Retool of macros to remove default_parameters

Due to Klipper deprecating this function

homing.cfg

@@ -18,8 +18,6 @@ gcode:
     {% endif %}
 
 [gcode_macro _SET_ACC]
-default_parameter_VAL: RUN
-default_parameter_HOMING_ACCEL: 500
 variable_accel: 0
 variable_accel_to_decel: 0
 variable_last_val: 'RUN'
@@ -28,7 +26,7 @@ gcode:
     # store old values and apply home value
     SET_GCODE_VARIABLE MACRO=_SET_ACC VARIABLE=accel VALUE={printer.toolhead.max_accel}
     SET_GCODE_VARIABLE MACRO=_SET_ACC VARIABLE=accel_to_decel VALUE={printer.toolhead.max_accel_to_decel}
-    {% set accel = HOMING_ACCEL %}
+    {% set accel = HOMING_ACCEL|default(500) %}
     {% set accel_to_decel = HOMING_ACCEL %}
   {% elif VAL == 'CONFIG' %}
     # set all to config values

macros.d/functions.cfg

@@ -23,35 +23,19 @@ gcode:
 
 
 [gcode_macro _SET_Z_CURRENT]
-default_parameter_VAL: RUN
 variable_last_val: 'RUN'
 gcode:
   {% if VAL == 'HOME' %}
     {% set z_run   = 0.3 %}
-    {% set z1_run  = 0.3 %}
-    {% set z2_run  = 0.3 %}
-    {% set z3_run  = 0.3 %}
     {% set z_hold  = 0.3 %}
-    {% set z1_hold = 0.3 %}
-    {% set z2_hold = 0.3 %}
-    {% set z3_hold = 0.3 %}
   {% else %}
     {% set z_run   = printer.configfile.settings["tmc2209 stepper_z"]["run_current"] %}
-    {% set z1_run  = printer.configfile.settings["tmc2209 stepper_z1"]["run_current"] %}
-    {% set z2_run  = printer.configfile.settings["tmc2209 stepper_z2"]["run_current"] %}
-    {% set z3_run  = printer.configfile.settings["tmc2209 stepper_z3"]["run_current"] %}
     {% set z_hold  = printer.configfile.settings["tmc2209 stepper_z"]["hold_current"] %}
-    {% set z1_hold = printer.configfile.settings["tmc2209 stepper_z1"]["hold_current"] %}
-    {% set z2_hold = printer.configfile.settings["tmc2209 stepper_z2"]["hold_current"] %}
-    {% set z3_hold = printer.configfile.settings["tmc2209 stepper_z3"]["hold_current"] %}
   {% endif %}
   {% if VAL != printer["gcode_macro _SET_Z_CURRENT"].last_val|string  %}
     SET_GCODE_VARIABLE MACRO=_SET_Z_CURRENT VARIABLE=last_val VALUE='"{VAL}"'
     {action_respond_info("Home&Probe: RunCur %.2f HoldCur %.2f" % (z_run|float, z_hold|float))}
     SET_TMC_CURRENT STEPPER=stepper_z  CURRENT={z_run}  HOLDCURRENT={z_hold}
-    SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={z1_run} HOLDCURRENT={z1_hold}
-    SET_TMC_CURRENT STEPPER=stepper_z2 CURRENT={z2_run} HOLDCURRENT={z2_hold}
-    SET_TMC_CURRENT STEPPER=stepper_z3 CURRENT={z3_run} HOLDCURRENT={z3_hold}
     M400
   {% endif %}
 

macros.d/gcodes.cfg

@@ -55,20 +55,8 @@ gcode:
 
 ##   Filament Change
 [gcode_macro M600]
-default_parameter_X: 50
-default_parameter_Y: 0
-default_parameter_Z: 10
 gcode:
-    M117 Filament Change
-    SAVE_GCODE_STATE NAME=filament_change
     PAUSE
-    G91 # relative
-    G1 E-1 F300 # retract 1
-    M125 # park
-    M702 # unload
-    M0 Click when filament inserted
-    M701 # load
-    RESTORE_GCODE_STATE NAME=filament_change
 
 
 ##   TMC Debugging
@@ -104,10 +92,9 @@ gcode:
 
 ##   Wait for Chamber Temperature
 [gcode_macro M191]
-default_parameter_R: 30
-default_parameter_S: 30
 gcode:
-   TEMPERATURE_WAIT SENSOR="temperature_sensor chamber" MINIMUM={S}
+   {% set MIN = params.S|default(30) %}
+   TEMPERATURE_WAIT SENSOR="temperature_sensor chamber" MINIMUM={MIN}
 
 # M201 - Set Print Max Acceleration
 [gcode_macro M201]

webclient.cfg

@@ -90,33 +90,28 @@ gcode:
 #####################################################################
 [gcode_macro PAUSE]
 rename_existing: BASE_PAUSE
-default_parameter_X: 60     #edit to your park position
-default_parameter_Y: 0      #edit to your park position
-default_parameter_Z: 5      #edit to your park position
-default_parameter_E: 0.2    #edit to your retract length
 gcode:
     SAVE_GCODE_STATE NAME=PAUSE_state
     BASE_PAUSE
 
     # Anti-Stringing
     G91                 ; relative positioning
-    G1 E-{E} F2100      ; retract filament
+    G1 E-{E|default(0.2)} F2100      ; retract filament
     G1 X1 F20000        ; move 1mm to the side at 333mm/sec
     G90                 ; absolute positioning (avoid G2 in rel mode erroring out)
     G2 E0 I-1           ; do a no extrusion circle move with a 0.5mm radius centered on orig
     G91                 ; relative positioning (avoid G2 in rel mode erroring out)
-    G1 Z{Z} F3000      ; move up by 5mm @ 50mm/sec to clear the print
+    G1 Z{Z|default(5)} F3000      ; move up by 5mm @ 50mm/sec to clear the print
     G90                 ; absolute positioning
 
-    G1 X{X} Y{Y} F6000  ; Move toolhead to park location
+    G1 X{X|default(60)} Y{Y|default(0)} F6000  ; Move toolhead to park location
 
 
 [gcode_macro RESUME]
 rename_existing: BASE_RESUME
-default_parameter_E: 0.2    #edit to your retract length
 gcode:
     G91
-    G1 E{E} F2100
+    G1 E{E|default(0.2)} F2100
     G90
     RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
     BASE_RESUME
@@ -124,9 +119,6 @@ gcode:
 
 [gcode_macro CANCEL_PRINT]
 rename_existing: BASE_CANCEL_PRINT
-default_parameter_X: 0    #edit to your park position
-default_parameter_Y: 0    #edit to your park position
-default_parameter_Z: 117  #edit to your park position
 gcode:
     M104 S0
     M140 S0