diff --git a/example-configs/addons/led_neopixel.cfg b/example-configs/addons/led_neopixel.cfg
new file mode 100644
index 0000000..b8c08ca
--- /dev/null
+++ b/example-configs/addons/led_neopixel.cfg
@@ -0,0 +1,9 @@
+[neopixel my_neopixel]
+pin: PC0
+chain_count: 1
+color_order: RGBW
+
+[led dummy_led]
+red_pin: PB4
+green_pin: PB5
+blue_pin: PB6
diff --git a/example-configs/addons/miscellaneous.cfg b/example-configs/addons/miscellaneous.cfg
new file mode 100644
index 0000000..af88a9d
--- /dev/null
+++ b/example-configs/addons/miscellaneous.cfg
@@ -0,0 +1,31 @@
+[fan]
+pin: PB4
+off_below: 0.2
+
+[heater_fan heater_fan]
+pin: PB5
+off_below: 0.0
+shutdown_speed: 1.0
+max_power: 1.0
+
+[controller_fan controller_fan]
+pin: PB6
+off_below: 0.2
+shutdown_speed: 1.0
+max_power: 1.0
+
+[filament_motion_sensor runout_sensor]
+switch_pin: PC1
+detection_length: 1.0
+extruder: extruder
+pause_on_runout: FALSE
+runout_gcode:
+  M117 Runout sensor reports: Runout G-Code
+insert_gcode:
+  M117 Runout sensor reports: Insert G-Code
+
+[output_pin output_pin]
+pin: PC0
+pwm: false
+shutdown_value: 0
+value: 1
\ No newline at end of file
diff --git a/example-configs/printer.cfg b/example-configs/printer.cfg
index 16c49e3..c2d894e 100644
--- a/example-configs/printer.cfg
+++ b/example-configs/printer.cfg
@@ -28,8 +28,12 @@
 [include addons/heater_bed.cfg]
 #[include addons/temp_sensors.cfg]
 
-# Other addons
-#[include addons/timelapse.cfg]
+# Miscellaneous (only one active config allowed at a time)
+[include addons/miscellaneous.cfg.cfg] # [fan], [heater_fan], [controller_fan], [filament_runout_sensor], [output_pin]
+#[include addons/led_neopixel.cfg] # [neopixel], [led]
+
+# Moonraker Plugins
+[include addons/timelapse.cfg]
 
 ############################################
 ###       ADDITIONAL CONFIGURATIONS      ###
@@ -37,6 +41,7 @@
 [respond]
 [pause_resume]
 [display_status]
+[exclude_object]
 
 [mcu]
 serial: /tmp/pseudoserial
@@ -50,41 +55,6 @@ retract_length: 0.5
 retract_speed: 75
 unretract_speed: 75
 
-############################################
-###            MISCELLANEOUS             ###
-############################################
-[fan]
-pin: PB4
-off_below: 0.2
-
-[heater_fan heater_fan]
-pin: PB5
-off_below: 0.0
-shutdown_speed: 1.0
-max_power: 1.0
-
-[controller_fan controller_fan]
-pin: PB6
-off_below: 0.2
-shutdown_speed: 1.0
-max_power: 1.0
-
-[filament_motion_sensor runout_sensor]
-switch_pin: PC1
-detection_length: 1.0
-extruder: extruder
-pause_on_runout: FALSE
-runout_gcode:
-  M117 Runout sensor reports: Runout G-Code
-insert_gcode:
-  M117 Runout sensor reports: Insert G-Code
-
-[output_pin output_pin]
-pin: PC0
-pwm: false
-shutdown_value: 0
-value: 1
-
 ############################################
 ###               BED MESH               ###
 ############################################