# Voron V0.xxx Klipper Profile

Software:
- [Raspberry Pi OS Lite "Buster"](https://www.raspberrypi.org/software/operating-systems/#raspberry-pi-os-32-bit)
- [Klipper](https://github.com/KevinOConnor/klipper)
- [Moonraker](https://github.com/Arksine/moonraker)
- [Mainsail](https://github.com/meteyou/mainsail)

Hardware:
- Raspberry Pi Zero W
- BigTreeTech SKR mini E3 V2.0 Controller

Mods/Deviations (W.R.T. Stock V0.1):
- Changed controller chamber fans to be controlled by each SKR (fans only operate when the drivers are active).
- Cork insulation directly under hotbed to protect electronic chamber from direct/radiated heat.

Updates:
- Inital config. Build in progress.

- - - 
This repo based on f0or1s' [cr10_klipper repo](http://github.com/fl0r1s/cr10_klipper), rpanfili's [woron-ht repo](http://github.com/rpanfili/voron-ht), and Zellneralex's [klipper_config repo](http://github.com/zellneralex/klipper_config) among many others.
It is a work in progress as I keept finding new and better ways to organize/tune my setup.