new file mode 100644 index 000000000..8d4bf7f9d --- /dev/null +++ b/printer_mods/MrDespair/MiniAB_Pinda/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- CAD/Cowling_Dragon_v3.step +description: Replacement MiniAB Cowling to add a mount for a Pinda style probe. +images: +- Images/ProbeInAction.jpg +- Images/CAD1.png +- Images/cad3.png +- Images/cad2.png +- CAD/CAD1.png +- CAD/cad3.png +- CAD/cad2.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: MiniAB Pinda Probe Mount diff --git a/printer_mods/Mrgl-Mrgl/LGX_Lite_Mount/.metadata.yml b/printer_mods/Mrgl-Mrgl/LGX_Lite_Mount/.metadata.yml new file mode 100644 index 000000000..d3a03cb03 --- /dev/null +++ b/printer_mods/Mrgl-Mrgl/LGX_Lite_Mount/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: a mount for the LGX Lite +images: +- Lgx_Lite_Mounting.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: LGX Lite Mount diff --git a/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/.metadata.yml b/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/.metadata.yml new file mode 100644 index 000000000..f15db0d15 --- /dev/null +++ b/printer_mods/Nashuar/V0_Dragon_ToolheadStockScrews/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: This toolhead uses the stock M2.5 screw that came with the dragon hotend +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Dragon Toolhead M2.5x8 diff --git a/printer_mods/Nomsplease/60mm_Shaft_Jig/.metadata.yml b/printer_mods/Nomsplease/60mm_Shaft_Jig/.metadata.yml new file mode 100644 index 000000000..ecbcf104b --- /dev/null +++ b/printer_mods/Nomsplease/60mm_Shaft_Jig/.metadata.yml @@ -0,0 +1,8 @@ +cad: +- 60mm_Shaft_Jig_v2.step +description: Simple jig for cutting and grinding 60mm Z shafts +images: [] +mod_version: 1 +printer_compatibility: +- V2.4 +title: 60mm Shaft Jig diff --git a/printer_mods/Nomsplease/V0_Mods/duet_wifi_mount/.metadata.yml b/printer_mods/Nomsplease/V0_Mods/duet_wifi_mount/.metadata.yml new file mode 100644 index 000000000..3697e957f --- /dev/null +++ b/printer_mods/Nomsplease/V0_Mods/duet_wifi_mount/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- duet_wifi_mount.step +description: Duet wifi mount in pocketwatch location +images: +- Images/back_compartment.jpg +- Images/closed_back.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Duet Wifi Mount diff --git a/printer_mods/Nomsplease/V0_Mods/led_mounts/.metadata.yml b/printer_mods/Nomsplease/V0_Mods/led_mounts/.metadata.yml new file mode 100644 index 000000000..b541e677f --- /dev/null +++ b/printer_mods/Nomsplease/V0_Mods/led_mounts/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- 12mm_strip_mini_mount.step +- 10mm_strip_mount_full_with_channel.step +- 10mm_strip_mount_full.step +description: Basic LED mounts for 10 and 12mm strips +images: +- Images/lighting.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: LED Mounts diff --git a/printer_mods/Nomsplease/V0_Mods/panel_mounts/.metadata.yml b/printer_mods/Nomsplease/V0_Mods/panel_mounts/.metadata.yml new file mode 100644 index 000000000..a1e942f44 --- /dev/null +++ b/printer_mods/Nomsplease/V0_Mods/panel_mounts/.metadata.yml @@ -0,0 +1,9 @@ +cad: +- rear_bottom_left_bracket_with_stop.step +- rear_bottom_right_bracket_with_stop.step +description: Remixed rear bottom panel mounts with stop +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: Remixed Panel Mounts diff --git a/printer_mods/Nomsplease/V0_Mods/pi_zero_camera_mount/.metadata.yml b/printer_mods/Nomsplease/V0_Mods/pi_zero_camera_mount/.metadata.yml new file mode 100644 index 000000000..389089cd1 --- /dev/null +++ b/printer_mods/Nomsplease/V0_Mods/pi_zero_camera_mount/.metadata.yml @@ -0,0 +1,9 @@ +cad: +- pi_zero_mount.step +- camera_mount.step +description: Mount for pi camera and ZeroW +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: Pi Cam/ZeroW Mount diff --git a/printer_mods/Nomsplease/V0_Mods/pocket_watch_rear_relocation/.metadata.yml b/printer_mods/Nomsplease/V0_Mods/pocket_watch_rear_relocation/.metadata.yml new file mode 100644 index 000000000..25ff2a7fa --- /dev/null +++ b/printer_mods/Nomsplease/V0_Mods/pocket_watch_rear_relocation/.metadata.yml @@ -0,0 +1,8 @@ +cad: +- pocket_watch_rear_mount.step +description: Pocket watch rear reolcation bracket +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: Pocket Watch Rear Reolcation Bracket diff --git a/printer_mods/Oakman/BTT_24V_UPS_Metal_DIN_Mount/.metadata.yml b/printer_mods/Oakman/BTT_24V_UPS_Metal_DIN_Mount/.metadata.yml new file mode 100644 index 000000000..94a2d9cb4 --- /dev/null +++ b/printer_mods/Oakman/BTT_24V_UPS_Metal_DIN_Mount/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: Adapter to use a metal DIN mount for the BTT 24V UPS +images: +- BTT_UPS_24V_DIN.jpeg +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: BTT 24V UPS Metal DIN Mount diff --git a/printer_mods/Oakman/FYSETC_Spider_Metal_DIN_Mount/.metadata.yml b/printer_mods/Oakman/FYSETC_Spider_Metal_DIN_Mount/.metadata.yml new file mode 100644 index 000000000..b9b32e2f5 --- /dev/null +++ b/printer_mods/Oakman/FYSETC_Spider_Metal_DIN_Mount/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Use a metal DIN mount for your FYSETC Spider +images: +- YASDM_metal_din.jpg +- Angry_Starfish_Spider_metal_din.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: FYSETC Spider Metal DIN Mount diff --git a/printer_mods/Oakman/RPI_Metal_DIN_Mount/.metadata.yml b/printer_mods/Oakman/RPI_Metal_DIN_Mount/.metadata.yml new file mode 100644 index 000000000..c6b0803d7 --- /dev/null +++ b/printer_mods/Oakman/RPI_Metal_DIN_Mount/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Adapter for metal DIN mounting the Raspberry Pi +images: [] +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: RPI Metal DIN Mount diff --git a/printer_mods/OboMaker3D/C17-EXT-CARTRIDGE/.metadata.yml b/printer_mods/OboMaker3D/C17-EXT-CARTRIDGE/.metadata.yml new file mode 100644 index 000000000..01c54675b --- /dev/null +++ b/printer_mods/OboMaker3D/C17-EXT-CARTRIDGE/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/C17-EXT-CARTRIDGE.step +description: Alternative to a commercial cartridge for the C17-EXT filter +images: +- JPG/IMG_1.png +- JPG/IMG_2.png +- JPG/IMG_3.png +mod_version: 1 +printer_compatibility: +- V2.4 +- VSW +- VT +title: C17-EXT-CARTRIDGE for C17-EXT filter diff --git a/printer_mods/OboMaker3D/C17-EXT/.metadata.yml b/printer_mods/OboMaker3D/C17-EXT/.metadata.yml new file mode 100644 index 000000000..37057d7b9 --- /dev/null +++ b/printer_mods/OboMaker3D/C17-EXT/.metadata.yml @@ -0,0 +1,17 @@ +cad: +- CAD/C17-EXT.step +description: Replaces standard filter with new HEPA Crabon and 120mm fan V1.1 +images: +- JPG/IMG_1.png +- JPG/IMG_2.png +- JPG/IMG_3.png +- JPG/IMG_7.png +- JPG/IMG_6.png +- JPG/IMG_4.png +- JPG/IMG_5.png +mod_version: 1 +printer_compatibility: +- V2.4 +- VSW +- VT +title: C17-EXT Filter HEPA Carbon diff --git a/printer_mods/Phalanx/Other-V2-Idlers/.metadata.yml b/printer_mods/Phalanx/Other-V2-Idlers/.metadata.yml new file mode 100644 index 000000000..67677b865 --- /dev/null +++ b/printer_mods/Phalanx/Other-V2-Idlers/.metadata.yml @@ -0,0 +1,16 @@ +cad: +- CAD/Other_Idler_V2.f3d +- CAD/Other_Idler_V2.step +description: Allow usage of wider toolheads on the V2 +images: +- Images/filekey.JPG +- Images/heatset.jpg +- Images/printset.JPG +- Images/comparison.jpg +- Images/Installed2.jpg +- Images/Installed.jpg +- Images/front.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: '"Other" Idlers Mod' diff --git a/printer_mods/Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch/.metadata.yml b/printer_mods/Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch/.metadata.yml new file mode 100644 index 000000000..b7dafa4ed --- /dev/null +++ b/printer_mods/Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- STEP/Its_Not_a_Sexbolt_z_Switch_v4.step +description: Sexbolt style switch for V0 +images: +- images/NotaSexboltimage.png +- images/Dingushippo_magent1.jpg +- images/Dingushippo_magent2.jpg +- images/Dingushippo_plate.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 Z nozzle endstop switch diff --git a/printer_mods/Polar-Ted/V0_Two_Piece_Back_Panel/.metadata.yml b/printer_mods/Polar-Ted/V0_Two_Piece_Back_Panel/.metadata.yml new file mode 100644 index 000000000..7e1b2e4a7 --- /dev/null +++ b/printer_mods/Polar-Ted/V0_Two_Piece_Back_Panel/.metadata.yml @@ -0,0 +1,9 @@ +cad: +- STEP/V0_1_Back_Panel_v7.step +description: Vented 2 piece back panel for V0 +images: +- Images/PXL_20220621_145343681.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 Two Piece Back Panel diff --git a/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/.metadata.yml b/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/.metadata.yml new file mode 100644 index 000000000..3d7c71e64 --- /dev/null +++ b/printer_mods/Polared/Power_Inlet_w_Keystone_Insert/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Voron 0.1 Power inlet with keystone insert slot +images: +- images/installed.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Power Inlet with Keystone Insert diff --git a/printer_mods/Printopal/Magnetic_top_panel/.metadata.yml b/printer_mods/Printopal/Magnetic_top_panel/.metadata.yml new file mode 100644 index 000000000..a103cd734 --- /dev/null +++ b/printer_mods/Printopal/Magnetic_top_panel/.metadata.yml @@ -0,0 +1,11 @@ +cad: [] +description: Top panel with magnets allows for quick installation and removal +images: +- Images/Magnet.jpg +- Images/Magnetic_top_panel.jpg +- Images/Split.jpg +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: Magnetic top panel diff --git a/printer_mods/PsychoShaft/C92X_PsycHoShafts_Mount/.metadata.yml b/printer_mods/PsychoShaft/C92X_PsycHoShafts_Mount/.metadata.yml new file mode 100644 index 000000000..bac2061e6 --- /dev/null +++ b/printer_mods/PsychoShaft/C92X_PsycHoShafts_Mount/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- CAD/Voron_C92X_Camera_Complete.step +- CAD/Voron_C92X_Camera_Complete.f3d +description: 2020 Top profile 920 camera mount / 2 point axis pivot +images: +- Images/Camera_fit_on_profile.jpg +- Images/Camera_front_view.jpg +- Images/Camera_complete.jpg +- Images/Camera_hinge_design.jpg +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: C92X_PsycHoShafts_Mount diff --git a/printer_mods/QuackProfit/V0-Adafruit-Y_Rails/.metadata.yml b/printer_mods/QuackProfit/V0-Adafruit-Y_Rails/.metadata.yml new file mode 100644 index 000000000..ffbe68a81 --- /dev/null +++ b/printer_mods/QuackProfit/V0-Adafruit-Y_Rails/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions +images: +- images/design.jpg +- images/installed.jpg +- images/wired.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Adafruit NeoPixel LED Mounts diff --git a/printer_mods/README.md b/printer_mods/README.md index 43521cf1f..515b2e83a 100644 --- a/printer_mods/README.md +++ b/printer_mods/README.md @@ -1,435 +1,422 @@ # Mods Printer mods for Voron 3D printers -Remember to update this README when uploading new mod! ## Legacy printers Mods for legacy printers can be found [here](../legacy_printers/printer_mods). -If one of your mods applies to a current generation Voron printer, contact the admins in -Discord to have your mod moved to this folder. - -## Table structure - -Update the following table with the information about your mod: -- Your name -- A link to your sub-folder -- A short description of your mod -- The printer compatibility. Use `:heavy_check_mark:` for :heavy_check_mark:,`:x:` for :x: and `:grey_question:` for :grey_question: - -like so: -` -| Creator | [Mod title](link) | Description | :x: | :x: | :x: | :x: | :x: |` +If one of your legacy mods applies to a current Voron 3D printer and therefore should be included in this list, +contact the admins on Discord to have your mod moved to this folder. --- -| Creator | Mod title | Description | V0 | V1.8 | V2.4 | VSW | Trident | -| --- | --- | --- | --- | --- | --- | --- | --- | -|1-0-R|[V2.4 handle](./1-0-R/handle)| Handle for Voron 2.4| :x: | :grey_question: | :heavy_check_mark: | :x: | :grey_question: | -|120decibell|[Side entry exhaust housing](./120decibell/exhaust_housing_side_entry)| Exhaust housing with dual cover screws and single or dual side entry filament paths. |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|:heavy_check_mark:| -||[Huvud Chain Mount](./120decibell/huvud_chain_mount)| Huvud rear mount for Clockwork or LGX that supports a cable chain. |:x:|:heavy_check_mark:|:grey_question:|:x:|:heavy_check_mark:| -|3dpandme|[FANnypack zero](./3dpandme/Fannypack_zero)|Electronics cooling solution for Voron Zero|:heavy_check_mark:| :x: | :x: | :heavy_check_mark: | :heavy_check_mark:| -| |[Thermistor holder zero](./3dpandme/Thermistor_holder_zero)|Extended thermistor holder for Voron Zero|:heavy_check_mark:| :x: | :x: | :heavy_check_mark: | :heavy_check_mark:| -|3vilson|[V0.1_Skirt_Inlet](./3vilson/V0.1_Skirt_Inlet)|Skirt with C14 inlet + New feet to screw into|:heavy_check_mark:| :x: | :x: | :x: | :x:| -| |[V0.1_Skirt_Holes](./3vilson/V0.1_Skirt_Holes)|Skirt with Access Holes from the bottom|:heavy_check_mark:| :x: | :x: | :x: | :x:| -|42bios|[Corner panel clip w. cable](./42bios/corner_panel_clip_cable)| Corner panel clip with an internal cable path. |:x:|:grey_question:|:heavy_check_mark:|:x:| -| |[Exhaust filter housing - side thread](./42bios/exhaust_filter_housing_side)|Exhaust filter housing with the G1-8 "thread on the side. |:x:|:grey_question:|:heavy_check_mark:|:x:| -| |[LED mount](./42bios/LED_mount)|AngryLED - LED-mount for Lumentech LT3 profiles. |:x:|:grey_question:|:heavy_check_mark:|:x:| -| |[relay mount](./42bios/relay_mount)|relay-mount for 2x 2 channel relay modules.|:x:|:grey_question:|:heavy_check_mark:|:x:| -|ademuri|[Lights, Camera, Voron](./ademuri/Lights_Camera_Voron)|A mount for LED strips and Picam for the V0.1|:heavy_check_mark:|:x:|:x:|:x:|:x:| -|aeresov|[TL filament sensor bracket](./aeresov/TL_filament_sensor_bracket)|A bracket for TL filament sensor to mount near stock spool holder. |:x:|:grey_question:|:heavy_check_mark:|:x:| -||[MeanWell UHP-xxx DIN mount](./aeresov/MeanWell_UHP_DIN_mount)|A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount it across 2 DIN rails.|:x:|:grey_question:|:heavy_check_mark:| -||[Raspberry Pi DIN mount](./aeresov/Raspberry_Pi_DIN_mount)|A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or across.|:x:|:grey_question:|:heavy_check_mark:| -||[SKR 1.3/1.4 DIN mount](./aeresov/SKR_DIN_mount)|A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or across.|:x:|:grey_question:|:heavy_check_mark:| -||[cable tie DIN mount](./aeresov/cable_tie_DIN_mount)|A bracket for cable ties to route cables across DIN rails.|:x:|:grey_question:|:heavy_check_mark:| -|Akio| [Hidden cable routing z belt cover](./Akio/cable_routing_z_belt_cover) | Z belt covers that allow hidden cable routing. | :x: | :x: | :heavy_check_mark: | :x: | :x: | -|alanho|[BTT PITFT50 v2 Mount](./alanho/BTT_PITFT50_v2_Mount)|A mount for the BTT PITFT50 v2 Touch Display |:x:|:grey_question:|:heavy_check_mark:|:x:| -|albert|[IKEA Dioder Led Mount](./albert/IKEA_Dioder_Led_Mount)|A mount for the IKEA Dioder LED strip | :grey_question: | :grey_question: | :heavy_check_mark: |:x:| -|al3ph|[LED Mount](./al3ph/led_mount)|A mount for 10mm LED WS2812 strips |:heavy_check_mark:|:x:|:x:|:x:| -| |[Analog Timer Mount](./al3ph/analog_timer_mount)|A skirt mount for analog timer |:heavy_check_mark:|:x:|:x:|:x:| -| |[Filament Runout Sensor](./al3ph/filament_runout)|A simple filament runout sensor |:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| -| |[PL05 Sensor Mount](./al3ph/pl05_mount)|A mount PL05 inductive sensor |:heavy_check_mark:|:x:|:x:|:x:| -|AlexanderT-Moss|[270 Clamping Hinges](./AlexanderT-Moss/270-Clamping-Hinges)|Simple 270 degree hinges that clamp to the front panels instead of using VHB or drilled holes|:x:|:grey_question:|:heavy_check_mark:|:x:|:grey_question:| -|Andre|[Mini Afterburner Strain Relief](./Andre/Mini_Afterburner_Strain_Relief)|A replacement strain relief for the Mini Afterburner toolhead|:heavy_check_mark:|:x:|:x:|:x:| -| |[V0 Neopixel Front Bed Mount](./Andre/V0_Neopixel_Front_Bed_Mount)|A replacement Front Bed Mount with room for a neopixel or dotstar behind the logo|:heavy_check_mark:|:x:|:x:|:x:| -| |[Mini Afterburner ADXL345 Mount](./Andre/Mini_Afterburner_ADXL345_Mount)|Mount for an AXDL345 on the Mini Afterburner|:heavy_check_mark:|:x:|:x:|:x:| -| |[Revo Nozzle Skirt](./Andre/Revo_Nozzle_Skirt_Trident)|A Revo nozzle box hidden in a Trident skirt.|:x:|:x:|:x:|:x:|:x:|:heavy_check_mark:| -|antoinecellerier|[DS18B20 Sensor Mount](./antoinecellerier/ds18b20-sensor-mount)|DS18B20 temperature sensor mount|:heavy_check_mark:|:x:|:x:|:x:|:x:| -| ardichoke | [V0 Long Thumb Nut](./ardichoke/v0-long-thumb-nut) | Taller thumb nuts for V0 bed | :heavy_check_mark: | :x: | :x: | :x: | :x: | -|arkeet|[Dial test indicator mount](./arkeet/dti-mount)|A toolhead mount for a dial test indicator, where the tip is located at the nozzle. |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:| -| |[Magnetic hotend fan cover](./arkeet/magnet-fan-cover)|A replacement hotend fan cover, held with magnets instead of screws. |:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| -| |[MGN12 X-axis](./arkeet/mgn12/)|Replaces the dual MGN9H rails with a single MGN12H. |:x:|:x:|:heavy_check_mark:|:x:| -| |[V0 DC inlet](./arkeet/v0-dc-inlet/)|Skirt inlet for external 24V DC power supply. |:heavy_check_mark:|:x:|:x:|:x:| -|aTinyShellScript |[RS PSU DIN Bracket](./aTinyShellScript/RS_PSU_DIN_Brackets)|DIN brackets for MeanWell RS PSUs with 80mm spacing. |:grey_question:|:grey_question:|:heavy_check_mark:|:grey_question:|:grey_question:| -|baccula |[Revo Nozzle Holder for v2.4 350](./baccula/revo_skirt_nozzle_holder/)|A remix of Andre's design allowing for skirt storage of 4 E3D Revo nozzles in the skirt of your 350mm v2.4. |:x:|:x:|:heavy_check_mark:|:x:|:x: -|Backenfutter|[Mount for Electreeks Camera](./Backenfutter/Mount_for_Electreeks_Camera)|This Mod is a simple "One Piece" mount for the popular Electreeks Camera. |:grey_question:|:grey_question:|:heavy_check_mark:|:x:|:grey_question:| -|Badnoob |[Precision AB Drive](./Badnoob/Precision_AB_Drive)|Changes the gearing for the AB drives to improve both resolution and torque, with a strenthened frame. |:grey_question:|:grey_question:|:heavy_check_mark:|:x:| -| |[AB-BN Afterburner mod (5015)](./Badnoob/AB-BN)|Improved Afterburner with 5015 fan |:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| -| |[AB-BN for Stock Afterburner (4020)](./Badnoob/ABBN_for_Stock)|Improved Dragon and Rapido toolhead for stock Afterburner with 4020 fan |:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| -| |[Rail Alignment](./Badnoob/Rail_Alignment)|Tools and procedure to properly align the rails in 2.4 and Afterburner|:x:|:x:|:heavy_check_mark:|:x:| -|Baltojikale | [LoudOwl aka Stabby](./Baltojikale/LoudOwl_aka_Stabby) | Alternative dual 5015 part cooling fan toolhead for Afterburner | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -|beaugalbraith| [Nova Printhead](./beaugalbraith/Nova_Printhead) | Use Nova Hotend with Afterburner | :grey_question: | :grey_question: | :heavy_check_mark: | :grey_question: | :grey_question:| -| BladeScraper-Designs | [Microswitch Pod With Connector](./BladeScraper-Designs/Microswitch_Pod_With_Conector) | Microswitch pod with JST-XH 4-pin connector | :x: |:x: |:heavy_check_mark: | :x: -| | [Horizontal Spool Holder](./BladeScraper-Designs/Horizontal-Spool-Holder) | Based on the stock holder but mounts to the horizontal extrusions. | :x: | :grey_question: |:heavy_check_mark: | :grey_question: -| | [CornerPanel_SpoolHolder](./BladeScraper-Designs/CornerPanel_SpoolHolder) | A better supported Spool Holder that mounts to a modified corner panel. | :heavy_check_mark: | :x: |:x: | :x: | :x: | -|Blamm|[LRS-100 DIN mount](./Blamm/lrs-100)|DIN rail mount for an extra LRS-100 Power Supply | :x: | :heavy_check_mark: | :heavy_check_mark: |:grey_question:| :heavy_check_mark:| -|BlueBear|[Deck Panel Backpack](./BlueBear/Deck_Panel_Backpack)|A mounting alternative if you don't want to drill your deck panel | :heavy_check_mark: | :x: | :x: |:x:| -||[Clippable Wago 221 Mounts](./BlueBear/Wago_221_mount)|Mounts for Wago 221 to screw or clip-in on 1515 extrusions | :heavy_check_mark: | :x: | :x: | -||[Ziptie Mount](./BlueBear/Ziptie_Mount)|Clippable Ziptie hooks for 1515 extrusions| :heavy_check_mark: | :x: | :x: | -| bobbleheed | [Magnetic Panels](./bobbleheed/Magnetic_Panels) | Magnetic clips to allow for easy removal and installation of panels | :x: | :grey_question: | :heavy_check_mark: | :x: | :grey_question: | -| | [Filament Runout Sensor](./bobbleheed/Filament_Runout) | Filament runout sensor that replaces the stock bowden retainer | :x: | :heavy_check_mark: |:heavy_check_mark: | :x: | :heavy_check_mark: | -|Boingomw|[Wago mount](./Boingomw/Wago_mount)| Smaller 5 port Wago mount that fits parallel to the support rails |:x:|:grey_question:|:heavy_check_mark:|:x:|:grey_question:| -|Bondtech|[Mini-After-LGX-Lite](./Bondtech/Mini-After-LGX-Lite) |LGX Lite Toolhead Setup For Voron V0.1. | :heavy_check_mark: | :x: | :x: |:x:|:x:| -| btp | [Galileo chain mount (befenybay)](./btp/Galileo_Switchwire_Chain_Mount) | Modified chain mount position to cater for difference with Galileo Clockwork |:x:|:x:|:x:|:heavy_check_mark:| -| buzzdalf | [v1.8/2.4 Afterburner connector cover for 42STH20-1004AS](./buzzdalf/connector_cover) | v1.8/2.4 Connector cover for 42STH20-1004AS | :x: | :heavy_check_mark: | :heavy_check_mark: |:grey_question:| -||[Ender 3 Switchwire Taller Z Mod](./buzzdalf/ender_switchwire_taller_z) | Taller Z Mod | :x: | :x: | :x: | :heavy_check_mark: | -||[Ender 3 Switchwire Y Tensioner Mod](./buzzdalf/ytension) | Y Tension Mod | :x: | :x: | :x: | :heavy_check_mark: | - ByteChild | [ESP32 DIN Rail Bracket](./ByteChild/ESP32_DIN_Rail_Bracket) | DIN rail mounting bracket for an ESP32 | :x: | :grey_question: | :heavy_check_mark: | :x: | - || [2-Channel Relay DIN Rail Bracket](./ByteChild/2_Channel_Relay_DIN_Rail_Bracket) | DIN Rail mounting bracket for an 2-Channel-Relay | :x: | :grey_question: | :heavy_check_mark: | :x: | -|bythorsthunder|[MGN9 Backers Idlers](./bythorsthunder/MGN9_Backers)|New idler uppers for MGN9 Extrusion backers |:x:|:x:|:heavy_check_mark:|:x:|:x:| -||[Stealthburner Rapido UHF](./bythorsthunder/Stealthburner_Rapido_Uhf)|Stealthburner mod for Rapido UHF |:x:|:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| -|CannedBass|[Trident Bed Fans](./CannedBass/Trident_Bed_Fans)| Bed fans for Trident |:x:|:grey_question:|:x:|:x:|:heavy_check_mark:| -||[PITFT50 45-degree mount](./CannedBass/PITFT50_45_degree_mount)| Mount that puts the screen at a 45-degree angle for more vertical clearance |:x:|:grey_question:|:heavy_check_mark:|:x:|:heavy_check_mark:| -| Ch4rlesB | [V0 Handles Slim](./Ch4rlesB/V0_Handles_Slim) | Simple and slim handles for the V0 | :heavy_check_mark: | :x: | :x: | :x: | -| Chaoticlab | [Tool_free_tensioner](./Chaoticlab/Tool_free_tensioner) | Tool-free tensioner for Z-Axis | :x: | :x: | :heavy_check_mark: | :x: | -| ChenTheDesignMaker | [Z Belt Clip](./ChenTheDesignMaker/Z_Belt_Clip) | Simple clip to keep extra Z belts clean and away from panels | :x: | :x: | :heavy_check_mark: | :x: | :x:| -| chirpy | [V0.1 Raised Tophat](./chirpy/TipTophat) | Alternative Tophat design that uses stock panels and raises height by 30mm| :heavy_check_mark: | :x: | :x: | :x: | :x: | -| | [V0.1 Nozzle Wiper](./chirpy/NozzleWiper) | Servo powered nozzle wiper and purge bucket | :heavy_check_mark: | :x: | :x: | :x: | :x: | -| | [Runout UnKlicky Sensor](./chirpy/RunoutUnklicky) | Runout UnKlicky Sensor is a filament runout sensor with mounts for 1515 and 2020 extrusions| :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| chrisrgonzales | [270° Front Panel Hinge](./chrisrgonzales/270_degree_hinge) | Hinges that have 270° of swivel, parametric CAD included | :x: | :x: | :heavy_check_mark: | :x: | -| christophmueller | [Phaetus and Zodiac Dragonfly BMO Afterburner toolheads](./christophmueller/Phaetus_Dragonfly_BMO_Afterburner) | Covers both the original Phaetus variant as well as the Zodiac one. | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| chri.kai.in | [20x20mm Profile Covers](./chri.kai.in/20x20mm_Profile_Covers) | Provide overlapping and flush slot covers for 20x20mm slot6 construction profiles| :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| | [Angry CAM USB](./chri.kai.in/Angry_CAM_USB) | Housing for small USB camera module, allowing mounting to gantry or frame profiles | :x: | :grey_question: | :heavy_check_mark: | :grey_question: | :grey_question: | -| | [Exhaust Adapter 100mm](./chri.kai.in/Exhaust_Adapter_100mm) | Replace 60mm exhaust fan with 100mm ventilation system adapter | :x: | :heavy_check_mark: | :heavy_check_mark: | :x: | :heavy_check_mark: | -|claytono|[Fysetc S6 V2 Mount](./claytono/fysetc-s6-v2-mount)| DIN Mount for the Fysetc S6 V2 controller |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:| -||[Voron 2.4 Extrusion Jig](./claytono/2.4-extrusion-jig)|A jig help align extrusions to get a properly square frame |:x:|:x:|:heavy_check_mark:|:x:| -||[V0 Zip Tie Skirts](./claytono/v0-zip-tie-skirts)|V0 skirts with small loops added along the top to allow zip tyiing cables to them|:heavy_check_mark:|:x:|:x:|:x: -| clee | [Monster8 DIN Rail Mounts](./clee/Monster8_heatsert_mount) | DIN mount for Makerbase Monster8 V1/V2 controller | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark:| -| cmrny | [V0.1 Motor Panel Modification](./cmrny/v01_motor_panel_no_rub) | V0.1 Motor panel modification to keep umbilical and bowden tube from rubbing against motor belts | :heavy_check_mark: | :x: | :x: | :x: | :x:| -| Conqueror433 | [Voron Parts Logo](./conqueror433/Voron_Parts_Logo) | Voron Parts Logo for your back panels, 3D Print or Laser Cut | :x: | :x: | :heavy_check_mark: | :x: | -||[Voron V0.1 Parts Logo](./conqueror433/Voron_V0.1_Parts_Logo)|Voron Parts Logo for your V0 deck panel |:heavy_check_mark:|:x:|:x:|:x:| -|consibonsi | [Y-Mod SW 9mm](./consibonsi/Y-Mod_SW_9mm)| 9mm Y belt mod for SW | :x: |:x: |:x: |:heavy_check_mark:| -|csch0 | [SW Fan Mount No Tape](./csch0/SW_FanMount_No_Tape)| 60x20 Fan Mount for SW without tape| :x: |:x: |:x: |:heavy_check_mark:| -| d3nny | [Filtered Power Plug with RND_165-00057](./d3nny/mains_plug_panel_for_RND_165-00057) | Filtered Power Plug for RND 165-00057 and CAT6-Plug | :x: | :x: | :heavy_check_mark: |:x:| -|D4rkCelerity| [Raspberry Pi Zero Bracket](./D4rkCelerity/Raspberry_Pi_Zero_Bracket/) | Modified version of Trident RPi bracket to fit the smaller RPi Zero | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :x: | :heavy_check_mark: | -|DaGlo| [V0.1 Duet 2 Wifi mounting brackets](./DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets/) | Voron 0.1 Mounting brackets with/without RPi 4 | :heavy_check_mark: | :x: | :x: | :x: | -|| [Voron V0 Mean Well power supply bracket (Funssor Kit)](./DaGlo/Voron_V0_MW_PS_Bracket/) | Voron V0 Mean Well power supply bracket (Funssor Kit) | :heavy_check_mark: | :x: | :x: | :x: | -|| [Voron V0 SSR Mount](./DaGlo/Voron_V0_SSR_Mount/) | Voron V0 SSR Mount for the bottom | :heavy_check_mark: | :x: | :x: | :x: | -|DaGrooch13 |[Tophat Exhaust Filter V0](./DaGrooch13/Tophat_Exhaust_Filter) |Activated charcoal exhaust filter with HEPA that replaces the rear tophat panel |:heavy_check_mark: |:x: |:x: |:x:| -|Dan88 |[V0 one-part Skirts](./Dan88/V0skirt) |One part Skirts for the V0 |:heavy_check_mark: |:x: |:x: |:x:| -|DaStivi |[The Cephalopod limb (BTT Octopus PRO Bracket(s))](./DaStivi/the_Cephalopods_limb) |An alternative Din rail mount for BTT Octopus (PRO) boards |:grey_question: |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark:| -|Daten |[Revo hotend skirt case](./Daten/Voron_2.4_Revo_Nozzle_Holder)|A skirt case for the Revo hotends to reside R1 and R2|:x:|:x:|:heavy_check_mark:|:x:|:x:| -|davidauvergne| [Center_cable_management_duct](./davidauvergne/Center_cable_management_duct) | Mod for a centered cable management | :x: | :x: | :✔️: | :x: | :x: | -|DC67|[Plug Panel Mod for Schaffner FN286-10-06](./DC67/plug_panel_schaffner)|A modified plug panel for the Power Entry Connector Schaffner FN286-10-06 with two integreated Keystone sockets. |:x:|:grey_question:|:heavy_check_mark:| :x: | -|deepfriedheroin |[V2 Bed Wagos](./deepfriedheroin/v2_bed_wagos) |Wire management for the v2 bed |:x: |:x:|:heavy_check_mark: |:x:| -| | [v0 Wago Bed Mounts](./deepfriedheroin/v0_bed_wagos) | Easy to install Wago mounts for the v0 | :heavy_check_mark: | :x: | :x: |:x:| -| | [v0 Power Wagos](./deepfriedheroin/v0_power_wagos) | Easy to install Wago mounts for v0 mains | :heavy_check_mark: | :x: | :x: |:x:| -|dePrintinator |[HEPA Exhaust](./dePrintinator/HEPA_Filter_Exhaust)| HEPA filter chamber exhaust replacement. |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|:heavy_check_mark:| -|DerekBackus |[Trident Right Skirt Switch](DerekBackus/Right_Skirt_Switch) | Moves power switch to right front skirt on the Trident | :x: | :x: | :x: | :x: | ✔️ | -| |[LED Strip Holder](DerekBackus/LED_Holder) | Simple bracket to mount an LED strip | :x: | :x: | ✔️ | :x: | ✔️ | -|Derpimus |[V0.1 Block Handle](Derpimus/Block_handle_v0.1) | V0.1 Block Style Handle | :heavy_check_mark: | :x: | :x: | :x: | -|DorjeDorf | [Duet 3 6HC Din Bracket](./DorjeDorf/Duet_3_6HC_Din_Bracket) | V2.4 Duet 3 6HC Din Bracket | :x: | :x: | :heavy_check_mark: |:x:| -| |[Duet 3 3HC Din Bracket](./DorjeDorf/Duet_3_3HC_Din_Bracket) | V2.4 Duet 3 3HC Din Bracket | :x: | :x: | :heavy_check_mark: |:x:| -|doubletrouble |[V0 Skirt Mod](./doubletrouble/V0_Skirt_Mod) |V0 Skirt Mod |:heavy_check_mark: |:x: |:x: |:x:| -| Dr-Info | [Corner Cable Cover with Drop Holes](./Dr-Info/corner_cable_cover_with_drop_down_holes) | Corner cable cover around Z-idler with drop holes near z frame and cutouts for inline wiring from 2020 extrustions | :x: | :x: | :heavy_check_mark: | :x: | :x: | -|DrGhetto|[Ghetto Panels](./DrGhetto/GhettoPanels)|Printed panels for the Voron Zero|:heavy_check_mark:|:x:|:x:|:x:| -|eamars| [Stealthburner (RC1) Dragon Volcano Hotend Toolhead Mount](./eamars/stealthburner_crazy_dragon_toolhead) | The Stealthburner toolhead mount for Mellow Crazy, TriangleLab T-Volcano and Phaetus UHF mini|:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| -|eddie |[V1.8 12mm Z Mod](./eddie/V1.8_12mm_Z_Mod) |Add V1.8 option for 12mm Z rods |:x: |:heavy_check_mark: |:x: |:x:| -| |[LED Bar Clip](./eddie/LED_Bar_Clip) |Modular LED Clip for mounting LED Strip to 2020 Extrusions |:x: |:heavy_check_mark: |:heavy_check_mark:|:x:|:heavy_check_mark:| -| edwardyeeks |[Tridentified V2.4 Power Inlet](edwardyeeks/Tridentified_V2.4_Power_Inlet) |Trident style side power inlet for V2.4 using Z Drive Motor Tensioner Mod - By @Amarpal89 |:x: |:x: |:heavy_check_mark: |:x:|:x:| -| elcrni | [V.24/Trident Spool Holder](./elcrni/V2.4-Trident-Spool-Holders) | Spool holder that mounts on top for "too close to the wall" printers | :x: | :heavy_check_mark: | :heavy_check_mark: | :x: | :heavy_check_mark:| -| | [Trident Internal Spool Holder](./elcrni/Trident_Internal_Spool_Holder) | Internal spool holder for 300 and 350 Tridents. Supports full size 1kg spool | :x: | :x: | :x: | :x: | :heavy_check_mark:| -| Electroleon |[U2C Mounting](./Electroleon/U2C_Mounting) | Bigtreetech U2C CAN Interface mounting bracket | :heavy_check_mark: | :heavy_check_mark: |:heavy_check_mark: |:grey_question:|:heavy_check_mark: | -| Ellis |[15x15 Drag Chain End](./Ellis/15x15_Drag_Chain_End) | 15x15 drag chain end piece | :grey_question: | :grey_question: |:heavy_check_mark: |:grey_question:| -| |[Badge Retractor Mount](./Ellis/Badge_Retractor_Mount) | Extrusion mount for badge retractor to keep bowden tube out of the way. | :grey_question: | :grey_question: |:heavy_check_mark: |:x:| -| |[Bed Fans](./Ellis/Bed_Fans) | Bed fan control macros and 5015 bed fan mounts | :x: | :x: |:heavy_check_mark: |:x:| -| |[Short Z Joints](./Ellis/Short_Z_Joints) | Shorter Z joints for the v2.4 |:x: |:x: |:heavy_check_mark: |:x:| -| |[Single MGN9H Carriage](./Ellis/Single_MGN9H_Carriage) | Single MGN9H toolhead carriage with toolhead x endstop support (for umbilical) |:x: |:heavy_check_mark: |:heavy_check_mark: |:grey_question:| -| ElPoPo | [Removable Doors](./ElPoPo/RemovableDoors) | New hinge to easily remove the door and have a wide opening V2.x | :x: | :x: | :heavy_check_mark: | :x:| -| Empusas | [Power Skirt 2.x FN284-10-06](./Empusas/PowerSkirt_FN284-10-06) | Power Skirt for Schaffner FN284-10-06 V2.x | :x: | :x: | :heavy_check_mark: | :x:| -| | [Mounts for Terminal Blocks NC933 SPL-62](./Empusas/Terminal_Blocks_NC933_SPL-62) | Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress | :grey_question: | :grey_question: | :heavy_check_mark: | :grey_question:| -| | [Mounts for BTT Filament Motion Sensor](./Empusas/BTT_Filament_Motion_Sensor_Mount) | Mounts for Big Tree Tech Smart Filament Motion Sensor | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| evandepol | [Crydom GN Terminal Guard](./evandepol/Crydom-GN-Guard) | A simple safety guard for the terminals on a Crydom GN SSR | :x: | :x: | :heavy_check_mark: |:x:| -| | [Voron 2.4 cable clamps](./evandepol/Voron2.4-Cable-clamps) | A set of 2020-mounted cable guards to organize and dress the wiring on your build | :x: | :x: | :heavy_check_mark: |:x:| -| falo | [Magnetic Exhaust Grill Cover](./falo/magnetic_grill_cover) | A magnetic cover to seal the filtered exhaust | :x: | :x: | :heavy_check_mark: | :x: | -| | [Toolhead PCB to CAN Mount Adaptor](./falo/toolhead_pcb_to_can) | A mount to enable side mounting of a CAN board (Huvud/SHT42) in Afterburner PCB spacing | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| | [LGX Lite CAN Side Mount](./falo/lgx_lite_side_can) | A side mounting for a CAN board (Huvud/SHT42) to the LGX Lite | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| Fiction | [C270 mount](./Fiction/C270_mount) | Logitech C270 webcam front-centre mount | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: | -| | [Crossrail](./Fiction/Crossrail) | Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: | -| | [Exhaust_cover](./Fiction/Exhaust_cover) | Cover for exhaust cutout in back panel | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: | -| | [Exhaust_cover_SFS](./Fiction/Exhaust_cover_SFS) | Exhaust cover and BTT Smart Filament Sensor mount | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: | -| | [LGX Lite toolhead PCB mount](./Fiction/LGX_Lite_toolhead_PCB_mount) | Mount for Hartk's toolhead PCB(s) for LGX Lite | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| filotto78 | [6mm slot cover](./filotto78/6mm_slot_cover) | Simple cover for extrusion with 6mm slot width | :x: | :grey_question: | :heavy_check_mark: |:grey_question:| :grey_question:| -| FreeformFez | [V1.8 Filtered Power Inlet](./FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | :x: | :heavy_check_mark: | :x: |:x:| -| GadgetAngel | [Cricut Voron Logos](./GadgetAngel/Cricut_Voron_Logos) |For any cutting machines or machines that rely on vector graphics and use .svg files. These vectors or .svg files are the Voron Design Logos for the Voron 2.4, Voron SwitchWire, Voron 0.0/0.1. and Trident These .svg files use a minimal amount of anchor points to achieve the vector shapes! | :heavy_check_mark: | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| | [Bed Support Extrusions Alignment Tools](./GadgetAngel/Bed_Support_Alignment_Tools) |The bed support alignment tools will assist in helping align the "bed support extrusions" to the frame. When the alignment tools are placed in all four corners of the Voron Printer's frame the "bed support extrusions" will butt up against these tools so that you can screw the "bed support extrusions" down to the printer's frame in the correct position.| :x: | :x: | :heavy_check_mark: | :x: | :x: | -| Galvanic | [Bowden Tube Guide](Galvanic/Bowden_Tube_Guide)| Bowden tube guide and CANBUS wire support |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|:heavy_check_mark:| -| gamebofh | [Laser cut door panels](gamebofh/door-panels)| Files to allow you to create laser cut door panels with some ability to adjust | | :x: | :grey_question: | :heavy_check_mark: | :grey_question:| -| gauravmm | [Crazy Mozzie HF toolhead SB+CW2](./gauravmm/crazy_mozzie_cw2/)| Toolhead for Crazy Mozzie HF, compatible with Stealthburner and Clockwork 2 | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| gen2ng | [Switchwire LED wire pass through](./gen2eng/z_carriage_stop_pass_through) | Z Carriage Stop modification that makes pass through of wires for the LED light bar clean and easy | :x: | :x: | :x: | :heavy_check_mark: | :x: | -| geoffreyyoung | [FYSETC SPIDER DIN Bracket](./geoffreyyoung/spider_bracket) | FYSETC SPIDER DIN Bracket | :x: | :heavy_check_mark: | :heavy_check_mark: | :x: | -| | [Dual Rail Installation Guide](./geoffreyyoung/dual_rail_guide) | Rail installation guide that also works for the 2.4 dual rail installation | :x: | :x: | :heavy_check_mark: | :x: | -| | [LGX Info, Links, and Models](./geoffreyyoung/lgx) | Useful information and models for using the Bondtech LGX extruder wth Afterburner| :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| gerritwellen |[Manta M8P Mount](./gerritwellen/manta-m8p-bracket)| Mounting Bracket for BTT Manta M8P| :x: | :grey_question: | :heavy_check_mark: | :x: | :heavy_check_mark: | -| GiulianoM | [Fly F407ZG Mount](./GiulianoM/FlyF407ZG) | Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG | :x: | :x: | :heavy_check_mark: | :x: | -| Gizzle | [Ender 3 and Ender 3 Pro Switchwire Mod](./Gizzle/ender-3_(pro)_switchwire)| Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics and most other parts of the Voron Switchwire. | :x: | :x: | :x: | :heavy_check_mark: | -| GSL12 | [Pocketwatch Nema 17](./GSL12/pocketwatch_nema17)| Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe for V0 fork with 2020 extrusions, Nema17 and MGN9 or other printers. | :grey_question: | :grey_question: | :grey_question: |:x:| -| Golas | [V0.1 Extended tophat hinge](./golas/v0-extended-tophat-hinge)| Extended tophat for v0.1 with hinges (integrated or screwed ones). | :heavy_check_mark: | :x: | :x: | :x: | :x: | -| | [V0.1 Trident skirt remix with 12864 LCD](./golas/v0-trident-skirt-mix)| Trident style v0.1 skirt mix with 12864 Mini Lcd on front or plain skirt. | :heavy_check_mark: | :x: | :x: | :x: | :x: | -| hhammarstrand | [Afterburner connector cover for 42STH20-1004AS](./hhammarstrand/afterburner_connector_cover_42STH20-1004AS) | Connector cover for 42STH20-1004AS | :x: | :x: | :x: | :heavy_check_mark: | -| hartk1213 | [Voron0 deck panel](./hartk1213/Voron0_deck_panel_with_logo_and_VORON0) | Used @Kruppes blank deck panel to add the logo as well as the name VORON0 | :heavy_check_mark:| :x: | :x: |:x:| -| | [Voron0 display dualcolor](./hartk1213/Voron0_display_dualcolor) | Added a dual color file for the Voron Display Front housing | :heavy_check_mark:| :x: | :x: |:x:| :x:| -| | [Voron0.2 2.8 Waveshare Display](./hartk1213/Voron0.2_2.8_WaveshareDisplay) | 2.8 Waveshare display for V0.2 | :heavy_check_mark:| :x: | :x: |:x:| :x:| -| | [Voron0 C14Inlet](./hartk1213/Voron0_C14Inlet) | Added a new Power inlet that uses a Fused C14 plug and switch that covers the mains contacts | :heavy_check_mark:| :x: | :x: |:x:|:x:| -| | [Voron0.2 Rear Keystone Skirt](./hartk1213/Voron0.2_Rear_Keystone_Skirt) | Added keystone slot on rear skirt for V0.2 | :heavy_check_mark:| :x: | :x: |:x:|:x:| -| | [Voron0 Hinged Top Hat](./hartk1213/Voron0_Hinged_Top_Hat) | Created a new hinged top hat design for the V0 so it can fold away when you dont want a top hat on | :heavy_check_mark:| :x: | :x: |:x:|:x:| -| | [Voron0 ExtendedLegs](./hartk1213/Voron0_ExtendedLegs) | New extended legs to raise the printer up a tiny bit more | :heavy_check_mark:| :x: | :x: |:x:|:x:| -| | [Voron0 ExtrusionSkirt](./hartk1213/Voron0_ExtrusionSkirt) | Created a new skirt design that uses 50mm extrusions as legs and it has a c14 power inlet hole on the bottom | :heavy_check_mark:| :x: | :x: |:x:|:x:| -| | [Voron0 MGN9C X Axis](./hartk1213/Voron0_MGN9C_X_Axis) | This mod, replaces the stock MGN7H for MGN9C on the V0 | :heavy_check_mark:| :x: | :x: |:x:|:x:| -| | [Voron2.4 and Trident Pins Mod](./hartk1213/Voron2.4_Trident_Pins_Mod) | This mod replaces all the M5 screws for all idlers/pulleys/bearings with 5mm pins | :x:| :x: | :heavy_check_mark: |:x:|:heavy_check_mark: | -| | [Voron2.4 Y Endstop Relocation](./hartk1213/Voron2.4_Y_Endstop_Relocation) | This mod relocates the Y endstop to the top A drive piece | :x:| :x: | :heavy_check_mark: |:x:|:x: | -| | [Voron2.4 GE5C](./hartk1213/Voron2.4_GE5C) | This mod replaces the stack of printed z joints with a metal spherical bearing | :x:| :x: | :heavy_check_mark: |:x:|:x:| -| | [Voron2.4 SexBolt ZEndstop](./hartk1213/Voron2.4_SexBolt_ZEndstop) | This mod replaces stock V2 Z endstop with a different style| :x:| :x: | :heavy_check_mark: |:x:|:heavy_check_mark: | -| henrikssn | [Plug Panel Mod for Generic Unfiltered Modules](./henrikssn/plug_panel_generic) | v2.4 plug panel for generic unfiltered modules with 66mm x 27mm cutout such as the Delta 06A2 and Qualtek 761-18 | :x: | :x: | :heavy_check_mark: | :x:| -| | [Parametric Spool Holder](./henrikssn/parametric_spool_holder) | Spool holder where the length is a parameter. | :x: | :heavy_check_mark: | :heavy_check_mark: |:x: | :heavy_check_mark:| -| hergtoler | [Exhaust Housing for 120mm Fan and 4in Duct](./hergtoler/exhaust_120mm_duct) | v2.4 Exhaust Housing for 120mm Fan and 4in Duct | :x: | :x: | :heavy_check_mark: | :x: | :x: | -| hernsl | [Bottom Panel Mag Clip](./hernsl/bottom_panel_mag_clip) | v2.4 magnetic clips to retain bottom panel | :x: | :x: | :heavy_check_mark: |:x:| -|hijax_pl_ |[Corner panel clip](./hijax_pl/corner_panel_clip) |V2 panel corner frames using 3-way L brackets in the corners |:x: |:x: |:heavy_check_mark: |:x:| -| |[Din Rail mount](./hijax_pl/din_rail_mount) |Adapter to attach DIN Rail to 2020 extrusion. |:x: |:x: |:heavy_check_mark: |:x:| -| |[Controler Board adapters](./hijax_pl/ender_compatible_controller_mount) |DIN (rotated) and legacy adapters for boards like SKR mini E3. |:grey_question: |:x: |:heavy_check_mark: |:x:| -| hobson318 | [Klipper Expander Mount](./Hobson318/Klipper_Expander_Mount) | Mounting brackets for the klipper expander using vhb tape or mounting screws | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| | [Belt Tension Wrench](./Hobson318/Belt_Tension_Wrench) | Wrench for easier turning of the belt tension knobs on V0.1 | :heavy_check_mark: | :x: | :x: | :x: | :x: | -|hoschi| [FYSETC Spider DIN Rail Mount](./hoschi/FYSETC_Spider_DIN_Mount) | DIN rail mount for FYSETC Spider | :x: | :grey_question: | :heavy_check_mark: | :grey_question: | -|hymness1| [Quickdraw probe Voron Switchwire](./hymness1/Quickdraw_probe_Voron_Switchwire) | Detachable magnetic probe with docking system for VSW | :x: | :x: | :x: | :heavy_check_mark: |:x:| -| | [10x11mm chain VSW](./hymness1/10x11mm_chain_VSW) | Printable and openable 10x11mm chain | :heavy_check_mark: | :grey_question: | :grey_question: | :heavy_check_mark: |:grey_question:| -|Iakabos| [c920 Mount](./Iakabos/C920_mount)|Slim mount for logitech c920 webcam|:x:|:heavy_check_mark:|:heavy_check_mark:|:x:| -| | [V0 beltchains](./Iakabos/V0_beltchain)|Modified beltchain parts for V0 Z cables|:heavy_check_mark: |:x: |:x: |:x:| -| iblue | [V0.1 Tophat Extractor](./iblue/TophatExtractor) | Tophat Extractor for the Voron V0.1 with activated charcoal and HEPA filter | :heavy_check_mark: | :x: | :x: | :x: | :x: | -| jappaj | [V0.1 FanSaver](./jappaj/FanSaver) | A printable fix for overheating V0.1 blower fans | :heavy_check_mark: | :x: | :x: | :x: | :x:| -|jasonc |[V2.4 Z-Idler Shoulder Bolt Mod](./jasonc/Z_Idler_Shoulder_Bolt) |Modification to the idler carriers to accept a 25mm shoulder bolt. Ideal for Gates idlers. |:x: |:x: |:heavy_check_mark: |:x:| -| Jasrags | [Feed slot with filament pass-through](./Jasrags/sw_fee_slot_filament_passthrough) | A feed slot with a filament pass-through | :x: | :x: | :x: | :heavy_check_mark: |:x:| -| jatson | [Plug panel mod for Schurter CD44.1101.151 power entry](./jatson/plug_panel_schurter) | A modified plug panel for Voron 2.4r1 with Schurter CD44.1101.151 power entry modul. The panel has a LAN socket as well. | :x: | :grey_question: | :heavy_check_mark: | :x: |:x:| -| jaysuk | [4.3 Fly Screen Mount](./jaysuk/4.3_fly_screen_mount) | A mount for a 4.3" Fly Screen | :heavy_check_mark: | :x: | :x: | :x: |:x:| -|JD |[V2.4 Filament runout sensor](./JD/RefillPlease) | Replace the 2.4 stock bowden tube holder and add a filament runout sensor | :x: | :heavy_check_mark: | :heavy_check_mark: | :grey_question: | :heavy_check_mark: | -|jeoje |[V2.4 Z Chain Guide with Integrated Chamber Thermistor Mount](./jeoje/Z_Chain_Guide_Thermistor_Mount) | Modifies the Z chain guide to hold a chamber thermistor |:x: |:x: |:heavy_check_mark: |:x:| -| | [4.3" Touchscreen Mount](./jeoje/4.3_Inch_Touchscreen_Mount) | Mounts a [Waveshare 4.3inch Capacitive Touch Display](https://www.waveshare.com/4.3inch-dsi-lcd.htm) to v2.4 and Switchwire Vorons |:x:|:x:|:heavy_check_mark:|:heavy_check_mark:| -| | [Sturdy Handles](./jeoje/Sturdy_Handles) | Modified v2.2 handles with no panel rest and with 4 anchor points |:x: |:grey_question:|:heavy_check_mark:|:x:| -| | [Molex MLX and Microfit 3.0 Bed Connector Mount](./jeoje/Molex_MLX_Microfit_Bed_Connector_Mount) | Solid mount your bed connectors |:x: |:x:|:heavy_check_mark:|:x:| -| JeremyRuhland | [V2.4 Plug Panel Generic Combo](./JeremyRuhland/V2.4_Plug_Panel_Generic_Combo) | Skirt power panel for generic amazon plug/switch/fuse combo module, with 2 keystone sockets | :x: | :x: | :heavy_check_mark: | :x: | :x: | -| jgehrig | [V0 LCD Touchscreen Skirt](./jgehrig/v0_lcdskirt) | 3.2" LCD Touch Screen Skirt | :heavy_check_mark: | :x: | :x: | :x: | -| JJFX | [V2.4 CR Touch Snap Mount ](./JJFX/CRTouch_Snap_Mount) | Mount to replace v2.4 (MGN9) probe with a Creality CR Touch | :x: | :grey_question: | :heavy_check_mark: | :x: | :x: | -| JNP | [Back Door](./JNP/Back-Door) | Door for easy hardware access | :heavy_check_mark: |:x: |:x: |:x: | -| | [Deck Panel](./JNP/Deck_Panel_Rear)| Covers the hotbed cables | :heavy_check_mark: |:x: |:x: |:x: | -| | [Drawer](./JNP/Drawer)| Drawer in four different versions | :heavy_check_mark: |:x: |:x: |:x: | -| | [Front Door](./JNP/Front-Door)| Door in a frame | :heavy_check_mark: |:x: |:x: |:x: | -| | [Hepa Filter](./JNP/HEPA-Filter)| Filter case with fan´s | :heavy_check_mark: |:x: |:x: |:x: | -| | [Mid Panel](./JNP/Mid-Panel)| Panel for SKR1.4/1.4 or SKR E3 mini mount | :heavy_check_mark: |:x: |:x: |:x: | -| | [Neopixel Case](./JNP/Neopixel-Y_Rails) | mounting for Neopixel strip with 8 LED´s | :heavy_check_mark: |:x: |:x: |:x: | -| | [Side Panels](./JNP/Side-Panels) | Panels with intergrated hinge | :heavy_check_mark: |:x: |:x: |:x: | -| johanncc | [Raspberry Pi Camera Mount](./johanncc/Raspberry_Pi_Camera_Mount) | Low profile raspberry pi camera mount |:heavy_check_mark:|:x:|:x:|:x:|:x:| -| Jon | [1515 LED Mount](./Jon/1515_led_mount) | Snap in 1515 Led mount for WS2812B |:heavy_check_mark:|:x:|:x:|:x:|:x:| -| | [adxl345 skirt keystone](./Jon/adxl345_skirt_keystone) | Skirt keystone for ADXL345 using Microfit 3.0 | :x: | :x: | :heavy_check_mark: | :grey_question: | :grey_question: | -| joposter | [V0 Clippable LED Caselight](./joposter/v0_clippable_ledmounts) | LED Case light for the V0 that clips into the extrusions | :heavy_check_mark: | :x: | :x: | :x: | :x: | -| JosAr | [Klicky Probe](./JosAr/Klicky-Probe) | Microswitch based inductive probe replacement | :heavy_check_mark: | :heavy_check_mark: |:heavy_check_mark: | :x: | :heavy_check_mark: | -| KageUrufu | [Euclid Probe Carriage](./kageurufu/mgn12-euclid) | A MGN-12 carriage with an inset mount for a Euclid Probe | :x: | :heavy_check_mark: | :heavy_check_mark: | :grey_question: | :heavy_check_mark: | -| KenadyDwag44 | [Switchwire Lightbar](./KenadyDwag44/sw_lightbar) | A LED lightbar for switchwire | :x: | :x: | :x: | :heavy_check_mark: | -| KevinAkaSam | [VEFACH](./KevinAkaSam/VEFACH) | Voron Exhaust Filter Inserts for Activated Coal + Hepa | :x: | :grey_question: | :heavy_check_mark: | :x: | :heavy_check_mark: | -| Khay | [V0 Micro Backplate](./khay/micro_backplate) | Minimalistic backplate for cooler motors and electronics | :heavy_check_mark: | :x: | :x: | :x: | :x: | -| | [Fan for V2-200mm²](./khay/V2-200_4020_Electronics_Fan) | Middle Skirt for V2-200mm² Electronics Compartment | :x: | :x: | :heavy_check_mark: | :x: | :x: | -| | [3x Keystone PlugPanel](./khay/V2_3x_Keystone_Plugpanel) | PlugPanel with Options for 3 Keystones | :x: | :x: | :heavy_check_mark: | :x: | :x: | -| KiloQubit | [V0 Reverse Bowden Mount](./KiloQubit/V0_reverse_bowden_mount)| V0 reverse bowden mount | :heavy_check_mark: | :x: | :x: |:x:| -| | [V2.4 Z Chain Mounts for 3 Hole Chains](./KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts)| Z chain mounts for 3 hole generic chain | :x: | :x: | :heavy_check_mark: |:x:| -| | [Trident Schurter Inlet Skirt](./KiloQubit/trident_schurter_power_inlet)| Trident inlet skirt for mounting a Schurter DD11.0124 or similar inlet | :x: | :x: | :x: | :x: | :heavy_check_mark: | -| kirby | [V0 Sherpa Mini Direct Drive Mod](./kirby/v0_sherpa_mini_direct_drive)| A direct drive mod for the V0 using the Annex Sherpa Mini extruder | :heavy_check_mark: | :x: | :x: |:x:| -| Koios | [6mm Tempered Glass Mod](./Koios/6mm_Glass) | Lock levers and rests for 6mm Tempered glass panels | :x: | :x:| :heavy_check_mark: | :x: | -| | [C920 Low Profile Mount](./Koios/C920_Mount) | Low profile mount for a C920 Webcam | :x: | :x: | :heavy_check_mark: | :x: | -| | [LED Bar Mounts](./Koios/LED_Mounts) | Low profile mount for led bar lights | :x: | :x: | :heavy_check_mark: | :x: | -| | [V0 C920 Tophat Mount](./Koios/V0_C920_Tophat_Mount) | Mounting bracket for a Logitech C920 on the tophat | :heavy_check_mark: | :x: | :x: | :x: | -| Kosh42EFG |[Kirigami bed front](./Kosh42EFG/kirigami_bed_front) |Printed bed front for kirigami folded metal bed mount with Voron logo. |:heavy_check_mark: |:x: |:x: |:x: |:x: | -| Kruppes |[Belt Tension Meter](./Kruppes/Tension_Meter) | Print in place tension meter to easily tighten multiple belts to the same tension |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark:| -| |[Encosed Bottom](./Kruppes/Closed_Bottom) | Modified printed parts and panel to fully enclose V0. |:heavy_check_mark: |:x: |:x: |:x:| -| |[V0 Printed Deck with inserts](./Kruppes/Deck_Panel_inserts_logo) |Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo. |:heavy_check_mark: |:x: |:x: |:x:| -| Kyleisah |[CableGator Cable Comb](./Kyleisah/CableGator) | A cable comb for simplifying and tidying wire harnesses for printers with drag chains |:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| -| lakai | [Bruag Skirts](./lakai/Bruag_Skirts) | V2 350mm skirts inspired by Bruag Facades | :x: | :x: | :heavy_check_mark: | :x: | -|Le0n|[Magnetic panels with Magnet Inserts](./Le0n/Magnetic_Panels_with_Magnet_Inserts)| Magnetic panel mounts with magnets inserted into frame slots. |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:|:heavy_check_mark:| -|leandromarceddu|[PowerSkirt](./leandromarceddu/PowerSkirt) |Modified skirtpiece for a digital power monitor|:x:|:grey_question:|:heavy_check_mark:|:grey_question:| -|littleferris |[V0 c14 Skirt Inlet](./littleferris/V0_Skirt_Inlet) |V0 C14 Skirt inlet |:heavy_check_mark: |:x: |:x: |:x:| -| LJ | [Scrubby](./LJ/Scrubby) | Easy to use filament dust filter | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark:| -|LoCoCNC| [MGN7H Shims](./LoCoCNC/MGN7H_Shims) | Shims for making bearing cartridges coplanar |:heavy_check_mark:|:x:|:x:|:x:| -| | [Mosquito PTFE 15mm Tube Cutting Jig](./LoCoCNC/Mosquito_PTFE_Cutting_Jig) | Tool to precicely cut 15mm PTFE Tube |:heavy_check_mark:|:x:|:x:|:x:| -| | [3mm Top Hat Panels Clips](./LoCoCNC/3mm_tophat_panel_parts) | Required to use the 3mm (1/8") thick top hat panels for V0.1 |:heavy_check_mark:|:x:|:x:|:x:| -| | [Strain Relief w/ 10 Pin Microfit](./LoCoCNC/Strain_Relief_w_Microfit) | Strain Relief with 10 pin Microfit connector |:heavy_check_mark:|:x:|:x:|:x:| -| | [SSR Mounting Strap](./LoCoCNC/ssr_strap) | Mounting Strap for SSR on 1515 Extrusions |:heavy_check_mark:|:x:|:x:|:x:| -| | [V2.4 Bed Wiring Grommet](./LoCoCNC/wire_grommets) | Safely capture your bed wires thru the bottom panel |:x:|:x:|:heavy_check_mark:|:x:| -|LoganFraser| [ComboInlet](./LoganFraser/ComboInlet) | Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes. |:x:|:x:|:heavy_check_mark:|:x:|:heavy_check_mark:| -||[HorseshoeSpoolHolder](./LoganFraser/HorseshoeSpoolHolder) | Horseshoe Spool Holder - mounts internally for Trident, or externally for V0, V1, or V2 printers. |:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|:x:|:heavy_check_mark:| -||[PiPlate](./LoganFraser/PiPlate) | PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for V2.4/Trident |:x:|:x:|:heavy_check_mark:|:x:|:heavy_check_mark:| -||[Trident Inverted Electronics](./LoganFraser/TridentInvertedElectronics) | Flip the Trident electronics bay for top access. |:x:|:x:|:x:|:x:|:heavy_check_mark:| -||[WagoMounts](./LoganFraser/WagoMounts) | Wago Mounts for Din Rail or 2020 Extrusion mounting. |:grey_question:|:grey_question:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| -|Long| [Mantis Dual 5015 Toolhead](./Long/Mantis_Dual_5015) | MGN12 Dual 5015 Toolhead for 2.4 & 1.8 |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:| -| Lukas | [SSD1306 Case Front Cover](./Lukas/SSD1306_Case_Front_Cover) | SSD1306 Mount replacement for Mini12864 | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: | -|Mac10goesBRRRT| [PiTFT Mount](./Mac10goesBRRRT/BTT_PiTFT) | Mount for the BTT PiTFT Touchscreen |:x:|:grey_question:|:heavy_check_mark:|:grey_question:|:heavy_check_mark:| -|Majarspeed| [Hartk board mount galileo](./Majarspeed/Hartk_Mount_Galileo) | It hangs stuff on your tool | :x: | :x: | :heavy_check_mark: | :x: | -|MakeALeft| [Switchwire Clean Center Grill](./MakeALeft/Switchwire_Front_Grill) | Removed magnet holders on center panel for cleaner look | :x: | :x: | :x: | ✔️ | :x: -|madfabrications |[Vertical PSU Mount](./madfabrications/Vertical_PSU_Mount) |Mounts the PSU vertically on the DIN rails|:x: |:x: |:heavy_check_mark:|:x:| -|madros |[V0 OLED-skirt](./madros/V0_skirt_OLED) |V0 skirt with 0.96" OLED|:heavy_check_mark: |:x: |:x: |:x:| -| MasturMynd | [Stealth Zero](./MasturMynd/Stealth_Zero) | A low poly gantry with front tensioners and optional front mounted x rail | :heavy_check_mark: | :x: | :x: | :x: | :x: | -|MathematicalPotato| [V0.1 Belted Z Drive](./MathematicalPotato/v0.1_belted_z_drive) | Conversion to a belted Z axis for the V0.1 adapted from theFPVGeek's mod for the V0.0| :heavy_check_mark: | :x: | :x: | :x: | -|Maverick | [MiniSB_Sharkfin](./Maverick/MiniSB_Sharkfin) | Modified MiniSB to use a Sharkfin Extruder | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |:heavy_check_mark:|:heavy_check_mark: | -| | [MiniSB_Rapido](./Maverick/MiniSB_Rapido) | Modified MiniSB to use a Rapido hotend | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |:heavy_check_mark:|:heavy_check_mark: | -| | [MiniSB_LGXL](./Maverick/MiniSB_LGX_Lite) | A Bondtech LGX Lite variant of the MiniSB | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |:heavy_check_mark:|:heavy_check_mark: | -| | [V0.2 Handles](./Maverick/V0.2_Handles) | Add handles to the extrusion tophat | :heavy_check_mark: | :x: | :x: |:x:| :x:| -| | [V0.2 Stealth Skirts](./Maverick/V0.2_Stealth_Skirts) | Juiced up skirts for the V0.2 | :heavy_check_mark: | :x: | :x: |:x:| :x:| -| maximilian-foerg | [Afterburner Turbo Mod](./maximilian-foerg/AB_Turbo_Mod) | A purely cosmetic mod for Afterburner | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| | [Switchwire Double 60mm Fan Mount](./maximilian-foerg/VSW_Double_60mm_Fan_Mount) | A mount for two (or four) 60mm fans in SW's electronics compartment | :x: | :x: | :x: | :heavy_check_mark: | :x: | -| MCKURT |[Switchwire Y Belt Tensioner](./Mckurt/Switchwire_Y_Belt_Tensioner) | Switchwie Y axis Belt Tensioner | :x: | :x: | :x: | :heavy_check_mark: | :x: | -| MCMBen | [Voron0 Block & Tackle Z Belt](./MCMBen/Voron0_Block_and_Tackle_Z_Belt) | A block & tackle belted Z solution using NEMA14. Ratios from 5:1 to 8:1 and friction prevent Z drop when powered off. | :heavy_check_mark: | :x: | :x: | :x: | :x: | -| Mellow | [V0 Fly-Gemini](./Mellow/V0_Fly-Gemini) | Fly-Gemini adapted model for V0 | :heavy_check_mark: | :x: | :x: | :x: | :x:| -| mikepthomas | [MKS Mosfet Mount](./mikepthomas/MKS_Mosfet_Mount) | MKS Mosfet Mount based of the Trident Raspberry Pi Mount. | :x: | :heavy_check_mark: | :heavy_check_mark: | :x: | :heavy_check_mark: | -|MikesMods|[LGX mount for V0.1 with 2nd X rail](./MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail) |V0.1 mod for mounting Bondtech LGX extruder with addition of 2nd X rail on the back of the 1515 extrusion. | :heavy_check_mark: | :x: | :x: |:x:|:x:| -| Minsekt | [Rear Umbilical](./Minsekt/Rear_Umbilical) | Rear Umbilical mounting solution including a relocated Y-Endstop | :x: | :grey_question: | :heavy_check_mark: | :x: | :x: | -|mjoaris |[10x11 Cable Chain Endcaps](./mjoaris/10x11_Cable_Chain_Endcaps) |Printable Endcaps for 10x11 Cable Chains |:x: |:heavy_check_mark: |:heavy_check_mark: |:x:| -| |[Mini12864 LCD Mount](./mjoaris/Mini12864_LCD_Mount_for_V2.4) |Swiveling case for the Fysetc Mini12864 LCD |:x: |:grey_question: |:heavy_check_mark: |:x:| -|Mosher|[Door hinges with M3 screws shafts](./mosher/m3_door_hinges) |Simple mod of print in place door hinges, which uses m3 screws as shafts. |:x:|:x:|:heavy_check_mark:|:x:| -|mpfl |[V0.1 OLED-skirt](./mpfl/V0.1_skirt_OLED) |V0.1 skirt with 0.96" OLED|:heavy_check_mark: |:x: |:x: |:x:| -|MrBean66| [SKR Pro DIN Mount](./MrBean66/SKR_PRO_Mount/) |Simple mod to mount the SKR Pro board from BTT to a DIN rails. |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:| -|MrDespair| [MiniAB Pinda Probe Mount](./MrDespair/MiniAB_Pinda/) |Replacement MiniAB Cowling to add a mount for a Pinda style probe. |:heavy_check_mark:|:x:|:x:|:x:|:x:| -|Mrgl-Mrgl| [LGX Lite Mount](./Mrgl-Mrgl/LGX_Lite_Mount/) | a mount for the LGX Lite | :x: | :heavy_check_mark: | :heavy_check_mark: | :x: | :heavy_check_mark:| -|MSA| [Belt tension helper](./MSA/V0-Belt-tension-helper)| Belt tension helper for V0.1 |:heavy_check_mark:|:x:|:x:|:x:| -|MSiemons| [Tophat Hinge V0](./MSiemons/TophatHingeV0.1)| Simple hinge for V0 Tophat |:heavy_check_mark:|:x:|:x:|:x:| -|muradir|[Zodiac BMO Stealthburner Toolhead](./muradir/Zodiac_BMO_Stealthburner_Toolhead)|A Stealthburner toolhead for the Zodiac BMO Hotend, based on the Phaetus BMO toolhead. | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -|Nashuar|[V0 Dragon Toolhead M2.5x8](./Nashuar/V0_Dragon_ToolheadStockScrews) |This toolhead uses the stock M2.5 screw that came with the dragon hotend |:heavy_check_mark:|:x:|:x:|:x:| -|natewalck |[V1.8 Jigs](./natewalck/v1.8_Jigs) |Jigs for assembling V1.8 |:x: |:heavy_check_mark: |:x: |:x:| -| nhchiu | [V0.1 Movable Pulley Z Drive](./nhchiu/V0.1_Movable_Pulley_Z) | A movable pulley system on the Z axis with 1:8 total speed ratio for V0.1 | :heavy_check_mark: | :x: | :x: | :x: | :x: | -| nikolasbabetas | [Neopixel Holder ](./nikolasbabetas/Neopixel_Holder) | A holder to attach Neopixel/WS2812B Led Strips to the V0.1 | :heavy_check_mark: | :x: | :x: | :x: |:x:| -|Nomsplease |[60mm Shaft Jig](./Nomsplease/60mm_Shaft_Jig) |Simple jig for cutting and grinding 60mm Z shafts |:x: |:x: |:heavy_check_mark: |:x:| -| |[Duet Wifi Mount](./Nomsplease/V0_Mods/duet_wifi_mount) | Duet wifi mount in pocketwatch location |:heavy_check_mark: |:x: |:x: |:x:| -| |[LED Mounts](./Nomsplease/V0_Mods/led_mounts) | Basic LED mounts for 10 and 12mm strips |:heavy_check_mark: |:x: |:x: |:x:| -| |[Remixed Panel Mounts](./Nomsplease/V0_Mods/panel_mounts) | Remixed rear bottom panel mounts with stop |:heavy_check_mark: |:x: |:x: |:x:| -| |[Pi Cam/ZeroW Mount](./Nomsplease/V0_Mods/pi_zero_camera_mount) | Mount for pi camera and ZeroW |:heavy_check_mark: |:x: |:x: |:x:| -| |[Pocket Watch Rear Reolcation Bracket](./Nomsplease/V0_Mods/pocket_watch_rear_relocation) | Pocket watch rear reolcation bracket |:heavy_check_mark: |:x: |:x: |:x:| -|Oakman |[FYSETC Spider Metal DIN Mount](./Oakman/FYSETC_Spider_Metal_DIN_Mount) |Use a metal DIN mount for your FYSETC Spider |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:| -| |[BTT 24V UPS Metal DIN Mount](./Oakman/BTT_24V_UPS_Metal_DIN_Mount) | Adapter to use a metal DIN mount for the BTT 24V UPS |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:| -| |[RPI Metal DIN Mount](./Oakman/RPI_Metal_DIN_Mount) | Adapter for metal DIN mounting the Raspberry Pi |:x:|:heavy_check_mark:|:heavy_check_mark:|:x:| -|OboMaker3D |[C17-EXT Filter HEPA Carbon](./OboMaker3D/C17-EXT) |Replaces standard filter with new HEPA Crabon and 120mm fan V1.1 |:x:|:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| -| |[C17-EXT-CARTRIDGE for C17-EXT filter](./OboMaker3D/C17-EXT-CARTRIDGE) | Alternative to a commercial cartridge for the C17-EXT filter |:x:|:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| -|ommy | [roller brackets](./ommy/roller_brackets) |Brackets to help rolling V2 on its side. |:x: |:x: |:heavy_check_mark: |:x:| -|oxno | [RBP Zero Bracket](./oxno/rbp_zero_braket) |Bracket for Raspberry pi zero. |:x: |:heavy_check_mark: |:heavy_check_mark: |:grey_question:| -|padok |[Chain Anchor - ADXL345 mount Mod](./padok/chain_anchor-ADXL345_mount) | A ADXL345 mount for the Afterburner |:x: |:grey_question: |:heavy_check_mark: |:grey_question: | -|Phalanx |["Other" Idlers Mod](./Phalanx/Other-V2-Idlers/) | Allow usage of wider toolheads on the V2 |:x: |:grey_question: |:heavy_check_mark: |:x:| -|piet206 |[V1.8 Z Rails Mod](./piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion |:x: |:heavy_check_mark: |:x: |:x:| -| Polared | [Power Inlet with Keystone Insert](./Polared/Power_Inlet_w_Keystone_Insert) | Voron 0.1 Power inlet with keystone insert slot | :heavy_check_mark: | :x: | :x: | :x: | :x:| -| prasadp4009 | [StealthBurner CR Touch Mod](./prasadp4009/SW_SB_CRTouch) | Voron SW StealthBurner CR Touch Mod | :x: | :x: | :x: | :heavy_check_mark: | :x:| -|Polar-Ted|[V0.1 Two Piece Back Panel](./Polar-Ted/V0_Two_Piece_Back_Panel/) | Vented 2 piece back panel for V0 |:heavy_check_mark: |:x: | :x: | :x: | :x: | -| |[V0.1 Z nozzle endstop switch](./Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch/) | Sexbolt style switch for V0 |:heavy_check_mark: | :x: | :x: | :x: | :x: | -| Printopal | [Magnetic top panel](Printopal/Magnetic_top_panel) | Top panel with magnets allows for quick installation and removal | :x: | :heavy_check_mark:| :heavy_check_mark: | :x: | -| PsychoShaft | [C92X_PsycHoShafts_Mount](./PsychoShaft/C92X_PsycHoShafts_Mount) | 2020 Top profile 920 camera mount / 2 point axis pivot | :grey_question: | :heavy_check_mark: | :heavy_check_mark: | :x: | :heavy_check_mark: | -|QuackProfit|[V0 Adafruit NeoPixel LED Mounts](./QuackProfit/V0-Adafruit-Y_Rails) | Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions | :heavy_check_mark:|:x:|:x:|:x:| -| quattroerik | [V2.4 Door Hinge M3 3mm 180deg](./quattroerik/front_door_m3_180_deg_3mm) | Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw as shaft | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: | -|randell |[Door Hinges](./randell/Door_Hinges) |Door hinges that use an M3 bolt for a pin and bolts thru the panel |:x: |:x: |:heavy_check_mark: |:x:| -||[Microswitch Pod for PCB](./randell/Microswitch_Endstop) |Modified endstop pod for use of endstop switches mounted on a PCB |:x: |:x: |:heavy_check_mark: |:x:| -| raymondh | [Large Spool Holders](./raymondh/LargeSpoolHolders) | Larger spool holders for KVP spools | :x: | :heavy_check_mark: | :heavy_check_mark: |:x:| -| reapola | [MKS CANable Pro DIN Mount](./reapola/MKS_CANable_Pro_mount) | MKS CANable Pro mount which mounts on a DIN rail |:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| -| reQu1em00 | [Kirigami LED Bed Front](./reQu1em00/Kirigami_LED_Bed_Front) | Kirigami bed front with space for a single LED or Neopixel button |:heavy_check_mark:|:x:|:x:|:x:|:x:| -| revnull | [Raspberry Pi 7inch Display Mount](./revnull/rpi_7in_display_mount) | An articulating mount for the offical Raspberry Pi 7inch touch screen | :grey_question: | :grey_question: | :heavy_check_mark: | :grey_question: | -|Rhastlyn |[Wansview 1080p Camera Mount](./Rhastlyn/WansviewCameraMount) |A camera mount that replaces the OEM part to allow the camera to be mounted to a 2020 extrusion | :x: |:grey_question: |:heavy_check_mark: |:x:| -| |[60mm Fan Cover](./Rhastlyn/60mmFanCover)|A easy to install cover for spec 60mm fans originally designed for a 2.4 build| :x: |:grey_question: |:heavy_check_mark: |:x:| -| richardjm | [ADXL drag chain mount](./richardjm/adxl-chain) | Permanent mount for ADXL boards on the back of the motor, replacing the drag chain mount. | :x: | :x: | :heavy_check_mark: | :x: | :grey_question: | -| | [Back blanking plate](./richardjm/back-plate) | Back blanking plate that can be used instead of the exhaust filter housing if you are using something like a nevermore filter instead. | :x: | :x: | :heavy_check_mark: | :x: | :grey_question: | -| | [LED 15.5mm quarter round mounts](./richardjm/led-mounts) | Mounting corners with integrated cable runs for 15.5mm quarter round aluminium led extrusions. | :x: | :x: | :heavy_check_mark: | :x: | :grey_question: | -| | [Printable snap latches for 2020 extrusion](./richardjm/snap-latch-2020) | Quick release panel latch inspired by the work of others. | :x: | :grey_question: | :heavy_check_mark: | :grey_question: | :grey_question: | -| | [Picam corner mount](./richardjm/picam-corner) | Out of the way corner mounted picam | :x: | :x: | :heavy_check_mark: | :x: | :grey_question: | -| roboticator24 | [Touchscreen for OctoDash](./roboticator24/4inch_touchscreen_mount_for_v2.4) | Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual 12864 panel to allow you to run the amazing OctoDash touch UI | :x: | :x: | :heavy_check_mark: |:x:| -| RockNLol | [RockNRoll](./RockNLol/RockNRoll) | Rockers to roll the printer on its back for easier access to the electronics compartment | :x: | :grey_question: | :heavy_check_mark: | :x: | :grey_question: | -| rngSplat | [Printable Switchwire Deck Plate](./rngSplat/SW_Deck_Plate) | Print a deck plate for Switchwire with debossed Voron logo | :x: | :x: | :x: | :heavy_check_mark: | -| rsheng118 | [BTT octopus DIN vertical mount](./rsheng118/BTT_octopus_DIN_vertical_mount) | DIN vertical mount for Big Tech Tree Octopus board | :x: | :x: | :heavy_check_mark: | :x: | -| ryandam | [Cable Management Duct](./ryandam/Cable_management_duct) | Zip tie mount intergrated cable duct to hide your cable | :heavy_check_mark: | :grey_question: | :grey_question: | :grey_question: | :grey_question: | -|sammynorway | [LGX stealthburner connector cover](./sammynorway/LGX-stealthburner-connector-cover) | Cable cover for LGX and stealthburner | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| samwiseg0 | [Microfit 2x3 Skirt Connector (ADXL)](./samwiseg0/microfit_2x3_skirt_connector_adxl) | Mod for a Microfit 2x3 connector to be mounted in a skirt | :x: | :x: | :heavy_check_mark: | :grey_question: | :grey_question: | -| | [AB Plug (Microfit 1x4)](./samwiseg0/ab_plug_microfit_1x4) | Mod to mount A & B motor connectors to the gantry | :x: | :x: | :heavy_check_mark: | :x: | :grey_question: | -| | [LRS PSU Screw Terminal Cover](./samwiseg0/lrs_screw_terminal_cover) | Mod to cover the screw terminals for several LRS style PSUs | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| | [4 Channel Relay Under Deck Mount](./samwiseg0/4channel_relay_under_deck_mount) | Mod to mount a 4 channel GPIO controlled relay | :x: | :x: | :heavy_check_mark: | :x: | :grey_question: | -| | [ESP8266 NodeMCU Din Mount](./samwiseg0/esp8266_nodemcu_din_mount) | Din mount for ESP8266 NodeMCU | :x: | :grey_question: | :heavy_check_mark: | :x: | :heavy_check_mark: | -| | [Corner Cable Hide/Cover (LED Wires)](./samwiseg0/corner_cable_hide) | Mod to hide cables around z idlers | :x: | :x: | :heavy_check_mark: | :x: | :x: | -| | [Extrusion/Chamber Thermistor Mount](./samwiseg0/extrusion_thermistor_mount) | Extrusion mount for a NTC100K Thermistor extrusion | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| | [Corsair Flash Voyager GTX Din Mount](./samwiseg0/voyager_gtx_din_mount) | Din carrier for a Corsair Flash Voyager GTX | :x: | :grey_question: | :heavy_check_mark: | :x: | :heavy_check_mark: | -| scanlory | [Clip-On Front Door Frame](./scanlory/clip_on_door_frame) | Clip-on frame to stiffen and seal front door panels when using modified hinges. | :x: | :x: | :heavy_check_mark: |:x:| :x: | -| ScramblerUSA | [Side Skirt Power Switch](./ScramblerUSA/SideSkirtPowerSwitch) | Skirt-mounted rocker switch for easy access for Voron 2.4 | :x: | :x: | :heavy_check_mark: | :x: | :x: | -| See1807 | [TopHat Exhaust and LED Light](./See1807/Voron_V0_Exhaust_and_LED_Mod) | A mount for 10mm LED strips and Exhaust for Voron V0 | :heavy_check_mark: | :x: | :x: | :x: | -| Shiftingtech | [Trident Dual Power Switch](./Shiftingtech/Trident_dual_power_switch/) | A replacement skirt, allowing 2 power switches | :x: | :x: | :x: | :x: | :heavy_check_mark: | -| ShinyPants | [OrangePi 3 LTS DIN Rail bracket](./ShinyPants/Orange_Pi_3_LTS_DIN) | A DIN rail mount for OrangePi LTS 3 | :x: | :heavy_check_mark: | :heavy_check_mark: | :x: | :heavy_check_mark: | -| Shteeeeeve | [V0.1 LED Tophat](./Shteeeeeve/V01-LED-Tophat) | V0.1 LED Tophat w/ 24V LED Lightstrip | :heavy_check_mark: | :x: | :x: | :x: | -| Slidr | [PanzerBalls 2.4](./Slidr/PanzerBalls2.4) | Squash Ball Feet for V2.4 | :x: | :x: | :heavy_check_mark: |:x:| :x: | -| | [PanzerChain 2.4](./Slidr/PanzerChain2.4) | Energychain for V2.4 | :x: | :x: | :heavy_check_mark: |:x:| :x: | -| slitte | [PCB_Probe](./slitte/PCB_Probe) | PCB for BAT85 and pull up resistor | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: | -| | [ssd_bracket](./slitte/ssd_bracket) | bracket for mounting a 2.5" ssd to a din rail | :x: | :x: | :heavy_check_mark: | :x: | :heavy_check_mark: | -|sloscotty|[Switchwire Wall Plate](./sloscotty/SW_Wall_Plate)|SW plate for enclosure|:x:|:x:|:x:|:heavy_check_mark:| -| | [NoNutz TopHat Cam Extension](./sloscotty/TopHat_Cam_Extension) | Tophat extension with integrated webcam for V0/0.1 | :heavy_check_mark: | :x: | :x: | :x: | :x: | -| spacelab2021 | [Orbiter Clockwork Mount](spacelab2021/Orbiter-Clockwork) | A clockwork adaptor for the Orbiter v1.5 Extruder with full integration into the Afterburner. Includes a filament quick release lever for simple filament loading and unloading. | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| Spaghetti-Bolognese |[Simplified Z Drive Motor Mount](Spaghetti-Bolognese/Z_drive_motor_mount) | Z drive motor mount bracket mod to improve pulley to belt alignment | :x: | :x: | :heavy_check_mark: |:x:| -| |[LCD Case Mod](Spaghetti-Bolognese/LCD_case_mod) | Improvements to the V2.4 mini12864 LCD case inc E-stop button cover | :x: | :x: | :heavy_check_mark: |:x:| -| sse018 | [Octopus DIN Rail bracket](./sse018/Octopus_DIN_Rail_bracket) | A Din rail mount for BTT Octopus board | :x: | :x: |:heavy_check_mark: | :x: | -| strayr | [Creality toolhead for stealthburner](./strayr/stealthburner_creality_toolhead/) | Use a creality ender 3 style hotend with stealthburner | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :x: | -| sttts | [Waveshare 5.5inch HDMI AMOLED Mount](./sttts/Waveshare-5.5-inch-HDMI-AMOLED) | Mod to mount a Waveshare 5.5inch full HD display on a V2 | :x: | :x: | :heavy_check_mark: | :heavy_check_mark: | -|StvPtrsn |[Skirts for a 320mm Build](./StvPtrsn/320mm_Build) |Skirts for a 320mm build |:x: |:x: |:heavy_check_mark: |:x:| -| |[Keystone Jack for Filtered Mains Panel](./StvPtrsn/Keystone_Jack_Filtered_Mains_Panel) |Add a keystone jack to your filtered mains plug panel |:x: |:x: |:heavy_check_mark: |:x:| -| |[Side Fan Support, No Tape](./StvPtrsn/Side_Fan_Support_No_Tape) |Mount the 60mm side fans and inserts without tape |:x: |:x: |:heavy_check_mark: |:x:| -| |[Parts_Jigs and Mods](./StvPtrsn/Parts_Jigs_and_Mods) |Parts, Jigs and modifications I use for my builds |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark:|:heavy_check_mark:| -| TAKUYA | [WANSVIEW USB Camera Mount](./Takuya/USBCameraMount/) | WANSVIEW 1080p Camera Mount for Voron 2.4 | :x: | :x: | :heavy_check_mark: | :x: | -| tallman5 | [Z Locks](./tallman5/z-locks/) | Helping hands curing v2.4 build, replaces long zip ties. | :x: | :x: | :heavy_check_mark: | :x: | :x: | -| tameike | [Din Rail SKR 90 deg](./tameike/DIN_Rail_SKR_1.3_90deg) | SKR V1.3 bracket turned 90 degrees | :x: | :grey_question: | :heavy_check_mark: |:x:| -| | [Din Rail 2020 Holder](./tameike/DIN_Rail_2020_holder) | Attaching DIN Rails to 2020 | :x: | :grey_question: | :heavy_check_mark: |:x:| -| | [TacoRaven Mounting Frame](./tameike/V0_TR_Mounting_Frame) | TR V0 mount | :heavy_check_mark: | :x: | :x: |:x:| -| | [Jetpack V0 base](./tameike/Jetpack_V0)| Attach Jetpack to V0 frame | :heavy_check_mark: |:x: |:x: |:x:| -| tayto-chip | [V2.4 Skirt Switch Mod](./tayto-chip/skirt_switch_mod) | Add a ON/OFF Switch to side or front skirts| :x: | :x: | :heavy_check_mark: |:x:| -|teookie|[AB dial indicator mount](./teookie/AB_dial_indicator_mount)|Mount for attaching standard dial indicators to AB|:x:|:heavy_check_mark:|:heavy_check_mark:|:heavy_check_mark:| -| | [SKR Brace](./teookie/skr_brace)|Rigidize and stabilize SKR 1.4 mounts|:x:|:x:|:heavy_check_mark:|:x:| -| th0mpy | [BEEFY Din Clips](./th0mpy/beefy-din) | Two piece BEEFY Din Clips, holds stronger | :grey_question: | :grey_question: | :heavy_check_mark: | :grey_question: | :grey_question: | -| TheSquiffy | [V0 Belts holder](./TheSquiffy/V0_Belts_holder) | V0 Belts Holder | :heavy_check_mark: | :x: | :x: | :x: | :x: | -| TiagoBarata |[Logitech C270 Mount](./TiagoBarata/Logitech_C270_Mount)| Logitech C270 Top Center Mount |:x:|:x:|:heavy_check_mark:|:x:|:x:| -|Tircown| [Display mount 5"](./Tircown/Display_mount_5inch) | Tiltable mount for a 5" tactile display | :x: | :x: | :heavy_check_mark: | :x: | -| | [Raspberry in plug panel](./Tircown/Raspberry_plug_panel) | Raspberry mount vertically in the plug panel, allow easy access to ports | :x: | :x: | :heavy_check_mark: | :x: | -| | [DIN mount RS-15-5 PSU](./Tircown/DIN_mount_RS-15-5) | A DIN mount for the RS-15-5 | :grey_question: | :grey_question: | :heavy_check_mark: | :grey_question: | -| | [V0.1 Skirt buttons](./Tircown/V01_skirt_buttons) | Buttons for V0.1 spec skirts | :heavy_check_mark: | :x: | :x: | :x: | :x: | -| togi | [Exhaust housing side fitting](./togi/exhaust_housing_side_fitting) | Moves the exhaust housing bowden fitting 90 degrees to allow the printer to stand closer to a wall | :x: | :x: | :heavy_check_mark: |:x:| -| top_gun_de | [mount_for_umbilical](./top_gun_de/mount_for_umbilical) | Umbilical guide that goes on the chain anchor | :x: | :grey_question: | :heavy_check_mark: | :x: | :grey_question: | -| Triano | [Ender 3 Pro or V2 to Switchwire Mod](./Triano/Ender_3Pro_Switchwire) | Convesion of an Ender 3 Pro or V2 to a Switchwire | :x: | :x: | :x: | :heavy_check_mark: | -| UltraWaffles | [Ender 3 to SW conversion](./Ultrawaffles/Ender_3_to_SW) | A conversion mod for the ender 3 to switchwire. Designed to allow for enclosure and uses original ender 3 motors and switches| :x: | :x: | :x: | :heavy_check_mark: | -| VinnyCordeiro | [RGB LED grid for Stealthburner](./VinnyCordeiro/RGB_LED_grid_for_SB) | A small RGB LED grid for Stealthburner's logo | :x: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: | -| warriorofwire | [Slenderfan for Afterburner](./warriorofwire/slenderfan) | Lighter, quieter, smaller Afterburner | :x: | :x: | :heavy_check_mark: |:x:| -| Weaslus | [Electronics Bay and Enclosure Seperator](./Weaslus/Electronics-Bay-Seperator) | Better enclose chamber and keep heat from electronics | :heavy_check_mark: | :x: | :x: |:x:| -| whoppingpochard | [Extrusion Backers](./whoppingpochard/extrusion_backers) | Laser-cut metal pieces to counteract bimetallic frame warping | :x: | :grey_question: | :heavy_check_mark: |:x:| -| Wile.e | [Deck Panel Support Clips](./wile-e1/Deck_Panel_Support_Clips) | Clips to help support lower deck panels to prevent (or fix) warping: | :grey_question: | :heavy_check_mark: | :heavy_check_mark: |:grey_question:| -| | [Stealthburner + CW1 + PCB Cover](./wile-e1/Stealthburner_CW1_PCB_Cover) | Low-poly for Stealthburner + CW1 + PCB installations: | :x: | :heavy_check_mark: | :heavy_check_mark: |:heavy_check_mark:|:grey_question:| -| wrez | [V0 Alternate IEC 320 C14 Power Inlet Housing](./wrez/astrodyne-inlet) | Drop in replacement for alternate-source power inlet if spec inlet is back-ordered | :heavy_check_mark: | :x: | :x: | :x: | -| xbst_ | [PCB LED Holder](./xbst_/LED_Holder)| Very simple mount for some (?) PCB LED Bars | :x: |:heavy_check_mark: |:heavy_check_mark: |:x:| -| | [DIN Mount Omron Relay](./xbst_/Omron_DIN_Mount)| A simple DIN rail mount for the BOM Relay | :x: | :heavy_check_mark: |:heavy_check_mark: |:x:| -| | [DIN Mount Pi 4x Relay Board](./xbst_/Relay_DIN_Mount)| A simple DIN rail mount for the 4 channel relay board for Raspberry Pi | :x: | :heavy_check_mark: |:heavy_check_mark: |:x:| -| | [DIN Mount Max31865](./xbst_/Max31865_DIN_Mount)| A simple DIN rail mount for the Adafruit (or SAME SIZE clone) MAX31865 PT100 Board. | :x: | :heavy_check_mark: |:heavy_check_mark: |:x:| -| | [Car Hood Style Bed Hinge](./xbst_/Bed_Hinge)| A way of reaching electronics from the top by having a "car hood" style hinge for the heatbed, and rotated electronics mounts. | :x: | :x: |:heavy_check_mark: |:x:| -| | [Flat V2.4 Skirts](./xbst_/Flat_Skirts) | Flat V2.4 Skirts so a panel without cutouts can be used | :x: | :x: |:heavy_check_mark: |:x:| -| | [V2.4 Fanless Middle Skirt](./xbst_/V2.4_Fanless_Middle_Skirt)| A Fanless alternative middle side skirt | :x: | :x: |:heavy_check_mark: |:x:| -| | [Duct Mount](./xbst_/Duct_Mount) | 100mm/4" ducting mount for ventilation. Also supports umbilical cord and has 3 orientations for bowden adapter. | :x: | :x: |:heavy_check_mark: |:x:| -| | [V2.4 Skirt Buttons](./xbst_/V2.4_Skirt_Buttons) | Skirt mod for custom Gcode macro buttons |:x: |:x: |:heavy_check_mark: | :x: | -| | [HOYMK SSR Mount](./xbst_/HOYMK_SSR_Mount) | Mount for Chinese HOYMK SSR | :heavy_check_mark: | :x: | :x: |:x:| -| | [ADXL345 V0 Mount](./xbst_/ADXL345_V0_Mount) | V0 Mount for a ADXL345 module | :heavy_check_mark: |:x: |:x: |:x:| -| | [Easy Access Rear Panels](./xbst_/Easy_Access_Rear_Panels_v0) | New rear panels designed to expose the extruder for easy filament swapping | :heavy_check_mark: | :x: |:x: |:x:| -| | [Hat LED Mount](./xbst_/Hat_LED_Mount) | Top Hat LED module mount | :heavy_check_mark: |:x: |:x: |:x:| -| | [ZipClip V0](./xbst_/ZipClip_v0) | Very simple ziptie mount for v0 1515 extrusions | :heavy_check_mark: |:x: |:x: |:x:| -| | [Screwed Front Door Hinge](./xbst_/V0_Screw_Front_Hinge_Mod)| Mod to screw the front door panel (instead of VHB) | :heavy_check_mark: | :x: | :x: |:x:| -| | [V0 Buttons & OLED Mount](./xbst_/V0_Skirt_Buttons)| Mod to mount custom Gcode macro buttons & Waveshare 1.3" OLED display | :heavy_check_mark: | :x: | :x: | :x: | -| | [Mobius 4 (M4) V0 Mod](./xbst_/V0_M4_Mod)| Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder mounts | :heavy_check_mark: | :x: | :x: | :x: | -| | [V0 Electronics Cover](./xbst_/V0_Electronic_Panel)| A printed cover for v0 electronics. Requires larger printer to print. | :heavy_check_mark: | :x: | :x: | :x: | -| | [V0 PiCam Mount](./xbst_/V0_Picam)| A Raspberry Pi Camera Mount For V0 | :heavy_check_mark: | :x: | :x: | :x: | -| | [DuetZero](./xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | :heavy_check_mark: |:heavy_check_mark: |:heavy_check_mark: |:x:| -| Xceled | [Single Panel Magnet Mount](./xceled/Single_Panel_Magnet_Mount)| Mount your front panel using only magnets | :x: |:grey_question: |:heavy_check_mark: |:x:| -| Yenda | [SW More Robust XZ Belt Paths](./yenda/vsw_more_robust_belt_paths)| Small mods to belt routing components to ensure a better/more robust alignment | :x: | :x: | :x: | :heavy_check_mark: | :x: | -| Yeri | [V0 Magnetic Panels](./yeri/V0_Magnetic_Panels)| Mount V0 panels with magnets, removes need for hinges and lets you easily detach sides for access | :heavy_check_mark: | :x: | :x: | :x: | -| | [V1 3Z](./yeri/V1_3Z)| 3Z mod for V1 | :x: | :heavy_check_mark: | :x: | :x: | -| Zen3D | [V0 Handle](./Zen3D/V0_Handle)| Voron0 Handle for 3mm panels | :heavy_check_mark: |:x: |:x: |:x:| -| | [V0 MidPanel HexPattern](./Zen3D/V0_MidPanel_HexPattern)| Voron0 MidPanel with Hex pattern and Wire cover | :heavy_check_mark: |:x: |:x: |:x:| -| | [V0 Skirt set](./Zen3D/V0_Skirt)| SSR, PowerSwitch, Adxl, Nameplate and color change printing | :heavy_check_mark: |:x: |:x: |:x:|:x: | -| | [V0 1515 T-nut](./Zen3D/V0_1515_T-nut)| M3 square and hex nuts for Voron0 1515 frame | :heavy_check_mark: |:x: |:x: |:x:| -| zruncho | [V0 No-Drop Nuts](./zruncho/V0_No_Drop_Nuts) | Voron0 nut inserts which auto-align (LDO frames only) | :heavy_check_mark: | :x: | :x: | :x: | -| ZZP8202 | [Pull-out electrical store](./ZZP8202/Pull-out_electrical_store) | Voron 2.4 Pull-out electrical store（350mm only） | :x: | :x: | :heavy_check_mark: | :x: | :x: | +| Creator | Mod title | Description | Printer compatibility | +| --- | --- | --- | --- | +| 1-0-R | [V2.4 handle](1-0-R/handle) | Handle for Voron 2.4 | V2.4 | +| 120decibell | [Side entry exhaust housing](120decibell/exhaust_housing_side_entry) | Exhaust housing with dual cover screws and single or dual side... | V1.8, V2.4, VT | +| | [Huvud Chain Mount](120decibell/huvud_chain_mount) | Huvud rear mount for Clockwork or LGX that supports a cable chain. | V1.8, VT | +| 3dpandme | [FANnypack zero](3dpandme/Fannypack_zero) | Electronics cooling solution for Voron Zero | V0.2, VSW, VT | +| | [Thermistor holder zero](3dpandme/Thermistor_holder_zero) | Extended thermistor holder for Voron Zero | V0.2, VSW, VT | +| 3vilson | [V0.1_Skirt_Holes](3vilson/V0.1_Skirt_Holes) | Skirt with Access Holes from the bottom | V0.2 | +| | [V0.1_Skirt_Inlet](3vilson/V0.1_Skirt_Inlet) | Skirt with C14 inlet + New feet to screw into | V0.2 | +| 42bios | [LED mount](42bios/LED_mount) | AngryLED - LED-mount for Lumentech LT3 profiles. | V2.4 | +| | [Corner panel clip w. cable](42bios/corner_panel_clip_cable) | Corner panel clip with an internal cable path. | V2.4 | +| | [Exhaust filter housing - side...](42bios/exhaust_filter_housing_side) | Exhaust filter housing with the G1-8 "thread on the side. | V2.4 | +| | [relay mount](42bios/relay_mount) | relay-mount for 2x 2 channel relay modules. | V2.4 | +| Akio | [Hidden cable routing z belt cover](Akio/cable_routing_z_belt_cover) | Z belt covers that allow hidden cable routing. | V2.4 | +| AlexanderT-Moss | [270 Clamping Hinges](AlexanderT-Moss/270-Clamping-Hinges) | Simple 270 degree hinges that clamp to the front panels instead of... | V2.4 | +| Andre | [Mini Afterburner ADXL345 Mount](Andre/Mini_Afterburner_ADXL345_Mount) | Mount for an AXDL345 on the Mini Afterburner | V0.2 | +| | [Mini Afterburner Strain Relief](Andre/Mini_Afterburner_Strain_Relief) | A replacement strain relief for the Mini Afterburner toolhead | V0.2 | +| | [Revo Nozzle Skirt](Andre/Revo_Nozzle_Skirt_Trident) | A Revo nozzle box hidden in a Trident skirt. | VT | +| | [V0 Neopixel Front Bed Mount](Andre/V0_Neopixel_Front_Bed_Mount) | A replacement Front Bed Mount with room for a neopixel or dotstar... | V0.2 | +| Backenfutter | [Mount for Electreeks Camera](Backenfutter/Mount_for_Electreeks_Camera) | This Mod is a simple "One Piece" mount for the popular Electreeks... | V2.4 | +| Badnoob | [AB-BN Afterburner mod (5015)](Badnoob/AB-BN) | Improved Afterburner with 5015 fan | V1.8, V2.4, VSW, VT | +| | [AB-BN for Stock Afterburner (4020)](Badnoob/ABBN_for_Stock) | Improved Dragon and Rapido toolhead for stock Afterburner with 4020... | V1.8, V2.4, VSW, VT | +| | [Precision AB Drive](Badnoob/Precision_AB_Drive) | Changes the gearing for the AB drives to improve both resolution... | V2.4 | +| | [Rail Alignment](Badnoob/Rail_Alignment) | Tools and procedure to properly align the rails in 2.4 and Afterburner | V2.4 | +| Baltojikale | [LoudOwl aka Stabby](Baltojikale/LoudOwl_aka_Stabby) | Alternative dual 5015 part cooling fan toolhead for Afterburner | V1.8, V2.4, VSW | +| BladeScraper-Designs | [CornerPanel_SpoolHolder](BladeScraper-Designs/CornerPanel_SpoolHolder) | A better supported Spool Holder that mounts to a modified corner... | V0.2 | +| | [Horizontal Spool Holder](BladeScraper-Designs/Horizontal-Spool-Holder) | Based on the stock holder but mounts to the horizontal extrusions. | V2.4 | +| | [Microswitch Pod With Connector](BladeScraper-Designs/Microswitch_Pod_With_Conector) | Microswitch pod with JST-XH 4-pin connector | V2.4 | +| Blamm | [LRS-100 DIN mount](Blamm/lrs-100) | DIN rail mount for an extra LRS-100 Power Supply | V1.8, V2.4, VT | +| BlueBear | [Deck Panel Backpack](BlueBear/Deck_Panel_Backpack) | A mounting alternative if you don't want to drill your deck panel | V0.2 | +| | [Clippable Wago 221 Mounts](BlueBear/Wago_221_mount) | Mounts for Wago 221 to screw or clip-in on 1515 extrusions | V0.2 | +| | [Ziptie Mount](BlueBear/Ziptie_Mount) | Clippable Ziptie hooks for 1515 extrusions | V0.2 | +| Boingomw | [Wago mount](Boingomw/Wago_mount) | Smaller 5 port Wago mount that fits parallel to the support rails | V2.4 | +| Bondtech | [Mini-After-LGX-Lite](Bondtech/Mini-After-LGX-Lite) | LGX Lite Toolhead Setup For Voron V0.1. | V0.2 | +| ByteChild | [2-Channel Relay DIN Rail Bracket](ByteChild/2_Channel_Relay_DIN_Rail_Bracket) | DIN Rail mounting bracket for an 2-Channel-Relay | V2.4 | +| | [ESP32 DIN Rail Bracket](ByteChild/ESP32_DIN_Rail_Bracket) | DIN rail mounting bracket for an ESP32 | V2.4 | +| CannedBass | [PITFT50 45-degree mount](CannedBass/PITFT50_45_degree_mount) | Mount that puts the screen at a 45-degree angle for more vertical... | V2.4, VT | +| | [Trident Bed Fans](CannedBass/Trident_Bed_Fans) | Bed fans for Trident | VT | +| Ch4rlesB | [V0 Handles Slim](Ch4rlesB/V0_Handles_Slim) | Simple and slim handles for the V0 | V0.2 | +| Chaoticlab | [Tool_free_tensioner](Chaoticlab/Tool_free_tensioner) | Tool-free tensioner for Z-Axis | V2.4 | +| ChenTheDesignMaker | [Z Belt Clip](ChenTheDesignMaker/Z_Belt_Clip) | Simple clip to keep extra Z belts clean and away from panels | V2.4 | +| D4rkCelerity | [Raspberry Pi Zero Bracket](D4rkCelerity/Raspberry_Pi_Zero_Bracket) | Modified version of Trident RPi bracket to fit the smaller RPi Zero | V0.2, V1.8, V2.4, VT | +| DC67 | [Plug Panel Mod for Schaffner...](DC67/plug_panel_schaffner) | A modified plug panel for the Power Entry Connector Schaffner... | V2.4 | +| DaGlo | [V0.1 Duet 2 Wifi mounting brackets](DaGlo/Voron_V0_Duet_2_WiFi_Mounting_Brackets) | Voron 0.1 Mounting brackets with/without RPi 4 | V0.2 | +| | [Voron V0 Mean Well power supply...](DaGlo/Voron_V0_MW_PS_Bracket) | Voron V0 Mean Well power supply bracket (Funssor Kit) | V0.2 | +| | [Voron V0 SSR Mount](DaGlo/Voron_V0_SSR_Mount) | Voron V0 SSR Mount for the bottom | V0.2 | +| DaGrooch13 | [Tophat Exhaust Filter V0](DaGrooch13/Tophat_Exhaust_Filter) | Activated charcoal exhaust filter with HEPA that replaces the rear... | V0.2 | +| DaStivi | [The Cephalopod limb (BTT Octopus...](DaStivi/the_Cephalopods_limb) | An alternative Din rail mount for BTT Octopus (PRO) boards | V1.8, V2.4, VSW, VT | +| Dan88 | [V0 one-part Skirts](Dan88/V0skirt) | One part Skirts for the V0 | V0.2 | +| Daten | [Revo hotend skirt case](Daten/Voron_2.4_Revo_Nozzle_Holder) | A skirt case for the Revo hotends to reside R1 and R2 | V2.4 | +| DerekBackus | [LED Strip Holder](DerekBackus/LED_Holder) | Simple bracket to mount an LED strip | | +| | [Trident Right Skirt Switch](DerekBackus/Right_Skirt_Switch) | Moves power switch to right front skirt on the Trident | | +| Derpimus | [V0.1 Block Handle](Derpimus/Block_handle_v0.1) | V0.1 Block Style Handle | V0.2 | +| DorjeDorf | [Duet 3 3HC Din Bracket](DorjeDorf/Duet_3_3HC_Din_Bracket) | V2.4 Duet 3 3HC Din Bracket | V2.4 | +| | [Duet 3 6HC Din Bracket](DorjeDorf/Duet_3_6HC_Din_Bracket) | V2.4 Duet 3 6HC Din Bracket | V2.4 | +| Dr-Info | [Corner Cable Cover with Drop Holes](Dr-Info/corner_cable_cover_with_drop_down_holes) | Corner cable cover around Z-idler with drop holes near z frame and... | V2.4 | +| DrGhetto | [Ghetto Panels](DrGhetto/GhettoPanels) | Printed panels for the Voron Zero | V0.2 | +| ElPoPo | [Removable Doors](ElPoPo/RemovableDoors) | New hinge to easily remove the door and have a wide opening V2.x | V2.4 | +| Electroleon | [U2C Mounting](Electroleon/U2C_Mounting) | Bigtreetech U2C CAN Interface mounting bracket | V0.2, V1.8, V2.4, VT | +| Ellis | [15x15 Drag Chain End](Ellis/15x15_Drag_Chain_End) | 15x15 drag chain end piece | V2.4 | +| | [Badge Retractor Mount](Ellis/Badge_Retractor_Mount) | Extrusion mount for badge retractor to keep bowden tube out of the... | V2.4 | +| | [Bed Fans](Ellis/Bed_Fans) | Bed fan control macros and 5015 bed fan mounts | V2.4 | +| | [Short Z Joints](Ellis/Short_Z_Joints) | Shorter Z joints for the v2.4 | V2.4 | +| | [Single MGN9H Carriage](Ellis/Single_MGN9H_Carriage) | Single MGN9H toolhead carriage with toolhead x endstop support (for... | V1.8, V2.4 | +| Empusas | [Mounts for BTT Filament Motion...](Empusas/BTT_Filament_Motion_Sensor_Mount) | Mounts for Big Tree Tech Smart Filament Motion Sensor | V0.2, V1.8, V2.4, VSW | +| | [Power Skirt 2.x FN284-10-06](Empusas/PowerSkirt_FN284-10-06) | Power Skirt for Schaffner FN284-10-06 V2.x | V2.4 | +| | [Mounts for Terminal Blocks NC933...](Empusas/Terminal_Blocks_NC933_SPL-62) | Mounts for Terminal Blocks NC933 and SPL-62 from AliExpress | V2.4 | +| Fiction | [C270 mount](Fiction/C270_mount) | Logitech C270 webcam front-centre mount | V2.4, VT | +| | [Crossrail](Fiction/Crossrail) | Across-the-rails LRS-200-24 or RSP-200-24 mount using DRP-03 brackets | V2.4, VT | +| | [Exhaust_cover](Fiction/Exhaust_cover) | Cover for exhaust cutout in back panel | V2.4, VT | +| | [Exhaust_cover_SFS](Fiction/Exhaust_cover_SFS) | Exhaust cover and BTT Smart Filament Sensor mount | V2.4, VT | +| | [LGX Lite toolhead PCB mount](Fiction/LGX_Lite_toolhead_PCB_mount) | Mount for Hartk's toolhead PCB(s) for LGX Lite | V1.8, V2.4, VSW, VT | +| FreeformFez | [V1.8 Filtered Power Inlet](FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | V1.8 | +| GSL12 | [Pocketwatch Nema 17](GSL12/pocketwatch_nema17) | Extruder like Pocketwatch, but with Nema17 instead of Nema14. Maybe... | | +| GadgetAngel | [Bed Support Extrusions Alignment...](GadgetAngel/Bed_Support_Alignment_Tools) | The bed support alignment tools will assist in helping align the... | V2.4 | +| | [Cricut Voron Logos](GadgetAngel/Cricut_Voron_Logos) | For any cutting machines or machines that rely on vector graphics... | V0.2, V2.4, VSW, VT | +| Galvanic | [Bowden Tube Guide](Galvanic/Bowden_Tube_Guide) | Bowden tube guide and CANBUS wire support | V1.8, V2.4, VT | +| GiulianoM | [Fly F407ZG Mount](GiulianoM/FlyF407ZG) | Mount for the Fly F407ZG: https://github.com/FLYmaker/FLYF407ZG | V2.4 | +| Gizzle | [Ender 3 and Ender 3 Pro...](Gizzle/ender-3_(pro)_switchwire) | Mod for the Ender 3 and Ender 3 Pro, which adapts the kinematics... | VSW | +| Hobson318 | [Belt Tension Wrench](Hobson318/Belt_Tension_Wrench) | Wrench for easier turning of the belt tension knobs on V0.1 | V0.2 | +| | [Klipper Expander Mount](Hobson318/Klipper_Expander_Mount) | Mounting brackets for the klipper expander using vhb tape or... | V0.2, V1.8, V2.4, VSW, VT | +| Iakabos | [c920 Mount](Iakabos/C920_mount) | Slim mount for logitech c920 webcam | V1.8, V2.4 | +| | [V0 beltchains](Iakabos/V0_beltchain) | Modified beltchain parts for V0 Z cables | V0.2 | +| JD | [V2.4 Filament runout sensor](JD/RefillPlease) | Replace the 2.4 stock bowden tube holder and add a filament runout... | V1.8, V2.4, VT | +| JJFX | [V2.4 CR Touch Snap Mount](JJFX/CRTouch_Snap_Mount) | Mount to replace v2.4 (MGN9) probe with a Creality CR Touch | V2.4 | +| JNP | [Back Door](JNP/Back-Door) | Door for easy hardware access | V0.2 | +| | [Deck Panel](JNP/Deck_Panel_Rear) | Covers the hotbed cables | V0.2 | +| | [Drawer](JNP/Drawer) | Drawer in four different versions | V0.2 | +| | [Front Door](JNP/Front-Door) | Door in a frame | V0.2 | +| | [Hepa Filter](JNP/HEPA-Filter) | Filter case with fan´s | V0.2 | +| | [Mid Panel](JNP/Mid-Panel) | Panel for SKR1.4/1.4 or SKR E3 mini mount | V0.2 | +| | [Neopixel Case](JNP/Neopixel-Y_Rails) | mounting for Neopixel strip with 8 LED´s | V0.2 | +| | [Side Panels](JNP/Side-Panels) | Panels with intergrated hinge | V0.2 | +| Jasrags | [Feed slot with filament pass-...](Jasrags/sw_fee_slot_filament_passthrough) | A feed slot with a filament pass-through | VSW | +| JeremyRuhland | [V2.4 Plug Panel Generic Combo](JeremyRuhland/V2.4_Plug_Panel_Generic_Combo) | Skirt power panel for generic amazon plug/switch/fuse combo module,... | V2.4 | +| Jon | [1515 LED Mount](Jon/1515_led_mount) | Snap in 1515 Led mount for WS2812B | V0.2 | +| | [adxl345 skirt keystone](Jon/adxl345_skirt_keystone) | Skirt keystone for ADXL345 using Microfit 3.0 | V2.4 | +| JosAr | [Klicky Probe](JosAr/Klicky-Probe) | Microswitch based inductive probe replacement | V0.2, V1.8, V2.4, VT | +| KenadyDwag44 | [Switchwire Lightbar](KenadyDwag44/sw_lightbar) | A LED lightbar for switchwire | VSW | +| KevinAkaSam | [VEFACH](KevinAkaSam/VEFACH) | Voron Exhaust Filter Inserts for Activated Coal + Hepa | V2.4, VT | +| KiloQubit | [V0 Reverse Bowden Mount](KiloQubit/V0_reverse_bowden_mount) | V0 reverse bowden mount | V0.2 | +| | [V2.4 Z Chain Mounts for 3 Hole...](KiloQubit/VORON_2.4_Z_Chain_3_Hole_Mounts) | Z chain mounts for 3 hole generic chain | V2.4 | +| | [Trident Schurter Inlet Skirt](KiloQubit/trident_schurter_power_inlet) | Trident inlet skirt for mounting a Schurter DD11.0124 or similar inlet | VT | +| Koios | [6mm Tempered Glass Mod](Koios/6mm_Glass) | Lock levers and rests for 6mm Tempered glass panels | V2.4 | +| | [C920 Low Profile Mount](Koios/C920_Mount) | Low profile mount for a C920 Webcam | V2.4 | +| | [LED Bar Mounts](Koios/LED_Mounts) | Low profile mount for led bar lights | V2.4 | +| | [V0 C920 Tophat Mount](Koios/V0_C920_Tophat_Mount) | Mounting bracket for a Logitech C920 on the tophat | V0.2 | +| Kosh42EFG | [Kirigami bed front](Kosh42EFG/kirigami_bed_front) | Printed bed front for kirigami folded metal bed mount with Voron logo. | V0.2 | +| Kruppes | [Encosed Bottom](Kruppes/Closed_Bottom) | Modified printed parts and panel to fully enclose V0. | V0.2 | +| | [V0 Printed Deck with inserts](Kruppes/Deck_Panel_inserts_logo) | Electronics Deck Panel using brass heat inserts. Optional with... | V0.2 | +| | [Belt Tension Meter](Kruppes/Tension_Meter) | Print in place tension meter to easily tighten multiple belts to... | V0.2, V1.8, V2.4, VSW | +| Kyleisah | [CableGator Cable Comb](Kyleisah/CableGator) | A cable comb for simplifying and tidying wire harnesses for... | V0.2, V1.8, V2.4, VSW, VT | +| LJ | [Scrubby](LJ/Scrubby) | Easy to use filament dust filter | V0.2, V1.8, V2.4, VSW, VT | +| Le0n | [Magnetic panels with Magnet Inserts](Le0n/Magnetic_Panels_with_Magnet_Inserts) | Magnetic panel mounts with magnets inserted into frame slots. | V1.8, V2.4, VT | +| LoCoCNC | [3mm Top Hat Panels Clips](LoCoCNC/3mm_tophat_panel_parts) | Required to use the 3mm (1/8") thick top hat panels for V0.1 | V0.2 | +| | [MGN7H Shims](LoCoCNC/MGN7H_Shims) | Shims for making bearing cartridges coplanar | V0.2 | +| | [Mosquito PTFE 15mm Tube Cutting Jig](LoCoCNC/Mosquito_PTFE_Cutting_Jig) | Tool to precicely cut 15mm PTFE Tube | V0.2 | +| | [Strain Relief w/ 10 Pin Microfit](LoCoCNC/Strain_Relief_w_Microfit) | Strain Relief with 10 pin Microfit connector | V0.2 | +| | [SSR Mounting Strap](LoCoCNC/ssr_strap) | Mounting Strap for SSR on 1515 Extrusions | V0.2 | +| | [V2.4 Bed Wiring Grommet](LoCoCNC/wire_grommets) | Safely capture your bed wires thru the bottom panel | V2.4 | +| LoganFraser | [ComboInlet](LoganFraser/ComboInlet) | Skirt pieces for Trident, 2.4 and 2.4r2 for combo inlets in 2 sizes. | V2.4, VT | +| | [HorseshoeSpoolHolder](LoganFraser/HorseshoeSpoolHolder) | Horseshoe Spool Holder - mounts internally for Trident, or... | V0.2, V1.8, V2.4, VT | +| | [PiPlate](LoganFraser/PiPlate) | PiPlate - Raspberry Pi3,4 mounting plate and Skirt Mod for... | V2.4, VT | +| | [Trident Inverted Electronics](LoganFraser/TridentInvertedElectronics) | Flip the Trident electronics bay for top access. | VT | +| | [WagoMounts](LoganFraser/WagoMounts) | Wago Mounts for Din Rail or 2020 Extrusion mounting. | V2.4, VSW, VT | +| Long | [Mantis Dual 5015 Toolhead](Long/Mantis_Dual_5015) | MGN12 Dual 5015 Toolhead for 2.4 & 1.8 | V1.8, V2.4 | +| Lukas | [SSD1306 Case Front Cover](Lukas/SSD1306_Case_Front_Cover) | SSD1306 Mount replacement for Mini12864 | V2.4, VT | +| MCMBen | [Voron0 Block & Tackle Z Belt](MCMBen/Voron0_Block_and_Tackle_Z_Belt) | A block & tackle belted Z solution using NEMA14. Ratios from 5:1 to... | V0.2 | +| MSA | [Belt tension helper](MSA/V0-Belt-tension-helper) | Belt tension helper for V0.1 | V0.2 | +| MSiemons | [Tophat Hinge V0](MSiemons/TophatHingeV0.1) | Simple hinge for V0 Tophat | V0.2 | +| Mac10goesBRRRT | [PiTFT Mount](Mac10goesBRRRT/BTT_PiTFT) | Mount for the BTT PiTFT Touchscreen | V2.4, VT | +| Majarspeed | [Hartk board mount galileo](Majarspeed/Hartk_Mount_Galileo) | It hangs stuff on your tool | V2.4 | +| MakeALeft | [Switchwire Clean Center Grill](MakeALeft/Switchwire_Front_Grill) | Removed magnet holders on center panel for cleaner look | | +| MasturMynd | [Stealth Zero](MasturMynd/Stealth_Zero) | A low poly gantry with front tensioners and optional front mounted... | V0.2 | +| MathematicalPotato | [V0.1 Belted Z Drive](MathematicalPotato/v0.1_belted_z_drive) | Conversion to a belted Z axis for the V0.1 adapted from... | V0.2 | +| Maverick | [MiniSB_LGXL](Maverick/MiniSB_LGX_Lite) | A Bondtech LGX Lite variant of the MiniSB | V0.2, V1.8, V2.4, VSW, VT | +| | [MiniSB_Rapido](Maverick/MiniSB_Rapido) | Modified MiniSB to use a Rapido hotend | V0.2, V1.8, V2.4, VSW, VT | +| | [MiniSB_Sharkfin](Maverick/MiniSB_Sharkfin) | Modified MiniSB to use a Sharkfin Extruder | V0.2, V1.8, V2.4, VSW, VT | +| | [V0.2 Handles](Maverick/V0.2_Handles) | Add handles to the extrusion tophat | V0.2 | +| | [V0.2 Stealth Skirts](Maverick/V0.2_Stealth_Skirts) | Juiced up skirts for the V0.2 | V0.2 | +| Mckurt | [Switchwire Y Belt Tensioner](Mckurt/Switchwire_Y_Belt_Tensioner) | Switchwie Y axis Belt Tensioner | VSW | +| Mellow | [V0 Fly-Gemini](Mellow/V0_Fly-Gemini) | Fly-Gemini adapted model for V0 | V0.2 | +| MikesMods | [LGX mount for V0.1 with 2nd X rail](MikesMods/LGX_mount_for_V0.1_with_2nd_X_rail) | V0.1 mod for mounting Bondtech LGX extruder with addition of 2nd X... | V0.2 | +| Minsekt | [Rear Umbilical](Minsekt/Rear_Umbilical) | Rear Umbilical mounting solution including a relocated Y-Endstop | V2.4 | +| MrBean66 | [SKR Pro DIN Mount](MrBean66/SKR_PRO_Mount) | Simple mod to mount the SKR Pro board from BTT to a DIN rails. | V1.8, V2.4 | +| MrDespair | [MiniAB Pinda Probe Mount](MrDespair/MiniAB_Pinda) | Replacement MiniAB Cowling to add a mount for a Pinda style probe. | V0.2 | +| Mrgl-Mrgl | [LGX Lite Mount](Mrgl-Mrgl/LGX_Lite_Mount) | a mount for the LGX Lite | V1.8, V2.4, VT | +| Nashuar | [V0 Dragon Toolhead M2.5x8](Nashuar/V0_Dragon_ToolheadStockScrews) | This toolhead uses the stock M2.5 screw that came with the dragon... | V0.2 | +| Nomsplease | [60mm Shaft Jig](Nomsplease/60mm_Shaft_Jig) | Simple jig for cutting and grinding 60mm Z shafts | V2.4 | +| | [Duet Wifi Mount](Nomsplease/V0_Mods/duet_wifi_mount) | Duet wifi mount in pocketwatch location | V0.2 | +| | [LED Mounts](Nomsplease/V0_Mods/led_mounts) | Basic LED mounts for 10 and 12mm strips | V0.2 | +| | [Remixed Panel Mounts](Nomsplease/V0_Mods/panel_mounts) | Remixed rear bottom panel mounts with stop | V0.2 | +| | [Pi Cam/ZeroW Mount](Nomsplease/V0_Mods/pi_zero_camera_mount) | Mount for pi camera and ZeroW | V0.2 | +| | [Pocket Watch Rear Reolcation...](Nomsplease/V0_Mods/pocket_watch_rear_relocation) | Pocket watch rear reolcation bracket | V0.2 | +| Oakman | [BTT 24V UPS Metal DIN Mount](Oakman/BTT_24V_UPS_Metal_DIN_Mount) | Adapter to use a metal DIN mount for the BTT 24V UPS | V1.8, V2.4 | +| | [FYSETC Spider Metal DIN Mount](Oakman/FYSETC_Spider_Metal_DIN_Mount) | Use a metal DIN mount for your FYSETC Spider | V1.8, V2.4 | +| | [RPI Metal DIN Mount](Oakman/RPI_Metal_DIN_Mount) | Adapter for metal DIN mounting the Raspberry Pi | V1.8, V2.4 | +| OboMaker3D | [C17-EXT Filter HEPA Carbon](OboMaker3D/C17-EXT) | Replaces standard filter with new HEPA Crabon and 120mm fan V1.1 | V2.4, VSW, VT | +| | [C17-EXT-CARTRIDGE for C17-EXT...](OboMaker3D/C17-EXT-CARTRIDGE) | Alternative to a commercial cartridge for the C17-EXT filter | V2.4, VSW, VT | +| Phalanx | ["Other" Idlers Mod](Phalanx/Other-V2-Idlers) | Allow usage of wider toolheads on the V2 | V2.4 | +| Polar-Ted | [V0.1 Z nozzle endstop switch](Polar-Ted/V0.1_Its_Not_a_Sexbolt_switch) | Sexbolt style switch for V0 | V0.2 | +| | [V0.1 Two Piece Back Panel](Polar-Ted/V0_Two_Piece_Back_Panel) | Vented 2 piece back panel for V0 | V0.2 | +| Polared | [Power Inlet with Keystone Insert](Polared/Power_Inlet_w_Keystone_Insert) | Voron 0.1 Power inlet with keystone insert slot | V0.2 | +| Printopal | [Magnetic top panel](Printopal/Magnetic_top_panel) | Top panel with magnets allows for quick installation and removal | V1.8, V2.4 | +| PsychoShaft | [C92X_PsycHoShafts_Mount](PsychoShaft/C92X_PsycHoShafts_Mount) | 2020 Top profile 920 camera mount / 2 point axis pivot | V1.8, V2.4, VT | +| QuackProfit | [V0 Adafruit NeoPixel LED Mounts](QuackProfit/V0-Adafruit-Y_Rails) | Mount Adafruit PCB NeoPixel Sticks on the V0 Y-rail extrusions | V0.2 | +| Rhastlyn | [60mm Fan Cover](Rhastlyn/60mmFanCover) | A easy to install cover for spec 60mm fans originally designed for... | V2.4 | +| | [Wansview 1080p Camera Mount](Rhastlyn/WansviewCameraMount) | A camera mount that replaces the OEM part to allow the camera to be... | V2.4 | +| RockNLol | [RockNRoll](RockNLol/RockNRoll) | Rockers to roll the printer on its back for easier access to the... | V2.4 | +| ScramblerUSA | [Side Skirt Power Switch](ScramblerUSA/SideSkirtPowerSwitch) | Skirt-mounted rocker switch for easy access for Voron 2.4 | V2.4 | +| See1807 | [TopHat Exhaust and LED Light](See1807/Voron_V0_Exhaust_and_LED_Mod) | A mount for 10mm LED strips and Exhaust for Voron V0 | V0.2 | +| Shiftingtech | [Trident Dual Power Switch](Shiftingtech/Trident_dual_power_switch) | A replacement skirt, allowing 2 power switches | VT | +| ShinyPants | [OrangePi 3 LTS DIN Rail bracket](ShinyPants/Orange_Pi_3_LTS_DIN) | A DIN rail mount for OrangePi LTS 3 | V1.8, V2.4, VT | +| Shteeeeeve | [V0.1 LED Tophat](Shteeeeeve/V01-LED-Tophat) | V0.1 LED Tophat w/ 24V LED Lightstrip | V0.2 | +| Slidr | [PanzerBalls 2.4](Slidr/PanzerBalls2.4) | Squash Ball Feet for V2.4 | V2.4 | +| | [PanzerChain 2.4](Slidr/PanzerChain2.4) | Energychain for V2.4 | V2.4 | +| Spaghetti-Bolognese | [LCD Case Mod](Spaghetti-Bolognese/LCD_case_mod) | Improvements to the V2.4 mini12864 LCD case inc E-stop button cover | V2.4 | +| | [Simplified Z Drive Motor Mount](Spaghetti-Bolognese/Z_drive_motor_mount) | Z drive motor mount bracket mod to improve pulley to belt alignment | V2.4 | +| StvPtrsn | [Skirts for a 320mm Build](StvPtrsn/320mm_Build) | Skirts for a 320mm build | V2.4 | +| | [Keystone Jack for Filtered Mains...](StvPtrsn/Keystone_Jack_Filtered_Mains_Panel) | Add a keystone jack to your filtered mains plug panel | V2.4 | +| | [Parts_Jigs and Mods](StvPtrsn/Parts_Jigs_and_Mods) | Parts, Jigs and modifications I use for my builds | V0.2, V1.8, V2.4, VSW, VT | +| | [Side Fan Support, No Tape](StvPtrsn/Side_Fan_Support_No_Tape) | Mount the 60mm side fans and inserts without tape | V2.4 | +| Takuya | [WANSVIEW USB Camera Mount](Takuya/USBCameraMount) | WANSVIEW 1080p Camera Mount for Voron 2.4 | V2.4 | +| TheSquiffy | [V0 Belts holder](TheSquiffy/V0_Belts_holder) | V0 Belts Holder | V0.2 | +| TiagoBarata | [Logitech C270 Mount](TiagoBarata/Logitech_C270_Mount) | Logitech C270 Top Center Mount | V2.4 | +| Tircown | [DIN mount RS-15-5 PSU](Tircown/DIN_mount_RS-15-5) | A DIN mount for the RS-15-5 | V2.4 | +| | [Display mount 5"](Tircown/Display_mount_5inch) | Tiltable mount for a 5" tactile display | V2.4 | +| | [Raspberry in plug panel](Tircown/Raspberry_plug_panel) | Raspberry mount vertically in the plug panel, allow easy access to... | V2.4 | +| | [V0.1 Skirt buttons](Tircown/V01_skirt_buttons) | Buttons for V0.1 spec skirts | V0.2 | +| Triano | [Ender 3 Pro or V2 to Switchwire Mod](Triano/Ender_3Pro_Switchwire) | Convesion of an Ender 3 Pro or V2 to a Switchwire | VSW | +| Ultrawaffles | [Ender 3 to SW conversion](Ultrawaffles/Ender_3_to_SW) | A conversion mod for the ender 3 to switchwire. Designed to allow... | VSW | +| VinnyCordeiro | [RGB LED grid for Stealthburner](VinnyCordeiro/RGB_LED_grid_for_SB) | A small RGB LED grid for Stealthburner's logo | V1.8, V2.4, VSW, VT | +| Weaslus | [Electronics Bay and Enclosure...](Weaslus/Electronics-Bay-Seperator) | Better enclose chamber and keep heat from electronics | V0.2 | +| ZZP8202 | [Pull-out electrical store](ZZP8202/Pull-out_electrical_store) | Voron 2.4 Pull-out electrical store（350mm only） | V2.4 | +| Zen3D | [V0 1515 T-nut](Zen3D/V0_1515_T-nut) | M3 square and hex nuts for Voron0 1515 frame | V0.2 | +| | [V0 Handle](Zen3D/V0_Handle) | Voron0 Handle for 3mm panels | V0.2 | +| | [V0 MidPanel HexPattern](Zen3D/V0_MidPanel_HexPattern) | Voron0 MidPanel with Hex pattern and Wire cover | V0.2 | +| | [V0 Skirt set](Zen3D/V0_Skirt) | SSR, PowerSwitch, Adxl, Nameplate and color change printing | V0.2 | +| aTinyShellScript | [RS PSU DIN Bracket](aTinyShellScript/RS_PSU_DIN_Brackets) | DIN brackets for MeanWell RS PSUs with 80mm spacing. | V2.4 | +| ademuri | [Lights, Camera, Voron](ademuri/Lights_Camera_Voron) | A mount for LED strips and Picam for the V0.1 | V0.2 | +| aeresov | [MeanWell UHP-xxx DIN mount](aeresov/MeanWell_UHP_DIN_mount) | A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount... | V2.4 | +| | [Raspberry Pi DIN mount](aeresov/Raspberry_Pi_DIN_mount) | A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or... | V2.4 | +| | [SKR 1.3/1.4 DIN mount](aeresov/SKR_DIN_mount) | A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or... | V2.4 | +| | [TL filament sensor bracket](aeresov/TL_filament_sensor_bracket) | A bracket for TL filament sensor to mount near stock spool holder. | V2.4 | +| | [cable tie DIN mount](aeresov/cable_tie_DIN_mount) | A bracket for cable ties to route cables across DIN rails. | V2.4 | +| al3ph | [Analog Timer Mount](al3ph/analog_timer_mount) | A skirt mount for analog timer | V0.2 | +| | [Filament Runout Sensor](al3ph/filament_runout) | A simple filament runout sensor | V0.2, V1.8, V2.4, VSW | +| | [LED Mount](al3ph/led_mount) | A mount for 10mm LED WS2812 strips | V0.2 | +| | [PL05 Sensor Mount](al3ph/pl05_mount) | A mount PL05 inductive sensor | V0.2 | +| alanho | [BTT PITFT50 v2 Mount](alanho/BTT_PITFT50_v2_Mount) | A mount for the BTT PITFT50 v2 Touch Display | V2.4 | +| albert | [IKEA Dioder Led Mount](albert/IKEA_Dioder_Led_Mount) | A mount for the IKEA Dioder LED strip | V2.4 | +| antoinecellerier | [DS18B20 Sensor Mount](antoinecellerier/ds18b20-sensor-mount) | DS18B20 temperature sensor mount | V0.2 | +| ardichoke | [V0 Long Thumb Nut](ardichoke/v0-long-thumb-nut) | Taller thumb nuts for V0 bed | V0.2 | +| arkeet | [Dial test indicator mount](arkeet/dti-mount) | A toolhead mount for a dial test indicator, where the tip is... | V1.8, V2.4 | +| | [Magnetic hotend fan cover](arkeet/magnet-fan-cover) | A replacement hotend fan cover, held with magnets instead of screws. | V1.8, V2.4, VSW | +| | [MGN12 X-axis](arkeet/mgn12) | Replaces the dual MGN9H rails with a single MGN12H. | V2.4 | +| | [V0 DC inlet](arkeet/v0-dc-inlet) | Skirt inlet for external 24V DC power supply. | V0.2 | +| baccula | [Revo Nozzle Holder for v2.4 350](baccula/revo_skirt_nozzle_holder) | A remix of Andre's design allowing for skirt storage of 4 E3D Revo... | V2.4 | +| beaugalbraith | [Nova Printhead](beaugalbraith/Nova_Printhead) | Use Nova Hotend with Afterburner | V2.4 | +| bobbleheed | [Filament Runout Sensor](bobbleheed/Filament_Runout) | Filament runout sensor that replaces the stock bowden retainer | V1.8, V2.4, VT | +| | [Magnetic Panels](bobbleheed/Magnetic_Panels) | Magnetic clips to allow for easy removal and installation of panels | V2.4 | +| btp | [Galileo chain mount (befenybay)](btp/Galileo_Switchwire_Chain_Mount) | Modified chain mount position to cater for difference with Galileo... | VSW | +| buzzdalf | [v1.8/2.4 Afterburner connector...](buzzdalf/connector_cover) | v1.8/2.4 Connector cover for 42STH20-1004AS | V1.8, V2.4 | +| | [Ender 3 Switchwire Taller Z Mod](buzzdalf/ender_switchwire_taller_z) | Taller Z Mod | VSW | +| | [Ender 3 Switchwire Y Tensioner Mod](buzzdalf/ytension) | Y Tension Mod | VSW | +| bythorsthunder | [MGN9 Backers Idlers](bythorsthunder/MGN9_Backers) | New idler uppers for MGN9 Extrusion backers | V2.4 | +| | [Stealthburner Rapido UHF](bythorsthunder/Stealthburner_Rapido_Uhf) | Stealthburner mod for Rapido UHF | V2.4, VSW, VT | +| chirpy | [V0.1 Nozzle Wiper](chirpy/NozzleWiper) | Servo powered nozzle wiper and purge bucket | V0.2 | +| | [Runout UnKlicky Sensor](chirpy/RunoutUnklicky) | Runout UnKlicky Sensor is a filament runout sensor with mounts for... | V0.2, V1.8, V2.4, VSW, VT | +| | [V0.1 Raised Tophat](chirpy/TipTophat) | Alternative Tophat design that uses stock panels and raises height... | V0.2 | +| chri.kai.in | [20x20mm Profile Covers](chri.kai.in/20x20mm_Profile_Covers) | Provide overlapping and flush slot covers for 20x20mm slot6... | V1.8, V2.4, VSW, VT | +| | [Angry CAM USB](chri.kai.in/Angry_CAM_USB) | Housing for small USB camera module, allowing mounting to gantry or... | V2.4 | +| | [Exhaust Adapter 100mm](chri.kai.in/Exhaust_Adapter_100mm) | Replace 60mm exhaust fan with 100mm ventilation system adapter | V1.8, V2.4, VT | +| chrisrgonzales | [270° Front Panel Hinge](chrisrgonzales/270_degree_hinge) | Hinges that have 270° of swivel, parametric CAD included | V2.4 | +| christophmueller | [Phaetus and Zodiac Dragonfly BMO...](christophmueller/Phaetus_Dragonfly_BMO_Afterburner) | Covers both the original Phaetus variant as well as the Zodiac one. | V1.8, V2.4, VSW | +| claytono | [Voron 2.4 Extrusion Jig](claytono/2.4-extrusion-jig) | A jig help align extrusions to get a properly square frame | V2.4 | +| | [Fysetc S6 V2 Mount](claytono/fysetc-s6-v2-mount) | DIN Mount for the Fysetc S6 V2 controller | V1.8, V2.4 | +| | [V0 Zip Tie Skirts](claytono/v0-zip-tie-skirts) | V0 skirts with small loops added along the top to allow zip tyiing... | V0.2 | +| clee | [Monster8 DIN Rail Mounts](clee/Monster8_heatsert_mount) | DIN mount for Makerbase Monster8 V1/V2 controller | V2.4, VT | +| cmrny | [V0.1 Motor Panel Modification](cmrny/v01_motor_panel_no_rub) | V0.1 Motor panel modification to keep umbilical and bowden tube... | V0.2 | +| conqueror433 | [Voron Parts Logo](conqueror433/Voron_Parts_Logo) | Voron Parts Logo for your back panels, 3D Print or Laser Cut | V2.4 | +| | [Voron V0.1 Parts Logo](conqueror433/Voron_V0.1_Parts_Logo) | Voron Parts Logo for your V0 deck panel | V0.2 | +| consibonsi | [Y-Mod SW 9mm](consibonsi/Y-Mod_SW_9mm) | 9mm Y belt mod for SW | VSW | +| csch0 | [SW Fan Mount No Tape](csch0/SW_FanMount_No_Tape) | 60x20 Fan Mount for SW without tape | VSW | +| d3nny | [Filtered Power Plug with...](d3nny/mains_plug_panel_for_RND_165-00057) | Filtered Power Plug for RND 165-00057 and CAT6-Plug | V2.4 | +| davidauvergne | [Center_cable_management_duct](davidauvergne/Center_cable_management_duct) | Mod for a centered cable management | | +| dePrintinator | [HEPA Exhaust](dePrintinator/HEPA_Filter_Exhaust) | HEPA filter chamber exhaust replacement. | V1.8, V2.4, VT | +| deepfriedheroin | [v0 Wago Bed Mounts](deepfriedheroin/v0_bed_wagos) | Easy to install Wago mounts for the v0 | V0.2 | +| | [v0 Power Wagos](deepfriedheroin/v0_power_wagos) | Easy to install Wago mounts for v0 mains | V0.2 | +| | [V2 Bed Wagos](deepfriedheroin/v2_bed_wagos) | Wire management for the v2 bed | V2.4 | +| doubletrouble | [V0 Skirt Mod](doubletrouble/V0_Skirt_Mod) | V0 Skirt Mod | V0.2 | +| eamars | [Stealthburner (RC1) Dragon...](eamars/stealthburner_crazy_dragon_toolhead) | The Stealthburner toolhead mount for Mellow Crazy, TriangleLab... | V1.8, V2.4, VSW, VT | +| eddie | [LED Bar Clip](eddie/LED_Bar_Clip) | Modular LED Clip for mounting LED Strip to 2020 Extrusions | V1.8, V2.4, VT | +| | [V1.8 12mm Z Mod](eddie/V1.8_12mm_Z_Mod) | Add V1.8 option for 12mm Z rods | V1.8 | +| edwardyeeks | [Tridentified V2.4 Power Inlet](edwardyeeks/Tridentified_V2.4_Power_Inlet) | Trident style side power inlet for V2.4 using Z Drive Motor... | V2.4 | +| elcrni | [Trident Internal Spool Holder](elcrni/Trident_Internal_Spool_Holder) | Internal spool holder for 300 and 350 Tridents. Supports full size... | VT | +| | [V.24/Trident Spool Holder](elcrni/V2.4-Trident-Spool-Holders) | Spool holder that mounts on top for "too close to the wall" printers | V1.8, V2.4, VT | +| evandepol | [Crydom GN Terminal Guard](evandepol/Crydom-GN-Guard) | A simple safety guard for the terminals on a Crydom GN SSR | V2.4 | +| | [Voron 2.4 cable clamps](evandepol/Voron2.4-Cable-clamps) | A set of 2020-mounted cable guards to organize and dress the wiring... | V2.4 | +| falo | [LGX Lite CAN Side Mount](falo/lgx_lite_side_can) | A side mounting for a CAN board (Huvud/SHT42) to the LGX Lite | V1.8, V2.4, VSW, VT | +| | [Magnetic Exhaust Grill Cover](falo/magnetic_grill_cover) | A magnetic cover to seal the filtered exhaust | V2.4 | +| | [Toolhead PCB to CAN Mount Adaptor](falo/toolhead_pcb_to_can) | A mount to enable side mounting of a CAN board (Huvud/SHT42) in... | V1.8, V2.4, VSW, VT | +| filotto78 | [6mm slot cover](filotto78/6mm_slot_cover) | Simple cover for extrusion with 6mm slot width | V2.4 | +| gamebofh | [Laser cut door panels](gamebofh/door-panels) | Files to allow you to create laser cut door panels with some... | VSW | +| gauravmm | [Crazy Mozzie HF toolhead SB+CW2](gauravmm/crazy_mozzie_cw2) | Toolhead for Crazy Mozzie HF, compatible with Stealthburner and... | V1.8, V2.4, VSW, VT | +| gen2eng | [Switchwire LED wire pass through](gen2eng/z_carriage_stop_pass_through) | Z Carriage Stop modification that makes pass through of wires for... | VSW | +| geoffreyyoung | [Dual Rail Installation Guide](geoffreyyoung/dual_rail_guide) | Rail installation guide that also works for the 2.4 dual rail... | V2.4 | +| | [LGX Info, Links, and Models](geoffreyyoung/lgx) | Useful information and models for using the Bondtech LGX extruder... | V1.8, V2.4, VSW, VT | +| | [FYSETC SPIDER DIN Bracket](geoffreyyoung/spider_bracket) | FYSETC SPIDER DIN Bracket | V1.8, V2.4 | +| gerritwellen | [Manta M8P Mount](gerritwellen/manta-m8p-bracket) | Mounting Bracket for BTT Manta M8P | V2.4, VT | +| golas | [V0.1 Extended tophat hinge](golas/v0-extended-tophat-hinge) | Extended tophat for v0.1 with hinges (integrated or screwed ones). | V0.2 | +| | [V0.1 Trident skirt remix with...](golas/v0-trident-skirt-mix) | Trident style v0.1 skirt mix with 12864 Mini Lcd on front or plain... | V0.2 | +| hartk1213 | [Voron0.2 2.8 Waveshare Display](hartk1213/Voron0.2_2.8_WaveshareDisplay) | 2.8 Waveshare display for V0.2 | V0.2 | +| | [Voron0.2 Rear Keystone Skirt](hartk1213/Voron0.2_Rear_Keystone_Skirt) | Added keystone slot on rear skirt for V0.2 | V0.2 | +| | [Voron0 C14Inlet](hartk1213/Voron0_C14Inlet) | Added a new Power inlet that uses a Fused C14 plug and switch that... | V0.2 | +| | [Voron0 ExtendedLegs](hartk1213/Voron0_ExtendedLegs) | New extended legs to raise the printer up a tiny bit more | V0.2 | +| | [Voron0 ExtrusionSkirt](hartk1213/Voron0_ExtrusionSkirt) | Created a new skirt design that uses 50mm extrusions as legs and it... | V0.2 | +| | [Voron0 Hinged Top Hat](hartk1213/Voron0_Hinged_Top_Hat) | Created a new hinged top hat design for the V0 so it can fold away... | V0.2 | +| | [Voron0 MGN9C X Axis](hartk1213/Voron0_MGN9C_X_Axis) | This mod, replaces the stock MGN7H for MGN9C on the V0 | V0.2 | +| | [Voron0 deck panel](hartk1213/Voron0_deck_panel_with_logo_and_VORON0) | Used @Kruppes blank deck panel to add the logo as well as the name... | V0.2 | +| | [Voron0 display dualcolor](hartk1213/Voron0_display_dualcolor) | Added a dual color file for the Voron Display Front housing | V0.2 | +| | [Voron2.4 GE5C](hartk1213/Voron2.4_GE5C) | This mod replaces the stack of printed z joints with a metal... | V2.4 | +| | [Voron2.4 SexBolt ZEndstop](hartk1213/Voron2.4_SexBolt_ZEndstop) | This mod replaces stock V2 Z endstop with a different style | V2.4, VT | +| | [Voron2.4 and Trident Pins Mod](hartk1213/Voron2.4_Trident_Pins_Mod) | This mod replaces all the M5 screws for all idlers/pulleys/bearings... | V2.4, VT | +| | [Voron2.4 Y Endstop Relocation](hartk1213/Voron2.4_Y_Endstop_Relocation) | This mod relocates the Y endstop to the top A drive piece | V2.4 | +| henrikssn | [Parametric Spool Holder](henrikssn/parametric_spool_holder) | Spool holder where the length is a parameter. | V1.8, V2.4, VT | +| | [Plug Panel Mod for Generic...](henrikssn/plug_panel_generic) | v2.4 plug panel for generic unfiltered modules with 66mm x 27mm... | V2.4 | +| hergtoler | [Exhaust Housing for 120mm Fan...](hergtoler/exhaust_120mm_duct) | v2.4 Exhaust Housing for 120mm Fan and 4in Duct | V2.4 | +| hernsl | [Bottom Panel Mag Clip](hernsl/bottom_panel_mag_clip) | v2.4 magnetic clips to retain bottom panel | V2.4 | +| hhammarstrand | [Afterburner connector cover for...](hhammarstrand/afterburner_connector_cover_42STH20-1004AS) | Connector cover for 42STH20-1004AS | VSW | +| hijax_pl | [Corner panel clip](hijax_pl/corner_panel_clip) | V2 panel corner frames using 3-way L brackets in the corners | V2.4 | +| | [Din Rail mount](hijax_pl/din_rail_mount) | Adapter to attach DIN Rail to 2020 extrusion. | V2.4 | +| | [Controler Board adapters](hijax_pl/ender_compatible_controller_mount) | DIN (rotated) and legacy adapters for boards like SKR mini E3. | V2.4 | +| hoschi | [FYSETC Spider DIN Rail Mount](hoschi/FYSETC_Spider_DIN_Mount) | DIN rail mount for FYSETC Spider | V2.4 | +| hymness1 | [10x11mm chain VSW](hymness1/10x11mm_chain_VSW) | Printable and openable 10x11mm chain | V0.2, VSW | +| | [Quickdraw probe Voron Switchwire](hymness1/Quickdraw_probe_Voron_Switchwire) | Detachable magnetic probe with docking system for VSW | VSW | +| iblue | [V0.1 Tophat Extractor](iblue/TophatExtractor) | Tophat Extractor for the Voron V0.1 with activated charcoal and... | V0.2 | +| jappaj | [V0.1 FanSaver](jappaj/FanSaver) | A printable fix for overheating V0.1 blower fans | V0.2 | +| jasonc | [V2.4 Z-Idler Shoulder Bolt Mod](jasonc/Z_Idler_Shoulder_Bolt) | Modification to the idler carriers to accept a 25mm shoulder bolt.... | V2.4 | +| jatson | [Plug panel mod for Schurter...](jatson/plug_panel_schurter) | A modified plug panel for Voron 2.4r1 with Schurter CD44.1101.151... | V2.4 | +| jaysuk | [4.3 Fly Screen Mount](jaysuk/4.3_fly_screen_mount) | A mount for a 4.3" Fly Screen | V0.2 | +| jeoje | [4.3" Touchscreen Mount](jeoje/4.3_Inch_Touchscreen_Mount) | Mounts a [Waveshare 4.3inch Capacitive Touch... | V2.4, VSW | +| | [Molex MLX and Microfit 3.0 Bed...](jeoje/Molex_MLX_Microfit_Bed_Connector_Mount) | Solid mount your bed connectors | V2.4 | +| | [Sturdy Handles](jeoje/Sturdy_Handles) | Modified v2.2 handles with no panel rest and with 4 anchor points | V2.4 | +| | [V2.4 Z Chain Guide with...](jeoje/Z_Chain_Guide_Thermistor_Mount) | Modifies the Z chain guide to hold a chamber thermistor | V2.4 | +| jgehrig | [V0 LCD Touchscreen Skirt](jgehrig/v0_lcdskirt) | 3.2" LCD Touch Screen Skirt | V0.2 | +| johanncc | [Raspberry Pi Camera Mount](johanncc/Raspberry_Pi_Camera_Mount) | Low profile raspberry pi camera mount | V0.2 | +| joposter | [V0 Clippable LED Caselight](joposter/v0_clippable_ledmounts) | LED Case light for the V0 that clips into the extrusions | V0.2 | +| kageurufu | [Euclid Probe Carriage](kageurufu/mgn12-euclid) | A MGN-12 carriage with an inset mount for a Euclid Probe | V1.8, V2.4, VT | +| khay | [Fan for V2-200mm²](khay/V2-200_4020_Electronics_Fan) | Middle Skirt for V2-200mm² Electronics Compartment | V2.4 | +| | [3x Keystone PlugPanel](khay/V2_3x_Keystone_Plugpanel) | PlugPanel with Options for 3 Keystones | V2.4 | +| | [V0 Micro Backplate](khay/micro_backplate) | Minimalistic backplate for cooler motors and electronics | V0.2 | +| kirby | [V0 Sherpa Mini Direct Drive Mod](kirby/v0_sherpa_mini_direct_drive) | A direct drive mod for the V0 using the Annex Sherpa Mini extruder | V0.2 | +| lakai | [Bruag Skirts](lakai/Bruag_Skirts) | V2 350mm skirts inspired by Bruag Facades | V2.4 | +| leandromarceddu | [PowerSkirt](leandromarceddu/PowerSkirt) | Modified skirtpiece for a digital power monitor | V2.4 | +| littleferris | [V0 c14 Skirt Inlet](littleferris/V0_Skirt_Inlet) | V0 C14 Skirt inlet | V0.2 | +| madfabrications | [Vertical PSU Mount](madfabrications/Vertical_PSU_Mount) | Mounts the PSU vertically on the DIN rails | V2.4 | +| madros | [V0 OLED-skirt](madros/V0_skirt_OLED) | V0 skirt with 0.96" OLED | V0.2 | +| maximilian-foerg | [Afterburner Turbo Mod](maximilian-foerg/AB_Turbo_Mod) | A purely cosmetic mod for Afterburner | V1.8, V2.4, VSW, VT | +| | [Switchwire Double 60mm Fan Mount](maximilian-foerg/VSW_Double_60mm_Fan_Mount) | A mount for two (or four) 60mm fans in SW's electronics compartment | VSW | +| mikepthomas | [MKS Mosfet Mount](mikepthomas/MKS_Mosfet_Mount) | MKS Mosfet Mount based of the Trident Raspberry Pi Mount. | V1.8, V2.4, VT | +| mjoaris | [10x11 Cable Chain Endcaps](mjoaris/10x11_Cable_Chain_Endcaps) | Printable Endcaps for 10x11 Cable Chains | V1.8, V2.4 | +| | [Mini12864 LCD Mount](mjoaris/Mini12864_LCD_Mount_for_V2.4) | Swiveling case for the Fysetc Mini12864 LCD | V2.4 | +| mosher | [Door hinges with M3 screws shafts](mosher/m3_door_hinges) | Simple mod of print in place door hinges, which uses m3 screws as... | V2.4 | +| mpfl | [V0.1 OLED-skirt](mpfl/V0.1_skirt_OLED) | V0.1 skirt with 0.96" OLED | V0.2 | +| muradir | [Zodiac BMO Stealthburner Toolhead](muradir/Zodiac_BMO_Stealthburner_Toolhead) | A Stealthburner toolhead for the Zodiac BMO Hotend, based on the... | V1.8, V2.4, VSW, VT | +| natewalck | [V1.8 Jigs](natewalck/v1.8_Jigs) | Jigs for assembling V1.8 | V1.8 | +| nhchiu | [V0.1 Movable Pulley Z Drive](nhchiu/V0.1_Movable_Pulley_Z) | A movable pulley system on the Z axis with 1:8 total speed ratio... | V0.2 | +| nikolasbabetas | [Neopixel Holder](nikolasbabetas/Neopixel_Holder) | A holder to attach Neopixel/WS2812B Led Strips to the V0.1 | V0.2 | +| ommy | [roller brackets](ommy/roller_brackets) | Brackets to help rolling V2 on its side. | V2.4 | +| oxno | [RBP Zero Bracket](oxno/rbp_zero_braket) | Bracket for Raspberry pi zero. | V1.8, V2.4 | +| padok | [Chain Anchor - ADXL345 mount Mod](padok/chain_anchor-ADXL345_mount) | A ADXL345 mount for the Afterburner | V2.4 | +| piet206 | [V1.8 Z Rails Mod](piet206/V1.8._Z_Rails_Mod) | Add MGN12H linear rails for Z axis motion | V1.8 | +| prasadp4009 | [StealthBurner CR Touch Mod](prasadp4009/SW_SB_CRTouch) | Voron SW StealthBurner CR Touch Mod | VSW | +| quattroerik | [V2.4 Door Hinge M3 3mm 180deg](quattroerik/front_door_m3_180_deg_3mm) | Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw... | V2.4, VT | +| randell | [Door Hinges](randell/Door_Hinges) | Door hinges that use an M3 bolt for a pin and bolts thru the panel | V2.4 | +| | [Microswitch Pod for PCB](randell/Microswitch_Endstop) | Modified endstop pod for use of endstop switches mounted on a PCB | V2.4 | +| raymondh | [Large Spool Holders](raymondh/LargeSpoolHolders) | Larger spool holders for KVP spools | V1.8, V2.4 | +| reQu1em00 | [Kirigami LED Bed Front](reQu1em00/Kirigami_LED_Bed_Front) | Kirigami bed front with space for a single LED or Neopixel button | V0.2 | +| reapola | [MKS CANable Pro DIN Mount](reapola/MKS_CANable_Pro_mount) | MKS CANable Pro mount which mounts on a DIN rail | V0.2, V1.8, V2.4, VSW, VT | +| revnull | [Raspberry Pi 7inch Display Mount](revnull/rpi_7in_display_mount) | An articulating mount for the offical Raspberry Pi 7inch touch screen | V2.4 | +| richardjm | [ADXL drag chain mount](richardjm/adxl-chain) | Permanent mount for ADXL boards on the back of the motor, replacing... | V2.4 | +| | [Back blanking plate](richardjm/back-plate) | Back blanking plate that can be used instead of the exhaust filter... | V2.4 | +| | [LED 15.5mm quarter round mounts](richardjm/led-mounts) | Mounting corners with integrated cable runs for 15.5mm quarter... | V2.4 | +| | [Picam corner mount](richardjm/picam-corner) | Out of the way corner mounted picam | V2.4 | +| | [Printable snap latches for 2020...](richardjm/snap-latch-2020) | Quick release panel latch inspired by the work of others. | V2.4 | +| rngSplat | [Printable Switchwire Deck Plate](rngSplat/SW_Deck_Plate) | Print a deck plate for Switchwire with debossed Voron logo | VSW | +| roboticator24 | [Touchscreen for OctoDash](roboticator24/4inch_touchscreen_mount_for_v2.4) | Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual... | V2.4 | +| rsheng118 | [BTT octopus DIN vertical mount](rsheng118/BTT_octopus_DIN_vertical_mount) | DIN vertical mount for Big Tech Tree Octopus board | V2.4 | +| ryandam | [Cable Management Duct](ryandam/Cable_management_duct) | Zip tie mount intergrated cable duct to hide your cable | V0.2 | +| sammynorway | [LGX stealthburner connector cover](sammynorway/LGX-stealthburner-connector-cover) | Cable cover for LGX and stealthburner | V1.8, V2.4, VSW, VT | +| samwiseg0 | [4 Channel Relay Under Deck Mount](samwiseg0/4channel_relay_under_deck_mount) | Mod to mount a 4 channel GPIO controlled relay | V2.4 | +| | [AB Plug (Microfit 1x4)](samwiseg0/ab_plug_microfit_1x4) | Mod to mount A & B motor connectors to the gantry | V2.4 | +| | [Corner Cable Hide/Cover (LED Wires)](samwiseg0/corner_cable_hide) | Mod to hide cables around z idlers | V2.4 | +| | [ESP8266 NodeMCU Din Mount](samwiseg0/esp8266_nodemcu_din_mount) | Din mount for ESP8266 NodeMCU | V2.4, VT | +| | [Extrusion/Chamber Thermistor Mount](samwiseg0/extrusion_thermistor_mount) | Extrusion mount for a NTC100K Thermistor extrusion | V0.2, V1.8, V2.4, VSW, VT | +| | [LRS PSU Screw Terminal Cover](samwiseg0/lrs_screw_terminal_cover) | Mod to cover the screw terminals for several LRS style PSUs | V0.2, V1.8, V2.4, VSW, VT | +| | [Microfit 2x3 Skirt Connector (ADXL)](samwiseg0/microfit_2x3_skirt_connector_adxl) | Mod for a Microfit 2x3 connector to be mounted in a skirt | V2.4 | +| | [Corsair Flash Voyager GTX Din Mount](samwiseg0/voyager_gtx_din_mount) | Din carrier for a Corsair Flash Voyager GTX | V2.4, VT | +| scanlory | [Clip-On Front Door Frame](scanlory/clip_on_door_frame) | Clip-on frame to stiffen and seal front door panels when using... | V2.4 | +| slitte | [PCB_Probe](slitte/PCB_Probe) | PCB for BAT85 and pull up resistor | V2.4, VT | +| | [ssd_bracket](slitte/ssd_bracket) | bracket for mounting a 2.5" ssd to a din rail | V2.4, VT | +| sloscotty | [Switchwire Wall Plate](sloscotty/SW_Wall_Plate) | SW plate for enclosure | VSW | +| | [NoNutz TopHat Cam Extension](sloscotty/TopHat_Cam_Extension) | Tophat extension with integrated webcam for V0/0.1 | V0.2 | +| spacelab2021 | [Orbiter Clockwork Mount](spacelab2021/Orbiter-Clockwork) | A clockwork adaptor for the Orbiter v1.5 Extruder with full... | V1.8, V2.4, VSW, VT | +| sse018 | [Octopus DIN Rail bracket](sse018/Octopus_DIN_Rail_bracket) | A Din rail mount for BTT Octopus board | V2.4 | +| strayr | [Creality toolhead for stealthburner](strayr/stealthburner_creality_toolhead) | Use a creality ender 3 style hotend with stealthburner | V1.8, V2.4, VSW | +| sttts | [Waveshare 5.5inch HDMI AMOLED Mount](sttts/Waveshare-5.5-inch-HDMI-AMOLED) | Mod to mount a Waveshare 5.5inch full HD display on a V2 | V2.4, VSW | +| tallman5 | [Z Locks](tallman5/z-locks) | Helping hands curing v2.4 build, replaces long zip ties. | V2.4 | +| tameike | [Din Rail 2020 Holder](tameike/DIN_Rail_2020_holder) | Attaching DIN Rails to 2020 | V2.4 | +| | [Din Rail SKR 90 deg](tameike/DIN_Rail_SKR_1.3_90deg) | SKR V1.3 bracket turned 90 degrees | V2.4 | +| | [Jetpack V0 base](tameike/Jetpack_V0) | Attach Jetpack to V0 frame | V0.2 | +| | [TacoRaven Mounting Frame](tameike/V0_TR_Mounting_Frame) | TR V0 mount | V0.2 | +| tayto-chip | [V2.4 Skirt Switch Mod](tayto-chip/skirt_switch_mod) | Add a ON/OFF Switch to side or front skirts | V2.4 | +| teookie | [AB dial indicator mount](teookie/AB_dial_indicator_mount) | Mount for attaching standard dial indicators to AB | V1.8, V2.4, VSW | +| | [SKR Brace](teookie/skr_brace) | Rigidize and stabilize SKR 1.4 mounts | V2.4 | +| th0mpy | [BEEFY Din Clips](th0mpy/beefy-din) | Two piece BEEFY Din Clips, holds stronger | V2.4 | +| togi | [Exhaust housing side fitting](togi/exhaust_housing_side_fitting) | Moves the exhaust housing bowden fitting 90 degrees to allow the... | V2.4 | +| top_gun_de | [mount_for_umbilical](top_gun_de/mount_for_umbilical) | Umbilical guide that goes on the chain anchor | V2.4 | +| warriorofwire | [Slenderfan for Afterburner](warriorofwire/slenderfan) | Lighter, quieter, smaller Afterburner | V2.4 | +| whoppingpochard | [Extrusion Backers](whoppingpochard/extrusion_backers) | Laser-cut metal pieces to counteract bimetallic frame warping | V2.4 | +| wile-e1 | [Deck Panel Support Clips](wile-e1/Deck_Panel_Support_Clips) | Clips to help support lower deck panels to prevent (or fix) warping: | V1.8, V2.4 | +| | [Stealthburner + CW1 + PCB Cover](wile-e1/Stealthburner_CW1_PCB_Cover) | Low-poly for Stealthburner + CW1 + PCB installations: | V1.8, V2.4, VSW | +| wrez | [V0 Alternate IEC 320 C14 Power...](wrez/astrodyne-inlet) | Drop in replacement for alternate-source power inlet if spec inlet... | V0.2 | +| xbst_ | [ADXL345 V0 Mount](xbst_/ADXL345_V0_Mount) | V0 Mount for a ADXL345 module | V0.2 | +| | [Car Hood Style Bed Hinge](xbst_/Bed_Hinge) | A way of reaching electronics from the top by having a "car hood"... | V2.4 | +| | [Duct Mount](xbst_/Duct_Mount) | 100mm/4" ducting mount for ventilation. Also supports umbilical... | V2.4 | +| | [DuetZero](xbst_/DuetZero) | Pi Zero mount over a Duet2 for space saving | V0.2, V1.8, V2.4 | +| | [Easy Access Rear Panels](xbst_/Easy_Access_Rear_Panels_v0) | New rear panels designed to expose the extruder for easy filament... | V0.2 | +| | [Flat V2.4 Skirts](xbst_/Flat_Skirts) | Flat V2.4 Skirts so a panel without cutouts can be used | V2.4 | +| | [HOYMK SSR Mount](xbst_/HOYMK_SSR_Mount) | Mount for Chinese HOYMK SSR | V0.2 | +| | [Hat LED Mount](xbst_/Hat_LED_Mount) | Top Hat LED module mount | V0.2 | +| | [PCB LED Holder](xbst_/LED_Holder) | Very simple mount for some (?) PCB LED Bars | V1.8, V2.4 | +| | [DIN Mount Max31865](xbst_/Max31865_DIN_Mount) | A simple DIN rail mount for the Adafruit (or SAME SIZE clone)... | V1.8, V2.4 | +| | [DIN Mount Omron Relay](xbst_/Omron_DIN_Mount) | A simple DIN rail mount for the BOM Relay | V1.8, V2.4 | +| | [DIN Mount Pi 4x Relay Board](xbst_/Relay_DIN_Mount) | A simple DIN rail mount for the 4 channel relay board for Raspberry Pi | V1.8, V2.4 | +| | [V0 Electronics Cover](xbst_/V0_Electronic_Panel) | A printed cover for v0 electronics. Requires larger printer to print. | V0.2 | +| | [Mobius 4 (M4) V0 Mod](xbst_/V0_M4_Mod) | Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder... | V0.2 | +| | [V0 PiCam Mount](xbst_/V0_Picam) | A Raspberry Pi Camera Mount For V0 | V0.2 | +| | [Screwed Front Door Hinge](xbst_/V0_Screw_Front_Hinge_Mod) | Mod to screw the front door panel (instead of VHB) | V0.2 | +| | [V0 Buttons & OLED Mount](xbst_/V0_Skirt_Buttons) | Mod to mount custom Gcode macro buttons & Waveshare 1.3" OLED display | V0.2 | +| | [V2.4 Fanless Middle Skirt](xbst_/V2.4_Fanless_Middle_Skirt) | A Fanless alternative middle side skirt | V2.4 | +| | [V2.4 Skirt Buttons](xbst_/V2.4_Skirt_Buttons) | Skirt mod for custom Gcode macro buttons | V2.4 | +| | [ZipClip V0](xbst_/ZipClip_v0) | Very simple ziptie mount for v0 1515 extrusions | V0.2 | +| xceled | [Single Panel Magnet Mount](xceled/Single_Panel_Magnet_Mount) | Mount your front panel using only magnets | V2.4 | +| yenda | [SW More Robust XZ Belt Paths](yenda/vsw_more_robust_belt_paths) | Small mods to belt routing components to ensure a better/more... | VSW | +| yeri | [V0 Magnetic Panels](yeri/V0_Magnetic_Panels) | Mount V0 panels with magnets, removes need for hinges and lets you... | V0.2 | +| | [V1 3Z](yeri/V1_3Z) | 3Z mod for V1 | V1.8 | +| zruncho | [V0 No-Drop Nuts](zruncho/V0_No_Drop_Nuts) | Voron0 nut inserts which auto-align (LDO frames only) | V0.2 | diff --git a/printer_mods/Rhastlyn/60mmFanCover/.metadata.yml b/printer_mods/Rhastlyn/60mmFanCover/.metadata.yml new file mode 100644 index 000000000..ab0685c5a --- /dev/null +++ b/printer_mods/Rhastlyn/60mmFanCover/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: A easy to install cover for spec 60mm fans originally designed for a + 2.4 build +images: +- Images/FancoverOverview.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: 60mm Fan Cover diff --git a/printer_mods/Rhastlyn/WansviewCameraMount/.metadata.yml b/printer_mods/Rhastlyn/WansviewCameraMount/.metadata.yml new file mode 100644 index 000000000..c8a75e55d --- /dev/null +++ b/printer_mods/Rhastlyn/WansviewCameraMount/.metadata.yml @@ -0,0 +1,13 @@ +cad: [] +description: A camera mount that replaces the OEM part to allow the camera to be mounted + to a 2020 extrusion +images: +- Images/WansviewWebcam.PNG +- Images/HardwareInstalled.jpg +- Images/CameraMountingHardware_Arrows.png +- Images/InstalledBackFinal.jpg +- Images/InstalledSideBack.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Wansview 1080p Camera Mount diff --git a/printer_mods/RockNLol/RockNRoll/.metadata.yml b/printer_mods/RockNLol/RockNRoll/.metadata.yml new file mode 100644 index 000000000..381b070da --- /dev/null +++ b/printer_mods/RockNLol/RockNRoll/.metadata.yml @@ -0,0 +1,20 @@ +cad: [] +description: Rockers to roll the printer on its back for easier access to the electronics + compartment +images: +- images/threaded_inserts_01.jpg +- images/assembly_braces_02.jpg +- images/assembly_braces_01.jpg +- images/example_03.jpg +- images/assembly_base_plates_03.jpg +- images/assembly_base_plates_02.jpg +- images/example_02.jpg +- images/assembly_base_plates_01.jpg +- images/example_01.jpg +- images/example_04.jpg +- images/support_01.jpg +- images/assembly_rockers_01.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: RockNRoll diff --git a/printer_mods/ScramblerUSA/SideSkirtPowerSwitch/.metadata.yml b/printer_mods/ScramblerUSA/SideSkirtPowerSwitch/.metadata.yml new file mode 100644 index 000000000..cf18c42e0 --- /dev/null +++ b/printer_mods/ScramblerUSA/SideSkirtPowerSwitch/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- STEP/SkirtPower.step +description: Skirt-mounted rocker switch for easy access for Voron 2.4 +images: +- images/SkirtPower.png +- images/SkirtPower-photo.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Side Skirt Power Switch diff --git a/printer_mods/See1807/Voron_V0_Exhaust_and_LED_Mod/.metadata.yml b/printer_mods/See1807/Voron_V0_Exhaust_and_LED_Mod/.metadata.yml new file mode 100644 index 000000000..e32c00fe3 --- /dev/null +++ b/printer_mods/See1807/Voron_V0_Exhaust_and_LED_Mod/.metadata.yml @@ -0,0 +1,18 @@ +cad: +- CAD/Tophead_Mod_V0_v4.f3d +description: A mount for 10mm LED strips and Exhaust for Voron V0 +images: +- img/Foto_2.jpg +- img/Foto_1.jpg +- img/LED_Light_4.PNG +- img/LED_Light_5.PNG +- img/LED_Light_1.PNG +- img/LED_Light_2.PNG +- img/LED_Light_3.PNG +- img/Konstruktion_1.PNG +- img/Konstruktion_3.PNG +- img/Konstruktion_2.PNG +mod_version: 1 +printer_compatibility: +- V0.2 +title: TopHat Exhaust and LED Light diff --git a/printer_mods/Shiftingtech/Trident_dual_power_switch/.metadata.yml b/printer_mods/Shiftingtech/Trident_dual_power_switch/.metadata.yml new file mode 100644 index 000000000..84dcf3fd3 --- /dev/null +++ b/printer_mods/Shiftingtech/Trident_dual_power_switch/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- CAD/Trident_dual_power_switch.step +- CAD/Trident_dual_power_switch.f3d +description: A replacement skirt, allowing 2 power switches +images: +- Images/DualSwitch.jpg +mod_version: 1 +printer_compatibility: +- VT +title: Trident Dual Power Switch diff --git a/printer_mods/ShinyPants/Orange_Pi_3_LTS_DIN/.metadata.yml b/printer_mods/ShinyPants/Orange_Pi_3_LTS_DIN/.metadata.yml new file mode 100644 index 000000000..b602b9879 --- /dev/null +++ b/printer_mods/ShinyPants/Orange_Pi_3_LTS_DIN/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/OrangePi_Bracket.STEP +- CAD/OrangePi_Bracket.SLDPRT +description: A DIN rail mount for OrangePi LTS 3 +images: [] +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: OrangePi 3 LTS DIN Rail bracket diff --git a/printer_mods/Shteeeeeve/V01-LED-Tophat/.metadata.yml b/printer_mods/Shteeeeeve/V01-LED-Tophat/.metadata.yml new file mode 100644 index 000000000..d3aac14ea --- /dev/null +++ b/printer_mods/Shteeeeeve/V01-LED-Tophat/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- STEP/V01-LED-Tophat.step +description: V0.1 LED Tophat w/ 24V LED Lightstrip +images: +- Images/V0-LED-Tophat-Photo.jpg +- Images/V01-LED-Tophat-03.jpg +- Images/V01-LED-Tophat-02.jpg +- Images/V01-LED-Tophat-01.jpg +- Images/V01-LED-Tophat-wireframe-1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 LED Tophat diff --git a/printer_mods/Slidr/PanzerBalls2.4/.metadata.yml b/printer_mods/Slidr/PanzerBalls2.4/.metadata.yml new file mode 100644 index 000000000..6a3363149 --- /dev/null +++ b/printer_mods/Slidr/PanzerBalls2.4/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: Squash Ball Feet for V2.4 +images: +- 02-Optional_z-Drive-Mod/Panzerball_zDrive_Mod.png +- 01-Normal/Panzerballs.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: PanzerBalls 2.4 diff --git a/printer_mods/Slidr/PanzerChain2.4/.metadata.yml b/printer_mods/Slidr/PanzerChain2.4/.metadata.yml new file mode 100644 index 000000000..946a477ff --- /dev/null +++ b/printer_mods/Slidr/PanzerChain2.4/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Energychain for V2.4 +images: +- OverviewLarge.JPG +mod_version: 1 +printer_compatibility: +- V2.4 +title: PanzerChain 2.4 diff --git a/printer_mods/Spaghetti-Bolognese/LCD_case_mod/.metadata.yml b/printer_mods/Spaghetti-Bolognese/LCD_case_mod/.metadata.yml new file mode 100644 index 000000000..6c255924f --- /dev/null +++ b/printer_mods/Spaghetti-Bolognese/LCD_case_mod/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- Mini12864_Case_Assembly.f3d +description: Improvements to the V2.4 mini12864 LCD case inc E-stop button cover +images: +- LCD_Front_mod.JPG +- LCD_Front_standard.JPG +- LCD_mod_installed.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: LCD Case Mod diff --git a/printer_mods/Spaghetti-Bolognese/Z_drive_motor_mount/.metadata.yml b/printer_mods/Spaghetti-Bolognese/Z_drive_motor_mount/.metadata.yml new file mode 100644 index 000000000..bec3bb017 --- /dev/null +++ b/printer_mods/Spaghetti-Bolognese/Z_drive_motor_mount/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- Z_Motor_Mount _B.f3d +- Z_Motor_Mount_A.f3d +description: Z drive motor mount bracket mod to improve pulley to belt alignment +images: +- Long_key.JPG +- Small_key.JPG +mod_version: 1 +printer_compatibility: +- V2.4 +title: Simplified Z Drive Motor Mount diff --git a/printer_mods/StvPtrsn/320mm_Build/.metadata.yml b/printer_mods/StvPtrsn/320mm_Build/.metadata.yml new file mode 100644 index 000000000..62d00df6e --- /dev/null +++ b/printer_mods/StvPtrsn/320mm_Build/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/side_skirt_ab_320_x2.f3d +- CAD/front_rear_skirt_ab_320_x2.step +- CAD/side_skirt_ab_320_x2.step +description: Skirts for a 320mm build +images: +- Images/side.jpg +- Images/rear.jpg +- Images/front.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Skirts for a 320mm Build diff --git a/printer_mods/StvPtrsn/Keystone_Jack_Filtered_Mains_Panel/.metadata.yml b/printer_mods/StvPtrsn/Keystone_Jack_Filtered_Mains_Panel/.metadata.yml new file mode 100644 index 000000000..4ca4ecb66 --- /dev/null +++ b/printer_mods/StvPtrsn/Keystone_Jack_Filtered_Mains_Panel/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/rear_skirt_filtered_mains_keystone.step +- CAD/rear_skirt_filtered_mains_keystone.f3d +- CAD/plug_panel_filtered_mains_keystone.f3d +- CAD/plug_panel_filtered_mains_keystone.step +description: Add a keystone jack to your filtered mains plug panel +images: +- Images/rear.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Keystone Jack for Filtered Mains Panel diff --git a/printer_mods/StvPtrsn/Parts_Jigs_and_Mods/.metadata.yml b/printer_mods/StvPtrsn/Parts_Jigs_and_Mods/.metadata.yml new file mode 100644 index 000000000..5d855c6f1 --- /dev/null +++ b/printer_mods/StvPtrsn/Parts_Jigs_and_Mods/.metadata.yml @@ -0,0 +1,23 @@ +cad: +- Tools_Jigs/PTFE_Flush_Cutter.step +- Mods/Legacy/PS_stabilizerer.step +- Mods/Legacy/fan_grille.step +- Mods/Legacy/[tpu]_OB_Corner_Foot.step +- Mods/Legacy/Legacy_Ender3_bed_mount_B.step +- Mods/Trident/z_stepper_left_camera.step +- Mods/Switchwire/spool_holder_base_side.step +- Mods/Switchwire/panel_spacer_tool.step +- Mods/Switchwire/PTFE_tube_side_mount.step +- Mods/2/z_belt_cover_b_camera.step +- Parts/VHB_ZipTie_Anchor.step +- Parts/6-pin_microfit_skirt_insert.step +description: Parts, Jigs and modifications I use for my builds +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VSW +- VT +title: Parts_Jigs and Mods diff --git a/printer_mods/StvPtrsn/Side_Fan_Support_No_Tape/.metadata.yml b/printer_mods/StvPtrsn/Side_Fan_Support_No_Tape/.metadata.yml new file mode 100644 index 000000000..7d2030435 --- /dev/null +++ b/printer_mods/StvPtrsn/Side_Fan_Support_No_Tape/.metadata.yml @@ -0,0 +1,27 @@ +cad: +- CAD/[a]_60mm_fan_emptygrill.step +- CAD/[a]_60mm_fan_grill_a.step +- CAD/[a]_60mm_fan_grill_b_M3.step +- CAD/side_fan_support_x2.f3d +- CAD/[a]_60mm_fan_grill_a_M3.step +- CAD/side_fan_support_x2.step +- CAD/[a]_60mm_fan_emptygrill_M3.step +- CAD/side_fan_support_x2_M3.f3d +- CAD/[a]_60mm_fan_grill_b.step +description: Mount the 60mm side fans and inserts without tape +images: +- Images/no_grill_M3.jpg +- Images/no_grill.jpg +- Images/side_fan_support_M3.jpg +- Images/fan2.jpg +- Images/insert2_M3.jpg +- Images/fan1.jpg +- Images/fan1_M3.jpg +- Images/side_fan_support.jpg +- Images/fan2_M3.jpg +- Images/insert1.jpg +- Images/insert2.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Side Fan Support, No Tape diff --git a/printer_mods/Takuya/USBCameraMount/.metadata.yml b/printer_mods/Takuya/USBCameraMount/.metadata.yml new file mode 100644 index 000000000..fb20fe075 --- /dev/null +++ b/printer_mods/Takuya/USBCameraMount/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- VoronCamMount.step +- VoronCamMount.f3d +description: WANSVIEW 1080p Camera Mount for Voron 2.4 +images: +- Screenshot_4.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: WANSVIEW USB Camera Mount diff --git a/printer_mods/TheSquiffy/V0_Belts_holder/.metadata.yml b/printer_mods/TheSquiffy/V0_Belts_holder/.metadata.yml new file mode 100644 index 000000000..af2658940 --- /dev/null +++ b/printer_mods/TheSquiffy/V0_Belts_holder/.metadata.yml @@ -0,0 +1,17 @@ +cad: [] +description: V0 Belts Holder +images: +- Images/bh10.jpg +- Images/bh1.png +- Images/bh3.png +- Images/bh2.png +- Images/bh6.png +- Images/bh7.jpg +- Images/bh5.png +- Images/bh4.png +- Images/bh9.jpg +- Images/bh8.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Belts holder diff --git a/printer_mods/TiagoBarata/Logitech_C270_Mount/.metadata.yml b/printer_mods/TiagoBarata/Logitech_C270_Mount/.metadata.yml new file mode 100644 index 000000000..92fd9632e --- /dev/null +++ b/printer_mods/TiagoBarata/Logitech_C270_Mount/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- C270_Top_Center_Mount.step +description: Logitech C270 Top Center Mount +images: +- C270_Top_Center_Mount_View.jpg +- C270_Top_Center_Mount_1.jpg +- C270_Top_Center_Mount_2.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Logitech C270 Mount diff --git a/printer_mods/Tircown/DIN_mount_RS-15-5/.metadata.yml b/printer_mods/Tircown/DIN_mount_RS-15-5/.metadata.yml new file mode 100644 index 000000000..f530fa142 --- /dev/null +++ b/printer_mods/Tircown/DIN_mount_RS-15-5/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: A DIN mount for the RS-15-5 +images: [] +mod_version: 1 +printer_compatibility: +- V2.4 +title: DIN mount RS-15-5 PSU diff --git a/printer_mods/Tircown/Display_mount_5inch/.metadata.yml b/printer_mods/Tircown/Display_mount_5inch/.metadata.yml new file mode 100644 index 000000000..3f2295934 --- /dev/null +++ b/printer_mods/Tircown/Display_mount_5inch/.metadata.yml @@ -0,0 +1,11 @@ +cad: [] +description: Tiltable mount for a 5" tactile display +images: +- Images/Capture.JPG +- Images/image1.jpg +- Images/image0.jpg +- Images/image3.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Display mount 5" diff --git a/printer_mods/Tircown/Raspberry_plug_panel/.metadata.yml b/printer_mods/Tircown/Raspberry_plug_panel/.metadata.yml new file mode 100644 index 000000000..b136b673d --- /dev/null +++ b/printer_mods/Tircown/Raspberry_plug_panel/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Raspberry mount vertically in the plug panel, allow easy access to ports +images: +- Images/image1.jpg +- Images/image0.jpg +- Images/image2.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Raspberry in plug panel diff --git a/printer_mods/Tircown/V01_skirt_buttons/.metadata.yml b/printer_mods/Tircown/V01_skirt_buttons/.metadata.yml new file mode 100644 index 000000000..e57415bc5 --- /dev/null +++ b/printer_mods/Tircown/V01_skirt_buttons/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/V01_skirt_button.step +description: Buttons for V0.1 spec skirts +images: +- Images/picture1.jpg +- Images/picture0.jpg +- Images/cad_split.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 Skirt buttons diff --git a/printer_mods/Triano/Ender_3Pro_Switchwire/.metadata.yml b/printer_mods/Triano/Ender_3Pro_Switchwire/.metadata.yml new file mode 100644 index 000000000..618749f22 --- /dev/null +++ b/printer_mods/Triano/Ender_3Pro_Switchwire/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- CAD/Ender_3_Pro_Switchwire_v15.step +description: Convesion of an Ender 3 Pro or V2 to a Switchwire +images: +- Images/Bottom.png +- Images/SN049.jpg +- Images/Home.png +- Images/Left.png +- Images/Top.png +- Images/Back.png +- Images/Right.png +mod_version: 1 +printer_compatibility: +- VSW +title: Ender 3 Pro or V2 to Switchwire Mod diff --git a/printer_mods/Ultrawaffles/Ender_3_to_SW/.metadata.yml b/printer_mods/Ultrawaffles/Ender_3_to_SW/.metadata.yml new file mode 100644 index 000000000..696b248b5 --- /dev/null +++ b/printer_mods/Ultrawaffles/Ender_3_to_SW/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- CAD/voron_enderwire_v1.03.f3d +description: A conversion mod for the ender 3 to switchwire. Designed to allow for + enclosure and uses original ender 3 motors and switches +images: +- Images/Fusion360_icWbvkmAlb.png +mod_version: 1 +printer_compatibility: +- VSW +title: Ender 3 to SW conversion diff --git a/printer_mods/VinnyCordeiro/RGB_LED_grid_for_SB/.metadata.yml b/printer_mods/VinnyCordeiro/RGB_LED_grid_for_SB/.metadata.yml new file mode 100644 index 000000000..3683323a3 --- /dev/null +++ b/printer_mods/VinnyCordeiro/RGB_LED_grid_for_SB/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- KiCad/LED_WS2812_2020.step +description: A small RGB LED grid for Stealthburner's logo +images: +- IMG_2805.gif +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +- VT +title: RGB LED grid for Stealthburner diff --git a/printer_mods/Weaslus/Electronics-Bay-Seperator/.metadata.yml b/printer_mods/Weaslus/Electronics-Bay-Seperator/.metadata.yml new file mode 100644 index 000000000..fcd8b8b13 --- /dev/null +++ b/printer_mods/Weaslus/Electronics-Bay-Seperator/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Better enclose chamber and keep heat from electronics +images: +- Seperator.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: Electronics Bay and Enclosure Seperator diff --git a/printer_mods/ZZP8202/Pull-out_electrical_store/.metadata.yml b/printer_mods/ZZP8202/Pull-out_electrical_store/.metadata.yml new file mode 100644 index 000000000..270bed8e0 --- /dev/null +++ b/printer_mods/ZZP8202/Pull-out_electrical_store/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- 3D/Voron_V2.4_Pull-out_electrical_store.STEP +description: "Voron 2.4 Pull-out electrical store\uFF08350mm only\uFF09" +images: +- Photos/IMG_6101.jpg +- Photos/IMG_6103.jpg +- Photos/IMG_6107.jpg +- Photos/IMG_6099.jpg +- Photos/Voron_V2.4_Pull-out_electrical_store.PNG +- Photos/IMG_6105.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Pull-out electrical store diff --git a/printer_mods/Zen3D/V0_1515_T-nut/.metadata.yml b/printer_mods/Zen3D/V0_1515_T-nut/.metadata.yml new file mode 100644 index 000000000..d70e6accd --- /dev/null +++ b/printer_mods/Zen3D/V0_1515_T-nut/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: M3 square and hex nuts for Voron0 1515 frame +images: +- IMG3.jpg +- IMG2.jpg +- IMG1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 1515 T-nut diff --git a/printer_mods/Zen3D/V0_Handle/.metadata.yml b/printer_mods/Zen3D/V0_Handle/.metadata.yml new file mode 100644 index 000000000..af20ca42d --- /dev/null +++ b/printer_mods/Zen3D/V0_Handle/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: Voron0 Handle for 3mm panels +images: +- IMG2.jpg +- IMG1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Handle diff --git a/printer_mods/Zen3D/V0_MidPanel_HexPattern/.metadata.yml b/printer_mods/Zen3D/V0_MidPanel_HexPattern/.metadata.yml new file mode 100644 index 000000000..36ce77c96 --- /dev/null +++ b/printer_mods/Zen3D/V0_MidPanel_HexPattern/.metadata.yml @@ -0,0 +1,15 @@ +cad: [] +description: Voron0 MidPanel with Hex pattern and Wire cover +images: +- IMG/V00_2.jpg +- IMG/V00_1.jpg +- IMG/V01_1.jpg +- IMG/V01_2.jpg +- IMG/IMG5.jpg +- IMG/IMG4.jpg +- IMG/IMG3.jpg +- IMG/IMG0.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 MidPanel HexPattern diff --git a/printer_mods/Zen3D/V0_Skirt/.metadata.yml b/printer_mods/Zen3D/V0_Skirt/.metadata.yml new file mode 100644 index 000000000..3cb998784 --- /dev/null +++ b/printer_mods/Zen3D/V0_Skirt/.metadata.yml @@ -0,0 +1,15 @@ +cad: [] +description: SSR, PowerSwitch, Adxl, Nameplate and color change printing +images: +- IMG/img9.jpg +- IMG/img8.jpg +- IMG/img5.jpg +- IMG/img6.jpg +- IMG/img7.jpg +- IMG/img3.jpg +- IMG/img2.jpg +- IMG/img1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Skirt set diff --git a/printer_mods/aTinyShellScript/RS_PSU_DIN_Brackets/.metadata.yml b/printer_mods/aTinyShellScript/RS_PSU_DIN_Brackets/.metadata.yml new file mode 100644 index 000000000..4d9d8653c --- /dev/null +++ b/printer_mods/aTinyShellScript/RS_PSU_DIN_Brackets/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- CAD/Meanwell_RS_PSU_DIN_Brackets_v1.f3d +description: DIN brackets for MeanWell RS PSUs with 80mm spacing. +images: +- Images/brackets.jpg +- Images/mounted.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: RS PSU DIN Bracket diff --git a/printer_mods/ademuri/Lights_Camera_Voron/.metadata.yml b/printer_mods/ademuri/Lights_Camera_Voron/.metadata.yml new file mode 100644 index 000000000..b4c97bc02 --- /dev/null +++ b/printer_mods/ademuri/Lights_Camera_Voron/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: A mount for LED strips and Picam for the V0.1 +images: +- camera_mount_detail.jpg +- printer_with_rails.jpg +- camera_view.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: Lights, Camera, Voron diff --git a/printer_mods/aeresov/MeanWell_UHP_DIN_mount/.metadata.yml b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/.metadata.yml new file mode 100644 index 000000000..bd45b5b27 --- /dev/null +++ b/printer_mods/aeresov/MeanWell_UHP_DIN_mount/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/MeanWell_UHP_DIN_mount.f3d +description: A bracket for MeanWell UHP series PSU (200, 350 and 500) to mount it + across 2 DIN rails. +images: +- images/db.png +- images/photo_railed_1.png +- images/photo_railed_2.png +- images/photo_bare_2.png +- images/photo_bare_1.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: MeanWell UHP-xxx DIN mount diff --git a/printer_mods/aeresov/Raspberry_Pi_DIN_mount/.metadata.yml b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/.metadata.yml new file mode 100644 index 000000000..0e7e0df4e --- /dev/null +++ b/printer_mods/aeresov/Raspberry_Pi_DIN_mount/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/RPi_DIN_mount.f3d +description: A bracket for Raspberry Pi 3/4 to mount it onto DIN rail, along or across. +images: +- images/photo_railed.png +- images/db.png +- images/photo_bare_3.png +- images/photo_bare_2.png +- images/photo_bare_1.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Raspberry Pi DIN mount diff --git a/printer_mods/aeresov/SKR_DIN_mount/.metadata.yml b/printer_mods/aeresov/SKR_DIN_mount/.metadata.yml new file mode 100644 index 000000000..35004e108 --- /dev/null +++ b/printer_mods/aeresov/SKR_DIN_mount/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/SKR_DIN_mount.f3d +description: A bracket for SKR 1.3/1.4 board to mount it onto DIN rail, along or across. +images: +- images/photo_railed.png +- images/db.png +- images/photo_bare_3.png +- images/photo_bare_2.png +- images/photo_bare_1.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: SKR 1.3/1.4 DIN mount diff --git a/printer_mods/aeresov/TL_filament_sensor_bracket/.metadata.yml b/printer_mods/aeresov/TL_filament_sensor_bracket/.metadata.yml new file mode 100644 index 000000000..a3a5c9e41 --- /dev/null +++ b/printer_mods/aeresov/TL_filament_sensor_bracket/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/TL_filament_sensor_bracket.f3d +description: A bracket for TL filament sensor to mount near stock spool holder. +images: +- images/db.png +- images/photo_railed_1.png +- images/photo_railed_2.png +- images/photo_bare_2.png +- images/photo_bare_1.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: TL filament sensor bracket diff --git a/printer_mods/aeresov/cable_tie_DIN_mount/.metadata.yml b/printer_mods/aeresov/cable_tie_DIN_mount/.metadata.yml new file mode 100644 index 000000000..17386f5ce --- /dev/null +++ b/printer_mods/aeresov/cable_tie_DIN_mount/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/cable_tie_DIN_mount.f3d +description: A bracket for cable ties to route cables across DIN rails. +images: +- images/photo_railed.png +- images/db.png +- images/photo_bare.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: cable tie DIN mount diff --git a/printer_mods/al3ph/analog_timer_mount/.metadata.yml b/printer_mods/al3ph/analog_timer_mount/.metadata.yml new file mode 100644 index 000000000..ec3a15a56 --- /dev/null +++ b/printer_mods/al3ph/analog_timer_mount/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: A skirt mount for analog timer +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: Analog Timer Mount diff --git a/printer_mods/al3ph/filament_runout/.metadata.yml b/printer_mods/al3ph/filament_runout/.metadata.yml new file mode 100644 index 000000000..8fc06e758 --- /dev/null +++ b/printer_mods/al3ph/filament_runout/.metadata.yml @@ -0,0 +1,14 @@ +cad: [] +description: A simple filament runout sensor +images: +- images/front.jpeg +- images/in_use.jpeg +- images/inside.jpeg +- images/back.jpeg +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VSW +title: Filament Runout Sensor diff --git a/printer_mods/al3ph/led_mount/.metadata.yml b/printer_mods/al3ph/led_mount/.metadata.yml new file mode 100644 index 000000000..921825775 --- /dev/null +++ b/printer_mods/al3ph/led_mount/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: A mount for 10mm LED WS2812 strips +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: LED Mount diff --git a/printer_mods/al3ph/pl05_mount/.metadata.yml b/printer_mods/al3ph/pl05_mount/.metadata.yml new file mode 100644 index 000000000..d3734b21d --- /dev/null +++ b/printer_mods/al3ph/pl05_mount/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- mount.f3d +- mount.step +description: A mount PL05 inductive sensor +images: +- probe.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: PL05 Sensor Mount diff --git a/printer_mods/alanho/BTT_PITFT50_v2_Mount/.metadata.yml b/printer_mods/alanho/BTT_PITFT50_v2_Mount/.metadata.yml new file mode 100644 index 000000000..81b7a64bb --- /dev/null +++ b/printer_mods/alanho/BTT_PITFT50_v2_Mount/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: A mount for the BTT PITFT50 v2 Touch Display +images: +- images/f360.jpg +- images/IMG_6451.jpg +- images/IMG_6447.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: BTT PITFT50 v2 Mount diff --git a/printer_mods/albert/IKEA_Dioder_Led_Mount/.metadata.yml b/printer_mods/albert/IKEA_Dioder_Led_Mount/.metadata.yml new file mode 100644 index 000000000..9a48691dd --- /dev/null +++ b/printer_mods/albert/IKEA_Dioder_Led_Mount/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- Dioder Led Mount.step +description: A mount for the IKEA Dioder LED strip +images: +- Dioder_Led_Mount_Render_1.png +- Dioder_Led_Mount_Render_3.png +- Dioder_Led_Mount_Render_2.png +- IKEA_Dioder_LED_Strip.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: IKEA Dioder Led Mount diff --git a/printer_mods/antoinecellerier/ds18b20-sensor-mount/.metadata.yml b/printer_mods/antoinecellerier/ds18b20-sensor-mount/.metadata.yml new file mode 100644 index 000000000..8f2540866 --- /dev/null +++ b/printer_mods/antoinecellerier/ds18b20-sensor-mount/.metadata.yml @@ -0,0 +1,16 @@ +cad: +- CAD/DS18B20-sensor-mount.f3d +description: DS18B20 temperature sensor mount +images: +- Images/CAD_1.jpg +- Images/CAD_3.jpg +- Images/CAD_2.jpg +- Images/CAD_4.jpg +- Images/PIC_4.jpg +- Images/PIC_3.jpg +- Images/PIC_2.jpg +- Images/PIC_1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: DS18B20 Sensor Mount diff --git a/printer_mods/ardichoke/v0-long-thumb-nut/.metadata.yml b/printer_mods/ardichoke/v0-long-thumb-nut/.metadata.yml new file mode 100644 index 000000000..d1b831838 --- /dev/null +++ b/printer_mods/ardichoke/v0-long-thumb-nut/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- CAD/bed_thumb_nut.step +description: Taller thumb nuts for V0 bed +images: +- images/installed.jpg +- images/part.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Long Thumb Nut diff --git a/printer_mods/arkeet/dti-mount/.metadata.yml b/printer_mods/arkeet/dti-mount/.metadata.yml new file mode 100644 index 000000000..3321b3e55 --- /dev/null +++ b/printer_mods/arkeet/dti-mount/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- dti-mount.f3d +- dti-mount.step +description: A toolhead mount for a dial test indicator, where the tip is located + at the nozzle. +images: +- images/photo.jpg +- images/render.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: Dial test indicator mount diff --git a/printer_mods/arkeet/magnet-fan-cover/.metadata.yml b/printer_mods/arkeet/magnet-fan-cover/.metadata.yml new file mode 100644 index 000000000..0c1972f8f --- /dev/null +++ b/printer_mods/arkeet/magnet-fan-cover/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- CAD/magnet-fan-cover.f3d +- CAD/magnet-fan-cover.step +description: A replacement hotend fan cover, held with magnets instead of screws. +images: +- images/render2.png +- images/render1.png +- images/section.png +- images/photo.jpg +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +title: Magnetic hotend fan cover diff --git a/printer_mods/arkeet/mgn12/.metadata.yml b/printer_mods/arkeet/mgn12/.metadata.yml new file mode 100644 index 000000000..1172a44b5 --- /dev/null +++ b/printer_mods/arkeet/mgn12/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/V2.4_MGN12.step +description: Replaces the dual MGN9H rails with a single MGN12H. +images: +- Images/carriage.png +- Images/x_axis.png +- Images/photo.jpg +- Images/carriage_assembly.png +- Images/carriage_mounting.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: MGN12 X-axis diff --git a/printer_mods/arkeet/v0-dc-inlet/.metadata.yml b/printer_mods/arkeet/v0-dc-inlet/.metadata.yml new file mode 100644 index 000000000..516cc7165 --- /dev/null +++ b/printer_mods/arkeet/v0-dc-inlet/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/v0-dc-inlet.step +description: Skirt inlet for external 24V DC power supply. +images: +- Images/assembly1.png +- Images/assembly2.png +- Images/assembly3.png +- Images/wiring.png +- Images/photo.jpg +- Images/render.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 DC inlet diff --git a/printer_mods/baccula/revo_skirt_nozzle_holder/.metadata.yml b/printer_mods/baccula/revo_skirt_nozzle_holder/.metadata.yml new file mode 100644 index 000000000..3c0f70f3c --- /dev/null +++ b/printer_mods/baccula/revo_skirt_nozzle_holder/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/revo_nozzle_holder.step +- CAD/revo_nozzle_holder.f3d +description: A remix of Andre's design allowing for skirt storage of 4 E3D Revo nozzles + in the skirt of your 350mm v2.4. +images: +- Images/print_open.jpg +- Images/iso_open.png +- Images/iso_closed.png +- Images/print_closed.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Revo Nozzle Holder for v2.4 350 diff --git a/printer_mods/beaugalbraith/Nova_Printhead/.metadata.yml b/printer_mods/beaugalbraith/Nova_Printhead/.metadata.yml new file mode 100644 index 000000000..e286c87d5 --- /dev/null +++ b/printer_mods/beaugalbraith/Nova_Printhead/.metadata.yml @@ -0,0 +1,16 @@ +cad: [] +description: Use Nova Hotend with Afterburner +images: +- images/IMG_7034.jpg +- images/IMG_7036.jpg +- images/IMG_7083.jpg +- images/printhead_rear-1.png +- images/IMG_7079.jpg +- images/printhead_rear-3.png +- images/printhead_rear-2.png +- images/printhead_front-1.png +- images/printhead_front-2.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Nova Printhead diff --git a/printer_mods/bobbleheed/Filament_Runout/.metadata.yml b/printer_mods/bobbleheed/Filament_Runout/.metadata.yml new file mode 100644 index 000000000..9fa2a51f9 --- /dev/null +++ b/printer_mods/bobbleheed/Filament_Runout/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/Filament_Runout_Housing.f3d +description: Filament runout sensor that replaces the stock bowden retainer +images: +- IMAGES/Switch_Cross_Section.png +- IMAGES/Internal_Assembly.png +- IMAGES/Assembled.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: Filament Runout Sensor diff --git a/printer_mods/bobbleheed/Magnetic_Panels/.metadata.yml b/printer_mods/bobbleheed/Magnetic_Panels/.metadata.yml new file mode 100644 index 000000000..0937fa12b --- /dev/null +++ b/printer_mods/bobbleheed/Magnetic_Panels/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/Magnetic_Panel_Midspan_Clips_6mm.f3d +- CAD/Magnetic_Panel_Corner_Clips_6mm.f3d +description: Magnetic clips to allow for easy removal and installation of panels +images: +- IMAGES/Mount_Assembly.png +- IMAGES/Final_Assembly.png +- IMAGES/Cap_Assembly.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Magnetic Panels diff --git a/printer_mods/btp/Galileo_Switchwire_Chain_Mount/.metadata.yml b/printer_mods/btp/Galileo_Switchwire_Chain_Mount/.metadata.yml new file mode 100644 index 000000000..1a4d87c5b --- /dev/null +++ b/printer_mods/btp/Galileo_Switchwire_Chain_Mount/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Modified chain mount position to cater for difference with Galileo Clockwork +images: +- switchwire chain.jpeg +mod_version: 1 +printer_compatibility: +- VSW +title: Galileo chain mount (befenybay) diff --git a/printer_mods/buzzdalf/connector_cover/.metadata.yml b/printer_mods/buzzdalf/connector_cover/.metadata.yml new file mode 100644 index 000000000..14ae354e8 --- /dev/null +++ b/printer_mods/buzzdalf/connector_cover/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: v1.8/2.4 Connector cover for 42STH20-1004AS +images: +- connector_cover_1.jpg +- connector_cover_2.jpg +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: v1.8/2.4 Afterburner connector cover for 42STH20-1004AS diff --git a/printer_mods/buzzdalf/ender_switchwire_taller_z/.metadata.yml b/printer_mods/buzzdalf/ender_switchwire_taller_z/.metadata.yml new file mode 100644 index 000000000..83b0c403b --- /dev/null +++ b/printer_mods/buzzdalf/ender_switchwire_taller_z/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- CAD/bowden_guide.f3d +- CAD/left_front.f3d +- CAD/right_front.f3d +- CAD/left_rear.f3d +- CAD/right_rear.f3d +description: Taller Z Mod +images: +- IMAGES/tall_z_front.PNG +- IMAGES/tall_z_rear.PNG +- IMAGES/picture.jpg +mod_version: 1 +printer_compatibility: +- VSW +title: Ender 3 Switchwire Taller Z Mod diff --git a/printer_mods/buzzdalf/ytension/.metadata.yml b/printer_mods/buzzdalf/ytension/.metadata.yml new file mode 100644 index 000000000..b51c867e6 --- /dev/null +++ b/printer_mods/buzzdalf/ytension/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/y_tension.f3d +description: Y Tension Mod +images: +- IMAGES/parts.jpg +- IMAGES/assembled.jpg +- IMAGES/stack.jpg +- IMAGES/installed.jpg +mod_version: 1 +printer_compatibility: +- VSW +title: Ender 3 Switchwire Y Tensioner Mod diff --git a/printer_mods/bythorsthunder/MGN9_Backers/.metadata.yml b/printer_mods/bythorsthunder/MGN9_Backers/.metadata.yml new file mode 100644 index 000000000..7c3ce68b2 --- /dev/null +++ b/printer_mods/bythorsthunder/MGN9_Backers/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/2.4r2_mgn9_backer.step +description: New idler uppers for MGN9 Extrusion backers +images: +- IMAGES/Updated_Cable_Bridge.jpg +- IMAGES/Cad_Photo.jpg +- IMAGES/Installation.jpg +- IMAGES/Cad_Photo_2.jpg +- IMAGES/Installed.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: MGN9 Backers Idlers diff --git a/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf/.metadata.yml b/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf/.metadata.yml new file mode 100644 index 000000000..4730fcc19 --- /dev/null +++ b/printer_mods/bythorsthunder/Stealthburner_Rapido_Uhf/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/Stealth_Rapido_UHF.step +description: Stealthburner mod for Rapido UHF +images: +- IMAGES/Stealth_UHF_Side.jpg +- IMAGES/Stealth_UHF.jpg +- IMAGES/Stealth_UHF_Photo_Front.JPG +mod_version: 1 +printer_compatibility: +- V2.4 +- VSW +- VT +title: Stealthburner Rapido UHF diff --git a/printer_mods/chirpy/NozzleWiper/.metadata.yml b/printer_mods/chirpy/NozzleWiper/.metadata.yml new file mode 100644 index 000000000..7c31d0598 --- /dev/null +++ b/printer_mods/chirpy/NozzleWiper/.metadata.yml @@ -0,0 +1,22 @@ +cad: +- CAD/NozzleWiper.step +description: Servo powered nozzle wiper and purge bucket +images: +- images/brush.jpg +- images/fullyopen.jpg +- images/armtobrushmount.jpg +- images/armassembly.jpg +- images/mounted.jpg +- images/completed.jpg +- images/parts.jpg +- images/brushholder.jpg +- images/servomounting.jpg +- images/bucket.jpg +- images/armtomount.jpg +- images/NozzleWiper.gif +- images/servosetting.jpg +- images/wireplacement.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 Nozzle Wiper diff --git a/printer_mods/chirpy/RunoutUnklicky/.metadata.yml b/printer_mods/chirpy/RunoutUnklicky/.metadata.yml new file mode 100644 index 000000000..11ce8d1c1 --- /dev/null +++ b/printer_mods/chirpy/RunoutUnklicky/.metadata.yml @@ -0,0 +1,23 @@ +cad: +- CAD/RunoutUnKlicky.step +description: Runout UnKlicky Sensor is a filament runout sensor with mounts for 1515 + and 2020 extrusions +images: +- images/pin.jpg +- images/designall.png +- images/nofilament.jpg +- images/cable.jpg +- images/top.jpg +- images/parts.jpg +- images/designtop.png +- images/filament.jpg +- images/magnets.jpg +- images/assembly.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VSW +- VT +title: Runout UnKlicky Sensor diff --git a/printer_mods/chirpy/TipTophat/.metadata.yml b/printer_mods/chirpy/TipTophat/.metadata.yml new file mode 100644 index 000000000..8e87a67d1 --- /dev/null +++ b/printer_mods/chirpy/TipTophat/.metadata.yml @@ -0,0 +1,27 @@ +cad: +- CAD/TipTophat.step +description: Alternative Tophat design that uses stock panels and raises height by + 30mm +images: +- images/heatinserts.jpg +- images/doorhingefit.jpg +- images/framemagnet.jpg +- images/doorhinge.jpg +- images/doorhandlevhb.jpg +- images/toppanel.jpg +- images/doorhingemount.jpg +- images/tophatside.jpg +- images/tophatclosed.jpg +- images/tophatdoor.jpg +- images/toppanelclips.jpg +- images/doorpanel.jpg +- images/doorhingevhb.jpg +- images/doorhandlemagnet.jpg +- images/doormagnet.jpg +- images/sidepanelclips.jpg +- images/tophatopen.jpg +- images/doorhandlefit.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 Raised Tophat diff --git a/printer_mods/chri.kai.in/20x20mm_Profile_Covers/.metadata.yml b/printer_mods/chri.kai.in/20x20mm_Profile_Covers/.metadata.yml new file mode 100644 index 000000000..5872c1f41 --- /dev/null +++ b/printer_mods/chri.kai.in/20x20mm_Profile_Covers/.metadata.yml @@ -0,0 +1,25 @@ +cad: +- CAD/2020_Profile_Cover.step +- CAD/2020_Stealth_Profile_Cover.step +description: Provide overlapping and flush slot covers for 20x20mm slot6 construction + profiles +images: +- Images/SuperSlicer_Defining_Exact_Profile_Length.png +- Images/SuperSlicer_Deactivating_Linked_Scaling.png +- Images/SuperSlicer_Free_Scaling.png +- Images/V1/2020_Profile_Cover_FrontView.png +- Images/V1/2020_Profile_Cover_3DView.png +- Images/V1/2020_Profile_Cover.png +- Images/V1/2020_Profile_Covers_real.jpg +- Images/V1/2020_Profile_Stealth_Cover.png +- Images/V1/2020_Profile_Stealth_Cover_real.jpg +- Images/V1/2020_Profile_Stealth_Cover_3DView.png +- Images/V1/2020_Profile_Stealth_Cover_FrontView.png +- Images/V1/2020_Profile_Covers.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +- VT +title: 20x20mm Profile Covers diff --git a/printer_mods/chri.kai.in/Angry_CAM_USB/.metadata.yml b/printer_mods/chri.kai.in/Angry_CAM_USB/.metadata.yml new file mode 100644 index 000000000..176ff15c5 --- /dev/null +++ b/printer_mods/chri.kai.in/Angry_CAM_USB/.metadata.yml @@ -0,0 +1,65 @@ +cad: +- CAD/Rear_Cover_120+.step +- CAD/Angry_CAM_Bottom_Mount.step +- CAD/Angry_CAM_Front_Mount.step +- CAD/Front_Cover.step +- CAD/Front_Cover_120+.step +- CAD/Rear_Cover.step +- CAD/Angry_CAM_Top_Mount.step +description: Housing for small USB camera module, allowing mounting to gantry or frame + profiles +images: +- Images/AngryCAM_USB_JST_SH_Connector.png +- Images/ov5648_5mp_usb_camera_a.png +- Images/V1/Camera_Housing_+_Mounts_rear_starboard.png +- Images/V1/Starboard_Mount_-_Cable_Path.png +- Images/V1/AngryCam_USB_Camera_Module.png +- Images/V1/Rear_Cover_Drawing_TopView.png +- Images/V1/Camera_Housing_+_Mounts_front.png +- Images/V1/AngryCAM_USB_Mounting_Rear_Cover.png +- Images/V1/AngryCAM_USB_Closing_the_Rear_Cover.png +- Images/V1/Rear_Cover_TopView.png +- Images/V1/Rear_Cover_BottomView.png +- Images/V1/Camera_Housing_+_Mounts_rear_larboard.png +- Images/V1/AngryCAM_USB_Mounting_Adapter_Cable.png +- Images/V1/AngryCAM_USB_Open_Connector.png +- Images/V1/Camera_Module_+_Mounts_Drawing.png +- Images/V1/Camera_Housing_Cable_Path.png +- Images/V2/Angry_CAM_Front_Mount_Above_Rendered.png +- Images/V2/AngyCAM_USB_V2_Bottom_Mount_Cable_Path_Detail.png +- Images/V2/AngyCAM_USB_V2_Front_Cover_120+_Front.png +- Images/V2/AngryCAM_USB_V2_120+_FrontView_Close.jpg +- Images/V2/AngyCAM_USB_V2_Rear_Cover_Outer_Dimensions.png +- Images/V2/AngyCAM_USB_V2_Rear_Cover_Measurement_Details.png +- Images/V2/AngyCAM_USB_V2_Rear_Cover_Extrusion_Details.png +- Images/V2/AngyCAM_USB_V2_Front_Mount_Front.png +- Images/V2/AngyCAM_USB_V2_Rear_Cover_120+_Front.png +- Images/V2/AngyCAM_USB_V2_Top_Mount_Front_Explosion_Above.png +- Images/V2/AngryCAM_USB_V2_Cable_Route_Mounts.jpg +- Images/V2/AngyCAM_USB_V2_Bottom_Mount_Front_Above.png +- Images/V2/AngryCAM_USB_V2_Front_Cover_FrontView.png +- Images/V2/AngryCAM_USB_V2_Bottom_Mount.png +- Images/V2/AngryCAM_USB_V2_Rear_Cover_FrontView.png +- Images/V2/AngryCAM_USB_V2_Housing_Shell_with_Cable_Path.png +- Images/V2/AngyCAM_USB_V2_Bottom_Mount_Rear.png +- Images/V2/AngyCAM_USB_V2_Bottom_Mount_Front_Below.png +- Images/V2/AngryCAM_USB_V2_Front_Cover_RearView.png +- Images/V2/AngryCAM_USB_V2_Bottom_Mount_with_Cable_Path.png +- Images/V2/AngyCAM_USB_V2_Top_Mount_Front_Above.png +- Images/V2/AngryCAM_USB_V2_Front_Mount_with_Cable_Path.png +- Images/V2/AngryCAM_USB_V2_DePin_with_Pliers.jpg +- Images/V2/AngryCAM_USB_V2_Front_Mount.png +- Images/V2/AngryCAM_USB_V2_120+_FrontView.jpg +- Images/V2/AngyCAM_USB_V2_Rear_Cover_120+_Rear.png +- Images/V2/AngryCAM_USB_V2_Cable_Route_Shell.jpg +- Images/V2/AngryCAM_USB_V2_Top_Mount.png +- Images/V2/AngyCAM_USB_V2_Top_Mount_Rear.png +- Images/V2/5MP_OV5640_Camera_Module_120_View_Angle.jpg +- Images/V2/AngryCAM_USB_V2_120+_RearView.jpg +- Images/V2/AngryCAM_USB_V2_Rear_Cover_RearView.png +- Images/V2/AngyCAM_USB_V2_Bottom_Mount_Explosion_Below.png +- Images/V2/AngyCAM_USB_V2_Front_Cover_120+_Rear.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Angry CAM USB diff --git a/printer_mods/chri.kai.in/Exhaust_Adapter_100mm/.metadata.yml b/printer_mods/chri.kai.in/Exhaust_Adapter_100mm/.metadata.yml new file mode 100644 index 000000000..52285b5d6 --- /dev/null +++ b/printer_mods/chri.kai.in/Exhaust_Adapter_100mm/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/VORON2_v2.4_Exhaust_Adapter_100mm_RC3.step +description: Replace 60mm exhaust fan with 100mm ventilation system adapter +images: +- Images/Exhaust_Adapter_sideview.png +- Images/Exhaust_Adapter_ISO_rendered_bright.png +- Images/Exhaust_Adapter_ISO.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: Exhaust Adapter 100mm diff --git a/printer_mods/chrisrgonzales/270_degree_hinge/.metadata.yml b/printer_mods/chrisrgonzales/270_degree_hinge/.metadata.yml new file mode 100644 index 000000000..16ef1d469 --- /dev/null +++ b/printer_mods/chrisrgonzales/270_degree_hinge/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- CAD/270-Hinge-Parametric.step +- CAD/270-Hinge-Parametric.f3d +description: "Hinges that have 270\xB0 of swivel, parametric CAD included" +images: +- Images/installed-180.jpg +- Images/FacePlate_width.jpg +- Images/installed-0-closed.jpg +- Images/parts.jpg +- Images/installed-close.jpg +- Images/installed-270.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: "270\xB0 Front Panel Hinge" diff --git a/printer_mods/christophmueller/Phaetus_Dragonfly_BMO_Afterburner/.metadata.yml b/printer_mods/christophmueller/Phaetus_Dragonfly_BMO_Afterburner/.metadata.yml new file mode 100644 index 000000000..9ab995637 --- /dev/null +++ b/printer_mods/christophmueller/Phaetus_Dragonfly_BMO_Afterburner/.metadata.yml @@ -0,0 +1,13 @@ +cad: [] +description: Covers both the original Phaetus variant as well as the Zodiac one. +images: +- Dragonfly_BMO_Zodiac.png +- Dragonfly_BMO_Phaetus.png +- back.jpg +- front.jpg +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +title: Phaetus and Zodiac Dragonfly BMO Afterburner toolheads diff --git a/printer_mods/claytono/2.4-extrusion-jig/.metadata.yml b/printer_mods/claytono/2.4-extrusion-jig/.metadata.yml new file mode 100644 index 000000000..9cbf3115c --- /dev/null +++ b/printer_mods/claytono/2.4-extrusion-jig/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- jig.f3d +- jig.step +description: A jig help align extrusions to get a properly square frame +images: +- image.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Voron 2.4 Extrusion Jig diff --git a/printer_mods/claytono/fysetc-s6-v2-mount/.metadata.yml b/printer_mods/claytono/fysetc-s6-v2-mount/.metadata.yml new file mode 100644 index 000000000..45c6973af --- /dev/null +++ b/printer_mods/claytono/fysetc-s6-v2-mount/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- Fysetc_S6_V2_Mount.step +description: DIN Mount for the Fysetc S6 V2 controller +images: +- render.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: Fysetc S6 V2 Mount diff --git a/printer_mods/claytono/v0-zip-tie-skirts/.metadata.yml b/printer_mods/claytono/v0-zip-tie-skirts/.metadata.yml new file mode 100644 index 000000000..7668f1c22 --- /dev/null +++ b/printer_mods/claytono/v0-zip-tie-skirts/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- V0_Zip_Tie_Skirts.f3d +- V0_Zip_Tie_Skirts.step +description: V0 skirts with small loops added along the top to allow zip tyiing cables + to them +images: +- V0_Zip_Tie_Skirts.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Zip Tie Skirts diff --git a/printer_mods/clee/Monster8_heatsert_mount/.metadata.yml b/printer_mods/clee/Monster8_heatsert_mount/.metadata.yml new file mode 100644 index 000000000..cba962edc --- /dev/null +++ b/printer_mods/clee/Monster8_heatsert_mount/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- Monster8_DIN_clip.step +description: DIN mount for Makerbase Monster8 V1/V2 controller +images: +- slicer.png +- example.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: Monster8 DIN Rail Mounts diff --git a/printer_mods/cmrny/v01_motor_panel_no_rub/.metadata.yml b/printer_mods/cmrny/v01_motor_panel_no_rub/.metadata.yml new file mode 100644 index 000000000..a56e42a4f --- /dev/null +++ b/printer_mods/cmrny/v01_motor_panel_no_rub/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- motor_panel_no_rub.f3d +description: V0.1 Motor panel modification to keep umbilical and bowden tube from + rubbing against motor belts +images: +- images/motor_panel_no_rub_installed.jpeg +- images/motor_panel_no_rub.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 Motor Panel Modification diff --git a/printer_mods/conqueror433/Voron_Parts_Logo/.metadata.yml b/printer_mods/conqueror433/Voron_Parts_Logo/.metadata.yml new file mode 100644 index 000000000..3bf90e94a --- /dev/null +++ b/printer_mods/conqueror433/Voron_Parts_Logo/.metadata.yml @@ -0,0 +1,17 @@ +cad: [] +description: Voron Parts Logo for your back panels, 3D Print or Laser Cut +images: +- Voron_Parts_Logo.png +- Voron_Parts_Logo.jpg +- Images/Image_8.jpg +- Images/Image_2.jpg +- Images/Image_3.jpg +- Images/Image_1.jpg +- Images/Image_4.jpg +- Images/Image_5.jpg +- Images/Image_7.jpg +- Images/Image_6.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Voron Parts Logo diff --git a/printer_mods/conqueror433/Voron_V0.1_Parts_Logo/.metadata.yml b/printer_mods/conqueror433/Voron_V0.1_Parts_Logo/.metadata.yml new file mode 100644 index 000000000..81e93898f --- /dev/null +++ b/printer_mods/conqueror433/Voron_V0.1_Parts_Logo/.metadata.yml @@ -0,0 +1,13 @@ +cad: [] +description: Voron Parts Logo for your V0 deck panel +images: +- Voron_V0_Parts_Logo.png +- Voron_V0_Parts_Logo.jpg +- Images/Image_2.jpg +- Images/Image_3.jpg +- Images/Image_1.jpg +- Images/Image_4.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Voron V0.1 Parts Logo diff --git a/printer_mods/consibonsi/Y-Mod_SW_9mm/.metadata.yml b/printer_mods/consibonsi/Y-Mod_SW_9mm/.metadata.yml new file mode 100644 index 000000000..9569f6def --- /dev/null +++ b/printer_mods/consibonsi/Y-Mod_SW_9mm/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: 9mm Y belt mod for SW +images: +- images/image01.jpg +- images/image03.jpg +- images/image02.jpg +mod_version: 1 +printer_compatibility: +- VSW +title: Y-Mod SW 9mm diff --git a/printer_mods/csch0/SW_FanMount_No_Tape/.metadata.yml b/printer_mods/csch0/SW_FanMount_No_Tape/.metadata.yml new file mode 100644 index 000000000..20c65cb75 --- /dev/null +++ b/printer_mods/csch0/SW_FanMount_No_Tape/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: 60x20 Fan Mount for SW without tape +images: +- Images/parts.jpg +- Images/installed.jpg +mod_version: 1 +printer_compatibility: +- VSW +title: SW Fan Mount No Tape diff --git a/printer_mods/d3nny/mains_plug_panel_for_RND_165-00057/.metadata.yml b/printer_mods/d3nny/mains_plug_panel_for_RND_165-00057/.metadata.yml new file mode 100644 index 000000000..53330c255 --- /dev/null +++ b/printer_mods/d3nny/mains_plug_panel_for_RND_165-00057/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: Filtered Power Plug for RND 165-00057 and CAT6-Plug +images: [] +mod_version: 1 +printer_compatibility: +- V2.4 +title: Filtered Power Plug with RND_165-00057 diff --git a/printer_mods/davidauvergne/Center_cable_management_duct/.metadata.yml b/printer_mods/davidauvergne/Center_cable_management_duct/.metadata.yml new file mode 100644 index 000000000..03fadc03a --- /dev/null +++ b/printer_mods/davidauvergne/Center_cable_management_duct/.metadata.yml @@ -0,0 +1,17 @@ +cad: +- CAD/cover_duct_208.f3d +- CAD/reinforced_duct_208_hole.f3d +- CAD/reinforced_duct_208_no_hole.step +- CAD/reinforced_duct_208_hole.step +- CAD/reinforced_duct_208_no_hole.f3d +- CAD/cover_duct_208.step +description: Mod for a centered cable management +images: +- Pictures/IMG_20220226_094626.jpg +- Pictures/IMG_20220226_094653.jpg +- Pictures/IMG_20220301_163247.jpg +- CAD/Capture1.JPG +- CAD/Capture2.JPG +mod_version: 1 +printer_compatibility: [] +title: Center_cable_management_duct diff --git a/printer_mods/dePrintinator/HEPA_Filter_Exhaust/.metadata.yml b/printer_mods/dePrintinator/HEPA_Filter_Exhaust/.metadata.yml new file mode 100644 index 000000000..4fd9d3f17 --- /dev/null +++ b/printer_mods/dePrintinator/HEPA_Filter_Exhaust/.metadata.yml @@ -0,0 +1,14 @@ +cad: [] +description: HEPA filter chamber exhaust replacement. +images: +- Images/exhaust-chamber-mount-jst-terminal.png +- Images/exhaust-fan-assembly.png +- Images/hepa-chamber-exhaust-cad.png +- Images/exhaust-chamber-mount-back.png +- Images/exhaust-HEPA-filter-insert.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: HEPA Exhaust diff --git a/printer_mods/deepfriedheroin/v0_bed_wagos/.metadata.yml b/printer_mods/deepfriedheroin/v0_bed_wagos/.metadata.yml new file mode 100644 index 000000000..8105abc11 --- /dev/null +++ b/printer_mods/deepfriedheroin/v0_bed_wagos/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- cad/v0_bed_wagos.step +- cad/v0_bed_wagos.f3d +description: Easy to install Wago mounts for the v0 +images: +- images/v0_bed_wagos_2x.png +- images/v0_bed_wagos_side_4x.png +- images/v0_bed_wagos_4x.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: v0 Wago Bed Mounts diff --git a/printer_mods/deepfriedheroin/v0_power_wagos/.metadata.yml b/printer_mods/deepfriedheroin/v0_power_wagos/.metadata.yml new file mode 100644 index 000000000..8700d1c3d --- /dev/null +++ b/printer_mods/deepfriedheroin/v0_power_wagos/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- cad/v0_3x3_wago v2.f3d +- cad/v0_3x3_wago v2.step +description: Easy to install Wago mounts for v0 mains +images: +- images/mains_wago_v0_2.jpeg +- images/mains_wago_v0_3.png +- images/mains_wago_v0_1.jpeg +mod_version: 1 +printer_compatibility: +- V0.2 +title: v0 Power Wagos diff --git a/printer_mods/deepfriedheroin/v2_bed_wagos/.metadata.yml b/printer_mods/deepfriedheroin/v2_bed_wagos/.metadata.yml new file mode 100644 index 000000000..343ffd9fc --- /dev/null +++ b/printer_mods/deepfriedheroin/v2_bed_wagos/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- cad/v2_bed_wago.f3d +- cad/v2_bed_wago.step +description: Wire management for the v2 bed +images: +- images/IMG_6724.jpeg +- images/confusing_wiring_diagram.png +- images/cad_image.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: V2 Bed Wagos diff --git a/printer_mods/doubletrouble/V0_Skirt_Mod/.metadata.yml b/printer_mods/doubletrouble/V0_Skirt_Mod/.metadata.yml new file mode 100644 index 000000000..bc27f76e5 --- /dev/null +++ b/printer_mods/doubletrouble/V0_Skirt_Mod/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: V0 Skirt Mod +images: +- Skirt_1.jpg +- Skirt_3.jpg +- Skirt_2.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Skirt Mod diff --git a/printer_mods/eamars/stealthburner_crazy_dragon_toolhead/.metadata.yml b/printer_mods/eamars/stealthburner_crazy_dragon_toolhead/.metadata.yml new file mode 100644 index 000000000..c6edcdd36 --- /dev/null +++ b/printer_mods/eamars/stealthburner_crazy_dragon_toolhead/.metadata.yml @@ -0,0 +1,16 @@ +cad: +- CAD/Stealthburner_Printhead_Crazy_Dragon.step +description: The Stealthburner toolhead mount for Mellow Crazy, TriangleLab T-Volcano + and Phaetus UHF mini +images: +- bottom.PNG +- cut_section.PNG +- back.png +- front.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +- VT +title: Stealthburner (RC1) Dragon Volcano Hotend Toolhead Mount diff --git a/printer_mods/eddie/LED_Bar_Clip/.metadata.yml b/printer_mods/eddie/LED_Bar_Clip/.metadata.yml new file mode 100644 index 000000000..d7a0807c8 --- /dev/null +++ b/printer_mods/eddie/LED_Bar_Clip/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- LED_Bar_Clip_Misumi_version2.step +- LED_Bar_Clip_Misumi_version2.f3d +description: Modular LED Clip for mounting LED Strip to 2020 Extrusions +images: [] +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: LED Bar Clip diff --git a/printer_mods/eddie/V1.8_12mm_Z_Mod/.metadata.yml b/printer_mods/eddie/V1.8_12mm_Z_Mod/.metadata.yml new file mode 100644 index 000000000..a8e59e456 --- /dev/null +++ b/printer_mods/eddie/V1.8_12mm_Z_Mod/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/Z_Shaft_Assembly_12mm v8.f3d +- CAD/Z_Shaft_Assembly_12mm v8.step +description: Add V1.8 option for 12mm Z rods +images: +- Images/Top_View.png +- Images/Cross_Section.png +- Images/12mm_Z_Mod.png +mod_version: 1 +printer_compatibility: +- V1.8 +title: V1.8 12mm Z Mod diff --git a/printer_mods/edwardyeeks/Tridentified_V2.4_Power_Inlet/.metadata.yml b/printer_mods/edwardyeeks/Tridentified_V2.4_Power_Inlet/.metadata.yml new file mode 100644 index 000000000..a6cc75d59 --- /dev/null +++ b/printer_mods/edwardyeeks/Tridentified_V2.4_Power_Inlet/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Trident style side power inlet for V2.4 using Z Drive Motor Tensioner + Mod - By @Amarpal89 +images: +- images/Model.png +- images/db.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Tridentified V2.4 Power Inlet diff --git a/printer_mods/elcrni/Trident_Internal_Spool_Holder/.metadata.yml b/printer_mods/elcrni/Trident_Internal_Spool_Holder/.metadata.yml new file mode 100644 index 000000000..31dfd0029 --- /dev/null +++ b/printer_mods/elcrni/Trident_Internal_Spool_Holder/.metadata.yml @@ -0,0 +1,16 @@ +cad: +- CAD/Trident_internal_spool_holder_001 v32.step +description: Internal spool holder for 300 and 350 Tridents. Supports full size 1kg + spool +images: +- Images/TISP.jpg +- Images/4.jpg +- Images/5.jpg +- Images/6.jpg +- Images/2.jpg +- Images/3.jpg +- Images/1.jpg +mod_version: 1 +printer_compatibility: +- VT +title: Trident Internal Spool Holder diff --git a/printer_mods/elcrni/V2.4-Trident-Spool-Holders/.metadata.yml b/printer_mods/elcrni/V2.4-Trident-Spool-Holders/.metadata.yml new file mode 100644 index 000000000..485ffc003 --- /dev/null +++ b/printer_mods/elcrni/V2.4-Trident-Spool-Holders/.metadata.yml @@ -0,0 +1,15 @@ +cad: [] +description: Spool holder that mounts on top for "too close to the wall" printers +images: +- Images/4.png +- Images/5.png +- Images/6.png +- Images/2.png +- Images/3.png +- Images/1.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: V.24/Trident Spool Holder diff --git a/printer_mods/evandepol/Crydom-GN-Guard/.metadata.yml b/printer_mods/evandepol/Crydom-GN-Guard/.metadata.yml new file mode 100644 index 000000000..f05016f32 --- /dev/null +++ b/printer_mods/evandepol/Crydom-GN-Guard/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: A simple safety guard for the terminals on a Crydom GN SSR +images: +- Images/guard.png +- Images/installed.jpg +- CAD/lightning.svg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Crydom GN Terminal Guard diff --git a/printer_mods/evandepol/Voron2.4-Cable-clamps/.metadata.yml b/printer_mods/evandepol/Voron2.4-Cable-clamps/.metadata.yml new file mode 100644 index 000000000..4921555c1 --- /dev/null +++ b/printer_mods/evandepol/Voron2.4-Cable-clamps/.metadata.yml @@ -0,0 +1,14 @@ +cad: [] +description: A set of 2020-mounted cable guards to organize and dress the wiring on + your build +images: +- Images/edge-clamp.png +- Images/combination.png +- Images/annotated.jpg +- Images/cable-mount.png +- Images/dressed.jpg +- Images/detail.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Voron 2.4 cable clamps diff --git a/printer_mods/falo/lgx_lite_side_can/.metadata.yml b/printer_mods/falo/lgx_lite_side_can/.metadata.yml new file mode 100644 index 000000000..11fc65689 --- /dev/null +++ b/printer_mods/falo/lgx_lite_side_can/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/lgx_lite_side_can_mount.step +description: A side mounting for a CAN board (Huvud/SHT42) to the LGX Lite +images: +- Images/image.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +- VT +title: LGX Lite CAN Side Mount diff --git a/printer_mods/falo/magnetic_grill_cover/.metadata.yml b/printer_mods/falo/magnetic_grill_cover/.metadata.yml new file mode 100644 index 000000000..09bc96570 --- /dev/null +++ b/printer_mods/falo/magnetic_grill_cover/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/MagneticExhaustGrillCover.f3d +- CAD/MagneticExhaustGrillCover.step +description: A magnetic cover to seal the filtered exhaust +images: +- Images/render_back.png +- Images/render_front.png +- Images/foam_install.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Magnetic Exhaust Grill Cover diff --git a/printer_mods/falo/toolhead_pcb_to_can/.metadata.yml b/printer_mods/falo/toolhead_pcb_to_can/.metadata.yml new file mode 100644 index 000000000..414353106 --- /dev/null +++ b/printer_mods/falo/toolhead_pcb_to_can/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/ToolheadPCBtoCANAdapter.step +description: A mount to enable side mounting of a CAN board (Huvud/SHT42) in Afterburner + PCB spacing +images: +- Images/image.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +- VT +title: Toolhead PCB to CAN Mount Adaptor diff --git a/printer_mods/filotto78/6mm_slot_cover/.metadata.yml b/printer_mods/filotto78/6mm_slot_cover/.metadata.yml new file mode 100644 index 000000000..4f59a4e89 --- /dev/null +++ b/printer_mods/filotto78/6mm_slot_cover/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/2020_cover_one_side.f3d +- CAD/2020_cover_simmetric.f3d +description: Simple cover for extrusion with 6mm slot width +images: +- images/IMG_3238.jpeg +- images/IMG_3239.jpeg +- images/symmetric.jpg +- images/one_side.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: 6mm slot cover diff --git a/printer_mods/gamebofh/door-panels/.metadata.yml b/printer_mods/gamebofh/door-panels/.metadata.yml new file mode 100644 index 000000000..435c80c7e --- /dev/null +++ b/printer_mods/gamebofh/door-panels/.metadata.yml @@ -0,0 +1,16 @@ +cad: +- CAD/door-panel-holes.f3d +- CAD/door-panel-holes.step +- CAD/modified-door-latch.f3d +description: Files to allow you to create laser cut door panels with some ability + to adjust +images: +- Images/save-as-dxf.png +- Images/door-latch-installed.jpg +- Images/door-hinge-lined-up.jpg +- Images/door-fusion-screenshot.png +- Images/door-hinge-installed.jpg +mod_version: 1 +printer_compatibility: +- VSW +title: Laser cut door panels diff --git a/printer_mods/gauravmm/crazy_mozzie_cw2/.metadata.yml b/printer_mods/gauravmm/crazy_mozzie_cw2/.metadata.yml new file mode 100644 index 000000000..84e046fcd --- /dev/null +++ b/printer_mods/gauravmm/crazy_mozzie_cw2/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- STEP/Stealthburner_Printhead_Crazy_Mozzie.step +description: Toolhead for Crazy Mozzie HF, compatible with Stealthburner and Clockwork + 2 +images: +- images/pic2.jpg +- images/render.png +- images/pic.jpg +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +- VT +title: Crazy Mozzie HF toolhead SB+CW2 diff --git a/printer_mods/gen2eng/z_carriage_stop_pass_through/.metadata.yml b/printer_mods/gen2eng/z_carriage_stop_pass_through/.metadata.yml new file mode 100644 index 000000000..735555a4a --- /dev/null +++ b/printer_mods/gen2eng/z_carriage_stop_pass_through/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Z Carriage Stop modification that makes pass through of wires for the + LED light bar clean and easy +images: +- Images/z_carriage_stop_pass_through.png +- Images/z_carriage_stop_photo.png +mod_version: 1 +printer_compatibility: +- VSW +title: Switchwire LED wire pass through diff --git a/printer_mods/geoffreyyoung/dual_rail_guide/.metadata.yml b/printer_mods/geoffreyyoung/dual_rail_guide/.metadata.yml new file mode 100644 index 000000000..bdf39ace1 --- /dev/null +++ b/printer_mods/geoffreyyoung/dual_rail_guide/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Rail installation guide that also works for the 2.4 dual rail installation +images: +- images/guide.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Dual Rail Installation Guide diff --git a/printer_mods/geoffreyyoung/lgx/.metadata.yml b/printer_mods/geoffreyyoung/lgx/.metadata.yml new file mode 100644 index 000000000..10d8a5094 --- /dev/null +++ b/printer_mods/geoffreyyoung/lgx/.metadata.yml @@ -0,0 +1,16 @@ +cad: [] +description: Useful information and models for using the Bondtech LGX extruder wth + Afterburner +images: +- images/cable_cover.jpg +- images/lever_cover.jpg +- images/mgn12-rear.jpg +- images/gear_cover.jpg +- images/wires.jpg +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +- VT +title: LGX Info, Links, and Models diff --git a/printer_mods/geoffreyyoung/spider_bracket/.metadata.yml b/printer_mods/geoffreyyoung/spider_bracket/.metadata.yml new file mode 100644 index 000000000..023148906 --- /dev/null +++ b/printer_mods/geoffreyyoung/spider_bracket/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: FYSETC SPIDER DIN Bracket +images: [] +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: FYSETC SPIDER DIN Bracket diff --git a/printer_mods/gerritwellen/manta-m8p-bracket/.metadata.yml b/printer_mods/gerritwellen/manta-m8p-bracket/.metadata.yml new file mode 100644 index 000000000..e274965e7 --- /dev/null +++ b/printer_mods/gerritwellen/manta-m8p-bracket/.metadata.yml @@ -0,0 +1,9 @@ +cad: +- Manta-M8P_Bracket.step +description: Mounting Bracket for BTT Manta M8P +images: [] +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: Manta M8P Mount diff --git a/printer_mods/golas/v0-extended-tophat-hinge/.metadata.yml b/printer_mods/golas/v0-extended-tophat-hinge/.metadata.yml new file mode 100644 index 000000000..7780f7de6 --- /dev/null +++ b/printer_mods/golas/v0-extended-tophat-hinge/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- cad/v0.1_tophat_extended.step +description: Extended tophat for v0.1 with hinges (integrated or screwed ones). +images: +- images/tophat-front.png +- images/tophat_render.png +- images/tophat-side.png +- images/tophat-closed.png +- images/v01-remixed-render.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 Extended tophat hinge diff --git a/printer_mods/golas/v0-trident-skirt-mix/.metadata.yml b/printer_mods/golas/v0-trident-skirt-mix/.metadata.yml new file mode 100644 index 000000000..2f6ea11fc --- /dev/null +++ b/printer_mods/golas/v0-trident-skirt-mix/.metadata.yml @@ -0,0 +1,23 @@ +cad: +- cad/v0.1_trident_skirt_remix.step +description: Trident style v0.1 skirt mix with 12864 Mini Lcd on front or plain skirt. +images: +- images/bottom-view.png +- images/lcd_cover_back_view.png +- images/lcd_back_to_connector.png +- images/corner-view.png +- images/connector.png +- images/skirt_screw_1.png +- images/v0.1_trident_skirt_remix_render.png +- images/revnull2.jpg +- images/skirt_screw_2.png +- images/connector_and_plate.png +- images/revnull1.jpg +- images/lcd_cover.png +- images/central_mount_plate.png +- images/lcd_back_to_connector_side_view.png +- images/v01-remixed-render.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 Trident skirt remix with 12864 LCD diff --git a/printer_mods/hartk1213/Voron0.2_2.8_WaveshareDisplay/.metadata.yml b/printer_mods/hartk1213/Voron0.2_2.8_WaveshareDisplay/.metadata.yml new file mode 100644 index 000000000..d3a9c52a3 --- /dev/null +++ b/printer_mods/hartk1213/Voron0.2_2.8_WaveshareDisplay/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/V02-28Waveshare.f3d +- CAD/V02-28Waveshare.step +description: 2.8 Waveshare display for V0.2 +images: +- Images/WaveshareSkirtMount.png +- Images/2.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: Voron0.2 2.8 Waveshare Display diff --git a/printer_mods/hartk1213/Voron0.2_Rear_Keystone_Skirt/.metadata.yml b/printer_mods/hartk1213/Voron0.2_Rear_Keystone_Skirt/.metadata.yml new file mode 100644 index 000000000..48bdf99cd --- /dev/null +++ b/printer_mods/hartk1213/Voron0.2_Rear_Keystone_Skirt/.metadata.yml @@ -0,0 +1,9 @@ +cad: +- CAD/v02_rear_skirt_keystone.step +description: Added keystone slot on rear skirt for V0.2 +images: +- Images/1.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: Voron0.2 Rear Keystone Skirt diff --git a/printer_mods/hartk1213/Voron0_C14Inlet/.metadata.yml b/printer_mods/hartk1213/Voron0_C14Inlet/.metadata.yml new file mode 100644 index 000000000..c63b47449 --- /dev/null +++ b/printer_mods/hartk1213/Voron0_C14Inlet/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/Voron0_PowerInlet .f3d +description: Added a new Power inlet that uses a Fused C14 plug and switch that covers + the mains contacts +images: +- Images/2.jpg +- Images/3.jpg +- Images/1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Voron0 C14Inlet diff --git a/printer_mods/hartk1213/Voron0_ExtendedLegs/.metadata.yml b/printer_mods/hartk1213/Voron0_ExtendedLegs/.metadata.yml new file mode 100644 index 000000000..2d64f9d6e --- /dev/null +++ b/printer_mods/hartk1213/Voron0_ExtendedLegs/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: New extended legs to raise the printer up a tiny bit more +images: +- Images/1.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Voron0 ExtendedLegs diff --git a/printer_mods/hartk1213/Voron0_ExtrusionSkirt/.metadata.yml b/printer_mods/hartk1213/Voron0_ExtrusionSkirt/.metadata.yml new file mode 100644 index 000000000..46732182e --- /dev/null +++ b/printer_mods/hartk1213/Voron0_ExtrusionSkirt/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: Created a new skirt design that uses 50mm extrusions as legs and it has + a c14 power inlet hole on the bottom +images: +- Images/1.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: Voron0 ExtrusionSkirt diff --git a/printer_mods/hartk1213/Voron0_Hinged_Top_Hat/.metadata.yml b/printer_mods/hartk1213/Voron0_Hinged_Top_Hat/.metadata.yml new file mode 100644 index 000000000..9bb589bbe --- /dev/null +++ b/printer_mods/hartk1213/Voron0_Hinged_Top_Hat/.metadata.yml @@ -0,0 +1,24 @@ +cad: +- CAD/v0_Hinged_TopHat.step +description: Created a new hinged top hat design for the V0 so it can fold away when + you dont want a top hat on +images: +- Images/4.jpg +- Images/2.jpg +- Images/3.jpg +- Images/1.jpg +- Images/Assembly/step5.png +- Images/Assembly/step4.png +- Images/Assembly/step6.png +- Images/Assembly/step7.png +- Images/Assembly/step3.png +- Images/Assembly/step2.png +- Images/Assembly/step1.png +- Images/Assembly/FinalAssembly.png +- Images/Assembly/step10.png +- Images/Assembly/step9.png +- Images/Assembly/step8.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: Voron0 Hinged Top Hat diff --git a/printer_mods/hartk1213/Voron0_MGN9C_X_Axis/.metadata.yml b/printer_mods/hartk1213/Voron0_MGN9C_X_Axis/.metadata.yml new file mode 100644 index 000000000..c1291e7e0 --- /dev/null +++ b/printer_mods/hartk1213/Voron0_MGN9C_X_Axis/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- CAD/MGN9C-V0.step +description: This mod, replaces the stock MGN7H for MGN9C on the V0 +images: +- Images/x_axis.png +- Images/carraige.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: Voron0 MGN9C X Axis diff --git a/printer_mods/hartk1213/Voron0_deck_panel_with_logo_and_VORON0/.metadata.yml b/printer_mods/hartk1213/Voron0_deck_panel_with_logo_and_VORON0/.metadata.yml new file mode 100644 index 000000000..63ee59df5 --- /dev/null +++ b/printer_mods/hartk1213/Voron0_deck_panel_with_logo_and_VORON0/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Used @Kruppes blank deck panel to add the logo as well as the name VORON0 +images: +- Images/deck_panel_printed.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Voron0 deck panel diff --git a/printer_mods/hartk1213/Voron0_display_dualcolor/.metadata.yml b/printer_mods/hartk1213/Voron0_display_dualcolor/.metadata.yml new file mode 100644 index 000000000..f73176313 --- /dev/null +++ b/printer_mods/hartk1213/Voron0_display_dualcolor/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Added a dual color file for the Voron Display Front housing +images: +- Images/display.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Voron0 display dualcolor diff --git a/printer_mods/hartk1213/Voron2.4_GE5C/.metadata.yml b/printer_mods/hartk1213/Voron2.4_GE5C/.metadata.yml new file mode 100644 index 000000000..e37cc186f --- /dev/null +++ b/printer_mods/hartk1213/Voron2.4_GE5C/.metadata.yml @@ -0,0 +1,16 @@ +cad: +- CAD/GE5C.step +description: This mod replaces the stack of printed z joints with a metal spherical + bearing +images: +- Images/4.png +- Images/5.png +- Images/7.png +- Images/6.png +- Images/2.png +- Images/3.png +- Images/1.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Voron2.4 GE5C diff --git a/printer_mods/hartk1213/Voron2.4_SexBolt_ZEndstop/.metadata.yml b/printer_mods/hartk1213/Voron2.4_SexBolt_ZEndstop/.metadata.yml new file mode 100644 index 000000000..d48863ab2 --- /dev/null +++ b/printer_mods/hartk1213/Voron2.4_SexBolt_ZEndstop/.metadata.yml @@ -0,0 +1,18 @@ +cad: +- CAD/V2_SexBolt_Z_Endstop.step +description: This mod replaces stock V2 Z endstop with a different style +images: +- Images/8.png +- Images/9.png +- Images/4.png +- Images/5.png +- Images/7.png +- Images/6.png +- Images/2.png +- Images/3.png +- Images/1.png +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: Voron2.4 SexBolt ZEndstop diff --git a/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/.metadata.yml b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/.metadata.yml new file mode 100644 index 000000000..cbba25691 --- /dev/null +++ b/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod/.metadata.yml @@ -0,0 +1,30 @@ +cad: +- CAD/Z_Idlers/z_Idler_pinned.step +- CAD/Gantry/V24R2_Gantry_PinsMod.step +- CAD/Gantry/TridentR1_Gantry_PinsMod.step +- CAD/Gantry/Front_Idlers/[a]_tensioner_right_pinned.step +- CAD/Gantry/Front_Idlers/[a]_tensioner_left_pinned.step +- CAD/Gantry/X_Axis/XY_Joints/xy_joint_right_pinned.step +- CAD/Gantry/X_Axis/XY_Joints/xy_joint_left_pinned.step +- CAD/Gantry/AB_Drive_Units/a_drive_frame_upper_pinned.step +- CAD/Gantry/AB_Drive_Units/a_drive_frame_lower_pinned.step +- CAD/Gantry/AB_Drive_Units/b_drive_frame_lower_pinned.step +- CAD/Gantry/AB_Drive_Units/b_drive_frame_upper_pinned.step +description: This mod replaces all the M5 screws for all idlers/pulleys/bearings with + 5mm pins +images: +- Images/z.jpg +- Images/4.png +- Images/2.jpg +- Images/2.png +- Images/3.png +- Images/1.jpg +- Images/ADrive/4.png +- Images/ADrive/2.png +- Images/ADrive/3.png +- Images/ADrive/1.png +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: Voron2.4 and Trident Pins Mod diff --git a/printer_mods/hartk1213/Voron2.4_Y_Endstop_Relocation/.metadata.yml b/printer_mods/hartk1213/Voron2.4_Y_Endstop_Relocation/.metadata.yml new file mode 100644 index 000000000..516b8d724 --- /dev/null +++ b/printer_mods/hartk1213/Voron2.4_Y_Endstop_Relocation/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/Gantry/X_Axis/X_Carriage/MGN12Umblilcal.step +- CAD/Gantry/AB_Drive_Units/a_drive_frame_upper_with_endstop_pinned.step +- CAD/Gantry/AB_Drive_Units/a_drive_frame_upper_with_endstop.step +description: This mod relocates the Y endstop to the top A drive piece +images: +- Images/4.png +- Images/2.png +- Images/3.png +- Images/1.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Voron2.4 Y Endstop Relocation diff --git a/printer_mods/henrikssn/parametric_spool_holder/.metadata.yml b/printer_mods/henrikssn/parametric_spool_holder/.metadata.yml new file mode 100644 index 000000000..6e42c648a --- /dev/null +++ b/printer_mods/henrikssn/parametric_spool_holder/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- Parametric_Spool_Holder_v4.f3d +description: Spool holder where the length is a parameter. +images: [] +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: Parametric Spool Holder diff --git a/printer_mods/henrikssn/plug_panel_generic/.metadata.yml b/printer_mods/henrikssn/plug_panel_generic/.metadata.yml new file mode 100644 index 000000000..c1f54941c --- /dev/null +++ b/printer_mods/henrikssn/plug_panel_generic/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: v2.4 plug panel for generic unfiltered modules with 66mm x 27mm cutout + such as the Delta 06A2 and Qualtek 761-18 +images: +- Images/1.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Plug Panel Mod for Generic Unfiltered Modules diff --git a/printer_mods/hergtoler/exhaust_120mm_duct/.metadata.yml b/printer_mods/hergtoler/exhaust_120mm_duct/.metadata.yml new file mode 100644 index 000000000..fb58b4a97 --- /dev/null +++ b/printer_mods/hergtoler/exhaust_120mm_duct/.metadata.yml @@ -0,0 +1,17 @@ +cad: [] +description: v2.4 Exhaust Housing for 120mm Fan and 4in Duct +images: +- images/step5.png +- images/step4.png +- images/step6.png +- images/fan_mount_inserts.png +- images/step3.png +- images/step2.png +- images/step1.png +- images/housing_inserts.png +- images/exhaust_120mm_installed.jpg +- images/exhaust_120mm_assembly.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Exhaust Housing for 120mm Fan and 4in Duct diff --git a/printer_mods/hernsl/bottom_panel_mag_clip/.metadata.yml b/printer_mods/hernsl/bottom_panel_mag_clip/.metadata.yml new file mode 100644 index 000000000..7fb4c7477 --- /dev/null +++ b/printer_mods/hernsl/bottom_panel_mag_clip/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: v2.4 magnetic clips to retain bottom panel +images: +- bottom_panel_maghold_panel.jpg +- bottom_panel_maghold_skirt.jpg +- bottom_panel_maghold.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Bottom Panel Mag Clip diff --git a/printer_mods/hhammarstrand/afterburner_connector_cover_42STH20-1004AS/.metadata.yml b/printer_mods/hhammarstrand/afterburner_connector_cover_42STH20-1004AS/.metadata.yml new file mode 100644 index 000000000..38f37468b --- /dev/null +++ b/printer_mods/hhammarstrand/afterburner_connector_cover_42STH20-1004AS/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: Connector cover for 42STH20-1004AS +images: +- exodius_afterburner.jpg +- compare.png +mod_version: 1 +printer_compatibility: +- VSW +title: Afterburner connector cover for 42STH20-1004AS diff --git a/printer_mods/hijax_pl/corner_panel_clip/.metadata.yml b/printer_mods/hijax_pl/corner_panel_clip/.metadata.yml new file mode 100644 index 000000000..3fd0f89d5 --- /dev/null +++ b/printer_mods/hijax_pl/corner_panel_clip/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: V2 panel corner frames using 3-way L brackets in the corners +images: [] +mod_version: 1 +printer_compatibility: +- V2.4 +title: Corner panel clip diff --git a/printer_mods/hijax_pl/din_rail_mount/.metadata.yml b/printer_mods/hijax_pl/din_rail_mount/.metadata.yml new file mode 100644 index 000000000..49ecdbbe8 --- /dev/null +++ b/printer_mods/hijax_pl/din_rail_mount/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- din_rail_mount.step +- din_rail_mount_angle_panel.step +description: Adapter to attach DIN Rail to 2020 extrusion. +images: +- din_rail_mount.png +- din_rail_mount_angle.png +- din_rail_mount_angle_panel.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Din Rail mount diff --git a/printer_mods/hijax_pl/ender_compatible_controller_mount/.metadata.yml b/printer_mods/hijax_pl/ender_compatible_controller_mount/.metadata.yml new file mode 100644 index 000000000..ba24ee868 --- /dev/null +++ b/printer_mods/hijax_pl/ender_compatible_controller_mount/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: DIN (rotated) and legacy adapters for boards like SKR mini E3. +images: [] +mod_version: 1 +printer_compatibility: +- V2.4 +title: Controler Board adapters diff --git a/printer_mods/hoschi/FYSETC_Spider_DIN_Mount/.metadata.yml b/printer_mods/hoschi/FYSETC_Spider_DIN_Mount/.metadata.yml new file mode 100644 index 000000000..93051d507 --- /dev/null +++ b/printer_mods/hoschi/FYSETC_Spider_DIN_Mount/.metadata.yml @@ -0,0 +1,17 @@ +cad: +- STEP/spider_bracket_vertical_usb.step +- STEP/spider_bracket_horizontal_usb.step +- STEP/spider_bracket_horizontal_terminal.step +- STEP/spider_bracket_vertical_terminal.step +- STEP/spider.spacer.step +description: DIN rail mount for FYSETC Spider +images: +- IMG/spacer.jpg +- IMG/bracket.jpg +- IMG/spacers.jpg +- IMG/main.jpg +- IMG/horizontal.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: FYSETC Spider DIN Rail Mount diff --git a/printer_mods/hymness1/10x11mm_chain_VSW/.metadata.yml b/printer_mods/hymness1/10x11mm_chain_VSW/.metadata.yml new file mode 100644 index 000000000..0b4855fd0 --- /dev/null +++ b/printer_mods/hymness1/10x11mm_chain_VSW/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Printable and openable 10x11mm chain +images: +- Pictures/10x11mm_chains_open.jpg +- Pictures/10x11mm_chains_closed.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +- VSW +title: 10x11mm chain VSW diff --git a/printer_mods/hymness1/Quickdraw_probe_Voron_Switchwire/.metadata.yml b/printer_mods/hymness1/Quickdraw_probe_Voron_Switchwire/.metadata.yml new file mode 100644 index 000000000..9a40ad31c --- /dev/null +++ b/printer_mods/hymness1/Quickdraw_probe_Voron_Switchwire/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/Quickdraw_for_VSW.step +description: Detachable magnetic probe with docking system for VSW +images: +- Pictures/quickdraw_SW_remix.png +- Pictures/quickdraw_SW_probe.png +- Pictures/SW_Y_travel.png +mod_version: 1 +printer_compatibility: +- VSW +title: Quickdraw probe Voron Switchwire diff --git a/printer_mods/iblue/TophatExtractor/.metadata.yml b/printer_mods/iblue/TophatExtractor/.metadata.yml new file mode 100644 index 000000000..f34d72aa2 --- /dev/null +++ b/printer_mods/iblue/TophatExtractor/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/Tophat-with-Extractor.step +description: Tophat Extractor for the Voron V0.1 with activated charcoal and HEPA + filter +images: +- img/drawing1.png +- img/drawing3.png +- img/drawing2.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 Tophat Extractor diff --git a/printer_mods/jappaj/FanSaver/.metadata.yml b/printer_mods/jappaj/FanSaver/.metadata.yml new file mode 100644 index 000000000..8c1b2f244 --- /dev/null +++ b/printer_mods/jappaj/FanSaver/.metadata.yml @@ -0,0 +1,16 @@ +cad: +- VoronV0.1_FanSaver_rev0.6.step +description: A printable fix for overheating V0.1 blower fans +images: +- photos/Instructions-1.jpg +- photos/Instructions-3.jpg +- photos/Instructions-6.jpg +- photos/Instructions-7.jpg +- photos/FanSaver_ObjectRender.png +- photos/Instructions-2_ARROW.jpg +- photos/FanSaver_Overview.png +- photos/Instructions-4_ARROW.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 FanSaver diff --git a/printer_mods/jasonc/Z_Idler_Shoulder_Bolt/.metadata.yml b/printer_mods/jasonc/Z_Idler_Shoulder_Bolt/.metadata.yml new file mode 100644 index 000000000..ccc269622 --- /dev/null +++ b/printer_mods/jasonc/Z_Idler_Shoulder_Bolt/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Modification to the idler carriers to accept a 25mm shoulder bolt. Ideal + for Gates idlers. +images: +- cross_section.png +- shoulder_bolts_and_prints.jpeg +mod_version: 1 +printer_compatibility: +- V2.4 +title: V2.4 Z-Idler Shoulder Bolt Mod diff --git a/printer_mods/jatson/plug_panel_schurter/.metadata.yml b/printer_mods/jatson/plug_panel_schurter/.metadata.yml new file mode 100644 index 000000000..95fcf5a3e --- /dev/null +++ b/printer_mods/jatson/plug_panel_schurter/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/plug_panel_schurter.step +- CAD/plug_panel_schurter.f3d +description: A modified plug panel for Voron 2.4r1 with Schurter CD44.1101.151 power + entry modul. The panel has a LAN socket as well. +images: +- images/panel_printed.jpg +- images/Schurter-CD14.1101.151.jpg +- images/stl_image.jpg +- images/cad_image.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Plug panel mod for Schurter CD44.1101.151 power entry diff --git a/printer_mods/jaysuk/4.3_fly_screen_mount/.metadata.yml b/printer_mods/jaysuk/4.3_fly_screen_mount/.metadata.yml new file mode 100644 index 000000000..32da9494f --- /dev/null +++ b/printer_mods/jaysuk/4.3_fly_screen_mount/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- CAD/4.3_fly_screen_mount_assembly.STEP +- CAD/4.3_fly_screen_mount.STEP +description: A mount for a 4.3" Fly Screen +images: +- Images/4.3_fly_screen_mount_assembly.JPG +mod_version: 1 +printer_compatibility: +- V0.2 +title: 4.3 Fly Screen Mount diff --git a/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/.metadata.yml b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/.metadata.yml new file mode 100644 index 000000000..f5d4df88c --- /dev/null +++ b/printer_mods/jeoje/4.3_Inch_Touchscreen_Mount/.metadata.yml @@ -0,0 +1,20 @@ +cad: +- CAD/Voron_v2.4_Waveshare_4.3inch_DSI_LCD_Mount.step +description: Mounts a [Waveshare 4.3inch Capacitive Touch Display](https://www.waveshare.com/4.3inch-dsi-lcd.htm) + to v2.4 and Switchwire Vorons +images: +- images/Mounted_1.jpg +- images/CAD_offset_profile.png +- images/Mounted_2.jpg +- images/CAD_front_profile.png +- images/Voron_logo.jpg +- images/CAD_mount_offset_profile.png +- images/Mounted_SW_2.jpg +- images/Mounted_SW_1.jpg +- images/CAD_mount_side_profile_angle.png +- images/CAD_side_profile.png +mod_version: 1 +printer_compatibility: +- V2.4 +- VSW +title: 4.3" Touchscreen Mount diff --git a/printer_mods/jeoje/Molex_MLX_Microfit_Bed_Connector_Mount/.metadata.yml b/printer_mods/jeoje/Molex_MLX_Microfit_Bed_Connector_Mount/.metadata.yml new file mode 100644 index 000000000..02514eff4 --- /dev/null +++ b/printer_mods/jeoje/Molex_MLX_Microfit_Bed_Connector_Mount/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/MLX_MF3_Connector_Mount.step +description: Solid mount your bed connectors +images: +- images/MLX_MF3_Render.png +- images/photo4.jpg +- images/photo2.jpg +- images/photo3.jpg +- images/photo1.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Molex MLX and Microfit 3.0 Bed Connector Mount diff --git a/printer_mods/jeoje/Sturdy_Handles/.metadata.yml b/printer_mods/jeoje/Sturdy_Handles/.metadata.yml new file mode 100644 index 000000000..b8bc0366f --- /dev/null +++ b/printer_mods/jeoje/Sturdy_Handles/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/sturdy_handles.step +- CAD/sturdy_handles.f3d +description: Modified v2.2 handles with no panel rest and with 4 anchor points +images: +- images/side_profile.png +- images/offset_profile.png +- images/photo.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Sturdy Handles diff --git a/printer_mods/jeoje/Z_Chain_Guide_Thermistor_Mount/.metadata.yml b/printer_mods/jeoje/Z_Chain_Guide_Thermistor_Mount/.metadata.yml new file mode 100644 index 000000000..df0581fe1 --- /dev/null +++ b/printer_mods/jeoje/Z_Chain_Guide_Thermistor_Mount/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/Voron_V2.4_Z_Chain_Guide_Thermistor_Mount.step +description: Modifies the Z chain guide to hold a chamber thermistor +images: +- images/render2.png +- images/render1.png +- images/max-z.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: V2.4 Z Chain Guide with Integrated Chamber Thermistor Mount diff --git a/printer_mods/jgehrig/v0_lcdskirt/.metadata.yml b/printer_mods/jgehrig/v0_lcdskirt/.metadata.yml new file mode 100644 index 000000000..082aaa5ec --- /dev/null +++ b/printer_mods/jgehrig/v0_lcdskirt/.metadata.yml @@ -0,0 +1,22 @@ +cad: +- CAD/LCD_Skirt_Assembly.step +description: 3.2" LCD Touch Screen Skirt +images: +- images/Thumbnail_LCD_Face_Plate.png +- images/Gallery_2.jpg +- images/Gallery_1.jpg +- images/Thumbnail_Skirt_Front_Left.png +- images/Fusion_360.png +- images/Thumbnail_Skirt_Side_A.png +- images/Thumbnail_Skirt_Side_B.png +- images/Thumbnail_Foot_Front.png +- images/Thumbnail_Foot_Rear.png +- images/Side_Skirt_B.png +- images/Thumbnail_Skirt_Front_Right.png +- images/Side_Skirt_A.png +- images/Main_Image.jpg +- images/Thumbnail_LCD_Mounting_Bracket.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 LCD Touchscreen Skirt diff --git a/printer_mods/johanncc/Raspberry_Pi_Camera_Mount/.metadata.yml b/printer_mods/johanncc/Raspberry_Pi_Camera_Mount/.metadata.yml new file mode 100644 index 000000000..7f18be0e3 --- /dev/null +++ b/printer_mods/johanncc/Raspberry_Pi_Camera_Mount/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/Raspberry_Pi_Camera_Mount.step +description: Low profile raspberry pi camera mount +images: +- Images/img03.jpg +- Images/img02.png +- Images/img01.jpg +- Images/img05.jpg +- Images/img04.jpg +- Images/img06.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Raspberry Pi Camera Mount diff --git a/printer_mods/joposter/v0_clippable_ledmounts/.metadata.yml b/printer_mods/joposter/v0_clippable_ledmounts/.metadata.yml new file mode 100644 index 000000000..ef3c913e2 --- /dev/null +++ b/printer_mods/joposter/v0_clippable_ledmounts/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/led_mount_clippable.step +description: LED Case light for the V0 that clips into the extrusions +images: +- images/slicer_brim.jpg +- images/printer_installed.jpg +- images/cob_led.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Clippable LED Caselight diff --git a/printer_mods/kageurufu/mgn12-euclid/.metadata.yml b/printer_mods/kageurufu/mgn12-euclid/.metadata.yml new file mode 100644 index 000000000..995170bb1 --- /dev/null +++ b/printer_mods/kageurufu/mgn12-euclid/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/trident-euclid-carriage.step +description: A MGN-12 carriage with an inset mount for a Euclid Probe +images: +- Images/real-bottomview.jpg +- Images/real-frontview.jpg +- Images/CAD-bottomview.png +- Images/CAD-frontview.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: Euclid Probe Carriage diff --git a/printer_mods/khay/V2-200_4020_Electronics_Fan/.metadata.yml b/printer_mods/khay/V2-200_4020_Electronics_Fan/.metadata.yml new file mode 100644 index 000000000..191c19bde --- /dev/null +++ b/printer_mods/khay/V2-200_4020_Electronics_Fan/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: "Middle Skirt for V2-200mm\xB2 Electronics Compartment" +images: +- Img/DSC_3249.JPG +- Img/DSC_3249_kl.jpg +- Img/DSC_3250.JPG +mod_version: 1 +printer_compatibility: +- V2.4 +title: "Fan for V2-200mm\xB2" diff --git a/printer_mods/khay/V2_3x_Keystone_Plugpanel/.metadata.yml b/printer_mods/khay/V2_3x_Keystone_Plugpanel/.metadata.yml new file mode 100644 index 000000000..a576d8da4 --- /dev/null +++ b/printer_mods/khay/V2_3x_Keystone_Plugpanel/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: PlugPanel with Options for 3 Keystones +images: +- Img/Plug_Panel_CAD.png +- Img/DSC_3253.JPG +mod_version: 1 +printer_compatibility: +- V2.4 +title: 3x Keystone PlugPanel diff --git a/printer_mods/khay/micro_backplate/.metadata.yml b/printer_mods/khay/micro_backplate/.metadata.yml new file mode 100644 index 000000000..f380a1646 --- /dev/null +++ b/printer_mods/khay/micro_backplate/.metadata.yml @@ -0,0 +1,12 @@ +cad: [] +description: Minimalistic backplate for cooler motors and electronics +images: +- img/DSC_2960.JPG +- img/DSC_2959.jpg +- img/Slicer_pic.png +- img/CAD_pic.jpg +- img/DSC_2957.JPG +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Micro Backplate diff --git a/printer_mods/kirby/v0_sherpa_mini_direct_drive/.metadata.yml b/printer_mods/kirby/v0_sherpa_mini_direct_drive/.metadata.yml new file mode 100644 index 000000000..f9c190f40 --- /dev/null +++ b/printer_mods/kirby/v0_sherpa_mini_direct_drive/.metadata.yml @@ -0,0 +1,8 @@ +cad: +- CAD/v0_direct_drive.step +description: A direct drive mod for the V0 using the Annex Sherpa Mini extruder +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Sherpa Mini Direct Drive Mod diff --git a/printer_mods/lakai/Bruag_Skirts/.metadata.yml b/printer_mods/lakai/Bruag_Skirts/.metadata.yml new file mode 100644 index 000000000..5f03594fb --- /dev/null +++ b/printer_mods/lakai/Bruag_Skirts/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: V2 350mm skirts inspired by Bruag Facades +images: +- Images/side_skirts.jpg +- Images/exhaust_grill.jpg +- Images/front_skirts.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Bruag Skirts diff --git a/printer_mods/leandromarceddu/PowerSkirt/.metadata.yml b/printer_mods/leandromarceddu/PowerSkirt/.metadata.yml new file mode 100644 index 000000000..6922faed5 --- /dev/null +++ b/printer_mods/leandromarceddu/PowerSkirt/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- cad/PowerSkirt.step +- cad/PowerSkirt.f3d +description: Modified skirtpiece for a digital power monitor +images: +- img/PowerSkirt.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: PowerSkirt diff --git a/printer_mods/littleferris/V0_Skirt_Inlet/.metadata.yml b/printer_mods/littleferris/V0_Skirt_Inlet/.metadata.yml new file mode 100644 index 000000000..ac0e0a2b2 --- /dev/null +++ b/printer_mods/littleferris/V0_Skirt_Inlet/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- step/v0_foot_skirt_right.step +- step/v0_foot_skirt_left.step +description: V0 C14 Skirt inlet +images: +- img/V0_inlet1.jpg +- img/V0_inlet2.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 c14 Skirt Inlet diff --git a/printer_mods/madfabrications/Vertical_PSU_Mount/.metadata.yml b/printer_mods/madfabrications/Vertical_PSU_Mount/.metadata.yml new file mode 100644 index 000000000..e73bb50f0 --- /dev/null +++ b/printer_mods/madfabrications/Vertical_PSU_Mount/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: Mounts the PSU vertically on the DIN rails +images: [] +mod_version: 1 +printer_compatibility: +- V2.4 +title: Vertical PSU Mount diff --git a/printer_mods/madros/V0_skirt_OLED/.metadata.yml b/printer_mods/madros/V0_skirt_OLED/.metadata.yml new file mode 100644 index 000000000..d821dd550 --- /dev/null +++ b/printer_mods/madros/V0_skirt_OLED/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: V0 skirt with 0.96" OLED +images: +- img/OLED.jpg +- img/V0_skirt_OLED.svg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 OLED-skirt diff --git a/printer_mods/maximilian-foerg/AB_Turbo_Mod/.metadata.yml b/printer_mods/maximilian-foerg/AB_Turbo_Mod/.metadata.yml new file mode 100644 index 000000000..cda18afef --- /dev/null +++ b/printer_mods/maximilian-foerg/AB_Turbo_Mod/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- CAD/AB_Turbo_Mod.step +description: A purely cosmetic mod for Afterburner +images: +- Images/01.png +- Images/03.JPG +- Images/02.png +- Images/04.JPG +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +- VT +title: Afterburner Turbo Mod diff --git a/printer_mods/maximilian-foerg/VSW_Double_60mm_Fan_Mount/.metadata.yml b/printer_mods/maximilian-foerg/VSW_Double_60mm_Fan_Mount/.metadata.yml new file mode 100644 index 000000000..8425b7ebb --- /dev/null +++ b/printer_mods/maximilian-foerg/VSW_Double_60mm_Fan_Mount/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/VSW_Double_60mm_Fan_Mount.step +description: A mount for two (or four) 60mm fans in SW's electronics compartment +images: +- Images/01.png +- Images/03.png +- Images/02.png +- Images/04.png +mod_version: 1 +printer_compatibility: +- VSW +title: Switchwire Double 60mm Fan Mount diff --git a/printer_mods/mikepthomas/MKS_Mosfet_Mount/.metadata.yml b/printer_mods/mikepthomas/MKS_Mosfet_Mount/.metadata.yml new file mode 100644 index 000000000..425cbda85 --- /dev/null +++ b/printer_mods/mikepthomas/MKS_Mosfet_Mount/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/MKS_Mosfet_Mount.step +description: MKS Mosfet Mount based of the Trident Raspberry Pi Mount. +images: +- Images/MKS_Mosfet.png +- Images/MKS_Mosfet_Mount.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VT +title: MKS Mosfet Mount diff --git a/printer_mods/mjoaris/10x11_Cable_Chain_Endcaps/.metadata.yml b/printer_mods/mjoaris/10x11_Cable_Chain_Endcaps/.metadata.yml new file mode 100644 index 000000000..af77bf2f7 --- /dev/null +++ b/printer_mods/mjoaris/10x11_Cable_Chain_Endcaps/.metadata.yml @@ -0,0 +1,19 @@ +cad: +- CAD/10x11-chain-endcap1_support.STEP +- CAD/10x11-chain-endcap2_nosupport.STEP +- CAD/10x11-chain-endcap2_support.STEP +- CAD/10x11-chain-endcap1_nosupport.STEP +description: Printable Endcaps for 10x11 Cable Chains +images: +- Images/10x11-chain-endcap1_nosupport.PNG +- Images/10x11-chain-endcap2_nosupport.PNG +- Images/10x11-chain-endcap1_support.PNG +- Images/10x11-chain-endcap2_support.PNG +- Images/endcaps_support.PNG +- Images/printed.jpg +- Images/endcaps_nosupport.PNG +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: 10x11 Cable Chain Endcaps diff --git a/printer_mods/mjoaris/Mini12864_LCD_Mount_for_V2.4/.metadata.yml b/printer_mods/mjoaris/Mini12864_LCD_Mount_for_V2.4/.metadata.yml new file mode 100644 index 000000000..43bb4e655 --- /dev/null +++ b/printer_mods/mjoaris/Mini12864_LCD_Mount_for_V2.4/.metadata.yml @@ -0,0 +1,19 @@ +cad: +- CAD/LCD_RearCover.STEP +- CAD/LCD_Hinge.STEP +- CAD/LCD_Accent.STEP +- CAD/LCD_Assembly.STEP +- CAD/LCD_Front.STEP +- CAD/Mini12864_LCD_Screen.STEP +- CAD/Alternative_base_(No_Heatset_Inserts)/LCD_Front_holes.STEP +description: Swiveling case for the Fysetc Mini12864 LCD +images: +- Images/LCD_SwivelDown.jpg +- Images/LCD_BackCover.jpg +- Images/LCD_SwivelUp.jpg +- Images/LCD_Detailed.jpg +- Images/LCD_CAD.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Mini12864 LCD Mount diff --git a/printer_mods/mosher/m3_door_hinges/.metadata.yml b/printer_mods/mosher/m3_door_hinges/.metadata.yml new file mode 100644 index 000000000..97d45cd6f --- /dev/null +++ b/printer_mods/mosher/m3_door_hinges/.metadata.yml @@ -0,0 +1,9 @@ +cad: +- Hinges v2.4 Mod.f3d +description: Simple mod of print in place door hinges, which uses m3 screws as shafts. +images: +- Door Hinges mod with M3 35mm.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Door hinges with M3 screws shafts diff --git a/printer_mods/mpfl/V0.1_skirt_OLED/.metadata.yml b/printer_mods/mpfl/V0.1_skirt_OLED/.metadata.yml new file mode 100644 index 000000000..7aa6474bf --- /dev/null +++ b/printer_mods/mpfl/V0.1_skirt_OLED/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: V0.1 skirt with 0.96" OLED +images: +- photo.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 OLED-skirt diff --git a/printer_mods/muradir/Zodiac_BMO_Stealthburner_Toolhead/.metadata.yml b/printer_mods/muradir/Zodiac_BMO_Stealthburner_Toolhead/.metadata.yml new file mode 100644 index 000000000..67bc2bf17 --- /dev/null +++ b/printer_mods/muradir/Zodiac_BMO_Stealthburner_Toolhead/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/Zodiac_BMO_Toolhead_Stealthburner.step +description: A Stealthburner toolhead for the Zodiac BMO Hotend, based on the Phaetus + BMO toolhead. +images: +- images/Toolhead.jpg +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +- VT +title: Zodiac BMO Stealthburner Toolhead diff --git a/printer_mods/natewalck/v1.8_Jigs/.metadata.yml b/printer_mods/natewalck/v1.8_Jigs/.metadata.yml new file mode 100644 index 000000000..7ae15fb37 --- /dev/null +++ b/printer_mods/natewalck/v1.8_Jigs/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Jigs for assembling V1.8 +images: +- images/lower_extrusion_jig.jpeg +mod_version: 1 +printer_compatibility: +- V1.8 +title: V1.8 Jigs diff --git a/printer_mods/nhchiu/V0.1_Movable_Pulley_Z/.metadata.yml b/printer_mods/nhchiu/V0.1_Movable_Pulley_Z/.metadata.yml new file mode 100644 index 000000000..1ee68c3cb --- /dev/null +++ b/printer_mods/nhchiu/V0.1_Movable_Pulley_Z/.metadata.yml @@ -0,0 +1,31 @@ +cad: +- kirigami_adaptor/CAD/kirigami_holder.step +- CAD/Pulley_Z_Drive.step +description: A movable pulley system on the Z axis with 1:8 total speed ratio for + V0.1 +images: +- Images/M4.png +- Images/Img.png +- Images/Top_Belt_End_Path.png +- Images/fixed_issue.png +- Images/Top_Idler.png +- Images/Mechanism.png +- Images/img4.jpg +- Images/Belt_Path.png +- Images/Top.png +- Images/Preload_Nuts.png +- Images/Top_Position.png +- Images/img3.jpg +- Images/img2.jpg +- Images/Top_Endstop.png +- Images/img1.jpg +- Images/M4_80T_Gear.png +- Images/kirigami.png +- Images/Top_Belt_End.png +- Images/Bed_Holder.png +- Images/Lower_End.png +- kirigami_adaptor/sliced.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0.1 Movable Pulley Z Drive diff --git a/printer_mods/nikolasbabetas/Neopixel_Holder/.metadata.yml b/printer_mods/nikolasbabetas/Neopixel_Holder/.metadata.yml new file mode 100644 index 000000000..ef29d0a04 --- /dev/null +++ b/printer_mods/nikolasbabetas/Neopixel_Holder/.metadata.yml @@ -0,0 +1,17 @@ +cad: +- CAD/Neopixel_Holder.step +- CAD/Neopixel_Holder.f3d +description: A holder to attach Neopixel/WS2812B Led Strips to the V0.1 +images: +- Images/LedStripConnections.jpg +- Images/BlueLight.jpg +- Images/CircuitDiagram.png +- Images/PinkLightMacro.jpg +- Images/WhiteLight.jpg +- Images/LitUpPrint.jpg +- Images/Extrusion.jpg +- Images/CloseUp.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: 'Neopixel Holder ' diff --git a/printer_mods/ommy/roller_brackets/.metadata.yml b/printer_mods/ommy/roller_brackets/.metadata.yml new file mode 100644 index 000000000..7b7a71fac --- /dev/null +++ b/printer_mods/ommy/roller_brackets/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Brackets to help rolling V2 on its side. +images: +- vrollers.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: roller brackets diff --git a/printer_mods/oxno/rbp_zero_braket/.metadata.yml b/printer_mods/oxno/rbp_zero_braket/.metadata.yml new file mode 100644 index 000000000..e317a26ee --- /dev/null +++ b/printer_mods/oxno/rbp_zero_braket/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Bracket for Raspberry pi zero. +images: +- rbp_bracket_front.png +- rbp_bracket_back.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: RBP Zero Bracket diff --git a/printer_mods/padok/chain_anchor-ADXL345_mount/.metadata.yml b/printer_mods/padok/chain_anchor-ADXL345_mount/.metadata.yml new file mode 100644 index 000000000..594259da4 --- /dev/null +++ b/printer_mods/padok/chain_anchor-ADXL345_mount/.metadata.yml @@ -0,0 +1,18 @@ +cad: +- cad/Chain_Anchor_-_IGUS_v9.step +description: A ADXL345 mount for the Afterburner +images: +- img/IMG_04.jpg +- img/IMG_05.jpg +- img/VORON2_v2.4_Assembly_-_Chain_Anchor_-_IGUS.png +- img/IMG_06.jpg +- img/IMG_02.jpg +- img/IMG_03.jpg +- img/IMG_01.jpg +- img/calibration_data_x.png +- img/calibration_data_y.png +- img/VORON2_v2.4_Assembly_1.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Chain Anchor - ADXL345 mount Mod diff --git a/printer_mods/piet206/V1.8._Z_Rails_Mod/.metadata.yml b/printer_mods/piet206/V1.8._Z_Rails_Mod/.metadata.yml new file mode 100644 index 000000000..249f7d998 --- /dev/null +++ b/printer_mods/piet206/V1.8._Z_Rails_Mod/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- cad/300LeadScrewMount.step +- cad/250LeadScrewBlock.step +- cad/ZMotorMount.step +description: Add MGN12H linear rails for Z axis motion +images: +- isoview1.png +mod_version: 1 +printer_compatibility: +- V1.8 +title: V1.8 Z Rails Mod diff --git a/printer_mods/prasadp4009/SW_SB_CRTouch/.metadata.yml b/printer_mods/prasadp4009/SW_SB_CRTouch/.metadata.yml new file mode 100644 index 000000000..749928edc --- /dev/null +++ b/printer_mods/prasadp4009/SW_SB_CRTouch/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- cad/SB_CRTouchMod.step +description: Voron SW StealthBurner CR Touch Mod +images: +- images/SB_CR_FullView.png +- images/SB_CR_Exploded.png +mod_version: 1 +printer_compatibility: +- VSW +title: StealthBurner CR Touch Mod diff --git a/printer_mods/quattroerik/front_door_m3_180_deg_3mm/.metadata.yml b/printer_mods/quattroerik/front_door_m3_180_deg_3mm/.metadata.yml new file mode 100644 index 000000000..e8e7b5ab0 --- /dev/null +++ b/printer_mods/quattroerik/front_door_m3_180_deg_3mm/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- Front_Door_Mod.f3d +description: Voron 2.4 door hinges for 3mm panel, 180 deg opening and m3 screw as + shaft +images: +- Assembly.png +- door_hinge_new.png +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: V2.4 Door Hinge M3 3mm 180deg diff --git a/printer_mods/randell/Door_Hinges/.metadata.yml b/printer_mods/randell/Door_Hinges/.metadata.yml new file mode 100644 index 000000000..916bb551f --- /dev/null +++ b/printer_mods/randell/Door_Hinges/.metadata.yml @@ -0,0 +1,21 @@ +cad: +- Hinges.f3d +- Hinges.step +description: Door hinges that use an M3 bolt for a pin and bolts thru the panel +images: +- Images/image_2.png +- Images/photo_1.jpg +- Images/image_3.png +- Images/image_1.png +- Images/photo_2.jpg +- Images/photo_3.jpg +- Images/image_4.png +- Images/photo_7.jpg +- Images/photo_6.jpg +- Images/image_5.png +- Images/photo_4.jpg +- Images/photo_5.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Door Hinges diff --git a/printer_mods/randell/Microswitch_Endstop/.metadata.yml b/printer_mods/randell/Microswitch_Endstop/.metadata.yml new file mode 100644 index 000000000..d6a287171 --- /dev/null +++ b/printer_mods/randell/Microswitch_Endstop/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- Microswitch_Edge_Pod.step +description: Modified endstop pod for use of endstop switches mounted on a PCB +images: +- Images/picture1.jpg +- Images/picture2.jpg +- Images/picture3.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Microswitch Pod for PCB diff --git a/printer_mods/raymondh/LargeSpoolHolders/.metadata.yml b/printer_mods/raymondh/LargeSpoolHolders/.metadata.yml new file mode 100644 index 000000000..3250ba530 --- /dev/null +++ b/printer_mods/raymondh/LargeSpoolHolders/.metadata.yml @@ -0,0 +1,9 @@ +cad: +- KVP5lb_holder.step +description: Larger spool holders for KVP spools +images: [] +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: Large Spool Holders diff --git a/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/.metadata.yml b/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/.metadata.yml new file mode 100644 index 000000000..75f2ff93d --- /dev/null +++ b/printer_mods/reQu1em00/Kirigami_LED_Bed_Front/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: Kirigami bed front with space for a single LED or Neopixel button +images: +- Beddefuser2.jpg +- Bedfront.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Kirigami LED Bed Front diff --git a/printer_mods/reapola/MKS_CANable_Pro_mount/.metadata.yml b/printer_mods/reapola/MKS_CANable_Pro_mount/.metadata.yml new file mode 100644 index 000000000..588ca4206 --- /dev/null +++ b/printer_mods/reapola/MKS_CANable_Pro_mount/.metadata.yml @@ -0,0 +1,18 @@ +cad: +- CAD/canable_pro_clip.f3d +- CAD/canable_pro_clip.step +- CAD/canable_pro_mount.step +- CAD/canable_pro_mount.f3d +description: MKS CANable Pro mount which mounts on a DIN rail +images: +- Images/canable_pro_mount_parts.jpg +- Images/canable_pro_mount_built.jpg +- Images/canable_pro_cad.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VSW +- VT +title: MKS CANable Pro DIN Mount diff --git a/printer_mods/revnull/rpi_7in_display_mount/.metadata.yml b/printer_mods/revnull/rpi_7in_display_mount/.metadata.yml new file mode 100644 index 000000000..36b9d86ae --- /dev/null +++ b/printer_mods/revnull/rpi_7in_display_mount/.metadata.yml @@ -0,0 +1,15 @@ +cad: [] +description: An articulating mount for the offical Raspberry Pi 7inch touch screen +images: +- Images/display_vertical.jpg +- Images/cable_vertical.jpg +- Images/cable_flat.jpg +- Images/mount_flat.jpg +- Images/display_tilted.jpg +- Images/mount_vertical.jpg +- Images/display_front.jpg +- Images/display_flat.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Raspberry Pi 7inch Display Mount diff --git a/printer_mods/richardjm/adxl-chain/.metadata.yml b/printer_mods/richardjm/adxl-chain/.metadata.yml new file mode 100644 index 000000000..3ad4b0c5c --- /dev/null +++ b/printer_mods/richardjm/adxl-chain/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/ADXL345-Carriage-GY-291-v3.f3d +- CAD/ADXL345-Carriage-Adafruit-v45.f3d +description: Permanent mount for ADXL boards on the back of the motor, replacing the + drag chain mount. +images: +- Images/TheDamage.jpg +- Images/Clearance.jpg +- Images/CAD.png +- Images/CAD-Adafruit.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: ADXL drag chain mount diff --git a/printer_mods/richardjm/back-plate/.metadata.yml b/printer_mods/richardjm/back-plate/.metadata.yml new file mode 100644 index 000000000..2b280ac5e --- /dev/null +++ b/printer_mods/richardjm/back-plate/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/VoronBlankingBackPlate-v15.f3d +description: Back blanking plate that can be used instead of the exhaust filter housing + if you are using something like a nevermore filter instead. +images: +- Images/Inside.jpg +- Images/Outside.jpg +- Images/CAD1.png +- Images/CAD2.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Back blanking plate diff --git a/printer_mods/richardjm/led-mounts/.metadata.yml b/printer_mods/richardjm/led-mounts/.metadata.yml new file mode 100644 index 000000000..9a19b04be --- /dev/null +++ b/printer_mods/richardjm/led-mounts/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/LedCorner15.5v13.f3d +description: Mounting corners with integrated cable runs for 15.5mm quarter round + aluminium led extrusions. +images: +- Images/Colourful.jpg +- Images/Extrusions.jpg +- Images/Closeup.jpg +- Images/White.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: LED 15.5mm quarter round mounts diff --git a/printer_mods/richardjm/picam-corner/.metadata.yml b/printer_mods/richardjm/picam-corner/.metadata.yml new file mode 100644 index 000000000..10cda9931 --- /dev/null +++ b/printer_mods/richardjm/picam-corner/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: Out of the way corner mounted picam +images: +- Images/TheView.jpg +- Images/TheMountingPoint.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Picam corner mount diff --git a/printer_mods/richardjm/snap-latch-2020/.metadata.yml b/printer_mods/richardjm/snap-latch-2020/.metadata.yml new file mode 100644 index 000000000..6fbe262e0 --- /dev/null +++ b/printer_mods/richardjm/snap-latch-2020/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/NewLatch v108.f3d +description: Quick release panel latch inspired by the work of others. +images: +- Images/Assembly.gif +- Images/BuildPlate.png +- Images/Latch-v68-3mm.jpg +- Images/Parameters.png +- Images/250Plate.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Printable snap latches for 2020 extrusion diff --git a/printer_mods/rngSplat/SW_Deck_Plate/.metadata.yml b/printer_mods/rngSplat/SW_Deck_Plate/.metadata.yml new file mode 100644 index 000000000..fabdcac5f --- /dev/null +++ b/printer_mods/rngSplat/SW_Deck_Plate/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Print a deck plate for Switchwire with debossed Voron logo +images: +- Printable_Deckplate.jpg +mod_version: 1 +printer_compatibility: +- VSW +title: Printable Switchwire Deck Plate diff --git a/printer_mods/roboticator24/4inch_touchscreen_mount_for_v2.4/.metadata.yml b/printer_mods/roboticator24/4inch_touchscreen_mount_for_v2.4/.metadata.yml new file mode 100644 index 000000000..1cc183b2c --- /dev/null +++ b/printer_mods/roboticator24/4inch_touchscreen_mount_for_v2.4/.metadata.yml @@ -0,0 +1,16 @@ +cad: [] +description: Mount a 4-inch LCD touchscreen to your V2.4 in place of the usual 12864 + panel to allow you to run the amazing OctoDash touch UI +images: +- img/printorientation.jpg +- img/photo.jpg +- img/pcb.jpg +- img/cad.jpg +- img/attachbottompanel.jpg +- img/screenshots.jpg +- img/pushbuttonlocation.jpg +- img/removesupports.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Touchscreen for OctoDash diff --git a/printer_mods/rsheng118/BTT_octopus_DIN_vertical_mount/.metadata.yml b/printer_mods/rsheng118/BTT_octopus_DIN_vertical_mount/.metadata.yml new file mode 100644 index 000000000..2149216f9 --- /dev/null +++ b/printer_mods/rsheng118/BTT_octopus_DIN_vertical_mount/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: DIN vertical mount for Big Tech Tree Octopus board +images: +- img/spacer.jpg +- img/mount.jpg +- img/back.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: BTT octopus DIN vertical mount diff --git a/printer_mods/ryandam/Cable_management_duct/.metadata.yml b/printer_mods/ryandam/Cable_management_duct/.metadata.yml new file mode 100644 index 000000000..8e19c4d4e --- /dev/null +++ b/printer_mods/ryandam/Cable_management_duct/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- STEP/VoronV0_CableManagementDuct.step +description: Zip tie mount intergrated cable duct to hide your cable +images: +- Images/VORON_V0.1_cable_management_duct_flat.png +- Images/VORON_V0.1_cable_management_duct.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: Cable Management Duct diff --git a/printer_mods/sammynorway/LGX-stealthburner-connector-cover/.metadata.yml b/printer_mods/sammynorway/LGX-stealthburner-connector-cover/.metadata.yml new file mode 100644 index 000000000..8c4672214 --- /dev/null +++ b/printer_mods/sammynorway/LGX-stealthburner-connector-cover/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- CAD/Stealthburner-PCBCover-AirVents.step +description: Cable cover for LGX and stealthburner +images: +- Images/Preview-front.png +- Images/Preview-back.png +- Images/LGX_Stealthburner_connectorCover.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +- VT +title: LGX stealthburner connector cover diff --git a/printer_mods/samwiseg0/4channel_relay_under_deck_mount/.metadata.yml b/printer_mods/samwiseg0/4channel_relay_under_deck_mount/.metadata.yml new file mode 100644 index 000000000..36039187d --- /dev/null +++ b/printer_mods/samwiseg0/4channel_relay_under_deck_mount/.metadata.yml @@ -0,0 +1,9 @@ +cad: +- CAD/4channel_relay_under_deck_mount.step +description: Mod to mount a 4 channel GPIO controlled relay +images: +- Images/4channel_relay_under_deck_mount.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: 4 Channel Relay Under Deck Mount diff --git a/printer_mods/samwiseg0/ab_plug_microfit_1x4/.metadata.yml b/printer_mods/samwiseg0/ab_plug_microfit_1x4/.metadata.yml new file mode 100644 index 000000000..9d9db9eab --- /dev/null +++ b/printer_mods/samwiseg0/ab_plug_microfit_1x4/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/v24_ab_microfit_1x4_pme.step +- CAD/v24_ab_microfit_1x4.step +description: Mod to mount A & B motor connectors to the gantry +images: +- Images/ab_microfit_1x4_pme.png +- Images/ab_microfit_1x4_non_pme.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: AB Plug (Microfit 1x4) diff --git a/printer_mods/samwiseg0/corner_cable_hide/.metadata.yml b/printer_mods/samwiseg0/corner_cable_hide/.metadata.yml new file mode 100644 index 000000000..ee41972ad --- /dev/null +++ b/printer_mods/samwiseg0/corner_cable_hide/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/[a]_top_corner_cable_hide_x4.step +description: Mod to hide cables around z idlers +images: +- Images/[a]_top_corner_cable_hide_back.png +- Images/[a]_top_corner_cable_hide_inside.png +- Images/[a]_top_corner_cable_hide.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Corner Cable Hide/Cover (LED Wires) diff --git a/printer_mods/samwiseg0/esp8266_nodemcu_din_mount/.metadata.yml b/printer_mods/samwiseg0/esp8266_nodemcu_din_mount/.metadata.yml new file mode 100644 index 000000000..5305647c2 --- /dev/null +++ b/printer_mods/samwiseg0/esp8266_nodemcu_din_mount/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/esp8266_nodemcu_din_mount_universal.step +description: Din mount for ESP8266 NodeMCU +images: +- Images/esp8266_nodemcu_din_mount_2.png +- Images/esp8266_nodemcu_din_mount.png +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: ESP8266 NodeMCU Din Mount diff --git a/printer_mods/samwiseg0/extrusion_thermistor_mount/.metadata.yml b/printer_mods/samwiseg0/extrusion_thermistor_mount/.metadata.yml new file mode 100644 index 000000000..673bbe2c9 --- /dev/null +++ b/printer_mods/samwiseg0/extrusion_thermistor_mount/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- CAD/extrusion_thermistor_holder.step +description: Extrusion mount for a NTC100K Thermistor extrusion +images: +- Images/extrusion_thermistor_holder.png +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VSW +- VT +title: Extrusion/Chamber Thermistor Mount diff --git a/printer_mods/samwiseg0/lrs_screw_terminal_cover/.metadata.yml b/printer_mods/samwiseg0/lrs_screw_terminal_cover/.metadata.yml new file mode 100644 index 000000000..163216972 --- /dev/null +++ b/printer_mods/samwiseg0/lrs_screw_terminal_cover/.metadata.yml @@ -0,0 +1,15 @@ +cad: +- CAD/lrs_50_screw_terminal_cover.step +- CAD/lrs_200_screw_terminal_cover.step +description: Mod to cover the screw terminals for several LRS style PSUs +images: +- Images/lrs_200_screw_terminal_cover.png +- Images/lrs_50_screw_terminal_cover.png +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +- VSW +- VT +title: LRS PSU Screw Terminal Cover diff --git a/printer_mods/samwiseg0/microfit_2x3_skirt_connector_adxl/.metadata.yml b/printer_mods/samwiseg0/microfit_2x3_skirt_connector_adxl/.metadata.yml new file mode 100644 index 000000000..789ff0259 --- /dev/null +++ b/printer_mods/samwiseg0/microfit_2x3_skirt_connector_adxl/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/microfit_2x3_skirt_connector_adxl.step +description: Mod for a Microfit 2x3 connector to be mounted in a skirt +images: +- Images/[a]_microfit_2x3_skirt_connector_adxl_whole.png +- Images/[a]_microfit_2x3_skirt_connector_adxl_skirt.png +- Images/[a]_microfit_2x3_skirt_connector_adxl.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Microfit 2x3 Skirt Connector (ADXL) diff --git a/printer_mods/samwiseg0/voyager_gtx_din_mount/.metadata.yml b/printer_mods/samwiseg0/voyager_gtx_din_mount/.metadata.yml new file mode 100644 index 000000000..1e44ee7bb --- /dev/null +++ b/printer_mods/samwiseg0/voyager_gtx_din_mount/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- CAD/voyager_gtx_din_mount_universal.step +description: Din carrier for a Corsair Flash Voyager GTX +images: +- Images/voyager_gtx_din_mount_uni_2.png +- Images/voyager_gtx_din_mount.jpg +- Images/voyager_gtx_din_mount.png +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: Corsair Flash Voyager GTX Din Mount diff --git a/printer_mods/scanlory/clip_on_door_frame/.metadata.yml b/printer_mods/scanlory/clip_on_door_frame/.metadata.yml new file mode 100644 index 000000000..8fde9a35f --- /dev/null +++ b/printer_mods/scanlory/clip_on_door_frame/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- STEPs/Voron_Panel_Trim_300mm.step +- STEPs/Voron_Panel_Trim_350mm.step +- STEPs/Voron_Panel_Trim_250mm.step +description: Clip-on frame to stiffen and seal front door panels when using modified + hinges. +images: +- Images/door_latch.jpg +- Images/right_door.jpg +- Images/full_front_view.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Clip-On Front Door Frame diff --git a/printer_mods/slitte/PCB_Probe/.metadata.yml b/printer_mods/slitte/PCB_Probe/.metadata.yml new file mode 100644 index 000000000..585be0a2b --- /dev/null +++ b/printer_mods/slitte/PCB_Probe/.metadata.yml @@ -0,0 +1,11 @@ +cad: [] +description: PCB for BAT85 and pull up resistor +images: +- images/D5D337EA-ACC4-4DDF-B353-550F60E1EAA6.jpeg +- images/9C41BAE9-E4E5-412E-ABDE-0C47AB14D8F3.jpeg +- images/9FB91CEF-5DD7-4529-AA61-205C67A30F6B.jpeg +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: PCB_Probe diff --git a/printer_mods/slitte/ssd_bracket/.metadata.yml b/printer_mods/slitte/ssd_bracket/.metadata.yml new file mode 100644 index 000000000..a0a833cfe --- /dev/null +++ b/printer_mods/slitte/ssd_bracket/.metadata.yml @@ -0,0 +1,13 @@ +cad: +- STEP/ssd_bracket.step +description: bracket for mounting a 2.5" ssd to a din rail +images: +- images/0354E8D1-312F-4349-B1D6-38239E54C75F.jpeg +- images/A36AF599-317D-4D6E-8989-10924DDE9098.jpeg +- images/06C8B63A-0E93-41D4-B6F2-A8E8CFBC5BC6.jpeg +- images/DEF912DF-37F4-4060-8EA9-BF4894C53D85.jpeg +mod_version: 1 +printer_compatibility: +- V2.4 +- VT +title: ssd_bracket diff --git a/printer_mods/sloscotty/SW_Wall_Plate/.metadata.yml b/printer_mods/sloscotty/SW_Wall_Plate/.metadata.yml new file mode 100644 index 000000000..d1e0402cc --- /dev/null +++ b/printer_mods/sloscotty/SW_Wall_Plate/.metadata.yml @@ -0,0 +1,12 @@ +cad: [] +description: SW plate for enclosure +images: +- Images/printed_pieces.jpg +- Images/SW_plate_rendered.jpg +- Images/assembled1.jpg +- Images/SW_backwall_plate.jpg +- Images/base_inserts.jpg +mod_version: 1 +printer_compatibility: +- VSW +title: Switchwire Wall Plate diff --git a/printer_mods/sloscotty/TopHat_Cam_Extension/.metadata.yml b/printer_mods/sloscotty/TopHat_Cam_Extension/.metadata.yml new file mode 100644 index 000000000..caa88ec81 --- /dev/null +++ b/printer_mods/sloscotty/TopHat_Cam_Extension/.metadata.yml @@ -0,0 +1,23 @@ +cad: +- CAD/Tophat-Cam-Extension.f3d +description: Tophat extension with integrated webcam for V0/0.1 +images: +- Images/THCE_without_TH.jpg +- Images/Camera_Assembly.jpg +- Images/VHB_FrontRear_Spacers.jpg +- Images/TopHat_Cam_Extension_Installed.jpg +- Images/Arm_Cover_Assembly.jpg +- Images/Back_Panel.jpg +- Images/Arducam.jpg +- Images/THCE_Top.jpg +- Images/USB_Cable_Path.jpg +- Images/THCE_Overview.jpg +- Images/Cam_View.jpg +- Images/Tophat_Cam_Extension.jpg +- Images/Arm_Assembly.jpg +- Images/Prepare_Arducam.jpg +- Images/Insert_USBcable.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: NoNutz TopHat Cam Extension diff --git a/printer_mods/spacelab2021/Orbiter-Clockwork/.metadata.yml b/printer_mods/spacelab2021/Orbiter-Clockwork/.metadata.yml new file mode 100644 index 000000000..1be8cf318 --- /dev/null +++ b/printer_mods/spacelab2021/Orbiter-Clockwork/.metadata.yml @@ -0,0 +1,18 @@ +cad: +- cad/Orbiter-Clockwork.step +description: A clockwork adaptor for the Orbiter v1.5 Extruder with full integration + into the Afterburner. Includes a filament quick release lever for simple filament + loading and unloading. +images: +- docs/images/Orbiter-Clockwork-Main.png +- docs/images/Orbiter_Clockwork_Module-Back_Right.png +- docs/images/Orbiter_Clockwork_Module-Back_Left.png +- docs/images/Orbiter_Clockwork_Module-Left_Side.png +- docs/images/Orbiter_Clockwork_Module-Right_Side.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +- VT +title: Orbiter Clockwork Mount diff --git a/printer_mods/sse018/Octopus_DIN_Rail_bracket/.metadata.yml b/printer_mods/sse018/Octopus_DIN_Rail_bracket/.metadata.yml new file mode 100644 index 000000000..49687250b --- /dev/null +++ b/printer_mods/sse018/Octopus_DIN_Rail_bracket/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- CAD/octopus_din_bracket.step +description: A Din rail mount for BTT Octopus board +images: +- img/octobk-00.png +- img/octobk-01.png +- img/octobk-02.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Octopus DIN Rail bracket diff --git a/printer_mods/strayr/stealthburner_creality_toolhead/.metadata.yml b/printer_mods/strayr/stealthburner_creality_toolhead/.metadata.yml new file mode 100644 index 000000000..e6d6129a4 --- /dev/null +++ b/printer_mods/strayr/stealthburner_creality_toolhead/.metadata.yml @@ -0,0 +1,20 @@ +cad: +- cad/Stealthburner_Printhead_Creality.step +description: Use a creality ender 3 style hotend with stealthburner +images: +- img/pneumatic_coupler.jpg +- img/mk8_heater_position.png +- img/v6_heater_position.png +- img/probe_cutout.png +- img/nozzle_position.png +- img/friction_coupler.jpg +- img/improved_printability.png +- img/E3_toolhead_rear.jpg +- img/in_use.jpg +- img/E3_toolhead_open.jpg +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +title: Creality toolhead for stealthburner diff --git a/printer_mods/sttts/Waveshare-5.5-inch-HDMI-AMOLED/.metadata.yml b/printer_mods/sttts/Waveshare-5.5-inch-HDMI-AMOLED/.metadata.yml new file mode 100644 index 000000000..b2af77bb2 --- /dev/null +++ b/printer_mods/sttts/Waveshare-5.5-inch-HDMI-AMOLED/.metadata.yml @@ -0,0 +1,11 @@ +cad: [] +description: Mod to mount a Waveshare 5.5inch full HD display on a V2 +images: +- Images/fusion-back.png +- Images/fusion-front.png +- Images/photo.jpeg +mod_version: 1 +printer_compatibility: +- V2.4 +- VSW +title: Waveshare 5.5inch HDMI AMOLED Mount diff --git a/printer_mods/tallman5/z-locks/.metadata.yml b/printer_mods/tallman5/z-locks/.metadata.yml new file mode 100644 index 000000000..3fe18334d --- /dev/null +++ b/printer_mods/tallman5/z-locks/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- cad/z-locks.f3d +- cad/z-locks.step +description: Helping hands curing v2.4 build, replaces long zip ties. +images: +- images/z-locks.png +- images/z-locks-installed.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Z Locks diff --git a/printer_mods/tameike/DIN_Rail_2020_holder/.metadata.yml b/printer_mods/tameike/DIN_Rail_2020_holder/.metadata.yml new file mode 100644 index 000000000..4db1501ae --- /dev/null +++ b/printer_mods/tameike/DIN_Rail_2020_holder/.metadata.yml @@ -0,0 +1,8 @@ +cad: +- DIN rail 2020 holder.f3d +description: Attaching DIN Rails to 2020 +images: [] +mod_version: 1 +printer_compatibility: +- V2.4 +title: Din Rail 2020 Holder diff --git a/printer_mods/tameike/DIN_Rail_SKR_1.3_90deg/.metadata.yml b/printer_mods/tameike/DIN_Rail_SKR_1.3_90deg/.metadata.yml new file mode 100644 index 000000000..c3dfdf110 --- /dev/null +++ b/printer_mods/tameike/DIN_Rail_SKR_1.3_90deg/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: SKR V1.3 bracket turned 90 degrees +images: [] +mod_version: 1 +printer_compatibility: +- V2.4 +title: Din Rail SKR 90 deg diff --git a/printer_mods/tameike/Jetpack_V0/.metadata.yml b/printer_mods/tameike/Jetpack_V0/.metadata.yml new file mode 100644 index 000000000..e4c906287 --- /dev/null +++ b/printer_mods/tameike/Jetpack_V0/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: Attach Jetpack to V0 frame +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: Jetpack V0 base diff --git a/printer_mods/tameike/V0_TR_Mounting_Frame/.metadata.yml b/printer_mods/tameike/V0_TR_Mounting_Frame/.metadata.yml new file mode 100644 index 000000000..0df0b3973 --- /dev/null +++ b/printer_mods/tameike/V0_TR_Mounting_Frame/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: TR V0 mount +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: TacoRaven Mounting Frame diff --git a/printer_mods/tayto-chip/skirt_switch_mod/.metadata.yml b/printer_mods/tayto-chip/skirt_switch_mod/.metadata.yml new file mode 100644 index 000000000..69437692a --- /dev/null +++ b/printer_mods/tayto-chip/skirt_switch_mod/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: Add a ON/OFF Switch to side or front skirts +images: +- images/IMG_1222.jpeg +- images/IMG_1224.jpeg +mod_version: 1 +printer_compatibility: +- V2.4 +title: V2.4 Skirt Switch Mod diff --git a/printer_mods/teookie/AB_dial_indicator_mount/.metadata.yml b/printer_mods/teookie/AB_dial_indicator_mount/.metadata.yml new file mode 100644 index 000000000..b3a07ac3b --- /dev/null +++ b/printer_mods/teookie/AB_dial_indicator_mount/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- AB_dial_indicator_mount.step +description: Mount for attaching standard dial indicators to AB +images: +- image1.png +- image2.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +title: AB dial indicator mount diff --git a/printer_mods/teookie/skr_brace/.metadata.yml b/printer_mods/teookie/skr_brace/.metadata.yml new file mode 100644 index 000000000..8b1492300 --- /dev/null +++ b/printer_mods/teookie/skr_brace/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- skr_brace.step +description: Rigidize and stabilize SKR 1.4 mounts +images: +- pic1.png +- pic3.png +- pic2.jpg +- cad1.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: SKR Brace diff --git a/printer_mods/th0mpy/beefy-din/.metadata.yml b/printer_mods/th0mpy/beefy-din/.metadata.yml new file mode 100644 index 000000000..ad87a0f81 --- /dev/null +++ b/printer_mods/th0mpy/beefy-din/.metadata.yml @@ -0,0 +1,20 @@ +cad: +- cad/BEEFY_Din.step +description: Two piece BEEFY Din Clips, holds stronger +images: +- images/IMG_0998.jpeg +- images/IMG_0994.jpeg +- images/IMG_0995.jpeg +- images/IMG_0999.jpeg +- images/BEEFY_Din.png +- images/BEEFY_Din-(55mm).png +- images/IMG_0992.jpeg +- images/IMG_0993.jpeg +- images/BEEFY_Din-PSU(50mm).png +- images/t-logo.png +- images/IMG_0996.jpeg +- images/IMG_0997.jpeg +mod_version: 1 +printer_compatibility: +- V2.4 +title: BEEFY Din Clips diff --git a/printer_mods/togi/exhaust_housing_side_fitting/.metadata.yml b/printer_mods/togi/exhaust_housing_side_fitting/.metadata.yml new file mode 100644 index 000000000..e14de5523 --- /dev/null +++ b/printer_mods/togi/exhaust_housing_side_fitting/.metadata.yml @@ -0,0 +1,10 @@ +cad: +- Exhast Housing Side Fitting.f3d +description: Moves the exhaust housing bowden fitting 90 degrees to allow the printer + to stand closer to a wall +images: +- Images/1.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Exhaust housing side fitting diff --git a/printer_mods/top_gun_de/mount_for_umbilical/.metadata.yml b/printer_mods/top_gun_de/mount_for_umbilical/.metadata.yml new file mode 100644 index 000000000..5a0a50842 --- /dev/null +++ b/printer_mods/top_gun_de/mount_for_umbilical/.metadata.yml @@ -0,0 +1,14 @@ +cad: +- STEP/Guide-2-hole-Igus.step +- STEP/Guide-3-hole.step +- STEP/Key.step +description: Umbilical guide that goes on the chain anchor +images: +- Images/Umbilical-side.jpg +- Images/Umbilical-guide.jpg +- Images/Umbilical-rear.jpg +- Images/Umbilical-total.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: mount_for_umbilical diff --git a/printer_mods/warriorofwire/slenderfan/.metadata.yml b/printer_mods/warriorofwire/slenderfan/.metadata.yml new file mode 100644 index 000000000..5da8f7f1a --- /dev/null +++ b/printer_mods/warriorofwire/slenderfan/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- cad/slenderfan.step +description: Lighter, quieter, smaller Afterburner +images: +- images/render.png +- images/printer.png +- images/render_open.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Slenderfan for Afterburner diff --git a/printer_mods/whoppingpochard/extrusion_backers/.metadata.yml b/printer_mods/whoppingpochard/extrusion_backers/.metadata.yml new file mode 100644 index 000000000..39682bc66 --- /dev/null +++ b/printer_mods/whoppingpochard/extrusion_backers/.metadata.yml @@ -0,0 +1,22 @@ +cad: [] +description: Laser-cut metal pieces to counteract bimetallic frame warping +images: +- images/fusion_y_backer.png +- images/bed_mesh_comparison.png +- images/steel_1.9mm.png +- images/backers_installed.jpeg +- images/backers_blued.jpeg +- images/no_backer.png +- images/fusion_x_chainmount.png +- images/fusion_y_chainmount.png +- images/ti_1.5mm.png +- images/gantry_factor_loose.png +- images/test1_comparison.png +- images/results/garretwp_results.png +- images/results/v1.8_results.png +- images/results/v2.4_results.png +- images/results/whopping_results.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Extrusion Backers diff --git a/printer_mods/wile-e1/Deck_Panel_Support_Clips/.metadata.yml b/printer_mods/wile-e1/Deck_Panel_Support_Clips/.metadata.yml new file mode 100644 index 000000000..bc37efac5 --- /dev/null +++ b/printer_mods/wile-e1/Deck_Panel_Support_Clips/.metadata.yml @@ -0,0 +1,12 @@ +cad: [] +description: 'Clips to help support lower deck panels to prevent (or fix) warping:' +images: +- deck_clip_top.png +- deck_clip_bottom.png +- deck_clip_adjustable.png +- deck_clip_side.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: Deck Panel Support Clips diff --git a/printer_mods/wile-e1/Stealthburner_CW1_PCB_Cover/.metadata.yml b/printer_mods/wile-e1/Stealthburner_CW1_PCB_Cover/.metadata.yml new file mode 100644 index 000000000..f077dedf9 --- /dev/null +++ b/printer_mods/wile-e1/Stealthburner_CW1_PCB_Cover/.metadata.yml @@ -0,0 +1,12 @@ +cad: [] +description: 'Low-poly for Stealthburner + CW1 + PCB installations:' +images: +- Images/cover_rear.png +- Images/cover_front.png +- Images/cover_installed.png +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +- VSW +title: Stealthburner + CW1 + PCB Cover diff --git a/printer_mods/wrez/astrodyne-inlet/.metadata.yml b/printer_mods/wrez/astrodyne-inlet/.metadata.yml new file mode 100644 index 000000000..bf3f192f1 --- /dev/null +++ b/printer_mods/wrez/astrodyne-inlet/.metadata.yml @@ -0,0 +1,17 @@ +cad: +- CAD/power-inlet-astrodyne.f3d +- CAD/power-inlet-astrodyne.step +description: Drop in replacement for alternate-source power inlet if spec inlet is + back-ordered +images: +- images/fuses.jpg +- images/power-inlet-astrodyne.png +- images/in-situ.jpg +- images/front-view.jpg +- images/082SM-tabs.jpg +- images/rear-view.jpg +- images/disassembled.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Alternate IEC 320 C14 Power Inlet Housing diff --git a/printer_mods/xbst_/ADXL345_V0_Mount/.metadata.yml b/printer_mods/xbst_/ADXL345_V0_Mount/.metadata.yml new file mode 100644 index 000000000..c50b33ce7 --- /dev/null +++ b/printer_mods/xbst_/ADXL345_V0_Mount/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: V0 Mount for a ADXL345 module +images: +- example.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: ADXL345 V0 Mount diff --git a/printer_mods/xbst_/Bed_Hinge/.metadata.yml b/printer_mods/xbst_/Bed_Hinge/.metadata.yml new file mode 100644 index 000000000..de7163ae7 --- /dev/null +++ b/printer_mods/xbst_/Bed_Hinge/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: A way of reaching electronics from the top by having a "car hood" style + hinge for the heatbed, and rotated electronics mounts. +images: +- Pictures/piston.jpg +- Pictures/result.gif +mod_version: 1 +printer_compatibility: +- V2.4 +title: Car Hood Style Bed Hinge diff --git a/printer_mods/xbst_/Duct_Mount/.metadata.yml b/printer_mods/xbst_/Duct_Mount/.metadata.yml new file mode 100644 index 000000000..2bd20c2a4 --- /dev/null +++ b/printer_mods/xbst_/Duct_Mount/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: 100mm/4" ducting mount for ventilation. Also supports umbilical cord + and has 3 orientations for bowden adapter. +images: +- example2.jpg +- example.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: Duct Mount diff --git a/printer_mods/xbst_/DuetZero/.metadata.yml b/printer_mods/xbst_/DuetZero/.metadata.yml new file mode 100644 index 000000000..10e079b9f --- /dev/null +++ b/printer_mods/xbst_/DuetZero/.metadata.yml @@ -0,0 +1,10 @@ +cad: [] +description: Pi Zero mount over a Duet2 for space saving +images: +- example.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +- V1.8 +- V2.4 +title: DuetZero diff --git a/printer_mods/xbst_/Easy_Access_Rear_Panels_v0/.metadata.yml b/printer_mods/xbst_/Easy_Access_Rear_Panels_v0/.metadata.yml new file mode 100644 index 000000000..10c91792a --- /dev/null +++ b/printer_mods/xbst_/Easy_Access_Rear_Panels_v0/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: New rear panels designed to expose the extruder for easy filament swapping +images: +- example.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Easy Access Rear Panels diff --git a/printer_mods/xbst_/Flat_Skirts/.metadata.yml b/printer_mods/xbst_/Flat_Skirts/.metadata.yml new file mode 100644 index 000000000..f326aa4c4 --- /dev/null +++ b/printer_mods/xbst_/Flat_Skirts/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: Flat V2.4 Skirts so a panel without cutouts can be used +images: [] +mod_version: 1 +printer_compatibility: +- V2.4 +title: Flat V2.4 Skirts diff --git a/printer_mods/xbst_/HOYMK_SSR_Mount/.metadata.yml b/printer_mods/xbst_/HOYMK_SSR_Mount/.metadata.yml new file mode 100644 index 000000000..29bc46dc3 --- /dev/null +++ b/printer_mods/xbst_/HOYMK_SSR_Mount/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: Mount for Chinese HOYMK SSR +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: HOYMK SSR Mount diff --git a/printer_mods/xbst_/Hat_LED_Mount/.metadata.yml b/printer_mods/xbst_/Hat_LED_Mount/.metadata.yml new file mode 100644 index 000000000..0e30d732a --- /dev/null +++ b/printer_mods/xbst_/Hat_LED_Mount/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Top Hat LED module mount +images: +- example.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Hat LED Mount diff --git a/printer_mods/xbst_/LED_Holder/.metadata.yml b/printer_mods/xbst_/LED_Holder/.metadata.yml new file mode 100644 index 000000000..35ac9702d --- /dev/null +++ b/printer_mods/xbst_/LED_Holder/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: Very simple mount for some (?) PCB LED Bars +images: +- example.JPG +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: PCB LED Holder diff --git a/printer_mods/xbst_/Max31865_DIN_Mount/.metadata.yml b/printer_mods/xbst_/Max31865_DIN_Mount/.metadata.yml new file mode 100644 index 000000000..dc5efcf2e --- /dev/null +++ b/printer_mods/xbst_/Max31865_DIN_Mount/.metadata.yml @@ -0,0 +1,9 @@ +cad: [] +description: A simple DIN rail mount for the Adafruit (or SAME SIZE clone) MAX31865 + PT100 Board. +images: [] +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: DIN Mount Max31865 diff --git a/printer_mods/xbst_/Omron_DIN_Mount/.metadata.yml b/printer_mods/xbst_/Omron_DIN_Mount/.metadata.yml new file mode 100644 index 000000000..6237de04e --- /dev/null +++ b/printer_mods/xbst_/Omron_DIN_Mount/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: A simple DIN rail mount for the BOM Relay +images: [] +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: DIN Mount Omron Relay diff --git a/printer_mods/xbst_/Relay_DIN_Mount/.metadata.yml b/printer_mods/xbst_/Relay_DIN_Mount/.metadata.yml new file mode 100644 index 000000000..d6df6415c --- /dev/null +++ b/printer_mods/xbst_/Relay_DIN_Mount/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: A simple DIN rail mount for the 4 channel relay board for Raspberry Pi +images: [] +mod_version: 1 +printer_compatibility: +- V1.8 +- V2.4 +title: DIN Mount Pi 4x Relay Board diff --git a/printer_mods/xbst_/V0_Electronic_Panel/.metadata.yml b/printer_mods/xbst_/V0_Electronic_Panel/.metadata.yml new file mode 100644 index 000000000..6df7e6c79 --- /dev/null +++ b/printer_mods/xbst_/V0_Electronic_Panel/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: A printed cover for v0 electronics. Requires larger printer to print. +images: +- example.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Electronics Cover diff --git a/printer_mods/xbst_/V0_M4_Mod/.metadata.yml b/printer_mods/xbst_/V0_M4_Mod/.metadata.yml new file mode 100644 index 000000000..a497cdd39 --- /dev/null +++ b/printer_mods/xbst_/V0_M4_Mod/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Mod to mount a M4 extruder to a Voron 0 where pocketwatch extruder mounts +images: +- example.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: Mobius 4 (M4) V0 Mod diff --git a/printer_mods/xbst_/V0_Picam/.metadata.yml b/printer_mods/xbst_/V0_Picam/.metadata.yml new file mode 100644 index 000000000..7da15ff84 --- /dev/null +++ b/printer_mods/xbst_/V0_Picam/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: A Raspberry Pi Camera Mount For V0 +images: +- example.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 PiCam Mount diff --git a/printer_mods/xbst_/V0_Screw_Front_Hinge_Mod/.metadata.yml b/printer_mods/xbst_/V0_Screw_Front_Hinge_Mod/.metadata.yml new file mode 100644 index 000000000..a9b02add9 --- /dev/null +++ b/printer_mods/xbst_/V0_Screw_Front_Hinge_Mod/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: Mod to screw the front door panel (instead of VHB) +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: Screwed Front Door Hinge diff --git a/printer_mods/xbst_/V0_Skirt_Buttons/.metadata.yml b/printer_mods/xbst_/V0_Skirt_Buttons/.metadata.yml new file mode 100644 index 000000000..6aa6e5708 --- /dev/null +++ b/printer_mods/xbst_/V0_Skirt_Buttons/.metadata.yml @@ -0,0 +1,9 @@ +cad: +- Buttons/CAD.f3d +description: Mod to mount custom Gcode macro buttons & Waveshare 1.3" OLED display +images: +- Pi.png +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Buttons & OLED Mount diff --git a/printer_mods/xbst_/V2.4_Fanless_Middle_Skirt/.metadata.yml b/printer_mods/xbst_/V2.4_Fanless_Middle_Skirt/.metadata.yml new file mode 100644 index 000000000..bc9a98bc3 --- /dev/null +++ b/printer_mods/xbst_/V2.4_Fanless_Middle_Skirt/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: A Fanless alternative middle side skirt +images: [] +mod_version: 1 +printer_compatibility: +- V2.4 +title: V2.4 Fanless Middle Skirt diff --git a/printer_mods/xbst_/V2.4_Skirt_Buttons/.metadata.yml b/printer_mods/xbst_/V2.4_Skirt_Buttons/.metadata.yml new file mode 100644 index 000000000..8184a729c --- /dev/null +++ b/printer_mods/xbst_/V2.4_Skirt_Buttons/.metadata.yml @@ -0,0 +1,12 @@ +cad: +- Buttons/CAD.f3d +description: Skirt mod for custom Gcode macro buttons +images: +- Pictures/4.jpg +- Pictures/2.jpg +- Pictures/3.jpg +- Pictures/1.jpg +mod_version: 1 +printer_compatibility: +- V2.4 +title: V2.4 Skirt Buttons diff --git a/printer_mods/xbst_/ZipClip_v0/.metadata.yml b/printer_mods/xbst_/ZipClip_v0/.metadata.yml new file mode 100644 index 000000000..1825b0497 --- /dev/null +++ b/printer_mods/xbst_/ZipClip_v0/.metadata.yml @@ -0,0 +1,7 @@ +cad: [] +description: Very simple ziptie mount for v0 1515 extrusions +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: ZipClip V0 diff --git a/printer_mods/xceled/Single_Panel_Magnet_Mount/.metadata.yml b/printer_mods/xceled/Single_Panel_Magnet_Mount/.metadata.yml new file mode 100644 index 000000000..2e1b23673 --- /dev/null +++ b/printer_mods/xceled/Single_Panel_Magnet_Mount/.metadata.yml @@ -0,0 +1,11 @@ +cad: +- MagnetFrontPanel.f3d +- MagnetFrontPanel.step +description: Mount your front panel using only magnets +images: +- Images/CoverMagnetMount.png +- Images/RailMagnetMount.png +mod_version: 1 +printer_compatibility: +- V2.4 +title: Single Panel Magnet Mount diff --git a/printer_mods/yenda/vsw_more_robust_belt_paths/.metadata.yml b/printer_mods/yenda/vsw_more_robust_belt_paths/.metadata.yml new file mode 100644 index 000000000..ae471b229 --- /dev/null +++ b/printer_mods/yenda/vsw_more_robust_belt_paths/.metadata.yml @@ -0,0 +1,18 @@ +cad: +- cad/motor_mounts v1.f3d +- cad/xz blocks v3.f3d +- cad/upper_xz v6.f3d +description: Small mods to belt routing components to ensure a better/more robust + alignment +images: +- images/upper_xz.png +- images/install_upper_xz_blocks.jpg +- images/motor_cage.png +- images/xz_blocks.png +- images/install_cage_a.jpg +- images/install_cage_b.jpg +- images/install_xz_blocks.jpg +mod_version: 1 +printer_compatibility: +- VSW +title: SW More Robust XZ Belt Paths diff --git a/printer_mods/yeri/V0_Magnetic_Panels/.metadata.yml b/printer_mods/yeri/V0_Magnetic_Panels/.metadata.yml new file mode 100644 index 000000000..9415e968a --- /dev/null +++ b/printer_mods/yeri/V0_Magnetic_Panels/.metadata.yml @@ -0,0 +1,8 @@ +cad: [] +description: Mount V0 panels with magnets, removes need for hinges and lets you easily + detach sides for access +images: [] +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 Magnetic Panels diff --git a/printer_mods/yeri/V1_3Z/.metadata.yml b/printer_mods/yeri/V1_3Z/.metadata.yml new file mode 100644 index 000000000..a84d3bd2a --- /dev/null +++ b/printer_mods/yeri/V1_3Z/.metadata.yml @@ -0,0 +1,15 @@ +cad: [] +description: 3Z mod for V1 +images: +- images/bed_mount.jpg +- images/final_installation_view.jpg +- images/installed_view.jpg +- images/Top_rod_attachment.jpg +- images/bed_mount_installed.jpg +- images/full_assembly.jpg +- images/motor_mount_installed.jpg +- images/motor_mount_installation.jpg +mod_version: 1 +printer_compatibility: +- V1.8 +title: V1 3Z diff --git a/printer_mods/zruncho/V0_No_Drop_Nuts/.metadata.yml b/printer_mods/zruncho/V0_No_Drop_Nuts/.metadata.yml new file mode 100644 index 000000000..525f5b819 --- /dev/null +++ b/printer_mods/zruncho/V0_No_Drop_Nuts/.metadata.yml @@ -0,0 +1,18 @@ +cad: +- cad/NoDropNut_15mm.step +- cad/NoDropNut_Door_Latch_x2.step +- cad/NoDropNut_Rear_Ext_Rear_Edge_x2.step +- cad/NoDropNut_Side_Ext_Side_x2.step +- cad/NoDropNut_12mm.step +- cad/NoDropNut_Rear_Ext_Rear_Center_x1.step +- cad/NoDropNut_Rear_Ext_Front_x2.step +description: Voron0 nut inserts which auto-align (LDO frames only) +images: +- images/sliced.png +- images/z_rear.jpg +- images/z_inside_corner.jpg +- images/z_drive_all.jpg +mod_version: 1 +printer_compatibility: +- V0.2 +title: V0 No-Drop Nuts