History

chilicoke 4c2588640c Low profile exhaust fan duct adapter by chilicoke (#46 ) Adapts 4" dryer flexable duct to your 120mm exhaust fan. Part needs to be assumbled with super glue, also requires 6mm magnets for the quick release.		2020-01-28 09:03:32 +01:00
..
README.md	Low profile exhaust fan duct adapter by chilicoke (#46 )	2020-01-28 09:03:32 +01:00
duct_connecting_tube.v2.stl	Low profile exhaust fan duct adapter by chilicoke (#46 )	2020-01-28 09:03:32 +01:00
duct_grill.stl	Low profile exhaust fan duct adapter by chilicoke (#46 )	2020-01-28 09:03:32 +01:00
duct_lower_body.v2.stl	Low profile exhaust fan duct adapter by chilicoke (#46 )	2020-01-28 09:03:32 +01:00
duct_rear_body.v2.stl	Low profile exhaust fan duct adapter by chilicoke (#46 )	2020-01-28 09:03:32 +01:00
fan_magnetic_grill.stl	Low profile exhaust fan duct adapter by chilicoke (#46 )	2020-01-28 09:03:32 +01:00
glue_surfaces.png	Low profile exhaust fan duct adapter by chilicoke (#46 )	2020-01-28 09:03:32 +01:00
installed.jpg	Low profile exhaust fan duct adapter by chilicoke (#46 )	2020-01-28 09:03:32 +01:00

README.md

Low Profile Exhaust Duct Adapter

This adapter allows you to fit 4" flexable dryer duct to your 120mm exhaust fan with minimal rear protrusion. It is quick release held on with magnets.

Part needs to be assumbled with super glue, also requires minimum 8 6x4mm disk magnets for the quick release. Multiple thinner magents can also be used if stacked together for additional pull strength. Holes for magnets should be pressed fit if printed with .4mm nozzle, Mine were printed with .8 and they needed to be reamed for a good fit.

You will also need to replace the 4x fan screws with longer M3x35 SHCS.