128 lines
3.6 KiB
INI
128 lines
3.6 KiB
INI
# This file contains example pin mappings for testing with the
|
|
# "simulavr" program. To use this config, compile the firmware for an
|
|
# AVR atmega644p, enable "low-level configuration options", and enable
|
|
# "simulavr software emulation". Further details are in
|
|
# docs/Debugging.md.
|
|
|
|
# See docs/Config_Reference.md for a description of parameters.
|
|
|
|
# AVR atmega644p Pins:
|
|
# PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7
|
|
# PB0, PB1, PB2, PB3, PB4, PB5, PB6, PB7
|
|
# PC0, PC1, PC2, PC3, PC4, PC5, PC6, PC7
|
|
# PD0, PD1, PD2, PD3, PD4, PD5, PD6, PD7
|
|
|
|
############################################
|
|
### DO NOT CHANGE PIN ASSIGNMENTS !!! ###
|
|
############################################
|
|
# Basic configurations (safe / required to use)
|
|
[include addons/basic_cartesian_kinematics.cfg]
|
|
[include addons/basic_macros.cfg]
|
|
|
|
# Extruder configuration (only one config allowed at a time)
|
|
[include addons/single_extruder.cfg]
|
|
#[include addons/dual_extruder.cfg]
|
|
#[include addons/dual_extruder_stepper.cfg]
|
|
|
|
# Other temperature sensors (only one config allowed at a time)
|
|
[include addons/heater_bed.cfg]
|
|
#[include addons/temp_sensors.cfg]
|
|
|
|
# Miscellaneous (only one active config allowed at a time)
|
|
[include addons/miscellaneous.cfg] # [fan], [heater_fan], [controller_fan], [filament_runout_sensor], [output_pin]
|
|
#[include addons/led_neopixel.cfg] # [neopixel], [led]
|
|
|
|
# Moonraker Plugins
|
|
[include addons/timelapse.cfg]
|
|
|
|
############################################
|
|
### ADDITIONAL CONFIGURATIONS ###
|
|
############################################
|
|
[respond]
|
|
[pause_resume]
|
|
[display_status]
|
|
[exclude_object]
|
|
|
|
[mcu]
|
|
serial: /tmp/pseudoserial
|
|
restart_method: arduino
|
|
|
|
[virtual_sdcard]
|
|
path: ~/printer_data/gcodes
|
|
|
|
[firmware_retraction]
|
|
retract_length: 0.5
|
|
retract_speed: 75
|
|
unretract_speed: 75
|
|
|
|
############################################
|
|
### BED MESH ###
|
|
############################################
|
|
[bed_mesh]
|
|
speed: 120
|
|
horizontal_move_z: 5
|
|
mesh_min: 10, 10
|
|
mesh_max: 225, 225
|
|
probe_count: 5, 5
|
|
|
|
#*# <---------------------- SAVE_CONFIG ---------------------->
|
|
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
|
#*#
|
|
#*# [bed_mesh default]
|
|
#*# version = 1
|
|
#*# points =
|
|
#*# 0.075000, 0.069792, 0.062708, 0.044167, 0.032917
|
|
#*# 0.045417, 0.043958, 0.066042, 0.053333, 0.038750
|
|
#*# 0.034375, 0.023333, 0.032917, 0.054167, 0.043542
|
|
#*# 0.076042, 0.056458, 0.066250, 0.045000, 0.057292
|
|
#*# 0.051875, 0.036875, 0.030000, 0.020625, 0.043125
|
|
#*# tension = 0.2
|
|
#*# min_x = 10
|
|
#*# algo = bicubic
|
|
#*# y_count = 5
|
|
#*# mesh_y_pps = 5
|
|
#*# min_y = 10.0
|
|
#*# x_count = 5
|
|
#*# max_y = 225
|
|
#*# mesh_x_pps = 5
|
|
#*# max_x = 225
|
|
#*#
|
|
#*# [bed_mesh mesh_profile_2]
|
|
#*# version = 1
|
|
#*# points =
|
|
#*# 0.025000, 0.029792, 0.022708, 0.024167, 0.022917
|
|
#*# 0.025417, 0.023958, 0.026042, 0.023333, 0.028750
|
|
#*# 0.024375, 0.023333, 0.022917, 0.024167, 0.023542
|
|
#*# 0.026042, 0.026458, 0.026250, 0.025000, 0.027292
|
|
#*# 0.021875, 0.026875, 0.020000, 0.020625, 0.023125
|
|
#*# tension = 0.2
|
|
#*# min_x = 10
|
|
#*# algo = bicubic
|
|
#*# y_count = 5
|
|
#*# mesh_y_pps = 5
|
|
#*# min_y = 10.0
|
|
#*# x_count = 5
|
|
#*# max_y = 225
|
|
#*# mesh_x_pps = 5
|
|
#*# max_x = 225
|
|
#*#
|
|
#*# [bed_mesh mesh_profile_3]
|
|
#*# version = 1
|
|
#*# points =
|
|
#*# 0.075000, 0.069792, 0.062708, 0.044167, -0.032917
|
|
#*# 0.045417, 0.043958, 0.066042, -0.053333, -0.038750
|
|
#*# 0.034375, 0.023333, -0.032917, -0.054167, -0.043542
|
|
#*# 0.076042, -0.056458, -0.066250, -0.045000, -0.057292
|
|
#*# -0.051875, -0.036875, -0.030000, -0.020625, -0.043125
|
|
#*# tension = 0.2
|
|
#*# min_x = 10
|
|
#*# algo = bicubic
|
|
#*# y_count = 5
|
|
#*# mesh_y_pps = 5
|
|
#*# min_y = 10.0
|
|
#*# x_count = 5
|
|
#*# max_y = 225
|
|
#*# mesh_x_pps = 5
|
|
#*# max_x = 225
|
|
#*#
|