Change start/end macros for V0

macros.d/start_end.cfg

@@ -9,38 +9,53 @@
 variable_parameter_T_BED: 60
 variable_parameter_T_EXTRUDER: 190
 gcode:
-    CLEAR_PAUSE
+    ##### Get Boundaries #####
+    {% set max_x = printer.toolhead.axis_maximum.x|float %}
+    {% set max_y = printer.toolhead.axis_maximum.y|float %}
+    {% set max_z = printer.toolhead.axis_maximum.z|float %}
+    {% set mid_x = max_x / 2 %}
+    {% set mid_y = max_y / 2 %}
 
-    # Perform a G28 'home' (if needed), wait for the bed to finish heating and do a QGL
-    SMARTHOME
-    SMARTQGL
+    CLEAR_PAUSE
+    G90
+
+    # Hold the hotend temperature (useful for reprints)
+    M104 S{printer.extruder.temperature}
 
     # Start preheating the bed
-    M117 Heating bed/toolhead
+    M117 Heating bed
     _LCD_KNOB COLOR=RED BLINK=1
     M140 S{T_BED}
+
+    # Perform a G28 'home' (if needed)
+    SMARTHOME
+
+    # Check to see if we need more time preheating the bed, if so
+    {% if printer.heater_bed.temperature < params.T_BED|float*0.85 %}
+        M117 Heating bed to 85%
+        G1 X{mid_x} Y{mid_y} Z10 F6000
+        M106
+        M190 S{params.T_BED|float*0.85}
+    {% endif %}
+
+    M117 Heating bed/toolhead
+    {% if printer.extruder.temperature < params.T_EXTRUDER|float*0.75 %}
        M104 S{params.T_EXTRUDER|float*0.75}
-    G0 Z30 F1800
-    G0 X175 Y175 Z10 F6000
-
-    # Perform a G28 'home' (if needed), wait for the bed to finish heating and do a QGL
+    {% endif %}
     M190 S{T_BED}
-    ;LOAD_MESH_TEMP BED_TEMPERATURE{T_BED}
-    BED_MESH_PROFILE LOAD=default
-
-    # Hover over purge bucket, wait for the hotend to finish, then purge/wipe and rehome Z
-    G0 X46 Y350 Z10 F18000
-    M109 S{T_EXTRUDER}
-    clean_nozzle
-    G28 Z
+    M107
 
     # Move the nozzle near the bed
-    G0 X4.1 Y0.1 Z2.0 F6000
+    G1 X0.1 Y0.1 Z2.0 F6000
     G1 Z0.3 F6000
 
+    M117 Heating toolhead
+    M109 S{T_EXTRUDER}
+
     # Prime line
     PRIME_EXTRUDER
-    M117
+    M117 Printing
+
 
 
 [gcode_macro END_PRINT]
@@ -77,11 +92,12 @@ gcode:
     G92 E0
     G1 E-2 F1800
     G91
-    G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
+    G0 Z{z_safe} F3600
+    G0 X{x_safe} Y{y_safe} F20000  ; move nozzle to remove stringing
     TURN_OFF_HEATERS
     M107
     G90
-    G0 X46 Y350 F18000                         ; Park over purge bucket
+    G0 X60 Y{max_y} F18000
     BED_MESH_CLEAR
     M300                                     ; Play a tone
     _LCD_KNOB COLOR=GREEN