#####################################################################
#  Lighting Control
#####################################################################

##   Neopixel interface
[neopixel neo_leds]
pin: RGB
chain_count: 17
color_order: GRBW
initial_RED: 0.0
initial_GREEN: 0.0
initial_BLUE: 0.0
initial_WHITE: 0.1

#####################################################################
#  Macros
#####################################################################

[gcode_macro _CASELIGHT]
default_parameter_COLOR: 'white'
variable_colors: { 'red': (1.0, 0.0, 0.0, 0.0),
                'orange': (1.0, 0.5, 0.0, 0.0),
                'yellow': (1.0, 1.0, 0.0, 0.0),
             'charteuse': (0.5, 1.0, 0.0, 0.0),
                 'green': (0.0, 1.0, 0.0, 0.0),
             'turquiose': (0.0, 1.0, 0.5, 0.0),
           'springgreen': (0.0, 1.0, 0.5, 0.0),
                  'cyan': (0.0, 1.0, 1.0, 0.0),
                 'azure': (0.0, 0.5, 1.0, 0.0),
                 'ocean': (0.0, 0.5, 1.0, 0.0),
                  'blue': (0.0, 0.0, 1.0, 0.0),
                'violet': (0.5, 0.0, 1.0, 0.0),
                'purple': (0.5, 0.0, 1.0, 0.0),
               'magenta': (1.0, 0.0, 1.0, 0.0),
             'raspberry': (1.0, 0.0, 0.5, 0.0),
                  'rose': (1.0, 0.0, 0.5, 0.0),
                 'white': (0.0, 0.0, 0.0, 4.0),
                   'off': (0.0, 0.0, 0.0, 0.0) }
variable_leds: [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16]
gcode:
  # Grab the color values
  {% set tuple = colors.get(COLOR|lower, (0.0, 0.0, 0.0, 0.7)) %}
  {% set R = tuple[0] %}
  {% set G = tuple[1] %}
  {% set B = tuple[2] %}
  {% set W = tuple[3] %}

  {action_respond_info("LED Tuple: {0}".format(tuple))}

  {% for I in leds %}
    SET_LED LED=neo_leds RED={R} GREEN={G} BLUE={B} WHITE={W} INDEX={I} TRANSMIT={loop.last|int} SYNC=0
  {% endfor %}

[gcode_macro _caselight_state]
gcode:
  {action_respond_info("Caselight %s" % (printer["gcode_macro CASELIGHT"].state))}

[gcode_macro _CASELIGHT_ON]
gcode:
  SET_GCODE_VARIABLE MACRO=CASELIGHT VARIABLE=state VALUE='"on"'
  _CASELIGHT
  _caselight_state

[gcode_macro _CASELIGHT_OFF]
gcode:
  SET_GCODE_VARIABLE MACRO=CASELIGHT VARIABLE=state VALUE='"off"'
  _CASELIGHT color='"off"'
  _caselight_state

[gcode_macro CASELIGHT]
variable_state: 'on'
gcode:
  {%if printer['gcode_macro CASELIGHT'].state == "off" %}
    _CASELIGHT_ON
  {% else %}
    _CASELIGHT_OFF
  {% endif %}

[delayed_gcode _STATUS_LED_INIT]
initial_duration: 1
gcode:
  _STATUS_LED COLOR=BLUE

[gcode_macro _STATUS_LED]
default_parameter_BLINK: 0
variable_color: 'ORANGE'
variable_restore: 'GREEN'
variable_index: 17
variable_blink: 0
variable_blinkNext: 0
gcode:
 {% set var_color=printer["gcode_macro _STATUS_LED"].color %}
  {% set var_restore=printer["gcode_macro _STATUS_LED"].restore %}
  SET_GCODE_VARIABLE MACRO=_STATUS_LED VARIABLE=blink VALUE={BLINK}
  UPDATE_DELAYED_GCODE ID=_STATUS_LED_BLINK_DELAY DURATION={BLINK|float}
  SET_GCODE_VARIABLE MACRO=_STATUS_LED VARIABLE=restore VALUE='"{var_color}"'
  {% if params.COLOR %}
    #_SET_LEDS color={COLOR} index={var_index}
  {% else %}
    #_SET_LEDS color={var_restore} index={var_index}
  {% endif %}

[delayed_gcode _STATUS_LED_BLINK_DELAY]
gcode:
  {% set var_color=printer["gcode_macro _STATUS_LED"].color %}
  {% if printer["gcode_macro _STATUS_LED"].blinkNext|int == 0 %}
    SET_GCODE_VARIABLE MACRO=_STATUS_LED VARIABLE=blinkNext VALUE=1
    STATUS_LED color={COLOR}
  {% else %}
    SET_GCODE_VARIABLE MACRO=_STATUS_LED VARIABLE=blinkNext VALUE=0
    _STATUS_LED color='off'
  {% endif %}
  UPDATE_DELAYED_GCODE ID=_BLINK_DELAY DURATION={printer["gcode_macro _STATUS_LED"].blink|float}