134 lines
5.8 KiB
Plaintext
134 lines
5.8 KiB
Plaintext
; Configuration file for Duet WiFi (firmware version 2.03 or newer)
|
|
; executed by the firmware on start-up
|
|
|
|
; General preferences
|
|
M111 S0 ; Debugging off
|
|
G21 ; Work in millimetres
|
|
G90 ; Send absolute coordinates...
|
|
M83 ; ...but relative extruder moves
|
|
M555 P2 ; Set firmware compatibility to look like Marlin
|
|
M575 P1 B57600 S1 ; Comms parameters for PanelDue
|
|
M564 S1 H1 ; Forbid axis movements when not homed
|
|
|
|
; General setup
|
|
M667 S1 ; Select CoreXY mode (2.03RC1 and below)
|
|
M669 K1 ; Select CoreXY mode (2.03 and up)
|
|
|
|
; Network
|
|
M550 PVoron V2.015 ; Set machine name
|
|
M552 S1 ; Enable network
|
|
M586 P0 S1 ; Enable HTTP (for DWC)
|
|
M586 P1 S1 ; Enable FTP (for remote backups)
|
|
M586 P2 S0 ; Disable Telnet
|
|
|
|
; --- drive map ---
|
|
; _______
|
|
; | 6 | 7 |
|
|
; | ----- |
|
|
; | 5 | 8 |
|
|
; -------
|
|
; front
|
|
|
|
; Drive directions
|
|
M569 P0 S1 ; A
|
|
M569 P1 S1 ; B
|
|
M569 P3 S1 ; Extruder #1
|
|
M569 P4 S0 ; Extruder #2
|
|
M569 P5 S0 ; Z1
|
|
M569 P6 S1 ; Z2
|
|
M569 P7 S0 ; Z3
|
|
M569 P8 S1 ; Z4
|
|
|
|
; Motor mapping and steps per mm
|
|
M584 X0 Y1 Z5:6:7:8 E3:4
|
|
M350 X16 Y16 Z16 E16:16 I1 ; Use 1/16 microstepping with interpolation everywhere
|
|
;M92 X80 Y80 Z400 ; Set XYZ steps per mm (1.8deg motors)
|
|
M92 X160 Y160 Z800 ; Set XYZ steps per mm (0.9deg motors)
|
|
M92 E560:560 ; Set Extruder steps per mm (Mobius 3)
|
|
|
|
;M350 Z16 I0 ; disable Z interpolation
|
|
|
|
; Drive currents
|
|
M906 X1200 Y1200 Z1200 E1000 ; XYZ and E current
|
|
M906 I30 ; Idle current percentage
|
|
M84 S120 ; Idle timeout
|
|
|
|
; Endstops
|
|
M574 X2 Y2 Z0 S1 ; Set NC endstops for X and Y, no Z endstop (we have multiple probes instead)
|
|
M208 X-9 Y0 Z0 S1 ; Set axis minima
|
|
M208 X313 Y309 Z275 S0 ; Set axis maxima
|
|
|
|
; Bed leveling
|
|
M671 X-65:-65:365:365 Y-20:380:380:-20 S20 ; Define Z belts locations (Front_Left, Back_Left, Back_Right, Front_Right)
|
|
M557 X25:275 Y25:275 S25 ; Define bed mesh grid (inductive probe, positions include the Z offset!)
|
|
;M557 X25:275 Y25:275 S50 ; Define bed mesh grid (bed piezo)
|
|
|
|
; Accelerations and speed
|
|
M98 P"/macros/print_scripts/speed_printing.g"
|
|
|
|
; Bed Heater
|
|
;M305 P0 R4700 T100000 B3950 ; Set thermistor + ADC parameters for heater 0
|
|
;M307 H0 A90.0 C700.0 D10.0 S1.00 B1 ; Bang-bang bed
|
|
;M143 H0 S110 ; Set temperature limit for bed heater to 110C
|
|
|
|
; Bed heater, dual thermistor setup (one for the heater + one for the bed)
|
|
M305 S"Bed Plate" P0 X0 R4700 T100000 B3950 ; Beta3950 stud thermistor on the edge of the plate
|
|
M307 H0 B1 S1 ; 100% PWM, bang-bang mode
|
|
M305 S"Bed Heater" P103 X3 R4700 T100000 B3950 ; Beta3950 thermistor inside the Keenovo heater
|
|
M143 P100 H0 X103 A2 C0 S110 ; make sure silicone heater stays below 110°C
|
|
M143 P101 H0 X103 A1 C0 S125 ; make sure silicone heater shuts down at 125°C
|
|
M143 H0 S110 ; maximum bed temperature
|
|
|
|
; Hotend #1 heater
|
|
; M307 values are for reference only, RRF stores them in config-override.g via M500 after a PID calibration.
|
|
;M305 P1 R4700 T100000 B4725 C0.0000000706 ; Set thermistor + ADC parameters for heater 1
|
|
;M307 H1 A454.1 C235.9 D4.5 S1.00 B0 ; 104GT2 PID, 30W heater
|
|
|
|
; Hotend #1 heater
|
|
M305 S"Hotend" P1 X200 W4 ; 1st nozzle is 4-wire PT100, first channel
|
|
;M307 H1 A568.8 C203.2 D4.0 S1.00 V24.5 B0 ; E3D V6 + PT100 PID, 30W heater
|
|
;M307 H1 A365.9 C236.7 D4.9 S1.00 V24.5 B0 ; E3D Volcano + PT100 PID, 30W heater
|
|
;M307 H1 A614.3 C180.2 D5.3 S1.00 V24.4 B0 ; Mosquito + PT100 PID, 50W heater
|
|
M143 H1 S300 ; Set temperature limit for heater 1 to 300C
|
|
|
|
; Hotend #2 heater
|
|
;M305 P2 R4700 T100000 B4725 C0.0000000706 ; Set thermistor + ADC parameters for heater 2
|
|
;M307 H2 A454.1 C235.9 D4.5 S1.00 B0 ; 104GT2 PID, 30W heater
|
|
|
|
; Hotend #2 heater
|
|
;M307 H2 A568.8 C203.2 D4.0 S1.00 V24.5 B0 ; PT100 PID, 30W heater
|
|
M305 P2 X201 ; PT100, second channel
|
|
M143 H2 S300 ; Set temperature limit for heater 2 to 300C
|
|
|
|
; Chamber temperature sensor via temperature daughterboard pins on Duex
|
|
M305 S"Ambient" P104 X405 T21 ; Set DHT21 for chamber temp
|
|
M305 S"Humidity [%]" P105 X455 T21 ; Set DHT21 for chamber humidity
|
|
|
|
; Disable unused heaters (so they are hidden on the PanelDue)
|
|
M307 H2 A-1 C-1 D-1
|
|
M307 H3 A-1 C-1 D-1
|
|
M307 H4 A-1 C-1 D-1
|
|
M307 H5 A-1 C-1 D-1
|
|
M307 H6 A-1 C-1 D-1
|
|
M307 H7 A-1 C-1 D-1
|
|
|
|
; Select inductive Z probe on powerup
|
|
M98 P"/macros/print_scripts/activate_z_probe.g"
|
|
|
|
; Fans
|
|
;M106 P3 S1 I0 H1 T50 ; E3D V6 Hotend fan, turns on if temperature sensor 1 reaches 50 degrees
|
|
M106 P3 S0.6 I0 H1 T50 ; Mosquito Hotend fan @ 60%, turns on if temperature sensor 1 reaches 50 degrees
|
|
M106 P4 S0 I0 H-1 ; Part cooling fan, no thermostatic control
|
|
;M106 P5 T45:65 F50 H100:101:102 ; Electronics bay fan, turn on gradually if MCU is over 45C or any TMC driver is over temp
|
|
M106 P8 S1 H0 T50 ; Chamber filter fan, turn on when bed is hotter than 50C
|
|
|
|
; Tools
|
|
M563 P0 D0 H1 F4 ; Define tool 0, use fan #4 for M106
|
|
G10 P0 X0 Y0 Z0 ; Set tool 0 axis offsets
|
|
G10 P0 R0 S0 ; Set initial tool 0 active and standby temperatures to 0C
|
|
|
|
; Pressure advance
|
|
M572 D0 S0.2
|
|
|
|
M501 ; load config-override.g
|
|
T0 ; select tool 0 |