4058b94da0
* Kirigami_LED_Bed_Front.stl Kirigami bed front with space for LED (Neopixel or equivalent) * Add files via upload * Delete printer_mods/reQu1em00/Kirigami_LED_Bed_Front/STL directory * Create README.md * Create STL * Delete STL * Create STL * Add files via upload * Delete STL * Update README.md * update of readme to amend spelling mistake * Delete Kirigami_LED_Bed_Front.stl * Delete Kirigami_LED_Bed_Front_defuser.stl * Create STL * Delete STL * Add files via upload updated stls. Rechecked and, repaired |
||
|---|---|---|
| .. | ||
| Kirigami_Bed_LED_Diffuser .stl | ||
| Kirigami_Bed_LED_Front.stl | ||
| README.md | ||
README.md
V0 Kirigami bed front with space for LED
This is a modifaction of the V0 Kirigami front bed made by Kosh42EFG
BOM
- Kirigami bed: https://github.com/christophmuellerorg/voron_0_kirigami_bed
- 1x Kirigami_LED_Bed_Front.stl printed in ABS using standard Voron settings
- 1x Kirigami_LED_Bed_Front_defuser.stl printed in any white material
- 2x M3x8 CHCS
- 2x M3 nuts
- 1x LED. I use a single neopixel mini button
- 4x wires for the neopixel (you can use three if this is the only one in the chain)
Installation
- Install the kirigami bed
- Wire the neopixel and place in the slot with the wires coming out through the tunnel
- Add the defuser in front of the neopixel, make sure it is a tight fit to hold it well (print thicker if needed)
- Fit the Kirigami_LED_Bed_Front.stl to the front of the kirigami bed using the M3 screws and nuts
- Add configuration change to the printer.cfg in klipper:
- [neopixel my_leds]
- pin: PA8
- chain_count: 1
- color_order: GRB
- initial_RED: 1.0
- initial_GREEN: 0.0
- initial_BLUE: 0.0